Search This Blog

Friday, September 1, 2023

Torpedo

From Wikipedia, the free encyclopedia
Bliss–Leavitt Mark 8 torpedo

A modern torpedo is an underwater ranged weapon launched above or below the water surface, self-propelled towards a target, and with an explosive warhead designed to detonate either on contact with or in proximity to the target. Historically, such a device was called an automotive, automobile, locomotive, or fish torpedo; colloquially a fish. The term torpedo originally applied to a variety of devices, most of which would today be called mines. From about 1900, torpedo has been used strictly to designate a self-propelled underwater explosive device.

While the 19th-century battleship had evolved primarily with a view to engagements between armored warships with large-caliber guns, the invention and refinement of torpedoes from the 1860s onwards allowed small torpedo boats and other lighter surface vessels, submarines/submersibles, even improvised fishing boats or frogmen, and later light aircraft, to destroy large ships without the need of large guns, though sometimes at the risk of being hit by longer-range artillery fire.

Modern torpedoes are classified variously as lightweight or heavyweight; straight-running, autonomous homers, and wire-guided types. They can be launched from a variety of platforms. In modern warfare, a submarine-launched torpedo is almost certain to hit its target; the best defense is a counterattack using another torpedo.

Etymology

The word torpedo comes from the name of a genus of electric rays in the order Torpediniformes, which in turn comes from the Latin torpere ("to be stiff or numb"). In naval usage, the American Robert Fulton introduced the name to refer to a towed gunpowder charge used by his French submarine Nautilus (first tested in 1800) to demonstrate that it could sink warships.

History

Middle Ages

Torpedo-like weapons were first proposed many centuries before they were successfully developed. For example, in 1275, Arab engineer Hasan al-Rammah – who worked as a military scientist for the Mamluk Sultanate of Egypt – wrote that it might be possible to create a projectile resembling "an egg", which propelled itself through water, whilst carrying "fire".

Early naval mines

Fulton's torpedo
Confederates laying naval mines in Charleston Harbor

In modern language, a "torpedo" is an underwater self-propelled explosive, but historically, the term also applied to primitive naval mines and spar torpedoes. These were used on an ad hoc basis during the early modern period up to the late 19th century. In the early 17th century, torpedoes were created by the Dutchman Cornelius Drebbel in the employ of King James I of England; he attached explosives to the end of a beam affixed to one of his submarines, now known as spar torpedoes, and they were used (to little effect) during the English expeditions to La Rochelle in 1626. An early submarine, Turtle, attempted to lay a bomb with a timed fuse on the hull of HMS Eagle during the American Revolutionary War, but failed in the attempt.

In the early 1800s, the American inventor Robert Fulton, while in France, "conceived the idea of destroying ships by introducing floating mines under their bottoms in submarine boats". He coined the term "torpedo" about the explosive charges with which he outfitted his submarine Nautilus. However, both the French and the Dutch governments were uninterested in the submarine. Fulton then concentrated on developing the torpedo-like weapon independent of a submarine deployment, and in 1804 succeeded in convincing the British government to employ his 'catamaran' against the French. An April 1804 torpedo attack on French ships anchored at Boulogne, and a follow-up attack in October, produced several explosions but no significant damage and the weapon was abandoned.

Fulton carried out a demonstration for the US government on 20 July 1807, destroying a vessel in New York's harbor. Further development languished as Fulton focused on his "steam-boat matters". After the War of 1812 broke out, the Royal Navy established a blockade of the East Coast of the United States. During the war, American forces unsuccessfully attempted to destroy the British ship of the line HMS Ramillies while it was lying at anchor in New London, Connecticut's harbor with torpedoes launched from small boats. This prompted the captain of Ramillies, Sir Thomas Hardy, 1st Baronet, to warn the Americans to cease using this "cruel and unheard-of warfare" or he would "order every house near the shore to be destroyed". The fact that Hardy had been previously so lenient and considerate to the Americans led them to abandon such attempts with immediate effect.

Torpedoes were used by the Russian Empire during the Crimean War in 1855 against British warships in the Gulf of Finland. They used an early form of chemical detonator. During the American Civil War, the term torpedo was used for what is today called a contact mine, floating on or below the water surface using an air-filled demijohn or similar flotation device. These devices were very primitive and apt to prematurely explode. They would be detonated on contact with the ship or after a set time, although electrical detonators were also occasionally used. USS Cairo was the first warship to be sunk in 1862 by an electrically-detonated mine. Spar torpedoes were also used; an explosive device was mounted at the end of a spar up to 30 feet (9.1 m) long projecting forward underwater from the bow of the attacking vessel, which would then ram the opponent with the explosives. These were used by the Confederate submarine H. L. Hunley to sink USS Housatonic although the weapon was apt to cause as much harm to its user as to its target. Rear Admiral David Farragut's famous/apocryphal command during the Battle of Mobile Bay in 1864, "Damn the torpedoes, full speed ahead!" refers to a minefield laid at Mobile, Alabama.

NMS Rândunica

On 26 May 1877, during the Romanian War of Independence, the Romanian spar torpedo boat Rândunica attacked and sank the Ottoman river monitor Seyfi. This was the first instance in history when a torpedo boat sank its targets without also sinking.

Invention of the modern torpedo

Whitehead torpedo's general profile: A. war-head B. air-flask. B'. immersion chamber C'. after-body C. engine room D. drain holes E. shaft tube F. steering-engine G. bevel gear box H. depth index I. tail K. charging and stop-valves L. locking-gear M. engine bed-plate P. primer case R. rudder S. steering-rod tube T. guide stud U. propellers V. valve-group W. war nose Z. strengthening band

A prototype of the self-propelled torpedo was created on a commission placed by Giovanni Luppis, an Austro-Hungarian naval officer from Rijeka (modern-day Croatia), at the time a port city of the Austro-Hungarian Monarchy and Robert Whitehead, an English engineer who was the manager of a town factory. In 1864, Luppis presented Whitehead with the plans of the Salvacoste ("Coastsaver"), a floating weapon driven by ropes from the land that had been dismissed by the naval authorities due to the impractical steering and propulsion mechanisms.

In 1866, Whitehead invented the first effective self-propelled torpedo, the eponymous Whitehead torpedo, the first modern torpedo. French and German inventions followed closely, and the term torpedo came to describe self-propelled projectiles that traveled under or on water. By 1900, the term no longer included mines and booby-traps as the navies of the world added submarines, torpedo boats and torpedo boat destroyers to their fleets.

Whitehead was unable to improve the machine substantially, since the clockwork motor, attached ropes, and surface attack mode all contributed to a slow and cumbersome weapon. However, he kept considering the problem after the contract had finished, and eventually developed a tubular device, designed to run underwater on its own, and powered by compressed air. The result was a submarine weapon, the Minenschiff (mine ship), the first modern self-propelled torpedo, officially presented to the Austrian Imperial Naval commission on 21 December 1866.

The first trials were not successful as the weapon was unable to maintain a course at a steady depth. After much work, Whitehead introduced his "secret" in 1868 which overcame this. It was a mechanism consisting of a hydrostatic valve and pendulum that caused the torpedo's hydroplanes to be adjusted to maintain a preset depth.

Production and spread

Robert Whitehead (right) invented the first modern torpedo in 1866. Pictured examining a battered test torpedo in Rijeka c. 1875.

After the Austrian government decided to invest in the invention, Whitehead started the first torpedo factory in Rijeka. In 1870, he improved the devices to travel up to approximately 1,000 yards (910 m) at a speed of up to 6 knots (11 km/h), and by 1881 the factory was exporting torpedoes to ten other countries. The torpedo was powered by compressed air and had an explosive charge of gun-cotton. Whitehead went on to develop more efficient devices, demonstrating torpedoes capable of 18 knots (33 km/h) in 1876, 24 knots (44 km/h) in 1886, and, finally, 30 knots (56 km/h) in 1890.

Royal Navy (RN) representatives visited Rijeka for a demonstration in late 1869, and in 1870 a batch of torpedoes was ordered. In 1871, the British Admiralty paid Whitehead £15,000 for certain of his developments and production started at the Royal Laboratories in Woolwich the following year. In 1893, RN torpedo production was transferred to the Royal Gun Factory. The British later established a Torpedo Experimental Establishment at HMS Vernon and a production facility at the Royal Naval Torpedo Factory, Greenock, in 1910. These are now closed.

The Nordenfelt-class Ottoman submarine Abdülhamid (1886) was the first submarine in history to fire a torpedo while submerged.

Whitehead opened a new factory adjacent to Portland Harbour, England, in 1890, which continued making torpedoes until the end of World War II. Because orders from the RN were not as large as expected, torpedoes were mostly exported. A series of devices was produced at Rijeka, with diameters from 14 in (36 cm) upward. The largest Whitehead torpedo was 18 in (46 cm) in diameter and 19 ft (5.8 m) long, made of polished steel or phosphor bronze, with a 200-pound (91 kg) gun-cotton warhead. It was propelled by a three-cylinder Brotherhood radial engine, using compressed air at around 1,300 psi (9.0 MPa) and driving two contra-rotating propellers, and was designed to self-regulate its course and depth as far as possible. By 1881, nearly 1,500 torpedoes had been produced. Whitehead also opened a factory at St Tropez in 1890 that exported torpedoes to Brazil, The Netherlands, Turkey, and Greece.

Whitehead purchased rights to the gyroscope of Ludwig Obry in 1888 but it was not sufficiently accurate, so in 1890 he purchased a better design to improve control of his designs, which came to be called the "Devil's Device". The firm of L. Schwartzkopff in Germany also produced torpedoes and exported them to Russia, Japan, and Spain. In 1885, Britain ordered a batch of 50 as torpedo production at home and Rijeka could not meet demand.

By World War I, Whitehead's torpedo remained a worldwide success, and his company was able to maintain a monopoly on torpedo production. By that point, his torpedo had grown to a diameter of 18 inches with a maximum speed of 30.5 knots (56.5 km/h; 35.1 mph) with a warhead weighing 170 pounds (77 kg).

