Search This Blog

Sunday, January 24, 2016

General Circulation Model


From Wikipedia, the free encyclopedia


This visualization shows early test renderings of a global computational model of Earth's atmosphere based on data from NASA's Goddard Earth Observing System Model, Version 5 (GEOS-5).

A general circulation model (GCM) is a type of climate model. It employs a mathematical model of the general circulation of a planetary atmosphere or ocean. It uses the Navier–Stokes equations on a rotating sphere with thermodynamic terms for various energy sources (radiation, latent heat). These equations are the basis for computer programs used to simulate the Earth's atmosphere or oceans. Atmospheric and oceanic GCMs (AGCM and OGCM) are key components along with sea ice and land-surface components.

GCMs and global climate models are used for weather forecasting, understanding the climate and forecasting climate change.

Versions designed for decade to century time scale climate applications were originally created by Syukuro Manabe and Kirk Bryan at the Geophysical Fluid Dynamics Laboratory in Princeton, New Jersey.[1] These models are based on the integration of a variety of fluid dynamical, chemical and sometimes biological equations.

Terminology

The acronym GCM originally stood for General Circulation Model. Recently, a second meaning came into use, namely Global Climate Model. While these do not refer to the same thing, General Circulation Models are typically the tools used for modelling climate, and hence the two terms are sometimes used interchangeably. However, the term "global climate model" is ambiguous and may refer to an integrated framework that incorporates multiple components including a general circulation model, or may refer to the general class of climate models that use a variety of means to represent the climate mathematically.

History

In 1956, Norman Phillips developed a mathematical model that could realistically depict monthly and seasonal patterns in the troposphere. It became the first successful climate model.[2][3] Following Phillips's work, several groups began working to create GCMs.[4] The first to combine both oceanic and atmospheric processes was developed in the late 1960s at the NOAA Geophysical Fluid Dynamics Laboratory.[1] By the early 1980s, the United States' National Center for Atmospheric Research had developed the Community Atmosphere Model; this model has been continuously refined.[5] In 1996, efforts began to model soil and vegetation types.[6] Later the Hadley Centre for Climate Prediction and Research's HadCM3 model coupled ocean-atmosphere elements.[4] The role of gravity waves was added in the mid-1980s. Gravity waves are required to simulate regional and global scale circulations accurately.[7]

Atmospheric and oceanic models

Atmospheric (AGCMs) and oceanic GCMs (OGCMs) can be coupled to form an atmosphere-ocean coupled general circulation model (CGCM or AOGCM). With the addition of submodels such as a sea ice model or a model for evapotranspiration over land, AOGCMs become the basis for a full climate model.[8]

Trends

A recent trend in GCMs is to apply them as components of Earth system models, e.g. by coupling ice sheet models for the dynamics of the Greenland and Antarctic ice sheets, and one or more chemical transport models (CTMs) for species important to climate. Thus a carbon CTM may allow a GCM to better predict anthropogenic changes in carbon dioxide concentrations. In addition, this approach allows accounting for inter-system feedback: e.g. chemistry-climate models allow the possible effects of climate change on ozone hole to be studied.[9]

Climate prediction uncertainties depend on uncertainties in chemical, physical and social models (see IPCC scenarios below).[10] Significant uncertainties and unknowns remain, especially regarding the future course of human population, industry and technology.

Structure

Three-dimensional (more properly four-dimensional) GCMs apply discrete equations for fluid motion and integrate these forward in time. They contain parameterisations for processes such as convection that occur on scales too small to be resolved directly.

A simple general circulation model (SGCM) consists of a dynamic core that relates properties such as temperature to others such as pressure and velocity. Examples are programs that solve the primitive equations, given energy input and energy dissipation in the form of scale-dependent friction, so that atmospheric waves with the highest wavenumbers are most attenuated. Such models may be used to study atmospheric processes, but are not suitable for climate projections.

Atmospheric GCMs (AGCMs) model the atmosphere (and typically contain a land-surface model as well) using imposed sea surface temperatures (SSTs).[11] They may include atmospheric chemistry.
AGCMs consist of a dynamical core which integrates the equations of fluid motion, typically for:
  • surface pressure
  • horizontal components of velocity in layers
  • temperature and water vapor in layers
  • radiation, split into solar/short wave and terrestrial/infra-red/long wave
  • parameters for:
A GCM contains prognostic equations that are a function of time (typically winds, temperature, moisture, and surface pressure) together with diagnostic equations that are evaluated from them for a specific time period. As an example, pressure at any height can be diagnosed by applying the hydrostatic equation to the predicted surface pressure and the predicted values of temperature between the surface and the height of interest. Pressure is used to compute the pressure gradient force in the time-dependent equation for the winds.

OGCMs model the ocean (with fluxes from the atmosphere imposed) and may contain a sea ice model. For example, the standard resolution of HadOM3 is 1.25 degrees in latitude and longitude, with 20 vertical levels, leading to approximately 1,500,000 variables.

AOGCMs (e.g. HadCM3, GFDL CM2.X) combine the two submodels. They remove the need to specify fluxes across the interface of the ocean surface. These models are the basis for model predictions of future climate, such as are discussed by the IPCC. AOGCMs internalise as many processes as possible. They have been used to provide predictions at a regional scale. While the simpler models are generally susceptible to analysis and their results are easier to understand, AOGCMs may be nearly as hard to analyse as the climate itself.

Grid

The fluid equations for AGCMs are made discrete using either the finite difference method or the spectral method. For finite differences, a grid is imposed on the atmosphere. The simplest grid uses constant angular grid spacing (i.e., a latitude / longitude grid). However, non-rectantangular grids (e.g., icosahedral) and grids of variable resolution[12] are more often used.[13] The LMDz model can be arranged to give high resolution over any given section of the planet. HadGEM1 (and other ocean models) use an ocean grid with higher resolution in the tropics to help resolve processes believed to be important for the El Niño Southern Oscillation (ENSO). Spectral models generally use a gaussian grid, because of the mathematics of transformation between spectral and grid-point space. Typical AGCM resolutions are between 1 and 5 degrees in latitude or longitude: HadCM3, for example, uses 3.75 in longitude and 2.5 degrees in latitude, giving a grid of 96 by 73 points (96 x 72 for some variables); and has 19 vertical levels. This results in approximately 500,000 "basic" variables, since each grid point has four variables (u,v, T, Q), though a full count would give more (clouds; soil levels). HadGEM1 uses a grid of 1.875 degrees in longitude and 1.25 in latitude in the atmosphere; HiGEM, a high-resolution variant, uses 1.25 x 0.83 degrees respectively.[14] These resolutions are lower than is typically used for weather forecasting.[15] Ocean resolutions tend to be higher, for example HadCM3 has 6 ocean grid points per atmospheric grid point in the horizontal.

For a standard finite difference model, uniform gridlines converge towards the poles. This would lead to computational instabilities (see CFL condition) and so the model variables must be filtered along lines of latitude close to the poles. Ocean models suffer from this problem too, unless a rotated grid is used in which the North Pole is shifted onto a nearby landmass. Spectral models do not suffer from this problem. Some experiments use geodesic grids[16] and icosahedral grids, which (being more uniform) do not have pole-problems. Another approach to solving the grid spacing problem is to deform a Cartesian cube such that it covers the surface of a sphere.[17]

Flux buffering

Some early versions of AOGCMs required an ad hoc process of "flux correction" to achieve a stable climate. This resulted from separately prepared ocean and atmospheric models that each used an implicit flux from the other component different than that component could produce. Such a model failed to match observations. However, if the fluxes were 'corrected', the factors that led to these unrealistic fluxes might be unrecognised, which could affect model sensitivity. As a result the vast majority of models used in the current round of IPCC reports do not use them. The model improvements that now make flux corrections unnecessary include improved ocean physics, improved resolution in both atmosphere and ocean, and more physically consistent coupling between atmosphere and ocean submodels. Improved models now maintain stable, multi-century simulations of surface climate that are considered to be of sufficient quality to allow their use for climate projections.[18]

Convection

Moist convection releases latent heat and is important to the Earth's energy budget. Convection occurs on too small a scale to be resolved by climate models, and hence it must be handled via parameters. This has been done since the 1950s. Akio Arakawa did much of the early work, and variants of his scheme are still used,[19] although a variety of different schemes are now in use.[20][21][22] Clouds are also typically handled with a parameter, for a similar lack of scale. Limited understanding of clouds has limited the success of this strategy, but not due to some inherent shortcoming of the method.[23]

Software

Most models include software to diagnose a wide range of variables for comparison with observations or study of atmospheric processes. An example is the 1.5-metre temperature, which is the standard height for near-surface observations of air temperature. This temperature is not directly predicted from the model but is deduced from surface and lowest-model-layer temperatures. Other software is used for creating plots and animations.