Whitehead faced competition from the American Lieutenant Commander John A. Howell, whose design, driven by a flywheel, was simpler and cheaper. It was produced from 1885 to 1895, and it ran straight, leaving no wake. A Torpedo Test Station was set up in Rhode Island in 1870. The Howell torpedo was the only United States Navy model until Whitehead torpedoes produced by Bliss and Williams entered service in 1894. Five varieties were produced, all 18-inch diameter. The United States Navy started using the Whitehead torpedo in 1892 after an American company, E.W. Bliss, secured manufacturing rights.

The Royal Navy introduced the Brotherhood wet heater engine in 1907 with the 18 in. Mk. VII & VII* which greatly increased the speed and/or range over compressed air engines and wet heater type engines became the standard in many major navies up to and during the Second World War.

The first modern-day torpedo launching station in Rijeka, 2020

Torpedo boats and guidance systems

HMS Lightning, built-in 1877 as a small attack boat armed with torpedoes.

Ships of the line were superseded by ironclads, large steam-powered ships with heavy gun armament and heavy armor, in the mid 19th century. Ultimately this line of development led to the dreadnought category of all-big-gun battleships, starting with HMS Dreadnought.

Although these ships were incredibly powerful, the new weight of armor slowed them down, and the huge guns needed to penetrate that armor fired at very slow rates. This allowed for the possibility of a small and fast ship that could attack the battleships, at a much lower cost. The introduction of the torpedo provided a weapon that could cripple, or sink, any battleship.

The first boat designed to fire the self-propelled Whitehead torpedo was HMS Lightning, completed in 1877. The French Navy followed suit in 1878 with Torpilleur No 1, launched in 1878 though she had been ordered in 1875. The first torpedo boats were built at the shipyards of Sir John Thornycroft and gained recognition for their effectiveness.

At the same time, inventors were working on building a guided torpedo. Prototypes were built by John Ericsson, John Louis Lay, and Victor von Scheliha, but the first practical guided missile was patented by Louis Brennan, an emigre to Australia, in 1877.

The Brennan torpedo was the first practical guided torpedo.

It was designed to run at a consistent depth of 12 feet (3.7 m), and was fitted with an indicator mast that just broke the surface of the water. At night the mast had a small light, only visible from the rear. Two steel drums were mounted one behind the other inside the torpedo, each carrying several thousand yards of high-tensile steel wire. The drums connected via a differential gear to twin contra-rotating propellers. If one drum was rotated faster than the other, then the rudder was activated. The other ends of the wires were connected to steam-powered winding engines, which were arranged so that speeds could be varied within fine limits, giving sensitive steering control for the torpedo.

The torpedo attained a speed of 20 knots (37 km/h; 23 mph) using a wire 1.0 millimetre (0.04 in) in diameter but later this was changed to 1.8 mm (0.07 in) to increase the speed to 27 knots (50 km/h; 31 mph). The torpedo was fitted with elevators controlled by a depth-keeping mechanism, and the fore and aft rudders operated by the differential between the drums.

Brennan traveled to Britain, where the Admiralty examined the torpedo and found it unsuitable for shipboard use. However, the War Office proved more amenable, and in early August 1881, a special Royal Engineer committee was instructed to inspect the torpedo at Chatham and report back directly to the Secretary of State for War, Hugh Childers. The report strongly recommended that an improved model be built at government expense. In 1883 an agreement was reached between the Brennan Torpedo Company and the government. The newly appointed Inspector-General of Fortifications in England, Sir Andrew Clarke, appreciated the value of the torpedo and in spring 1883 an experimental station was established at Garrison Point Fort, Sheerness, on the River Medway, and a workshop for Brennan was set up at the Chatham Barracks, the home of the Royal Engineers. Between 1883 and 1885 the Royal Engineers held trials and in 1886 the torpedo was recommended for adoption as a harbor defense torpedo. It was used throughout the British Empire for more than fifteen years.

Use in conflict

Sinking of Chilean ironclad Blanco Encalada by a torpedo in the Battle of Caldera Bay, during the Chilean Civil War of 1891.

The Royal Navy frigate HMS Shah was the first naval vessel to fire a self-propelled torpedo in anger during the Battle of Pacocha against rebel Peruvian ironclad Huáscar on 29 May 1877. The Peruvian ship successfully outran the device. On 16 January 1878, the Turkish steamer Intibah became the first vessel to be sunk by self-propelled torpedoes, launched from torpedo boats operating from the tender Velikiy Knyaz Konstantin under the command of Stepan Osipovich Makarov during the Russo-Turkish War of 1877–78.

In another early use of the torpedo, during the War of the Pacific, the Peruvian ironclad Huáscar commanded by captain Miguel Grau attacked the Chilean corvette Abtao on 28 August 1879 at Antofagasta with a self-propelled Lay torpedo only to have it reverse course. The ship Huascar was saved when an officer jumped overboard to divert it.

The Chilean ironclad Blanco Encalada was sunk on 23 April 1891 by a self-propelled torpedo from the Almirante Lynch, during the Chilean Civil War of 1891, becoming the first ironclad warship sunk by this weapon. The Chinese turret ship Dingyuan was purportedly hit and disabled by a torpedo after numerous attacks by Japanese torpedo boats during the First Sino-Japanese War in 1894. At this time torpedo attacks were still very close range and very dangerous to the attackers.

Knyaz Suvorov was sunk by Japanese torpedo boats during the Russo-Japanese War.

Several western sources reported that the Qing dynasty Imperial Chinese military, under the direction of Li Hongzhang, acquired electric torpedoes, which they deployed in numerous waterways, along with fortresses and numerous other modern military weapons acquired by China. At the Tientsin Arsenal in 1876, the Chinese developed the capacity to manufacture these "electric torpedoes" on their own. Although a form of Chinese art, the Nianhua, depict such torpedoes being used against Russian ships during the Boxer Rebellion, whether they were actually used in battle against them is undocumented and unknown.

The Russo-Japanese War (1904–1905) was the first great war of the 20th century. During the war the Imperial Russian and Imperial Japanese navies launched nearly 300 torpedoes at each other, all of them of the "self-propelled automotive" type. The deployment of these new underwater weapons resulted in one battleship, two armored cruisers, and two destroyers being sunk in action, with the remainder of the roughly 80 warships being sunk by the more conventional methods of gunfire, mines, and scuttling.

On 27 May 1905, during the Battle of Tsushima, Admiral Rozhestvensky's flagship, the battleship Knyaz Suvorov, had been gunned to a wreck by Admiral Tōgō's 12-inch gunned battleline. With the Russians sunk and scattering, Tōgō prepared for pursuit, and while doing so ordered his torpedo boat destroyers (TBDs) (mostly referred to as just destroyers in most written accounts) to finish off the Russian battleship. Knyaz Suvorov was set upon by 17 torpedo-firing warships, ten of which were destroyers and four torpedo boats. Twenty-one torpedoes were launched at the pre-dreadnought, and three struck home, one fired from the destroyer Murasame and two from torpedo boats No. 72 and No. 75. The flagship slipped under the waves shortly thereafter, taking over 900 men with her to the bottom. On December 9, 1912, the Greek submarine "Dolphin" launched a torpedo against the Ottoman cruiser "Medjidieh".

Aerial torpedo

In 1915, Rear Admiral Bradley A. Fiske conceived of the aerial torpedo.

The end of the Russo-Japanese War fuelled new theories, and the idea of dropping lightweight torpedoes from aircraft was conceived in the early 1910s by Bradley A. Fiske, an officer in the United States Navy. Awarded a patent in 1912, Fiske worked out the mechanics of carrying and releasing the aerial torpedo from a bomber, and defined tactics that included a night-time approach so that the target ship would be less able to defend itself. Fiske determined that the notional torpedo bomber should descend rapidly in a sharp spiral to evade enemy guns, then when about 10 to 20 feet (3 to 6 m) above the water the aircraft would straighten its flight long enough to line up with the torpedo's intended path. The aircraft would release the torpedo at a distance of 1,500 to 2,000 yards (1,400 to 1,800 m) from the target. Fiske reported in 1915 that, using this method, enemy fleets could be attacked within their harbors if there was enough room for the torpedo track.

Meanwhile, the Royal Naval Air Service began actively experimenting with this possibility. The first successful aerial torpedo drop was performed by Gordon Bell in 1914 – dropping a Whitehead torpedo from a Short S.64 seaplane. The success of these experiments led to the construction of the first purpose-built operational torpedo aircraft, the Short Type 184, built-in 1915.

The Short Type 184 was the first torpedo aircraft when built-in 1915.

An order for ten aircraft was placed, and 936 aircraft were built by ten different British aircraft companies during the First World War. The two prototype aircraft were embarked upon HMS Ben-my-Chree, which sailed for the Aegean on 21 March 1915 to take part in the Gallipoli campaign. On 12 August 1915 one of these, piloted by Flight Commander Charles Edmonds, was the first aircraft in the world to attack an enemy ship with an air-launched torpedo.

On 17 August 1915 Flight Commander Edmonds torpedoed and sank an Ottoman transport ship a few miles north of the Dardanelles. His formation colleague, Flight Lieutenant G B Dacre, was forced to land on the water owing to engine trouble but, seeing an enemy tug close by, taxied up to it and released his torpedo, sinking the tug. Without the weight of the torpedo Dacre was able to take off and return to Ben-My-Chree.

World War I

Launching a torpedo in 1915 during World War I
Torpedo launch in 1916

Torpedoes were widely used in World War I, both against shipping and against submarines. Germany disrupted the supply lines to Britain largely by use of submarine torpedoes, though submarines also extensively used guns. Britain and its allies also used torpedoes throughout the war. U-boats themselves were often targeted, twenty being sunk by torpedo. Two Royal Italian Navy torpedo boats scored a success against an Austrian-Hungarian squadron, sinking the battleship SMS Szent István with two torpedoes.

The Royal Navy had been experimenting with ways to further increase the range of torpedoes during World War 1 using pure oxygen instead of compressed air, this work ultimately leading to the development of the oxygen-enriched air 24.5 in. Mk. I intended originally for the G3-class battlecruisers and N3 class battleships of 1921, both being cancelled due to the Washington Naval Treaty.

Initially, the Imperial Japanese Navy purchased Whitehead or Schwartzkopf torpedoes but by 1917, like the Royal Navy, they were conducting experiments with pure oxygen instead of compressed air. Because of explosions they abandoned the experiments but resumed them in 1926 and by 1933 had a working torpedo. They also used conventional wet-heater torpedoes.

World War II

In the inter-war years, financial stringency caused nearly all navies to skimp on testing their torpedoes. Only the British and Japanese had fully tested new technologies for torpedoes (in particular the Type 93, nicknamed Long Lance postwar by the US official historian Samuel E. Morison) at the start of World War II. Unreliable torpedoes caused many problems for the American submarine force in the early years of the war, primarily in the Pacific Theater. One possible exception to the pre-war neglect of torpedo development was the 45-cm caliber, 1931-premiered Japanese Type 91 torpedo, the sole aerial torpedo (Koku Gyorai) developed and brought into service by the Japanese Empire before the war. The Type 91 had an advanced PID controller and jettisonable, wooden Kyoban aerial stabilizing surfaces which released upon entering the water, making it a formidable anti-ship weapon; Nazi Germany considered manufacturing it as the Luftorpedo LT 850 after August 1942.

The Royal Navy's 24.5-inch oxygen-enriched air torpedo saw service in the two Nelson class battleships although by World War II the use of enriched oxygen had been discontinued due to safety concerns. In the final phase of the action against German battleship Bismarck, Rodney fired a pair of 24.5-inch torpedoes from her port-side tube and claimed one hit. According to Ludovic Kennedy, "if true, [this is] the only instance in history of one battleship torpedoing another". The Royal Navy continued the development of oxygen-enriched air torpedoes with the 21 in. Mk. VII of the 1920s designed for the County-class cruisers although once again these were converted to run on normal air at the start of World War II. Around this time too the Royal Navy were perfecting the Brotherhood burner cycle engine which offered a performance as good as the oxygen-enriched air engine but without the issues arising from the oxygen equipment and which was first used in the extremely successful and long-lived 21 in. Mk. VIII torpedo of 1925. This torpedo served throughout WW II (with 3,732 being fired by September 1944) and is still in limited service in the 21st Century. The improved Mark VIII** was used in two particularly notable incidents; on 6 February 1945 the only intentional wartime sinking of one submarine by another while both were submerged took place when HMS Venturer sank the German submarine U-864 with four Mark VIII** torpedoes and on 2 May 1982 when the Royal Navy submarine HMS Conqueror sank the Argentine cruiser ARA General Belgrano with two Mark VIII** torpedoes during the Falklands War. This is the only sinking of a surface ship by a nuclear-powered submarine in wartime and the second (of three) sinkings of a surface ship by any submarine since the end of World War II). The other two sinkings were of the Indian frigate INS Khukri and the South Korean corvette ROKS Cheonan.

A Japanese Type 93 torpedo – nicknamed "Long Lance" after the war

Many classes of surface ships, submarines, and aircraft were armed with torpedoes. Naval strategy at the time was to use torpedoes, launched from submarines or warships, against enemy warships in a fleet action on the high seas. There were concerns torpedoes would be ineffective against warships' heavy armor; an answer to this was to detonate torpedoes underneath a ship, badly damaging its keel and the other structural members in the hull, commonly called "breaking its back". This was demonstrated by magnetic influence mines in World War I. The torpedo would be set to run at a depth just beneath the ship, relying on a magnetic exploder to activate at the appropriate time.

Germany, Britain, and the U.S. independently devised ways to do this; German and American torpedoes, however, suffered problems with their depth-keeping mechanisms, coupled with faults in magnetic pistols shared by all designs. Inadequate testing had failed to reveal the effect of the Earth's magnetic field on ships and exploder mechanisms, which resulted in premature detonation. The Kriegsmarine and Royal Navy promptly identified and eliminated the problems. In the United States Navy (USN), there was an extended wrangle over the problems plaguing the Mark 14 torpedo (and its Mark 6 exploder). Cursory trials had allowed bad designs to enter service. Both the Navy Bureau of Ordnance and the United States Congress were too busy protecting their interests to correct the errors, and fully functioning torpedoes only became available to the USN twenty-one months into the Pacific War.

Loading 21-inch RNTF Mark VIII torpedoes into a Vickers Wellington medium bomber, May 1942. This type of torpedo was used to sink the Argentinian cruiser General Belgrano during the 1982 Falklands War

British submarines used torpedoes to interdict the Axis supply shipping to North Africa, while Fleet Air Arm Swordfish sank three Italian battleships at Taranto by a torpedo and (after a mistaken, but abortive, attack on Sheffield) scored one crucial hit in the hunt for the German battleship Bismarck. Large tonnages of merchant shipping were sunk by submarines with torpedoes in both the Battle of the Atlantic and the Pacific War.

Torpedo boats, such as MTBs, PT boats, or S-boats, enabled the relatively small but fast craft to carry enough firepower, in theory, to destroy a larger ship, though this rarely occurred in practice. The largest warship sunk by torpedoes from small craft in World War II was the British cruiser Manchester, sunk by Italian MAS boats on the night of 12/13 August 1942 during Operation Pedestal. Destroyers of all navies were also armed with torpedoes to attack larger ships. In the Battle off Samar, destroyer torpedoes from the escorts of the American task force "Taffy 3" showed effectiveness at defeating armor. Damage and confusion caused by torpedo attacks were instrumental in beating back a superior Japanese force of battleships and cruisers. In the Battle of the North Cape in December 1943, torpedo hits from British destroyers Savage and Saumarez slowed the German battleship Scharnhorst enough for the British battleship Duke of York to catch and sink her, and in May 1945 the British 26th Destroyer Flotilla (coincidentally led by Saumarez again) ambushed and sank Japanese heavy cruiser Haguro.

Frequency-hopping

During World War II, Hedy Lamarr and composer George Antheil developed a radio guidance system for Allied torpedoes, it intended to use frequency-hopping technology to defeat the threat of jamming by the Axis powers. As radio guidance had been abandoned some years earlier, it was not pursued. Although the US Navy never adopted the technology, it did, in the 1960s, investigate various spread-spectrum techniques. Spread-spectrum techniques are incorporated into Bluetooth technology and are similar to methods used in legacy versions of Wi-Fi. This work led to their induction into the National Inventors Hall of Fame in 2014.

Post–World War II

Because of improved submarine strength and speed, torpedoes had to be given improved warheads and better motors. During the Cold War torpedoes were an important asset with the advent of nuclear-powered submarines, which did not have to surface often, particularly those carrying strategic nuclear missiles.

Several navies have launched torpedo strikes since World War II, including:

Energy sources

USS Mustin launches a dummy torpedo during exercises.

Compressed air

The Whitehead torpedo of 1866, the first successful self-propelled torpedo, used compressed air as its energy source. The air was stored at pressures of up to 2.55 MPa (370 psi) and fed to a piston engine that turned a single propeller at about 100 rpm. It could travel about 180 metres (200 yd) at an average speed of 6.5 knots (12.0 km/h). The speed and range of later models were improved by increasing the pressure of the stored air. In 1906 Whitehead built torpedoes that could cover nearly 1,000 metres (1,100 yd) at an average speed of 35 knots (65 km/h).

At higher pressures the adiabatic cooling, experienced by the air as it expanded in the engine caused icing problems. This drawback was remedied by heating the air with seawater before it was fed to the engine, which increased engine performance further because the air expanded even more after heating. This was the principle used by the Brotherhood engine.

Heated torpedoes

Passing the air through an engine led to the idea of injecting a liquid fuel, like kerosene, into the air and igniting it. In this manner, the air is heated more and expands even further, and the burned propellant adds more gas to drive the engine. Construction of such heated torpedoes started circa 1904 by Whitehead's company.

Wet-heater

A further improvement was the use of water to cool the combustion chamber of the fuel-burning torpedo. This not only solved heating problems so more fuel could be burned but also allowed additional power to be generated by feeding the resulting steam into the engine together with the combustion products. Torpedoes with such a propulsion system became known as wet heaters, while heated torpedoes without steam generation were retrospectively called dry heaters. A simpler system was introduced by the British Royal Gun factory in 1908. Most torpedoes used in World War I and World War II were wet-heaters.

Compressed oxygen

The amount of fuel that can be burned by a torpedo engine (i.e. wet engine) is limited by the amount of oxygen it can carry. Since compressed air contains only about 21% oxygen, engineers in Japan developed the Type 93 (nicknamed "Long Lance" postwar) for destroyers and cruisers in the 1930s. It used pure compressed oxygen instead of compressed air and had performance unmatched by any contemporary torpedo in service, through the end of World War II. However, oxygen systems posed a danger to any ship that came under attack while still carrying such torpedoes; Japan lost several cruisers partly due to catastrophic secondary explosions of Type 93s. During the war, Germany experimented with hydrogen peroxide for the same purpose.

Oxygen enriched air

The British approached the problem of providing additional oxygen for the torpedo engine by the use of oxygen-enriched air, up to 57% instead of the 21% of normal atmospheric compressed air rather than pure oxygen. This significantly increased the range of the torpedo, the 24.5 inch Mk 1 having a range of 15,000 yards (14,000 m) at 35 knots (65 km/h) or 20,000 yards (18,000 m) at 30 knots (56 km/h) with a 750 pounds (340 kg) warhead. There was a general nervousness about the oxygen enrichment equipment, known for reasons of secrecy as 'No 1 Air Compressor Room' on board ships, and development shifted to the highly efficient Brotherhood Burner Cycle engine that used un-enriched air.

Burner cycle engine

After the First World War Brotherhood developed a 4 cylinder burner cycle engine which was roughly twice as powerful as the older wet heater engine. It was first used in the British Mk VIII torpedoes, which were still in service in 1982. It used a modified diesel cycle, using a small amount of paraffin to heat the incoming air, which was then compressed and further heated by the piston, and then more fuel was injected. It produced about 322 hp when introduced, but by the end of WW2 was at 465 hp, and there was a proposal to fuel it with nitric acid when it was projected to develop 750 hp.