Projections

File:Animation of projected annual mean surface air temperature from 1970-2100, based on SRES emissions scenario A1B (NOAA GFDL CM2.1).webmPlay media
Projected annual mean surface air temperature from 1970-2100, based on SRES emissions scenario A1B, using the NOAA GFDL CM2.1 climate model (credit: NOAA Geophysical Fluid Dynamics Laboratory).[24]

Coupled AOGCMs use transient climate simulations to project/predict climate changes under various scenarios. These can be idealised scenarios (most commonly, CO2 emissions increasing at 1%/yr) or based on recent history (usually the "IS92a" or more recently the SRES scenarios). Which scenarios are most realistic remains uncertain.

The 2001 IPCC Third Assessment Report F igure 9.3 shows the global mean response of 19 different coupled models to an idealised experiment in which emissions increased at 1% per year.[25] Figure 9.5 shows the response of a smaller number of models to more recent trends. For the 7 climate models shown there, the temperature change to 2100 varies from 2 to 4.5 °C with a median of about 3 °C.

Future scenarios do not include unknown events – for example, volcanic eruptions or changes in solar forcing. These effects are believed to be small in comparison to greenhouse gas (GHG) forcing in the long term, but large volcanic eruptions, for example, can exert a substantial temporary cooling effect.
Human GHG emissions are a model input, although it is possible to include an economic/technological submodel to provide these as well. Atmospheric GHG levels are usually supplied as an input, though it is possible to include a carbon cycle model that reflects vegetation and oceanic processes to calculate such levels.

Emissions scenarios

In the 21st century, changes in global mean temperature are projected to vary across the world
Projected change in annual mean surface air temperature from the late 20th century to the middle 21st century, based on SRES emissions scenario A1B (credit: NOAA Geophysical Fluid Dynamics Laboratory).[24]

For the six SRES marker scenarios, IPCC (2007:7–8) gave a "best estimate" of global mean temperature increase (2090–2099 relative to the period 1980–99) of 1.8 °C to 4.0 °C.[26] Over the same time period, the "likely" range (greater than 66% probability, based on expert judgement) for these scenarios was for a global mean temperature increase of 1.1 to 6.4 °C.[26]

In 2008 a study made climate projections using several emission scenarios.[27] In a scenario where global emissions start to decrease by 2010 and then declined at a sustained rate of 3% per year, the likely global average temperature increase was predicted to be 1.7 °C above pre-industrial levels by 2050, rising to around 2 °C by 2100. In a projection designed to simulate a future where no efforts are made to reduce global emissions, the likely rise in global average temperature was predicted to be 5.5 °C by 2100. A rise as high as 7 °C was thought possible, although less likely.

Another no-reduction scenario resulted in a median warming over land (2090–99 relative to the period 1980–99) of 5.1 °C. Under the same emissions scenario but with a different model, the predicted median warming was 4.1 °C.[28]

Model accuracy


SST errors in HadCM3

North American precipitation from various models.

Temperature predictions from some climate models assuming the SRES A2 emissions scenario.

AOGCMs internalise as many processes as are sufficiently understood. However, they are still under development and significant uncertainties remain. They may be coupled to models of other processes, such as the carbon cycle, so as to better model feedbacks. Most recent simulations show "plausible" agreement with the measured temperature anomalies over the past 150 years, when driven by observed changes in greenhouse gases and aerosols. Agreement improves by including both natural and anthropogenic forcings.[29][30]

Imperfect models may nevertheless produce useful results. GCMs are capable of reproducing the general features of the observed global temperature over the past century.[29]

A debate over how to reconcile climate model predictions that upper air (tropospheric) warming should be greater than observed surface warming, some of which appeared to show otherwise,[31] was resolved in favour of the models, following data revisions.

Cloud effects are a significant area of uncertainty in climate models. Clouds have competing effects on climate. They cool the surface by reflecting sunlight into space; they warm it by increasing the amount of infrared radiation transmitted from the atmosphere to the surface.[32] In the 2001 IPCC report possible changes in cloud cover were highlighted as a major uncertainty in predicting climate.[33][34]

Climate researchers around the world use climate models to understand the climate system. Thousands of papers have been published about model-based studies. Part of this research is to improve the models.

In 2000, a comparison between measurements and dozens of GCM simulations of ENSO-driven tropical precipitation, water vapor, temperature, and outgoing longwave radiation found similarity between measurements and simulation of most factors. However the simulated change in precipitation was about one-fourth less than what was observed. Errors in simulated precipitation imply errors in other processes, such as errors in the evaporation rate that provides moisture to create precipitation. The other possibility is that the satellite-based measurements are in error. Either indicates progress is required in order to monitor and predict such changes.[35]

A more complete discussion of climate models is provided in the IPCC's Third Assessment Report.[36]
  • The model mean exhibits good agreement with observations.
  • The individual models often exhibit worse agreement with observations.
  • Many of the non-flux adjusted models suffered from unrealistic climate drift up to about 1 °C/century in global mean surface temperature.
  • The errors in model-mean surface air temperature rarely exceed 1 °C over the oceans and 5 °C over the continents; precipitation and sea level pressure errors are relatively greater but the magnitudes and patterns of these quantities are recognisably similar to observations.
  • Surface air temperature is particularly well simulated, with nearly all models closely matching the observed magnitude of variance and exhibiting a correlation > 0.95 with the observations.
  • Simulated variance of sea level pressure and precipitation is within ±25% of observed.
  • All models have shortcomings in their simulations of the present day climate of the stratosphere, which might limit the accuracy of predictions of future climate change.
    • There is a tendency for the models to show a global mean cold bias at all levels.
    • There is a large scatter in the tropical temperatures.
    • The polar night jets in most models are inclined poleward with height, in noticeable contrast to an equatorward inclination of the observed jet.
    • There is a differing degree of separation in the models between the winter sub-tropical jet and the polar night jet.
  • For nearly all models the r.m.s. error in zonal- and annual-mean surface air temperature is small compared with its natural variability.
    • There are problems in simulating natural seasonal variability.[citation needed] ( 2000)
      • In flux-adjusted models, seasonal variations are simulated to within 2 K of observed values over the oceans. The corresponding average over non-flux-adjusted models shows errors up to about 6 K in extensive ocean areas.
      • Near-surface land temperature errors are substantial in the average over flux-adjusted models, which systematically underestimates (by about 5 K) temperature in areas of elevated terrain. The corresponding average over non-flux-adjusted models forms a similar error pattern (with somewhat increased amplitude) over land.
      • In Southern Ocean mid-latitudes, the non-flux-adjusted models overestimate the magnitude of January-minus-July temperature differences by ~5 K due to an overestimate of summer (January) near-surface temperature. This error is common to five of the eight non-flux-adjusted models.
      • Over Northern Hemisphere mid-latitude land areas, zonal mean differences between July and January temperatures simulated by the non-flux-adjusted models show a greater spread (positive and negative) about observed values than results from the flux-adjusted models.
      • The ability of coupled GCMs to simulate a reasonable seasonal cycle is a necessary condition for confidence in their prediction of long-term climatic changes (such as global warming), but it is not a sufficient condition unless the seasonal cycle and long-term changes involve similar climatic processes.
  • Coupled climate models do not simulate with reasonable accuracy clouds and some related hydrological processes (in particular those involving upper tropospheric humidity). Problems in the simulation of clouds and upper tropospheric humidity, remain worrisome because the associated processes account for most of the uncertainty in climate model simulations of anthropogenic change.
The precise magnitude of future changes in climate is still uncertain;[37] for the end of the 21st century (2071 to 2100), for SRES scenario A2, the change of global average SAT change from AOGCMs compared with 1961 to 1990 is +3.0 °C (4.8 °F) and the range is +1.3 to +4.5 °C (+2 to +7.2 °F).

The IPCC's Fifth Assessment Report asserted "...very high confidence that models reproduce the general features of the global-scale annual mean surface temperature increase over the historical period." However, the report also observed that the rate of warming over the period 1998-2012 was lower than that predicted by 111 out of 114 Coupled Model Intercomparison Project climate models.[38]

Relation to weather forecasting

The global climate models used for climate projections are similar in structure to (and often share computer code with) numerical models for weather prediction, but are nonetheless logically distinct.
Most weather forecasting is done on the basis of interpreting numerical model results. Since forecasts are short—typically a few days or a week—such models do not usually contain an ocean model but rely on imposed SSTs. They also require accurate initial conditions to begin the forecast—typically these are taken from the output of a previous forecast, blended with observations. Predictions must require only a few hours; but because they only cover a one week the models can be run at higher resolution than in climate mode. Currently the ECMWF runs at 40 km (25 mi) resolution[39] as opposed to the 100-to-200 km (62-to-124 mi) scale used by typical climate model runs. Often local models are run using global model results for boundary conditions, to achieve higher local resolution: for example, the Met Office runs a mesoscale model with an 11 km (6.8 mi) resolution[40] covering the UK, and various agencies in the US employ models such as the NGM and NAM models. Like most global numerical weather prediction models such as the GFS, global climate models are often spectral models[41] instead of grid models. Spectral models are often used for global models because some computations in modeling can be performed faster, thus reducing run times.

Computations

Climate models use quantitative methods to simulate the interactions of the atmosphere, oceans, land surface and ice.

All climate models take account of incoming energy as short wave electromagnetic radiation, chiefly visible and short-wave (near) infrared, as well as outgoing energy as long wave (far) infrared electromagnetic radiation from the earth. Any imbalance results in a change in temperature.
The most talked-about models of recent years relate temperature to emissions of greenhouse gases. These models project an upward trend in the surface temperature record, as well as a more rapid increase in temperature at higher altitudes.[42]

Three (or more properly, four since time is also considered) dimensional GCM's discretise the equations for fluid motion and energy transfer and integrate these over time. They also contain parametrisations for processes such as convection that occur on scales too small to be resolved directly.

Atmospheric GCMs (AGCMs) model the atmosphere and impose sea surface temperatures as boundary conditions. Coupled atmosphere-ocean GCMs (AOGCMs, e.g. HadCM3, EdGCM, GFDL CM2.X, ARPEGE-Climat[43]) combine the two models.
Models range in complexity:
  • A simple radiant heat transfer model treats the earth as a single point and averages outgoing energy
  • This can be expanded vertically (radiative-convective models), or horizontally
  • Finally, (coupled) atmosphere–ocean–sea ice global climate models discretise and solve the full equations for mass and energy transfer and radiant exchange.
  • Box models treat flows across and within ocean basins.
Other submodels can be interlinked, such as land use, allowing researchers to predict the interaction between climate and ecosystems.

Other climate models

Earth-system models of intermediate complexity (EMICs)

The Climber-3 model uses a 2.5-dimensional statistical-dynamical model with 7.5° × 22.5° resolution and time step of 1/2 a day. An oceanic submodel is MOM-3 (Modular Ocean Model) with a 3.75° × 3.75° grid and 24 vertical levels.[44]

Radiative-convective models (RCM)

One-dimensional, radiative-convective models were used to verify basic climate assumptions in the '80s and '90s.[45]

Friday, January 22, 2016

Cloud forcing


From Wikipedia, the free encyclopedia

Cloud forcing (sometimes described as cloud radiative forcing) is, in meteorology, the difference between the radiation budget components for average cloud conditions and cloud-free conditions. Much of the interest in cloud forcing relates to its role as a feedback process in the present period of global warming.

All global climate models used for climate change projections include the effects of water vapor and cloud forcing. The models include the effects of clouds on both incoming (solar) and emitted (terrestrial) radiation.

Clouds increase the global reflection of solar radiation from 15% to 30%, reducing the amount of solar radiation absorbed by the Earth by about 44 W/m². This cooling is offset somewhat by the greenhouse effect of clouds which reduces the outgoing longwave radiation by about 31 W/m². Thus the net cloud forcing of the radiation budget is a loss of about 13 W/m².[1] If the clouds were removed with all else remaining the same, the Earth would gain this last amount in net radiation and begin to warm up. These numbers should not be confused with the usual radiative forcing concept, which is for the change in forcing related to climate change.

Without the inclusion of clouds, water vapor alone contributes 36% to 70% of the greenhouse effect on Earth. When water vapor and clouds are considered together, the contribution is 66% to 85%. The ranges come about because there are two ways to compute the influence of water vapor and clouds: the lower bounds are the reduction in the greenhouse effect if water vapor and clouds are removed from the atmosphere leaving all other greenhouse gases unchanged, while the upper bounds are the greenhouse effect introduced if water vapor and clouds are added to an atmosphere with no other greenhouse gases.[2] The two values differ because of overlap in the absorption and emission by the various greenhouse gases. Trapping of the long-wave radiation due to the presence of clouds reduces the radiative forcing of the greenhouse gases compared to the clear-sky forcing. However, the magnitude of the effect due to clouds varies for different greenhouse gases. Relative to clear skies, clouds reduce the global mean radiative forcing due to CO2 by about 15%,[3] that due to CH4 and N2O by about 20%,[3] and that due to the halocarbons by up to 30%.[4][5][6] Clouds remain one of the largest uncertainties in future projections of climate change by global climate models, owing to the physical complexity of cloud processes and the small scale of individual clouds relative to the size of the model computational grid.

Atmospheric thermodynamics


From Wikipedia, the free encyclopedia

Atmospheric thermodynamics is the study of heat to work transformations (and the reverse) in the earth's atmospheric system in relation to weather or climate. Following the fundamental laws of classical thermodynamics, atmospheric thermodynamics studies such phenomena as properties of moist air, formation of clouds, atmospheric convection, boundary layer meteorology, and vertical stabilities in the atmosphere. Atmospheric thermodynamic diagrams are used as tools in the forecasting of storm development. Atmospheric thermodynamics forms a basis for cloud microphysics and convection parameterizations in numerical weather models, and is used in many climate considerations, including convective-equilibrium climate models.

Overview

The atmosphere is an example of a non-equilibrium system.[1] Atmospheric thermodynamics focuses on water and its transformations. Areas of study include the law of energy conservation, the ideal gas law, specific heat capacities, adiabatic processes (in which entropy is conserved), and moist adiabatic processes. Most of tropospheric gases are treated as ideal gases and water vapor is considered as one of the most important trace components of air.

Advanced topics are phase transitions of water, homogeneous and inhomogeneous nucleation, effect of dissolved substances on cloud condensation, role of supersaturation on formation of ice crystals and cloud droplets. Considerations of moist air and cloud theories typically involve various temperatures, such as equivalent potential temperature, wet-bulb and virtual temperatures. Connected areas are energy, momentum, and mass transfer, turbulence interaction between air particles in clouds, convection, dynamics of tropical cyclones, and large scale dynamics of the atmosphere.

The major role of atmospheric thermodynamics is expressed in terms of adiabatic and diabatic forces acting on air parcels included in primitive equations of air motion either as grid resolved or subgrid parameterizations. These equations form a basis for the numerical weather and climate predictions.

History

In the early 19th century thermodynamicists such as Sadi Carnot, Rudolf Clausius, and Émile Clapeyron developed mathematical models on the dynamics of bodies fluids and vapors related to the combustion and pressure cycles of atmospheric steam engines; one example is the Clausius–Clapeyron equation. In 1873, thermodynamicist Willard Gibbs published "Graphical Methods in the Thermodynamics of Fluids."

Thermodynamic diagram developed in the 19th century is still used to calculate quantities such as convective available potential energy or air stability.

These sorts of foundations naturally began to be applied towards the development of theoretical models of atmospheric thermodynamics which drew the attention of the best minds. Papers on atmospheric thermodynamics appeared in the 1860s that treated such topics as dry and moist adiabatic processes. In 1884 Heinrich Hertz devised first atmospheric thermodynamic diagram (emagram).[2] Pseudo-adiabatic process was coined by von Bezold describing air as it is lifted, expands, cools, and eventually precipitates its water vapor; in 1888 he published voluminous work entitled "On the thermodynamics of the atmosphere".[3]

In 1911 von Alfred Wegener published a book "Thermodynamik der Atmosphäre", Leipzig, J. A. Barth. From here the development of atmospheric thermodynamics as a branch of science began to take root. The term "atmospheric thermodynamics", itself, can be traced to Frank W. Verys 1919 publication: "The radiant properties of the earth from the standpoint of atmospheric thermodynamics" (Occasional scientific papers of the Westwood Astrophysical Observatory). By the late 1970s various textbooks on the subject began to appear. Today, atmospheric thermodynamics is an integral part of weather forecasting.

Chronology

  • 1751 Charles Le Roy recognized dew point temperature as point of saturation of air
  • 1782 Jacques Charles made hydrogen balloon flight measuring temperature and pressure in Paris
  • 1784 Concept of variation of temperature with height was suggested
  • 1801-1803 John Dalton developed his laws of pressures of vapours
  • 1804 Joseph Louis Gay-Lussac made balloon ascent to study weather
  • 1805 Pierre Simon Laplace developed his law of pressure variation with height
  • 1841 James Pollard Espy publishes paper on convection theory of cyclone energy
  • 1889 Hermann von Helmholtz and John William von Bezold used the concept of potential temperature, von Bezold used adiabatic lapse rate and pseudoadiabat
  • 1893 Richard Asman constructs first aerological sonde (pressure-temperature-humidity)
  • 1894 John Wilhelm von Bezold used concept of equivalent temperature
  • 1926 Sir Napier Shaw introduced tephigram
  • 1933 Tor Bergeron published paper on "Physics of Clouds and Precipitation" describing precipitation from supercooled (due to condensational growth of ice crystals in presence of water drops)
  • 1946 Vincent J. Schaeffer and Irving Langmuir performed the first cloud-seeding experiment
  • 1986 K. Emanuel conceptualizes tropical cyclone as Carnot heat engine

Applications

Hadley Circulation

The Hadley Circulation can be considered as a heat engine.[4] The Hadley circulation is identified with rising of warm and moist air in the equatorial region with the descent of colder air in the subtropics corresponding to a thermally driven direct circulation, with consequent net production of kinetic energy. The thermodynamic efficiency of the Hadley system, considered as a heat engine, has been relatively constant over the 1979~2010 period, averaging 2.6%. Over the same interval, the power generated by the Hadley regime has risen at an average rate of about 0.54 TW per yr; this reflects an increase in energy input to the system consistent with the observed trend in the tropical sea surface temperatures.