Wire driven

U.S. World War II PT boat torpedo on display

The Brennan torpedo had two wires wound around internal drums. Shore-based steam winches pulled the wires, which spun the drums and drove the propellers. An operator controlled the relative speeds of the winches, providing guidance. Such systems were used for coastal defense of the British homeland and colonies from 1887 to 1903 and were purchased by, and under the control of, the Army as opposed to the Navy. Speed was about 25 knots (46 km/h) for over 2,400 m.

Flywheel

The Howell torpedo used by the US Navy in the late 19th century featured a heavy flywheel that had to be spun up before launch. It was able to travel about 400 yards (370 m) at 25 knots (46 km/h). The Howell had the advantage of not leaving a trail of bubbles behind it, unlike compressed air torpedoes. This gave the target vessel less chance to detect and evade the torpedo and avoided giving away the attacker's position. Additionally, it ran at a constant depth, unlike Whitehead models.

Electric batteries

Electric batteries of a French Z13 torpedo

Electric propulsion systems avoided tell-tale bubbles. John Ericsson invented an electrically propelled torpedo in 1873; it was powered by a cable from an external power source, because batteries of the time had insufficient capacity. The Sims-Edison torpedo was similarly powered. The Nordfelt torpedo was also electrically powered and was steered by impulses down a trailing wire.

Germany introduced its first battery-powered torpedo shortly before World War II, the G7e. It was slower and had a shorter range than the conventional G7a, but was wakeless and much cheaper. Its lead-acid rechargeable battery was sensitive to shock, required frequent maintenance before use, and required preheating for best performance. The experimental G7es, an enhancement of the G7e, used primary cells.

The United States had an electric design, the Mark 18, largely copied from the German torpedo (although with improved batteries), as well as FIDO, an air-dropped acoustic homing torpedo for anti-submarine use.

Modern electric torpedoes such as the Mark 24 Tigerfish, the Black Shark or DM2 series commonly use silver oxide batteries that need no maintenance, so torpedoes can be stored for years without losing performance.

Rockets

Several experimental rocket-propelled torpedoes were tried soon after Whitehead's invention but were not successful. Rocket propulsion has been implemented successfully by the Soviet Union, for example in the VA-111 Shkval—and has been recently revived in Russian and German torpedoes, as it is especially suitable for supercavitating devices.

Modern energy sources

Modern torpedoes use a variety of propellants, including electric batteries (as with the French F21 torpedo or Italian Black Shark), monopropellants (e.g., Otto fuel II as with the US Mark 48 torpedo), and bipropellants (e.g., hydrogen peroxide plus kerosene as with the Swedish Torped 62, sulfur hexafluoride plus lithium as with the US Mark 50 torpedo, or Otto fuel II plus hydroxyl ammonium perchlorate as with the British Spearfish torpedo).

Propulsion

The first of Whitehead's torpedoes had a single propeller and needed a large vane to stop it spinning about its longitudinal axis. Not long afterward the idea of contra-rotating propellers was introduced, to avoid the need for the vane. The three-bladed propeller came in 1893 and the four-bladed one in 1897. To minimize noise, today's torpedoes often use pump-jets.

Some torpedoes—like the Russian VA-111 Shkval, Iranian Hoot, and German Unterwasserlaufkörper/ Barracuda—use supercavitation to increase speed to over 200 knots (370 km/h). Torpedoes that don't use supercavitation, such as the American Mark 48 and British Spearfish, are limited to under 100 kn (120 mph; 190 km/h), though manufacturers and the military don't always release exact figures.

Guidance

A torpedo dropped from a Sopwith Cuckoo during World War I
Illustration of General Torpedo Fire Control Problem

Torpedoes may be aimed at the target and fired unguided, similarly to a traditional artillery shell, or they may be guided onto the target. They may be guided automatically towards the target by some procedure, e.g., sound (homing), or by the operator, typically via commands sent over a signal-carrying cable (wire guidance).

Unguided

The Victorian era Brennan torpedo could be steered onto its target by varying the relative speeds of its propulsion cables. However, the Brennan required a substantial infrastructure and was not suitable for shipboard use. Therefore, for the first part of its history, the torpedo was guided only in the sense that its course could be regulated to achieve an intended impact depth (because of the sine wave running path of the Whitehead, this was a hit or miss proposition, even when everything worked correctly) and, through gyroscopes, a straight course. With such torpedoes the method of attack in small torpedo boats, torpedo bombers and small submarines was to steer a predictable collision course abeam to the target and release the torpedo at the last minute, then veer away, all the time subject to defensive fire.

In larger ships and submarines, fire control calculators gave a wider engagement envelope. Originally, plotting tables (in large ships), combined with specialized slide rules (known in U.S. service as the "banjo" and "Is/Was"), reconciled the speed, distance, and course of a target with the firing ship's speed and course, together with the performance of its torpedoes, to provide a firing solution. By the Second World War, all sides had developed automatic electro-mechanical calculators, exemplified by the U.S. Navy's Torpedo Data Computer. Submarine commanders were still expected to be able to calculate a firing solution by hand as a backup against mechanical failure, and because many submarines existed at the start of the war were not equipped with a TDC; most could keep the "picture" in their heads and do much of the calculations (simple trigonometry) mentally, from extensive training.

Against high-value targets and multiple targets, submarines would launch a spread of torpedoes, to increase the probability of success. Similarly, squadrons of torpedo boats and torpedo bombers would attack together, creating a "fan" of torpedoes across the target's course. Faced with such an attack, the prudent thing for a target to do was to turn to parallel the course of the incoming torpedo and steam away from the torpedoes and the firer, allowing the relatively short-range torpedoes to use up their fuel. An alternative was to "comb the tracks", turning to parallel the incoming torpedo's course, but turning towards the torpedoes. The intention of such a tactic was still to minimize the size of the target offered to the torpedoes, but at the same time be able to aggressively engage the firer. This was the tactic advocated by critics of Jellicoe's actions at Jutland, his caution at turning away from the torpedoes being seen as the reason the Germans escaped.

The use of multiple torpedoes to engage single targets depletes torpedo supplies and greatly reduces a submarine's combat endurance. Endurance can be improved by ensuring a target can be effectively engaged by a single torpedo, which gave rise to the guided torpedo.

Pattern running

In World War II the Germans introduced programmable pattern-running torpedoes, which would run a predetermined pattern until they either ran out of fuel or hit something. The earlier version, FaT, ran out after launch in a straight line, and then weaved backward and forwards parallel to that initial course, whilst the more advanced LuT could transit to a different angle after launch, and then enter a more complex weaving pattern.

Radio and wire guidance

Though Luppis' original design had been rope-guided, torpedoes were not wire-guided until the 1960s.

During the First World War the U.S. Navy evaluated a radio controlled torpedo launched from a surface ship called the Hammond Torpedo. A later version tested in the 1930s was claimed to have an effective range of 6 miles (9.7 km).

Modern torpedoes use an umbilical wire, which nowadays allows the computer processing power of the submarine or ship to be used. Torpedoes such as the U.S. Mark 48 can operate in a variety of modes, increasing tactical flexibility.

Homing

Homing "fire and forget" torpedoes can use passive or active guidance or a combination of both. Passive acoustic torpedoes home in on emissions from a target. Active acoustic torpedoes home in on the reflection of a signal, or "ping", from the torpedo or its parent vehicle; this has the disadvantage of giving away the presence of the torpedo. In semi-active mode, a torpedo can be fired to the last known position or calculated position of a target, which is then acoustically illuminated ("pinged") once the torpedo is within attack range.

Later in the Second World War torpedoes were given acoustic (homing) guidance systems, with the American Mark 24 mine and Mark 27 torpedo and the German G7es torpedo. Pattern-following and wake homing torpedoes were also developed. Acoustic homing formed the basis for torpedo guidance after the Second World War.

The homing systems for torpedoes are generally acoustic, though there have been other target sensor types used. A ship's acoustic signature is not the only emission a torpedo can home in on; to engage U.S. supercarriers, the Soviet Union developed the 53–65 wake-homing torpedo. As standard acoustic lures can't distract a wake homing torpedo, the US Navy has installed the Surface Ship Torpedo Defense on aircraft carriers that use a Countermeasure Anti-Torpedo to home in on and destroy the attacking torpedo.

Warhead and fuzing

The warhead is generally some form of aluminized explosive, because the sustained explosive pulse produced by the powdered aluminum is particularly destructive against underwater targets. Torpex was popular until the 1950s, but has been superseded by PBX compositions. Nuclear torpedoes have also been developed, e.g. the Mark 45 torpedo. In lightweight antisubmarine torpedoes designed to penetrate submarine hulls, a shaped charge can be used. Detonation can be triggered by direct contact with the target or by a proximity fuze incorporating sonar and/or magnetic sensors.

Contact detonation

When a torpedo with a contact fuze strikes the side of the target hull, the resulting explosion creates a bubble of expanding gas, the walls of which move faster than the speed of sound in water, thus creating a shock wave. The side of the bubble which is against the hull rips away the external plating creating a large breach. The bubble then collapses in on itself, forcing a high-speed stream of water into the breach which can destroy bulkheads and machinery in its path.

Proximity detonation

A torpedo fitted with a proximity fuze can be detonated directly under the keel of a target ship. The explosion creates a gas bubble which may damage the keel or underside plating of the target. However, the most destructive part of the explosion is the upthrust of the gas bubble, which will bodily lift the hull in the water. The structure of the hull is designed to resist downward rather than upward pressure, causing severe strain in this phase of the explosion. When the gas bubble collapses, the hull will tend to fall into the void in the water, creating a sagging effect. Finally, the weakened hull will be hit by the uprush of water caused by the collapsing gas bubble, causing structural failure. On vessels up to the size of a modern frigate, this can result in the ship breaking in two and sinking. This effect is likely to prove less catastrophic on a much larger hull, for instance, that of an aircraft carrier.

Damage

The damage that may be caused by a torpedo depends on the "shock factor value", a combination of the initial strength of the explosion and the distance between the target and the detonation. When taken about ship hull plating, the term "hull shock factor" (HSF) is used, while keel damage is termed "keel shock factor" (KSF). If the explosion is directly underneath the keel, then HSF is equal to KSF, but explosions that are not directly underneath the ship will have a lower value of KSF.

Direct damage

Usually only created by contact detonation, direct damage is a hole blown in the ship. Among the crew, fragmentation wounds are the most common form of injury. Flooding typically occurs in one or two main watertight compartments, which can sink smaller ships or disable larger ones.

Bubble jet effect

The bubble jet effect occurs when a mine or torpedo detonates in the water a short distance away from the targeted ship. The explosion creates a bubble in the water, and due to the pressure difference, the bubble will collapse from the bottom. The bubble is buoyant, and so it rises towards the surface. If the bubble reaches the surface as it collapses, it can create a pillar of water that can go over a hundred meters into the air (a "columnar plume"). If conditions are right and the bubble collapses onto the ship's hull, the damage to the ship can be extremely serious; the collapsing bubble forms a high-energy jet that can break a meter-wide hole straight through the ship, flooding one or more compartments, and is capable of breaking smaller ships apart. The crew in the areas hit by the pillar are usually killed instantly. Other damage is usually limited.

The Baengnyeong incident, in which ROKS Cheonan broke in half and sank off the coast South Korea in 2010, was caused by the bubble jet effect, according to an international investigation.

Shock effect

If the torpedo detonates at a distance from the ship, and especially under the keel, the change in water pressure causes the ship to resonate. This is frequently the most deadly type of explosion if it is strong enough. The whole ship is dangerously shaken and everything on board is tossed around. Engines rip from their beds, cables from their holders, etc. A badly shaken ship usually sinks quickly, with hundreds, or even thousands of small leaks all over the ship and no way to power the pumps. The crew fares no better, as the violent shaking tosses them around. This shaking is powerful enough to cause disabling injury to knees and other joints in the body, particularly if the affected person stands on surfaces connected directly to the hull (such as steel decks).

The resulting gas cavitation and shock-front-differential over the width of the human body is sufficient to stun or kill divers.

Control surfaces and hydrodynamics

Control surfaces are essential for a torpedo to maintain its course and depth. A homing torpedo also needs to be able to outmaneuver a target. Good hydrodynamics are needed for it to attain high speed efficiently and also to give a long range since the torpedo has limited stored energy.

Launch platforms and launchers

A Mark 32 Mod 15 Surface Vessel Torpedo Tube (SVTT) fires a Mark 46 Mod 5 lightweight torpedo

Torpedoes may be launched from submarines, surface ships, helicopters and fixed-wing aircraft, unmanned naval mines and naval fortresses. They are also used in conjunction with other weapons; for example, the Mark 46 torpedo used by the United States is the warhead section of the ASROC (Anti-Submarine ROCket) and the CAPTOR mine (CAPsulated TORpedo) is a submerged sensor platform which releases a torpedo when a hostile contact is detected.

Ships

Amidships quintuple mounting for 21 in (53 cm) torpedoes aboard the World War II era destroyer USS Charrette

Originally, Whitehead torpedoes were intended for launch underwater and the firm was upset when they found out the British were launching them above water, as they considered their torpedoes too delicate for this. However, the torpedoes survived. The launch tubes could be fitted in a ship's bow, which weakened it for ramming, or on the broadside; this introduced problems because of water flow twisting the torpedo, so guide rails and sleeves were used to prevent it. The torpedoes were originally ejected from the tubes by compressed air but later slow-burning gunpowder was used. Torpedo boats originally used a frame that dropped the torpedo into the sea. Royal Navy Coastal Motor Boats of World War I used a rear-facing trough and a cordite ram to push the torpedoes into the water tail-first; they then had to move rapidly out of the way to avoid being hit by their torpedo.

Developed in the run-up to the First World War, multiple-tube mounts (initially twin, later triple and in WW2 up to quintuple in some ships) for 21 to 24 in (53 to 61 cm) torpedoes in rotating turntable mounts appeared. Destroyers could be found with two or three of these mounts with between five and twelve tubes in total. The Japanese went one better, covering their tube mounts with splinter protection and adding reloading gear (both unlike any other navy in the world), making them true turrets and increasing the broadside without adding tubes and top hamper (as the quadruple and quintuple mounts did). Considering that their Type 93s were very effective weapons, the IJN equipped their cruisers with torpedoes. The Germans also equipped their capital ships with torpedoes.

Smaller vessels such as PT boats carried their torpedoes in fixed deck-mounted tubes using compressed air. These were either aligned to fire forward or at an offset angle from the centerline.

Later, lightweight mounts for 12.75 in (32.4 cm) homing torpedoes were developed for anti-submarine use consisting of triple launch tubes used on the decks of ships. These were the 1960 Mk 32 torpedo launcher in the US and part of STWS (Shipborne Torpedo Weapon System) in the UK. Later a below-decks launcher was used by the RN. This basic launch system continues to be used today with improved torpedoes and fire control systems.

Submarines

Modern submarines use either swim-out systems or a pulse of water to discharge the torpedo from the tube, both of which have the advantage of being significantly quieter than previous systems, helping avoid detection of the firing from passive sonar. Earlier designs used a pulse of compressed air or a hydraulic ram.

Early submarines, when they carried torpedoes, were fitted with a variety of torpedo launching mechanisms in a range of locations; on the deck, in the bow or stern, amidships, with some launch mechanisms permitting the torpedo to be aimed over a wide arc. By World War II, designs favored multiple bow tubes and fewer or no stern tubes. Modern submarine bows are usually occupied by a large sonar array, necessitating midships tubes angled outward, while stern tubes have largely disappeared. The first French and Russian submarines carried their torpedoes externally in Drzewiecki drop collars. These were cheaper than tubes but less reliable. Both the United Kingdom and the United States experimented with external tubes in World War II. External tubes offered a cheap and easy way of increasing torpedo capacity without radical redesign, something neither had time or resources to do before nor early in, the war. British T-class submarines carried up to 13 torpedo tubes, up to 5 of them external. America's use was mainly limited to earlier Porpoise-, Salmon-, and Sargo-class boats. Until the appearance of the Tambor class, most American submarines only carried 4 bow and either 2 or 4 stern tubes, something many American submarine officers felt provided inadequate firepower.[citation needed] This problem was compounded by the notorious unreliability of the Mark 14 torpedo.

Late in World War II, the U.S. adopted a 16 in (41 cm) homing torpedo (known as "Cutie") for use against escorts. It was basically a modified Mark 24 Mine with wooden rails to allow firing from a 21 in (53 cm) torpedo tube.

Air launch

Aerial torpedoes may be carried by fixed-wing aircraft, helicopters, or missiles. They are launched from the first two at prescribed speeds and altitudes, dropped from bomb-bays or underwing hardpoints.

Handling equipment

Although lightweight torpedoes are fairly easily handled, the transport and handling of heavyweight torpedoes is difficult, especially in the tight spaces in a submarine. After the Second World War, some Type XXI submarines were obtained from Germany by the United States and Britain. One of the main novel developments seen was a mechanical handling system for torpedoes. Such systems were widely adopted as a result of this discovery.

Classes and diameters

Torpedo tube aboard the French submarine Argonaute

Torpedoes are launched in several ways:

Many navies have two weights of torpedoes:

  • A light torpedo used primarily as a close attack weapon, particularly by aircraft.
  • A heavy torpedo used primarily as a standoff weapon, particularly by submerged submarines.

In the case of deck or tube launched torpedoes, the diameter of the torpedo is a key factor in determining the suitability of a particular torpedo to a tube or launcher, similar to the caliber of the gun. The size is not quite as critical as for a gun, but the diameter has become the most common way of classifying torpedoes.

Length, weight, and other factors also contribute to compatibility. In the case of aircraft launched torpedoes, the key factors are weight, provision of suitable attachment points, and launch speed. Assisted torpedoes are the most recent development in torpedo design, and are normally engineered as an integrated package. Versions for aircraft and assisted launching have sometimes been based on deck or tube launched versions, and there has been at least one case of a submarine torpedo tube being designed to fire an aircraft torpedo.

As in all munition design, there is a compromise between standardization, which simplifies manufacture, and logistics, and specialization, which may make the weapon significantly more effective. Small improvements in either logistics or effectiveness can translate into enormous operational advantages.

Depth charge

From Wikipedia, the free encyclopedia
US World War II Mark IX depth charge. Streamlined and equipped with fins to impart rotation, allowing it to fall in a straight trajectory with less chance of drifting off target. This depth charge contained 200 lb (91 kg) of Torpex.

A depth charge is an anti-submarine warfare (ASW) weapon. It is intended to destroy a submarine by being dropped into the water nearby and detonating, subjecting the target to a powerful and destructive hydraulic shock. Most depth charges use high explosive charges and a fuze set to detonate the charge, typically at a specific depth. Depth charges can be dropped by ships, patrol aircraft, and helicopters.

Depth charges were developed during World War I, and were one of the first viable methods of attacking a submarine underwater. They were widely used in World War I and World War II, and remained part of the anti-submarine arsenals of many navies during the Cold War, during which they were supplemented, and later largely replaced, by anti-submarine homing torpedoes.

The Mk 101 Lulu was a US nuclear depth bomb operational from 1958-1972

A depth charge fitted with a nuclear warhead is also known as a "nuclear depth bomb". These were designed to be dropped from a patrol plane or deployed by an anti-submarine missile from a surface ship, or another submarine, located a safe distance away. By the late 1990s all nuclear anti-submarine weapons had been withdrawn from service by the United States, the United Kingdom, France, Russia and China. They have been replaced by conventional weapons whose accuracy and range had improved greatly as ASW technology improved.

History

Depth charges on USS Cassin Young (DD-793)

The first attempt to fire charges against submerged targets was with aircraft bombs attached to lanyards which triggered them. A similar idea was a 16 lb (7.3 kg) guncotton charge in a lanyarded can. Two of these lashed together became known as the "depth charge Type A". Problems with the lanyards tangling and failing to function led to the development of a chemical pellet trigger as the "Type B". These were effective at a distance of around 20 ft (6.1 m).