Tropical cyclone Carnot cycle


Air is being moistened as it travels toward convective system. Ascending motion in a deep convective core produces air expansion, cooling, and condensation. Upper level outflow visible as an anvil cloud is eventually descending conserving mass (rysunek - Robert Simmon).

The thermodynamic structure of the hurricane can be modelled as a heat engine [5] running between sea temperature of about 300K and tropopause which has temperature of about 200K. Parcels of air traveling close to the surface take up moisture and warm, ascending air expands and cools releasing moisture (rain) during the condensation. The release of latent heat energy during the condensation provides mechanical energy for the hurricane. Both a decreasing temperature in the upper troposphere or an increasing temperature of the atmosphere close to the surface will increase the maximum winds observed in hurricanes. When applied to hurricane dynamics it defines a Carnot heat engine cycle and predicts maximum hurricane intensity.

Water vapor and global climate change

The Clausius–Clapeyron relation shows how the water-holding capacity of the atmosphere increases by about 8% per Celsius increase in temperature. (It does not directly depend on other parameters like the pressure or density.) This water-holding capacity, or "equilibrium vapor pressure", can be approximated using the August-Roche-Magnus formula
 e_s(T)= 6.1094 \exp \left( \frac{17.625T}{T+243.04} \right)
(where e_s(T) is the equilibrium or saturation vapor pressure in hPa, and T is temperature in degrees Celsius). This shows that when atmospheric temperature increases (e.g., due to greenhouse gases) the absolute humidity should also increase exponentially (assuming a constant relative humidity). However, this purely thermodynamic argument is subject of considerable debate because convective processes might cause extensive drying due to increased areas of subsidence, efficiency of precipitation could be influenced by the intensity of convection, and because cloud formation is related to relative humidity.[citation needed]

Thursday, January 21, 2016

Greenhouse gas


From Wikipedia, the free encyclopedia
refer to caption and image description
Greenhouse effect schematic showing energy flows between space, the atmosphere, and Earth's surface. Energy influx and emittance are expressed in watts per square meter (W/m2).

A greenhouse gas (sometimes abbreviated GHG) is a gas in an atmosphere that absorbs and emits radiation within the thermal infrared range. This process is the fundamental cause of the greenhouse effect.[1] The primary greenhouse gases in Earth's atmosphere are water vapor, carbon dioxide, methane, nitrous oxide, and ozone. Without greenhouse gases, the average temperature of Earth's surface would be about 15 °C (27 °F) colder than the present average of 14 °C (57 °F).[2][3][4] In the Solar System, the atmospheres of Venus, Mars and Titan also contain gases that cause a greenhouse effect.

Human activities since the beginning of the Industrial Revolution (taken as the year 1750) have produced a 40% increase in the atmospheric concentration of carbon dioxide, from 280 ppm in 1750 to 400 ppm in 2015.[5][6] This increase has occurred despite the uptake of a large portion of the emissions by various natural "sinks" involved in the carbon cycle.[7][8] Anthropogenic carbon dioxide (CO2) emissions (i.e. emissions produced by human activities) come from combustion of carbon-based fuels, principally coal, oil, and natural gas, along with deforestation.[9]

It has been estimated that if greenhouse gas emissions continue at the present rate, Earth's surface temperature could exceed historical values as early as 2047, with potentially harmful effects on ecosystems, biodiversity and the livelihoods of people worldwide.[10]

Gases in Earth's atmosphere

Greenhouse gases

refer to caption and adjacent text
Atmospheric absorption and scattering at different wavelengths of electromagnetic waves. The largest absorption band of carbon dioxide is in the infrared.

Greenhouse gases are those that absorb and emit infrared radiation in the wavelength range emitted by Earth.[1] In order, the most abundant greenhouse gases in Earth's atmosphere are:
Atmospheric concentrations of greenhouse gases are determined by the balance between sources (emissions of the gas from human activities and natural systems) and sinks (the removal of the gas from the atmosphere by conversion to a different chemical compound).[11] The proportion of an emission remaining in the atmosphere after a specified time is the "airborne fraction" (AF). More precisely, the annual AF is the ratio of the atmospheric increase in a given year to that year's total emissions. For CO2 the AF over the last 50 years (1956–2006) has been increasing at 0.25 ± 0.21%/year.[12]

Non-greenhouse gases

Although contributing to many other physical and chemical reactions, the major atmospheric constituents, nitrogen (N
2
), oxygen (O
2
), and argon (Ar), are not greenhouse gases. This is because molecules containing two atoms of the same element such as N
2
and O
2
and monatomic molecules such as argon (Ar) have no net change in their dipole moment when they vibrate and hence are almost totally unaffected by infrared radiation. Although molecules containing two atoms of different elements such as carbon monoxide (CO) or hydrogen chloride (HCl) absorb IR, these molecules are short-lived in the atmosphere owing to their reactivity and solubility. Because CO and HCl do not contribute significantly to the greenhouse effect, they are usually omitted when discussing greenhouse gases.

Indirect radiative effects

world map of carbon monoxide concentrations in the lower atmosphere
The false colors in this image represent concentrations of carbon monoxide in the lower atmosphere, ranging from about 390 parts per billion (dark brown pixels), to 220 parts per billion (red pixels), to 50 parts per billion (blue pixels).[13]

Some gases have indirect radiative effects (whether or not they are greenhouse gases themselves). This happens in two main ways. One way is that when they break down in the atmosphere they produce another greenhouse gas. For example, methane and carbon monoxide (CO) are oxidized to give carbon dioxide (and methane oxidation also produces water vapor; that will be considered below). Oxidation of CO to CO2 directly produces an unambiguous increase in radiative forcing although the reason is subtle. The peak of the thermal IR emission from Earth's surface is very close to a strong vibrational absorption band of CO2 (667 cm−1). On the other hand, the single CO vibrational band only absorbs IR at much higher frequencies (2145 cm−1), where the ~300 K thermal emission of the surface is at least a factor of ten lower. On the other hand, oxidation of methane to CO2, which requires reactions with the OH radical, produces an instantaneous reduction, since CO2 is a weaker greenhouse gas than methane; but it has a longer lifetime. As described below this is not the whole story, since the oxidations of CO and CH
4
are intertwined by both consuming OH radicals. In any case, the calculation of the total radiative effect needs to include both the direct and indirect forcing.

A second type of indirect effect happens when chemical reactions in the atmosphere involving these gases change the concentrations of greenhouse gases. For example, the destruction of non-methane volatile organic compounds (NMVOCs) in the atmosphere can produce ozone. The size of the indirect effect can depend strongly on where and when the gas is emitted.[14]

Methane has a number of indirect effects in addition to forming CO2. Firstly, the main chemical that destroys methane in the atmosphere is the hydroxyl radical (OH). Methane reacts with OH and so more methane means that the concentration of OH goes down. Effectively, methane increases its own atmospheric lifetime and therefore its overall radiative effect. The second effect is that the oxidation of methane can produce ozone. Thirdly, as well as making CO2 the oxidation of methane produces water; this is a major source of water vapor in the stratosphere, which is otherwise very dry. CO and NMVOC also produce CO2 when they are oxidized. They remove OH from the atmosphere and this leads to higher concentrations of methane. The surprising effect of this is that the global warming potential of CO is three times that of CO2.[15] The same process that converts NMVOC to carbon dioxide can also lead to the formation of tropospheric ozone. Halocarbons have an indirect effect because they destroy stratospheric ozone. Finally hydrogen can lead to ozone production and CH
4
increases as well as producing water vapor in the stratosphere.[14]

Contribution of clouds to Earth's greenhouse effect

The major non-gas contributor to Earth's greenhouse effect, clouds, also absorb and emit infrared radiation and thus have an effect on radiative properties of the greenhouse gases. Clouds are water droplets or ice crystals suspended in the atmosphere.[16][17]

Impacts on the overall greenhouse effect

refer to caption and adjacent text
Schmidt et al. (2010)[18] analysed how individual components of the atmosphere contribute to the total greenhouse effect. They estimated that water vapor accounts for about 50% of Earth's greenhouse effect, with clouds contributing 25%, carbon dioxide 20%, and the minor greenhouse gases and aerosols accounting for the remaining 5%. In the study, the reference model atmosphere is for 1980 conditions. Image credit: NASA.[19]

The contribution of each gas to the greenhouse effect is affected by the characteristics of that gas, its abundance, and any indirect effects it may cause. For example, the direct radiative effect of a mass of methane is about 72 times stronger than the same mass of carbon dioxide over a 20-year time frame[20] but it is present in much smaller concentrations so that its total direct radiative effect is smaller, in part due to its shorter atmospheric lifetime. On the other hand, in addition to its direct radiative impact, methane has a large, indirect radiative effect because it contributes to ozone formation. Shindell et al. (2005)[21] argue that the contribution to climate change from methane is at least double previous estimates as a result of this effect.[22]

When ranked by their direct contribution to the greenhouse effect, the most important are:[16]
Compound Formula Concentration in
atmosphere[23] (ppm)
Contribution
(%)
Water vapor and clouds H
2
O
10–50,000(A) 36–72%  
Carbon dioxide CO2 ~400 9–26%
Methane CH
4
~1.8 4–9%  
Ozone O
3
2–8(B) 3–7%  
notes:
(A) Water vapor strongly varies locally[24]
(B) The concentration in stratosphere. About 90% of the ozone in Earth's atmosphere is contained in the stratosphere.