A 1913 Royal Navy Torpedo School report described a device intended for countermining, a "dropping mine". At Admiral John Jellicoe's request, the standard Mark II mine was fitted with a hydrostatic pistol (developed in 1914 by Thomas Firth and Sons of Sheffield) preset for 45 ft (14 m) firing, to be launched from a stern platform. Weighing 1,150 lb (520 kg), and effective at 100 ft (30 m), the "cruiser mine" was a potential hazard to the dropping ship. The design work was carried out by Herbert Taylor at the RN Torpedo and Mine School, HMS Vernon. The first effective depth charge, the Type D, became available in January 1916. It was a barrel-like casing containing a high explosive (usually TNT, but amatol was also used when TNT became scarce). There were initially two sizes—Type D, with a 300 lb (140 kg) charge for fast ships, and Type D* with a 120 lb (54 kg) charge for ships too slow to leave the danger area before the more powerful charge detonated.

A hydrostatic pistol actuated by water pressure at a pre-selected depth detonated the charge. Initial depth settings were 40 or 80 ft (12 or 24 m). Because production could not keep up with demand, anti-submarine vessels initially carried only two depth charges, to be released from a chute at the stern of the ship. The first success was the sinking of U-68 off Kerry, Ireland, on 22 March 1916, by the Q-ship Farnborough. Germany became aware of the depth charge following unsuccessful attacks on U-67 on 15 April 1916, and U-69 on 20 April 1916. The only other submarines sunk by depth charge during 1916 were UC-19 and UB-29.

Numbers of depth charges carried per ship increased to four in June 1917, to six in August, and 30-50 by 1918. The weight of charges and racks caused ship instability unless heavy guns and torpedo tubes were removed to compensate. Improved pistols allowed greater depth settings in 50 ft (15 m) increments, from 50 to 200 ft (15 to 61 m). Even slower ships could safely use the Type D at below 100 ft (30 m) and at 10 kn (19 km/h; 12 mph) or more, so the relatively ineffective Type D* was withdrawn. Monthly use of depth charges increased from 100 to 300 per month during 1917 to an average of 1745 per month during the last six months of World War I. The Type D could be detonated as deep as 300 ft (91 m) by that date. By the war's end, 74,441 depth charges had been issued by the RN, and 16,451 fired, scoring 38 kills in all, and aiding in 140 more.

Depth charge exploding after being released by HMS Ceylon

The United States requested full working drawings of the device in March 1917. Having received them, Commander Fullinwider of the U.S. Bureau of Naval Ordnance and U.S. Navy engineer Minkler made some modifications and then patented it in the U.S. It has been argued that this was done to avoid paying the original inventor.

The Royal Navy Type D depth charge was designated the "Mark VII" in 1939. Initial sinking speed was 7 ft/s (2.1 m/s) with a terminal velocity of 9.9 ft/s (3.0 m/s) at a depth of 250 ft (76 m) if rolled off the stern, or upon water contact from a depth charge thrower. Cast iron weights of 150 lb (68 kg) were attached to the Mark VII at the end of 1940 to increase sinking velocity to 16.8 ft/s (5.1 m/s). New hydrostatic pistols increased the maximum detonation depth to 900 ft (270 m). The Mark VII's 290 lb (130 kg) amatol charge was estimated to be capable of splitting a 78 in (22 mm) submarine pressure hull at a distance of 20 ft (6.1 m), and forcing the submarine to surface at twice that. The change of explosive to Torpex (or Minol) at the end of 1942 was estimated to increase those distances to 26 and 52 ft (7.9 and 15.8 m).

The British Mark X depth charge weighed 3,000 lb (1,400 kg) and was launched from the 21 in (530 mm) torpedo tubes of older destroyers to achieve a sinking velocity of 21 ft/s (6.4 m/s). The launching ship needed to clear the area at 11 knots to avoid damage, and the charge was seldom used. Only 32 were actually fired, and they were known to be troublesome.

The teardrop-shaped United States Mark 9 depth charge entered service in the spring of 1943. The charge was 200 lb (91 kg) of Torpex with a sinking speed of 14.4 ft/s (4.4 m/s) and depth settings of up to 600 ft (180 m). Later versions increased depth to 1,000 ft (300 m) and sinking speed to 22.7 ft/s (6.9 m/s) with increased weight and improved streamlining.

Although the explosions of the standard United States 600 lb (270 kg) Mark 4 and Mark 7 depth charge used in World War II were nerve-wracking to the target, a U-boat's pressure hull would not rupture unless the charge detonated within about 15 ft (4.6 m). Getting the weapon within this range was a matter of luck and quite unlikely as the target took evasive action. Most U-boats sunk by depth charges were destroyed by damage accumulated from an extended barrage rather than by a single charge, and many survived hundreds of depth charges over a period of many hours, such as U-427, which survived 678 depth charges in April 1945.

Delivery mechanisms

Loading a drum-type Mark VII depth charge onto a Flower-class corvette's K-gun
Y-gun depth charge thrower

The first delivery mechanism was to simply roll the "ashcans" off racks at the stern of the moving attacking vessel. Originally depth charges were simply placed at the top of a ramp and allowed to roll. Improved racks, which could hold several depth charges and release them remotely with a trigger, were developed towards the end of the First World War. These racks remained in use throughout World War II because they were simple and easy to reload.

Some Royal Navy trawlers used for anti-submarine work during 1917 and 1918 had a thrower on the forecastle for a single depth charge, but there do not seem to be any records of it being used in action. Specialized depth charge throwers were developed to generate a wider dispersal pattern when used in conjunction with rack-deployed charges. The first of these was developed from a British Army trench mortar. 1277 were issued, 174 installed in auxiliaries during 1917 and 1918. The bombs they launched were too light to be truly effective; only one U-boat is known to have been sunk by them.

Thornycroft created an improved version able to throw a charge 40 yd (37 m). The first was fitted in July 1917 and became operational in August. In all, 351 torpedo boat destroyers and 100 other craft were equipped. Projectors called "Y-guns" (in reference to their basic shape), developed by the U.S. Navy's Bureau of Ordnance from the Thornycroft thrower, became available in 1918. Mounted on the centerline of the ship with the arms of the Y pointing outboard, two depth charges were cradled on shuttles inserted into each arm. An explosive propellant charge was detonated in the vertical column of the Y-gun to propel a depth charge about 45 yd (41 m) over each side of the ship. The main disadvantage of the Y-gun was that it had to be mounted on the centerline of a ship's deck, which could otherwise be occupied by superstructure, masts, or guns. The first were built by New London Ship and Engine Company beginning on 24 November 1917.

The K-gun, standardized in 1942, replaced the Y-gun as the primary depth charge projector. The K-guns fired one depth charge at a time and could be mounted on the periphery of a ship's deck, thus freeing valuable centerline space. Four to eight K-guns were typically mounted per ship. The K-guns were often used together with stern racks to create patterns of six to ten charges. In all cases, the attacking ship needed to be moving fast enough to get out of the danger zone before the charges exploded.

Depth bombs hung under the wings of an RAF Short Sunderland flying boat

Depth charges could also be dropped from an aircraft against submarines. At the start of World War II, Britain's primary aerial anti-submarine weapon was the 100 lb (45 kg) anti-submarine bomb, but it was too light to be effective. To replace it, the Royal Navy's 450 lb (200 kg) Mark VII depth charge was modified for aerial use by the addition of a streamlined nose fairing and stabilising fins on the tail; it entered service in 1941 as the Mark VII Airborne DC. Other designs followed in 1942.

Experiencing the same problems as the RAF with ineffective anti-submarine bombs, Captain Birger Ek of Finnish Air Force squadron LeLv 6 contacted a navy friend to use Finnish Navy depth charges from aircraft, which led to his unit's Tupolev SB bombers being modified in early 1942 to carry depth charges.

Later depth charges for dedicated aerial use were developed. These are still useful today and remain in use, particularly for shallow-water situations where a homing torpedo may not be effective. Depth charges are especially useful for "flushing the prey" in the event of a diesel submarine hiding on the bottom.

Effectiveness

To be effective depth charges had to explode at the correct depth. To ensure this, a pattern of charges set to different depths would be laid atop the submarine's suspected position.

The effective use of depth charges required the combined resources and skills of many individuals during an attack. Sonar, helm, depth charge crews and the movement of other ships had to be carefully coordinated. Aircraft depth charge tactics depended on the aircraft using its speed to rapidly appear from over the horizon and surprising the submarine on the surface (where it spent most of its time) during the day or night (at night using radar to detect the target and a Leigh light to illuminate it immediately before attacking), then quickly attacking once it had been located, as the submarine would normally crash dive to escape attack.

As the Battle of the Atlantic wore on, British and Commonwealth forces became particularly adept at depth charge tactics, and formed some of the first destroyer hunter-killer groups to actively seek out and destroy German U-boats.

Surface ships usually used ASDIC (sonar) to detect submerged submarines. However, to deliver its depth charges a ship had to pass over the contact to drop them over the stern; sonar contact would be lost just before attack, rendering the hunter blind at the crucial moment. This gave a skilful submarine commander an opportunity to take evasive action. In 1942 the forward-throwing "hedgehog" mortar, which fired a spread salvo of bombs with contact fuzes at a "stand-off" distance while still in sonar contact, was introduced, and proved to be effective.

Pacific theater and the May Incident

In the Pacific Theater during World War II, Japanese depth charge attacks were initially unsuccessful. Unless caught in shallow water, a submarine could dive below the Japanese depth charge attack. The Japanese were unaware that the submarines could dive so deep. The old United States S-class submarines (1918–1925) had a test depth of 200 ft (61 m) but the more modern Balao-class submarines (1943) could reach 400 ft (120 m).

In June 1943, the deficiencies of Japanese depth-charge tactics were revealed in a press conference held by U.S. Congressman Andrew J. May of the House Military Affairs Committee, who had visited the Pacific theater and received intelligence and operational briefings.

Various press associations reported the depth issue. Soon, the Japanese were setting their depth charges to explode at a more effective average depth of 246 ft (75 m). Vice Admiral Charles A. Lockwood, commander of the U.S. submarine fleet in the Pacific, later estimated that May's revelation cost the United States Navy as many as ten submarines and 800 seamen killed in action. The leak became known as The May Incident.

Later developments

For the reasons expressed above, the depth charge was generally replaced as an anti-submarine weapon. Initially, this was by ahead-throwing weapons such as the British-developed Hedgehog and later Squid mortars. These weapons threw a pattern of warheads ahead of the attacking vessel to bracket a submerged contact. The Hedgehog was contact fuzed, while the Squid fired a pattern of three large (200 kg) depth charges with clockwork detonators. Later developments included the Mark 24 "Fido" acoustic homing torpedo (and later such weapons), and the SUBROC, which was armed with a nuclear depth charge. The USSR, United States and United Kingdom developed nuclear depth bombs. As of 2018, the Royal Navy retains a depth charge labelled as Mk11 Mod 3, which can be deployed from its AgustaWestland Wildcat and Merlin HM.2 helicopters.

Signaling

During the Cold War when it was necessary to inform submarines of the other side that they had been detected but without actually launching an attack, low-power "signalling depth charges" (also called "practice depth charges") were sometimes used, powerful enough to be detected when no other means of communication was possible, but not destructive.

Underwater explosions

USS Agerholm (DD-826) launches an ASROC anti-submarine rocket, armed with a nuclear depth bomb, during Dominic Swordfish (1962)

The high explosive in a depth charge undergoes a rapid chemical reaction at an approximate rate of 8,000 m/s (26,000 ft/s). The gaseous products of that reaction momentarily occupy the volume previously occupied by the solid explosive, but at very high pressure. This pressure is the source of the damage and is proportional to the explosive density and the square of the detonation velocity. A depth charge gas bubble expands to equalize with the pressure of the surrounding water.

This gas expansion propagates a shock wave. The density difference of the expanding gas bubble from the surrounding water causes the bubble to rise toward the surface. Unless the explosion is shallow enough to vent the gas bubble to the atmosphere during its initial expansion, the momentum of water moving away from the gas bubble will create a gaseous void of lower pressure than the surrounding water. Surrounding water pressure then collapses the gas bubble with inward momentum causing excess pressure within the gas bubble. Re-expansion of the gas bubble then propagates another potentially damaging shock wave. Cyclical expansion and contraction can continue for several seconds until the gas bubble vents to the atmosphere.

Consequently, explosions where the depth charge is detonated at a shallow depth and the gas bubble vents into the atmosphere very soon after the detonation are quite ineffective, even though they are more dramatic and therefore preferred in movies. A sign of an effective detonation depth is that the surface just slightly rises and only after a while vents into a water burst.

Very large depth charges, including nuclear weapons, may be detonated at sufficient depth to create multiple damaging shock waves. Such depth charges can also cause damage at longer distances, if reflected shock waves from the ocean floor or surface converge to amplify radial shock waves. Submarines or surface ships may be damaged if operating in the convergence zones of their own depth charge detonations.

The damage that an underwater explosion inflicts on a submarine comes from a primary and a secondary shock wave. The primary shock wave is the initial shock wave of the depth charge, and will cause damage to personnel and equipment inside the submarine if detonated close enough. The secondary shock wave is a result of the cyclical expansion and contraction of the gas bubble and will bend the submarine back and forth and cause catastrophic hull breach, in a way that can be likened to bending a plastic ruler rapidly back and forth until it snaps. Up to sixteen cycles of secondary shock waves have been recorded in tests. The effect of the secondary shock wave can be reinforced if another depth charge detonates on the other side of the hull in close time proximity to the first detonation, which is why depth charges are normally launched in pairs with different pre-set detonation depths.

The killing radius of a depth charge depends on the depth of detonation, the payload of the depth charge and the size and strength of the submarine hull. A depth charge of approximately 220 lb (100 kg) of TNT (400 MJ) would normally have a killing radius (resulting in a hull breach) of only 9.8–13.1 ft (3–4 m) against a conventional 1000-ton submarine, while the disablement radius (where the submarine is not sunk but is put out of commission) would be approximately 26–33 ft (8–10 m). A larger payload increases the radius only slightly because the effect of an underwater explosion decreases as the cube of the distance to the target.

SM-64 Navaho

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/SM-64_Navaho
Navaho missile on launch pad

The North American SM-64 Navaho was a supersonic intercontinental cruise missile project built by North American Aviation (NAA). The final design was capable of delivering a nuclear weapon to the USSR from bases within the US, while cruising at Mach 3 (3,700 km/h; 2,300 mph) at 60,000 feet (18,000 m) altitude. The missile is named after the Navajo Nation.

The original 1946 project called for a relatively short-range system, a boost-glide weapon based on a winged V-2 rocket design. Over time the requirements were repeatedly extended, both due to the US Air Force's desire for longer ranged systems, as well as competition from similar weapons that successfully filled the shorter-range niche. This led to a new design based on a ramjet powered cruise missile, which also developed into a series of ever-larger versions, along with the booster rockets to launch them up to speed.

Through this period the US Air Force was developing the SM-65 Atlas, based on rocket technology developed for Navaho. Atlas filled the same performance goals but could do so with total flight times measured in minutes rather than hours, and flying at speeds and altitudes which made them immune to interception, as opposed to merely very difficult to intercept as in the case of Navaho. With the launch of Sputnik 1 in 1957 and the ensuing fears of a missile gap, Atlas received the highest development authority. Navaho continued as a backup, before being canceled in 1958 when Atlas successfully matured.

Although Navaho did not enter service, its development provided useful research in a number of fields. A version of the Navaho airframe powered by a single turbojet became the AGM-28 Hound Dog, which was carried towards its targets on the Boeing B-52 Stratofortress and then flew the rest of the way at about Mach 2. The guidance system was used to guide the first Polaris submarines. The booster engine design, spun off to NAA's new Rocketdyne subsidiary, was used in various versions of the Atlas, PGM-11 Redstone, PGM-17 Thor, PGM-19 Jupiter, Mercury-Redstone, and the Juno series; it is therefore the direct ancestor of the engines used to launch the Saturn I and Saturn V moon rockets.

Development

Postwar Army missile studies

The V-1 inspired a range of US Army Air Force missile designs.

The Germans had introduced a number of new "wonder weapons" during the war that were of great interest to all the allied forces. Jet engines were already widely used after their introduction in the UK, but the V-1 flying bomb and V-2 rocket represented technologies that had not been developed elsewhere. In German use these weapons had relatively little strategic effect and had to be fired in the thousands to cause any real damage. But if armed with a nuclear weapon, even a single such weapon would cause damage equivalent to thousands of conventionally armed versions, and this line of research was quickly taken up by the US Army Air Force (USAAF) in late 1944.

Vannevar Bush of the USAAF's Scientific Advisory Board was convinced that manned or automated aircraft like the V-1 were the only possible solution for long range roles. A ballistic missile capable of carrying even the smallest warhead was "at least ten years away", and when asked directly about the topic, noted:

In my opinion, such a thing is impossible. I don't think anybody in the world knows how to do such a thing and I feel confident it will not be done for a very long time to come.

Army planners began planning for a wide variety of post-war missile systems that varied from short-range ballistic missiles to long range flying bombs. After considerable internal debate among Army branches, in August 1945 these were codified in a classified document outlining many such systems, among them a variety of cruise missiles, essentially V-1s with extended range and the greater payload needed to carry a nuclear warhead. There were three broad outlines depending on range, one for a missile flying 175 to 500 miles (282–805 km), another 500 to 1,500 miles (800–2,410 km), and finally one for 1,500 to 5,000 miles (2,400–8,000 km). Both subsonic and supersonic designs would be considered.

Competing designs

The various proposals were sent to seventeen aviation firms on 31 October 1945. Of the many proposals received, six companies were granted development contracts. Submissions for the longer-range requirements were all based on cruise missile designs, while the shorter-range examples were a mixture of designs. These were assigned designations in keeping with the USAAF's Experimental Engineering Section's "MX" series.

NAA chief designer, Dutch Kindelberger, was convinced missiles were the future, and hired William Bollay from the US Navy's Bureau of Aeronautics to run their newly formed research laboratory. Bollay had previously run the Navy's turbojet development. Bollay arrived to find the Army proposals, and decided to submit a short-range design based on a winged ballistic missile based on the German A-4b design (sometimes known as the A-9), a development of the basic V-2. On 24 March 1946, NAA received letter contract W33-038-ac-1491 for this missile, designated MX-770. The initial design called for a range of 500 miles (800 km) with a 2,000-pound (910 kg) payload, but on 26 July this was increased to 3,000 pounds (1,400 kg).

A number of other designs were also accepted, but these were all cruise missile designs to fill the longer range requirements. These were Martin's MX-771-A for a subsonic missile and -B for a supersonic version, MX-772-A and -B from Curtiss-Wright, MX-773-A and -B from Republic Aircraft, and MX-775-A and -B from Northrop. It was intended that one subsonic and one supersonic design would be put into production, and these were granted the designations SSM-A-1 and SSM-A-2, respectively. The only ballistic missile in the group, MX-774, went to Consolidated-Vultee.

When President Harry S. Truman ordered a massive cut in military spending for FY1947, as part of the Truman Doctrine, the USAAF was forced to make major cuts to their missile development program. Missile funding was cut from $29 million to $13 million (from $380 million to $170 million in today's dollars). In what became known as "the black Christmas of 1946", many of the original projects were cancelled, with the remaining companies working on a single design instead of two. Only Martin continued development of a subsonic design, their MX-771-A, delivering the first SSM-A-1 Matador in 1949. The rest of the companies were told to work only on supersonic designs.

Engine work

NAA began experimenting with rocket engines in 1946, firing the rockets in the company parking lot and protecting the cars by parking a bulldozer in front of the engines. They first used a 1,100-pound-force (4,900 N) design from Aerojet, and then designed their own model of 300 pounds-force (1,300 N). By the spring of 1946, captured German data was being disseminated around the industry. In June 1946 the team decided to abandon their own designs and build a new engine based on the V-2's Model 39.

In late 1946, two Model 39 engines were sent to NAA for study, where they were referred to as the XLR-41 Mark I. "XLR" referred to "eXperimental Liquid Rocket", a new designation system being used by the Army Air Force. They used these as the basis for conversion from metric to SAE measurements and US construction techniques, which they called the Mark II.