In addition to the main greenhouse gases listed above, other greenhouse gases include sulfur hexafluoride, hydrofluorocarbons and perfluorocarbons (see IPCC list of greenhouse gases). Some greenhouse gases are not often listed. For example, nitrogen trifluoride has a high global warming potential (GWP) but is only present in very small quantities.[25]

Proportion of direct effects at a given moment

It is not possible to state that a certain gas causes an exact percentage of the greenhouse effect. This is because some of the gases absorb and emit radiation at the same frequencies as others, so that the total greenhouse effect is not simply the sum of the influence of each gas. The higher ends of the ranges quoted are for each gas alone; the lower ends account for overlaps with the other gases.[16][17]
In addition, some gases such as methane are known to have large indirect effects that are still being quantified.[26]

Atmospheric lifetime

Aside from water vapor, which has a residence time of about nine days,[27] major greenhouse gases are well mixed and take many years to leave the atmosphere.[28] Although it is not easy to know with precision how long it takes greenhouse gases to leave the atmosphere, there are estimates for the principal greenhouse gases. Jacob (1999)[29] defines the lifetime \tau of an atmospheric species X in a one-box model as the average time that a molecule of X remains in the box. Mathematically \tau can be defined as the ratio of the mass m (in kg) of X in the box to its removal rate, which is the sum of the flow of X out of the box (F_{out}), chemical loss of X (L), and deposition of X (D) (all in kg/s): \tau = \frac{m}{F_{out}+L+D}.[29] If one stopped pouring any of this gas into the box, then after a time \tau, its concentration would be about halved.

The atmospheric lifetime of a species therefore measures the time required to restore equilibrium following a sudden increase or decrease in its concentration in the atmosphere. Individual atoms or molecules may be lost or deposited to sinks such as the soil, the oceans and other waters, or vegetation and other biological systems, reducing the excess to background concentrations. The average time taken to achieve this is the mean lifetime.

Carbon dioxide has a variable atmospheric lifetime, and cannot be specified precisely.[30] The atmospheric lifetime of CO2 is estimated of the order of 30–95 years.[31] This figure accounts for CO2 molecules being removed from the atmosphere by mixing into the ocean, photosynthesis, and other processes. However, this excludes the balancing fluxes of CO2 into the atmosphere from the geological reservoirs, which have slower characteristic rates.[32] Although more than half of the CO2 emitted is removed from the atmosphere within a century, some fraction (about 20%) of emitted CO2 remains in the atmosphere for many thousands of years.[33] [34] [35] Similar issues apply to other greenhouse gases, many of which have longer mean lifetimes than CO2. E.g., N2O has a mean atmospheric lifetime of 114 years.[20]

Radiative forcing

Earth absorbs some of the radiant energy received from the sun, reflects some of it as light and reflects or radiates the rest back to space as heat.[36] Earth's surface temperature depends on this balance between incoming and outgoing energy.[36] If this energy balance is shifted, Earth's surface could become warmer or cooler, leading to a variety of changes in global climate.[36]

A number of natural and man-made mechanisms can affect the global energy balance and force changes in Earth's climate.[36] Greenhouse gases are one such mechanism.[36] Greenhouse gases in the atmosphere absorb and re-emit some of the outgoing energy radiated from Earth's surface, causing that heat to be retained in the lower atmosphere.[36] As explained above, some greenhouse gases remain in the atmosphere for decades or even centuries, and therefore can affect Earth's energy balance over a long time period.[36] Factors that influence Earth's energy balance can be quantified in terms of "radiative climate forcing."[36] Positive radiative forcing indicates warming (for example, by increasing incoming energy or decreasing the amount of energy that escapes to space), whereas negative forcing is associated with cooling.[36]

Global warming potential

The global warming potential (GWP) depends on both the efficiency of the molecule as a greenhouse gas and its atmospheric lifetime. GWP is measured relative to the same mass of CO2 and evaluated for a specific timescale. Thus, if a gas has a high (positive) radiative forcing but also a short lifetime, it will have a large GWP on a 20-year scale but a small one on a 100-year scale. Conversely, if a molecule has a longer atmospheric lifetime than CO2 its GWP will increase with the timescale considered. Carbon dioxide is defined to have a GWP of 1 over all time periods.

Methane has an atmospheric lifetime of 12 ± 3 years. The 2007 IPCC report lists the GWP as 72 over a time scale of 20 years, 25 over 100 years and 7.6 over 500 years.[20] A 2014 analysis, however, states that although methane's initial impact is about 100 times greater than that of CO2, because of the shorter atmospheric lifetime, after six or seven decades, the impact of the two gases is about equal, and from then on methane's relative role continues to decline.[37] The decrease in GWP at longer times is because methane is degraded to water and CO2 through chemical reactions in the atmosphere.

Examples of the atmospheric lifetime and GWP relative to CO2 for several greenhouse gases are given in the following table:[20]
 
Atmospheric lifetime and GWP relative to CO2 at different time horizon for various greenhouse gases.
Gas name Chemical
formula
Lifetime
(years)
Global warming potential (GWP) for given time horizon
20-yr 100-yr 500-yr
Carbon dioxide CO2 30–95 1 1 1
Methane CH
4
12 72 25 7.6
Nitrous oxide N
2
O
114 289 298 153
CFC-12 CCl
2
F
2
100 11 000 10 900 5 200
HCFC-22 CHClF
2
12 5 160 1 810 549
Tetrafluoromethane CF
4
50 000 5 210 7 390 11 200
Hexafluoroethane C
2
F
6
10 000 8 630 12 200 18 200
Sulfur hexafluoride SF
6
3 200 16 300 22 800 32 600
Nitrogen trifluoride NF
3
740 12 300 17 200 20 700
The use of CFC-12 (except some essential uses) has been phased out due to its ozone depleting properties.[38] The phasing-out of less active HCFC-compounds will be completed in 2030.[39]
Carbon dioxide in Earth's atmosphere if half of global-warming emissions[40][41] are not absorbed.
(NASA simulation; 9 November 2015)
Nitrogen dioxide 2014 – global air quality levels
(released 14 December 2015).[42]

Natural and anthropogenic sources

refer to caption and article text
Top: Increasing atmospheric carbon dioxide levels as measured in the atmosphere and reflected in ice cores. Bottom: The amount of net carbon increase in the atmosphere, compared to carbon emissions from burning fossil fuel.
refer to caption and image description
This diagram shows a simplified representation of the contemporary global carbon cycle. Changes are measured in gigatons of carbon per year (GtC/y). Canadell et al. (2007) estimated the growth rate of global average atmospheric CO2 for 2000–2006 as 1.93 parts-per-million per year (4.1 petagrams of carbon per year).[43]

Aside from purely human-produced synthetic halocarbons, most greenhouse gases have both natural and human-caused sources. During the pre-industrial Holocene, concentrations of existing gases were roughly constant. In the industrial era, human activities have added greenhouse gases to the atmosphere, mainly through the burning of fossil fuels and clearing of forests.[44][45]

The 2007 Fourth Assessment Report compiled by the IPCC (AR4) noted that "changes in atmospheric concentrations of greenhouse gases and aerosols, land cover and solar radiation alter the energy balance of the climate system", and concluded that "increases in anthropogenic greenhouse gas concentrations is very likely to have caused most of the increases in global average temperatures since the mid-20th century".[46] In AR4, "most of" is defined as more than 50%.

Abbreviations used in the two tables below: ppm = parts-per-million; ppb = parts-per-billion; ppt = parts-per-trillion; W/m2 = watts per square metre

Current greenhouse gas concentrations[5]
Gas Pre-1750
tropospheric
concentration[47]
Recent
tropospheric
concentration[48]
Absolute increase
since 1750
Percentage
increase
since 1750
Increased
radiative forcing
(W/m2)[49]
Carbon dioxide (CO2) 280 ppm[50] 395.4 ppm[51] 115.4 ppm 41.2% 1.88
Methane (CH
4
)
700 ppb[52] 1893 ppb /[53]
1762 ppb[53]
1193 ppb /
1062 ppb
170.4% /
151.7%
0.49
Nitrous oxide (N
2
O
)
270 ppb[49][54] 326 ppb /[53]
324 ppb[53]
56 ppb /
54 ppb
20.7% /
20.0%
0.17
Tropospheric
ozone (O
3
)
237 ppb[47] 337 ppb[47] 100 ppb 42% 0.4[55]
Relevant to radiative forcing and/or ozone depletion; all of the following have no natural sources and hence zero amounts pre-industrial[5]
Gas Recent
tropospheric
concentration
Increased
radiative forcing
(W/m2)
CFC-11
(trichlorofluoromethane)
(CCl
3
F
)
236 ppt /
234 ppt
0.061
CFC-12 (CCl
2
F
2
)
527 ppt /
527 ppt
0.169
CFC-113 (Cl
2
FC-CClF
2
)
74 ppt /
74 ppt
0.022
HCFC-22 (CHClF
2
)
231 ppt /
210 ppt
0.046
HCFC-141b (CH
3
CCl
2
F
)
24 ppt /
21 ppt
0.0036
HCFC-142b (CH
3
CClF
2
)
23 ppt /
21 ppt
0.0042
Halon 1211 (CBrClF
2
)
4.1 ppt /
4.0 ppt
0.0012
Halon 1301 (CBrClF
3
)
3.3 ppt /
3.3 ppt
0.001
HFC-134a (CH
2
FCF
3
)
75 ppt /
64 ppt
0.0108
Carbon tetrachloride (CCl
4
)
85 ppt /
83 ppt
0.0143
Sulfur hexafluoride (SF
6
)
7.79 ppt /[56]
7.39 ppt[56]
0.0043
Other halocarbons Varies by
substance
collectively
0.02
Halocarbons in total 0.3574
refer to caption and article text
400,000 years of ice core data

Ice cores provide evidence for greenhouse gas concentration variations over the past 800,000 years (see the following section). Both CO2 and CH
4
vary between glacial and interglacial phases, and concentrations of these gases correlate strongly with temperature. Direct data does not exist for periods earlier than those represented in the ice core record, a record that indicates CO2 mole fractions stayed within a range of 180 ppm to 280 ppm throughout the last 800,000 years, until the increase of the last 250 years. However, various proxies and modeling suggests larger variations in past epochs; 500 million years ago CO2 levels were likely 10 times higher than now.[57] Indeed, higher CO2 concentrations are thought to have prevailed throughout most of the Phanerozoic eon, with concentrations four to six times current concentrations during the Mesozoic era, and ten to fifteen times current concentrations during the early Palaeozoic era until the middle of the Devonian period, about 400 Ma.[58][59][60] The spread of land plants is thought to have reduced CO2 concentrations during the late Devonian, and plant activities as both sources and sinks of CO2 have since been important in providing stabilising feedbacks.[61] Earlier still, a 200-million year period of intermittent, widespread glaciation extending close to the equator (Snowball Earth) appears to have been ended suddenly, about 550 Ma, by a colossal volcanic outgassing that raised the CO2 concentration of the atmosphere abruptly to 12%, about 350 times modern levels, causing extreme greenhouse conditions and carbonate deposition as limestone at the rate of about 1 mm per day.[62] This episode marked the close of the Precambrian eon, and was succeeded by the generally warmer conditions of the Phanerozoic, during which multicellular animal and plant life evolved. No volcanic carbon dioxide emission of comparable scale has occurred since. In the modern era, emissions to the atmosphere from volcanoes are only about 1% of emissions from human sources.[62][63][64]

Ice cores

Measurements from Antarctic ice cores show that before industrial emissions started atmospheric CO2 mole fractions were about 280 parts per million (ppm), and stayed between 260 and 280 during the preceding ten thousand years.[65] Carbon dioxide mole fractions in the atmosphere have gone up by approximately 35 percent since the 1900s, rising from 280 parts per million by volume to 387 parts per million in 2009. One study using evidence from stomata of fossilized leaves suggests greater variability, with carbon dioxide mole fractions above 300 ppm during the period seven to ten thousand years ago,[66] though others have argued that these findings more likely reflect calibration or contamination problems rather than actual CO2 variability.[67][68] Because of the way air is trapped in ice (pores in the ice close off slowly to form bubbles deep within the firn) and the time period represented in each ice sample analyzed, these figures represent averages of atmospheric concentrations of up to a few centuries rather than annual or decadal levels.

Changes since the Industrial Revolution

Refer to caption
Recent year-to-year increase of atmospheric CO2.
Refer to caption
Major greenhouse gas trends.

Since the beginning of the Industrial Revolution, the concentrations of most of the greenhouse gases have increased. For example, the mole fraction of carbon dioxide has increased from 280 ppm by about 36% to 380 ppm, or 100 ppm over modern pre-industrial levels. The first 50 ppm increase took place in about 200 years, from the start of the Industrial Revolution to around 1973.[citation needed]; however the next 50 ppm increase took place in about 33 years, from 1973 to 2006.[69]

Recent data also shows that the concentration is increasing at a higher rate. In the 1960s, the average annual increase was only 37% of what it was in 2000 through 2007.[70]
Today, the stock of carbon in the atmosphere increases by more than 3 million tonnes per annum (0.04%) compared with the existing stock.[clarification needed] This increase is the result of human activities by burning fossil fuels, deforestation and forest degradation in tropical and boreal regions.[71]

The other greenhouse gases produced from human activity show similar increases in both amount and rate of increase. Many observations are available online in a variety of Atmospheric Chemistry Observational Databases.

Anthropogenic greenhouse gases

This graph shows changes in the annual greenhouse gas index (AGGI) between 1979 and 2011. [72] The AGGI measures the levels of greenhouse gases in the atmosphere based on their ability to cause changes in Earth's climate.[72]
This bar graph shows global greenhouse gas emissions by sector from 1990 to 2005, measured in carbon dioxide equivalents.[73]
Modern global CO2 emissions from the burning of fossil fuels.

Since about 1750 human activity has increased the concentration of carbon dioxide and other greenhouse gases. Measured atmospheric concentrations of carbon dioxide are currently 100 ppm higher than pre-industrial levels.[74] Natural sources of carbon dioxide are more than 20 times greater than sources due to human activity,[75] but over periods longer than a few years natural sources are closely balanced by natural sinks, mainly photosynthesis of carbon compounds by plants and marine plankton. As a result of this balance, the atmospheric mole fraction of carbon dioxide remained between 260 and 280 parts per million for the 10,000 years between the end of the last glacial maximum and the start of the industrial era.[76]

It is likely that anthropogenic (i.e., human-induced) warming, such as that due to elevated greenhouse gas levels, has had a discernible influence on many physical and biological systems.[77] Future warming is projected to have a range of impacts, including sea level rise,[78] increased frequencies and severities of some extreme weather events,[78] loss of biodiversity,[79] and regional changes in agricultural productivity.[79]

The main sources of greenhouse gases due to human activity are:
  • burning of fossil fuels and deforestation leading to higher carbon dioxide concentrations in the air. Land use change (mainly deforestation in the tropics) account for up to one third of total anthropogenic CO2 emissions.[76]
  • livestock enteric fermentation and manure management,[80] paddy rice farming, land use and wetland changes, pipeline losses, and covered vented landfill emissions leading to higher methane atmospheric concentrations. Many of the newer style fully vented septic systems that enhance and target the fermentation process also are sources of atmospheric methane.
  • use of chlorofluorocarbons (CFCs) in refrigeration systems, and use of CFCs and halons in fire suppression systems and manufacturing processes.
  • agricultural activities, including the use of fertilizers, that lead to higher nitrous oxide (N
    2
    O
    ) concentrations.
The seven sources of CO2 from fossil fuel combustion are (with percentage contributions for 2000–2004):[81]

Seven main fossil fuel
combustion sources
Contribution
(%)
Liquid fuels (e.g., gasoline, fuel oil) 36%
Solid fuels (e.g., coal) 35%
Gaseous fuels (e.g., natural gas) 20%
Cement production  3 %
Flaring gas industrially and at wells < 1%  
Non-fuel hydrocarbons < 1%  
"International bunker fuels" of transport
not included in national inventories[82]
 4 %
Carbon dioxide, methane, nitrous oxide (N
2
O
) and three groups of fluorinated gases (sulfur hexafluoride (SF
6
), hydrofluorocarbons (HFCs), and perfluorocarbons (PFCs)) are the major anthropogenic greenhouse gases,[83]:147[84] and are regulated under the Kyoto Protocol international treaty, which came into force in 2005.[85] Emissions limitations specified in the Kyoto Protocol expired in 2012.[85] The Cancún agreement, agreed in 2010, includes voluntary pledges made by 76 countries to control emissions.[86] At the time of the agreement, these 76 countries were collectively responsible for 85% of annual global emissions.[86]

Although CFCs are greenhouse gases, they are regulated by the Montreal Protocol, which was motivated by CFCs' contribution to ozone depletion rather than by their contribution to global warming. Note that ozone depletion has only a minor role in greenhouse warming though the two processes often are confused in the media.