During this period, the company received a number of late-war reports on developments of a Model 39a engine for the V-2, which replaced the original model's eighteen separate combustion chambers with a single "shower head" plate inside a single larger chamber. This not only simplified the design, it also made it lighter and improved performance. The Germans were never able to get this working due to combustion instability and continued using the earlier design in spite of lower performance.

The team that had designed the engine was now in the United States after being captured as part of Operation Paperclip. Many of them were setting up a new Army-funded research effort under the direction of Wernher von Braun. The company hired Dieter Huzel to act as a coordinator between NAA and the Army missile team. In September 1947, the company began the design of an engine incorporating the showerhead design, which they called the Mark III. Initially, the goal was to match the 56,000 pounds-force (250,000 N) thrust of the Model 39, but be 15% lighter.

Work on the Mark II continued and the detailed design was completed in June 1947. In March, the company rented a large tract of land in the western San Fernando Valley north of Los Angeles, in the Santa Susana Mountains, for use in testing large engines. A rocket test center was built, using $1 million (equivalent to $13,105,812 in 2022) of corporate funds and $1.5 million (equivalent to $19,658,718.3 in 2022) from the USAAF. The first parts began to arrive in September. Development of the Mark III proceeded in parallel using a scaled-down version developing 3,300 pounds-force (15,000 N) that could be fired in the parking lot. The team made a string of changes to this and eventually cured the combustion problems.

Evolving design

Another set of German research papers received by NAA concerned work on supersonic ramjets, which appeared to make a highly supersonic cruise missile design possible. Bollay began a series of parallel design projects; Phase 1 was the original boost-glide design, Phase 2 was a design that used ramjets, and Phase 3 was a study for what sort of booster rocket would be needed to get the Phase 2 vehicle up to speed from a vertical launch system.

Meanwhile, aerodynamicists in the company discovered that the A-4b's swept wing design was inherently unstable at transonic speeds. They redesigned the missile with a delta wing at the extreme rear, and canards at the nose. Engineers working on the inertial navigation system (INS) invented an entirely new design known as the Kinetic Double-Integrating Accelerometer (KDIA) that measured not only velocity as in the V-2's version, but then integrated that to provide the location as well. This meant that the autopilot simply had to compare the target location with the current location from the INS to develop a correction, if any, that needed to bring the missile back on target.

So, by June 1947, the original A-4b design had been changed at every point; the engine, airframe and navigation systems were now all new.

New concept

In September 1947 the US Air Force was split off from the US Army. As part of the split, the forces agreed to divide ongoing development projects based on range, with the Army taking all the projects with a range of 1,000 miles (1,600 km) or less, and the Air Force everything above that. MX-770 was well below that limit, but instead of handing it over to the Army's Ordnance Department who were working with von Braun on ballistic missiles, in February 1948 the Air Force instead requested that NAA double the range of the MX-770 to put it into the Air Force's domain.

Examining the work to date, NAA abandoned the boost-glide concept and moved to the ramjet powered cruise missile as the primary design. Even with the more efficient propulsion offered by the ramjets, the missile would have to be 33% larger to achieve the required range. This required a more powerful booster engine to power the launcher, so the requirement for the XLR-41 Mark III was raised to 75,000 pounds-force (330,000 N). The N-1 INS system drifted at a rate of 1 mile per hour, so at its maximum range it would not be able to meet the Air Force's 2,500-foot (760 m) CEP. The company began development of the N-2 to fill this need and provide considerable headroom if greater range was requested. It was essentially the mechanism of the N-1 paired to a star tracker which would provide midcourse updates to correct for any accumulated drift.

The Air Force assigned the missile the XSSM-A-2 designation, and then outlined a three-stage development plan. For Phase 1, the existing design would be used for technology development and as a testbed for various launch concepts, including the original booster concept, as well as rocket-track launches and air dropped versions. Phase 2 would extend the range of the missile to 2,000 to 3,000 miles (3,200–4,800 km), and Phase 3 would further increase that to an intercontinental 5,000 miles (8,000 km) while carrying a heavier 10,000 pounds (4,500 kg) warhead. The design evolution ended in July 1950 with the Air Force of Weapon System 104A specifications. Under this new requirement the purpose of the program was the development of a 5,500-mile (8,900 km) range nuclear missile.

WS-104A

Under WS-104A, the Navaho program was broken up into three guided missile efforts. The first of these missiles was the North American X-10, a flying subrange vehicle to prove the general aerodynamics, guidance, and control technologies for vehicles two and three. The X-10 was essentially an unmanned high performance jet, powered by two afterburning Westinghouse J40 turbojets and equipped with retractable landing gear for take off and landing. It was capable of speeds up to Mach 2 and could fly almost 500 miles (800 km). Its success at Edwards AFB and then at Cape Canaveral set the stage for the development of the second vehicle: XSSM-A-4, Navaho II, or G-26.

Step two, the G-26, was a nearly full-size Navaho nuclear vehicle. Launched vertically by a liquid-fuel rocket booster, the G-26 would rocket upward until it had reached a speed of approximately Mach 3 and an altitude of 50,000 ft (15,000 m). At this point the booster would be expended and the vehicle's ramjets ignited to power the vehicle to its target. The G-26 made a total of 10 launches from Launch Complex 9 (LC-9) at Cape Canaveral Air Force Station (CCAFS) between 1956 and 1957. Launch Complex 10 (LC-10) was also assigned to the Navaho program, but no G-26s were ever launched from it (it was only used for ground tests of the planned portable launcher).

The dual engine (XLR-71-NA-1) of the SM-64 Navaho at the Udvar-Hazy Center

The final operational version, the G-38 or XSM-64A, was the same basic design as the G-26 only larger. It incorporated numerous new technologies, Titanium components, gimballed rocket engines, a Kerosene/LOX propellant combination, and full solid-state electronic controls. None were ever flown, the program being cancelled before the first unit was completed. The advanced rocket booster technology went on to be used in other missiles including the Atlas intercontinental ballistic missile and the inertial guidance system was later used as the guidance system on the first U.S. nuclear-powered submarines.

Development of the first-stage rocket engine for the Navaho began with two refurbished V-2 engines in 1947. That same year, the phase II engine was designed, the XLR-41-NA-1, a simplified version of the V-2 engine made from American parts. The phase III engine, XLR-43-NA-1 (also called 75K), adopted a cylindrical combustion chamber with the experimental German impinging-stream injector plate. Engineers at North American solved the combustion stability problem, which had prevented it being used in the V-2, and the engine was successfully tested at full power in 1951. The Phase IV engine, XLR-43-NA-3 (120K), replaced the poorly-cooled heavy German engine wall with a brazed tubular ("spaghetti") construction, which was becoming the new standard method for regenerative cooling in American engines. A dual-engine version of this, XLR-71-NA-1 (240K), was used in the G-26 Navaho. With improved cooling, a more powerful kerosene-burning version was developed for the triple-engine XLR-83-NA-1 (405K), used in the G-38 Navaho. With all the elements of a modern engine (except a bell-shaped nozzle), this led to designs for the Atlas, Thor and Titan engines.

Operational history

The first launch attempt, on 6 November 1956, failed after 26 seconds of flight. Ten failed launches followed, before another got off successfully, on 22 March 1957, for 4 minutes, 39 seconds of flight. A 25 April attempt exploded seconds after liftoff, while a 26 June flight lasted only 4 minutes, 29 seconds.

Officially, the program was canceled on 13 July 1957, after the first four launches ended in failure. In reality the program was obsolete by mid-1957 as the first Atlas ICBM began flight tests in June and the Jupiter and Thor IRBMs were showing great promise. These ballistic missiles however would not have been possible without the liquid fuel rocket engine developments accomplished in the Navaho program. The launch of the Soviet Satellite Sputnik in October 1957 only finished Navaho as the Air Force shifted its research money into ICBMs. But the technologies developed for the Navaho were reused in 1957 for the development of the AGM-28 Hound Dog, a nuclear cruise missile which entered in production in 1959.

The Soviet Union had been working on parallel projects, The Myasishchev RSS-40 "Buran" and Lavochkin "Burya" and a little later, the Tupolev Tu-123. The first two types were also large rocket-boosted ramjets, while the third was a turbojet-powered machine. With the cancellation of the Navaho and the promise of ICBMs in the strategic missile role, the first two were canceled as well, though the Lavochkin project, which had some successful test flights, was carried on for research and development purposes, and the Tupolev was reworked as a big, fast reconnaissance drone.

Operators

Survivors

Navaho on display at CCAFS, Florida

One remaining X-10 is on display at the United States Air Force Museum Annex at Wright-Patterson AFB, OH.

A Navaho booster rocket, though not marked as such, is currently displayed in front of a VFW post in Fort McCoy, Florida.

The other remaining Navaho missile was previously displayed outside the south entrance gate of Cape Canaveral Air Force Station, Florida. This survivor was damaged by Hurricane Matthew on 7 October 2016, but was restored by the Space and Missile Museum Foundation and reinstalled in March, 2021.

Notable appearances in media

The 1960s series Men Into Space used footage of the SM-64 and X-10 tests at Edwards AFB to depict spacecraft landings on a desert runway.

Specifications

General characteristics

  • Length: 67 ft 11 in (20.7 m)
  • Wingspan: 28 ft 7 in (8.71 m)
  • Gross weight: 64,850 lb (29,420 kg)
  • Powerplant: 2 × Wright Aeronautical XRJ47-W-5 ramjets, 15,000 lbf (67 kN) thrust each
  • Powerplant: 2 × XLR83-NA-1 rocket boosters, 200,000 lbf (890 kN) thrust each

Performance

  • Maximum speed: 1,700 kn (2,000 mph, 3,200 km/h) (design. Reality 2 500 km/h)
  • Maximum speed: Mach 3
  • Range: 3,500 nmi (4,000 mi, 6,500 km) (design)
  • Service ceiling: 77,000 ft (23,000 m)
  • Thrust/weight: 0.46

Armament

  • 1 × W41 nuclear warhead

List of human positions

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Lis...