Tourism[edit]

According to UNEP global tourism is closely linked to climate change. Tourism is a significant contributor to the increasing concentrations of greenhouse gases in the atmosphere. Tourism accounts for about 50% of traffic movements. Rapidly expanding air traffic contributes about 2.5% of the production of CO2. The number of international travelers is expected to increase from 594 million in 1996 to 1.6 billion by 2020, adding greatly to the problem unless steps are taken to reduce emissions.[87]

Road Haulage

The road haulage industry plays a part in production of CO2, contributing around 20% of the UK’s total carbon emissions a year, with only the energy industry having a larger impact at around 39%.[88] Average carbon emissions within the haulage industry are falling—in the thirty-year period from 1977–2007, the carbon emissions associated with a 200-mile journey fell by 21 percent; NOx emissions are also down 87 percent, whereas journey times have fallen by around a third.[89] Due to their size, HGVs often receive criticism regarding their CO2 emissions; however, rapid development in engine technology and fuel management is having a largely positive effect.

Role of water vapor


Increasing water vapor in the stratosphere at Boulder, Colorado.

Water vapor accounts for the largest percentage of the greenhouse effect, between 36% and 66% for clear sky conditions and between 66% and 85% when including clouds.[17] Water vapor concentrations fluctuate regionally, but human activity does not significantly affect water vapor concentrations except at local scales, such as near irrigated fields. The atmospheric concentration of vapor is highly variable and depends largely on temperature, from less than 0.01% in extremely cold regions up to 3% by mass at in saturated air at about 32 °C.[90] (See Relative humidity#other important facts.)

The average residence time of a water molecule in the atmosphere is only about nine days, compared to years or centuries for other greenhouse gases such as CH
4
and CO2.[91] Thus, water vapor responds to and amplifies effects of the other greenhouse gases. The Clausius–Clapeyron relation establishes that more water vapor will be present per unit volume at elevated temperatures. This and other basic principles indicate that warming associated with increased concentrations of the other greenhouse gases also will increase the concentration of water vapor (assuming that the relative humidity remains approximately constant; modeling and observational studies find that this is indeed so). Because water vapor is a greenhouse gas, this results in further warming and so is a "positive feedback" that amplifies the original warming. Eventually other earth processes offset these positive feedbacks, stabilizing the global temperature at a new equilibrium and preventing the loss of Earth's water through a Venus-like runaway greenhouse effect.[92]

Direct greenhouse gas emissions

Between the period 1970 to 2004, GHG emissions (measured in CO2-equivalent)[93] increased at an average rate of 1.6% per year, with CO2 emissions from the use of fossil fuels growing at a rate of 1.9% per year.[94][95] Total anthropogenic emissions at the end of 2009 were estimated at 49.5 gigatonnes CO2-equivalent.[96]:15 These emissions include CO2 from fossil fuel use and from land use, as well as emissions of methane, nitrous oxide and other GHGs covered by the Kyoto Protocol.
At present, the primary source of CO2 emissions is the burning of coal, natural gas, and petroleum for electricity and heat.[97]

Regional and national attribution of emissions

This figure shows the relative fraction of anthropogenic greenhouse gases coming from each of eight categories of sources, as estimated by the Emission Database for Global Atmospheric Research version 3.2, fast track 2000 project [1]. These values are intended to provide a snapshot of global annual greenhouse gas emissions in the year 2000. The top panel shows the sum over all anthropogenic greenhouse gases, weighted by their global warming potential over the next 100 years. This consists of 72% carbon dioxide, 18% methane, 8% nitrous oxide and 1% other gases. Lower panels show the comparable information for each of these three primary greenhouse gases, with the same coloring of sectors as used in the top chart. Segments with less than 1% fraction are not labeled.

There are several different ways of measuring GHG emissions, for example, see World Bank (2010)[98]:362 for tables of national emissions data. Some variables that have been reported[99] include:
  • Definition of measurement boundaries: Emissions can be attributed geographically, to the area where they were emitted (the territory principle) or by the activity principle to the territory produced the emissions. These two principles result in different totals when measuring, for example, electricity importation from one country to another, or emissions at an international airport.
  • Time horizon of different GHGs: Contribution of a given GHG is reported as a CO2 equivalent. The calculation to determine this takes into account how long that gas remains in the atmosphere. This is not always known accurately and calculations must be regularly updated to reflect new information.
  • What sectors are included in the calculation (e.g., energy industries, industrial processes, agriculture etc.): There is often a conflict between transparency and availability of data.
  • The measurement protocol itself: This may be via direct measurement or estimation. The four main methods are the emission factor-based method, mass balance method, predictive emissions monitoring systems, and continuous emissions monitoring systems. These methods differ in accuracy, cost, and usability.
These different measures are sometimes used by different countries to assert various policy/ethical positions on climate change (Banuri et al., 1996, p. 94).[100] This use of different measures leads to a lack of comparability, which is problematic when monitoring progress towards targets. There are arguments for the adoption of a common measurement tool, or at least the development of communication between different tools.[99]

Emissions may be measured over long time periods. This measurement type is called historical or cumulative emissions. Cumulative emissions give some indication of who is responsible for the build-up in the atmospheric concentration of GHGs (IEA, 2007, p. 199).[101]

The national accounts balance would be positively related to carbon emissions. The national accounts balance shows the difference between exports and imports. For many richer nations, such as the United States, the accounts balance is negative because more goods are imported than they are exported. This is mostly due to the fact that it is cheaper to produce goods outside of developed countries, leading the economies of developed countries to become increasingly dependent on services and not goods. We believed that a positive accounts balance would means that more production was occurring in a country, so more factories working would increase carbon emission levels.(Holtz-Eakin, 1995, pp.;85;101).[102]

Emissions may also be measured across shorter time periods. Emissions changes may, for example, be measured against a base year of 1990. 1990 was used in the United Nations Framework Convention on Climate Change (UNFCCC) as the base year for emissions, and is also used in the Kyoto Protocol (some gases are also measured from the year 1995).[83]:146,149 A country's emissions may also be reported as a proportion of global emissions for a particular year.

Another measurement is of per capita emissions. This divides a country's total annual emissions by its mid-year population.[98]:370 Per capita emissions may be based on historical or annual emissions (Banuri et al., 1996, pp. 106–107).[100]

Land-use change

Refer to caption.
Greenhouse gas emissions from agriculture, forestry and other land use, 1970–2010.

Land-use change, e.g., the clearing of forests for agricultural use, can affect the concentration of GHGs in the atmosphere by altering how much carbon flows out of the atmosphere into carbon sinks.[103] Accounting for land-use change can be understood as an attempt to measure "net" emissions, i.e., gross emissions from all GHG sources minus the removal of emissions from the atmosphere by carbon sinks (Banuri et al., 1996, pp. 92–93).[100]

There are substantial uncertainties in the measurement of net carbon emissions.[104] Additionally, there is controversy over how carbon sinks should be allocated between different regions and over time (Banuri et al., 1996, p. 93).[100] For instance, concentrating on more recent changes in carbon sinks is likely to favour those regions that have deforested earlier, e.g., Europe.

Greenhouse gas intensity

Refer to caption.
Greenhouse gas intensity in the year 2000, including land-use change.
Refer to caption.
Carbon intensity of GDP (using PPP) for different regions, 1982–2011.
Refer to caption.
Carbon intensity of GDP (using MER) for different regions, 1982–2011.

Greenhouse gas intensity is a ratio between greenhouse gas emissions and another metric, e.g., gross domestic product (GDP) or energy use. The terms "carbon intensity" and "emissions intensity" are also sometimes used.[105] GHG intensities may be calculated using market exchange rates (MER) or purchasing power parity (PPP) (Banuri et al., 1996, p. 96).[100] Calculations based on MER show large differences in intensities between developed and developing countries, whereas calculations based on PPP show smaller differences.

Cumulative and historical emissions

Cumulative energy-related CO2 emissions between the years 1850–2005 grouped into low-income, middle-income, high-income, the EU-15, and the OECD countries.
Cumulative energy-related CO2 emissions between the years 1850–2005 for individual countries.
Map of cumulative per capita anthropogenic atmospheric CO2 emissions by country. Cumulative emissions include land use change, and are measured between the years 1950 and 2000.
Regional trends in annual CO2 emissions from fuel combustion between 1971 and 2009.
Regional trends in annual per capita CO2 emissions from fuel combustion between 1971 and 2009.

Cumulative anthropogenic (i.e., human-emitted) emissions of CO2 from fossil fuel use are a major cause of global warming,[106] and give some indication of which countries have contributed most to human-induced climate change.[107]:15

Top-5 historic CO2 contributors by region over the years 1800 to 1988 (in %)
Region Industrial
CO2
Total
CO2
OECD North America 33.2 29.7
OECD Europe 26.1 16.6
Former USSR 14.1 12.5
China   5.5   6.0
Eastern Europe   5.5   4.8

The table above to the left is based on Banuri et al. (1996, p. 94).[100] Overall, developed countries accounted for 83.8% of industrial CO2 emissions over this time period, and 67.8% of total CO2 emissions. Developing countries accounted for industrial CO2 emissions of 16.2% over this time period, and 32.2% of total CO2 emissions. The estimate of total CO2 emissions includes biotic carbon emissions, mainly from deforestation. Banuri et al. (1996, p. 94)[100] calculated per capita cumulative emissions based on then-current population. The ratio in per capita emissions between industrialized countries and developing countries was estimated at more than 10 to 1.

Including biotic emissions brings about the same controversy mentioned earlier regarding carbon sinks and land-use change (Banuri et al., 1996, pp. 93–94).[100] The actual calculation of net emissions is very complex, and is affected by how carbon sinks are allocated between regions and the dynamics of the climate system.

Non-OECD countries accounted for 42% of cumulative energy-related CO2 emissions between 1890–2007.[108]:179–180 Over this time period, the US accounted for 28% of emissions; the EU, 23%; Russia, 11%; China, 9%; other OECD countries, 5%; Japan, 4%; India, 3%; and the rest of the world, 18%.[108]:179–180

Changes since a particular base year

Between 1970–2004, global growth in annual CO2 emissions was driven by North America, Asia, and the Middle East.[109] The sharp acceleration in CO2 emissions since 2000 to more than a 3% increase per year (more than 2 ppm per year) from 1.1% per year during the 1990s is attributable to the lapse of formerly declining trends in carbon intensity of both developing and developed nations. 
China was responsible for most of global growth in emissions during this period. Localised plummeting emissions associated with the collapse of the Soviet Union have been followed by slow emissions growth in this region due to more efficient energy use, made necessary by the increasing proportion of it that is exported.[81] In comparison, methane has not increased appreciably, and N
2O by 0.25% y−1.
Using different base years for measuring emissions has an effect on estimates of national contributions to global warming.[107]:17–18[110] This can be calculated by dividing a country's highest contribution to global warming starting from a particular base year, by that country's minimum contribution to global warming starting from a particular base year. Choosing between different base years of 1750, 1900, 1950, and 1990 has a significant effect for most countries.[107]:17–18 Within the G8 group of countries, it is most significant for the UK, France and Germany. These countries have a long history of CO2 emissions (see the section on Cumulative and historical emissions).

Annual emissions[edit]


Per capita anthropogenic greenhouse gas emissions by country for the year 2000 including land-use change.
Annual per capita emissions in the industrialized countries are typically as much as ten times the average in developing countries.[83]:144 Due to China's fast economic development, its annual per capita emissions are quickly approaching the levels of those in the Annex I group of the Kyoto Protocol (i.e., the developed countries excluding the USA).[111] Other countries with fast growing emissions are South Korea, Iran, and Australia (which apart from the oil rich Persian Gulf states, now has the highest percapita emission rate in the world). On the other hand, annual per capita emissions of the EU-15 and the USA are gradually decreasing over time.[111] Emissions in Russia and the Ukraine have decreased fastest since 1990 due to economic restructuring in these countries.[112]
Energy statistics for fast growing economies are less accurate than those for the industrialized countries. For China's annual emissions in 2008, the Netherlands Environmental Assessment Agency estimated an uncertainty range of about 10%.[111]
The GHG footprint, or greenhouse gas footprint, refers to the amount of GHG that are emitted during the creation of products or services. It is more comprehensive than the commonly used carbon footprint, which measures only carbon dioxide, one of many greenhouse gases.

Top emitter countries[edit]


The top 40 countries emitting all greenhouse gases, showing both that derived from all sources including land clearance and forestry and also the CO2 component excluding those sources. Per capita figures are included. Data taken from World Resources Institute, Washington. Note that Indonesia and Brazil show very much higher than on graphs simply showing fossil fuel use.

Annual[edit]

In 2009, the annual top ten emitting countries accounted for about two-thirds of the world's annual energy-related CO2 emissions.[113]
Top-10 annual energy-related CO2 emitters for the year 2009[citation needed]
Country  % of global total
annual emissions
Tonnes of GHG
per capita
People's Rep. of China 23.6 5.13
United States 17.9 16.9
India 5.5 1.37
Russian Federation 5.3 10.8
Japan 3.8 8.6
Germany 2.6 9.2
Islamic Rep. of Iran 1.8 7.3
Canada 1.8 15.4
Korea 1.8 10.6
United Kingdom 1.6 7.5

Cumulative[edit]

The C-Story of Human Civilization by PIK
Top-10 cumulative energy-related CO2 emitters between 1850–2008[citation needed]
Country  % of world
total
Metric tonnes
CO2 per person
United States 28.5 1,132.7
China 9.36 85.4
Russian Federation 7.95 677.2
Germany 6.78 998.9
United Kingdom 5.73 1,127.8
Japan 3.88 367
France 2.73 514.9
India 2.52 26.7
Canada 2.17 789.2
Ukraine 2.13 556.4

Embedded emissions

One way of attributing greenhouse gas (GHG) emissions is to measure the embedded emissions (also referred to as "embodied emissions") of goods that are being consumed. Emissions are usually measured according to production, rather than consumption.[114] For example, in the main international treaty on climate change (the UNFCCC), countries report on emissions produced within their borders, e.g., the emissions produced from burning fossil fuels.[108]:179[115]:1 Under a production-based accounting of emissions, embedded emissions on imported goods are attributed to the exporting, rather than the importing, country. Under a consumption-based accounting of emissions, embedded emissions on imported goods are attributed to the importing country, rather than the exporting, country.

Davis and Caldeira (2010)[115]:4 found that a substantial proportion of CO2 emissions are traded
internationally. The net effect of trade was to export emissions from China and other emerging markets to consumers in the US, Japan, and Western Europe. Based on annual emissions data from the year 2004, and on a per-capita consumption basis, the top-5 emitting countries were found to be (in tCO2 per person, per year): Luxembourg (34.7), the US (22.0), Singapore (20.2), Australia (16.7), and Canada (16.6).[115]:5 Carbon Trust research revealed that approximately 25% of all CO2 emissions from human activities 'flow' (i.e. are imported or exported) from one country to another. Major developed economies were found to be typically net importers of embodied carbon emissions — with UK consumption emissions 34% higher than production emissions, and Germany (29%), Japan (19%) and the USA (13%) also significant net importers of embodied emissions.[116]

Effect of policy

Governments have taken action to reduce GHG emissions (climate change mitigation). Assessments of policy effectiveness have included work by the Intergovernmental Panel on Climate Change,[117] International Energy Agency,[118][119] and United Nations Environment Programme.[120] Policies implemented by governments have included[121][122][123] national and regional targets to reduce emissions, promoting energy efficiency, and support for renewable energy such as Solar energy as an effective use of renewable energy because solar uses energy from the sun and does not release pollutants into the air.
Countries and regions listed in Annex I of the United Nations Framework Convention on Climate Change (UNFCCC) (i.e., the OECD and former planned economies of the Soviet Union) are required to submit periodic assessments to the UNFCCC of actions they are taking to address climate change.[123]:3 Analysis by the UNFCCC (2011)[123]:8 suggested that policies and measures undertaken by Annex I Parties may have produced emission savings of 1.5 thousand Tg CO2-eq in the year 2010, with most savings made in the energy sector. The projected emissions saving of 1.5 thousand Tg CO2-eq is measured against a hypothetical "baseline" of Annex I emissions, i.e., projected Annex I emissions in the absence of policies and measures. The total projected Annex I saving of 1.5 thousand CO2-eq does not include emissions savings in seven of the Annex I Parties.[123]:8

Projections

A wide range of projections of future GHG emissions have been produced.[124] Rogner et al. (2007)[125] assessed the scientific literature on GHG projections. Rogner et al. (2007)[94] concluded that unless energy policies changed substantially, the world would continue to depend on fossil fuels until 2025–2030. Projections suggest that more than 80% of the world's energy will come from fossil fuels. This conclusion was based on "much evidence" and "high agreement" in the literature.[94] Projected annual energy-related CO2 emissions in 2030 were 40–110% higher than in 2000, with two-thirds of the increase originating in developing countries.[94] Projected annual per capita emissions in developed country regions remained substantially lower (2.8–5.1 tonnes CO2) than those in developed country regions (9.6–15.1 tonnes CO2).[126] Projections consistently showed increase in annual world GHG emissions (the "Kyoto" gases,[127] measured in CO2-equivalent) of 25–90% by 2030, compared to 2000.[94]

Relative CO2 emission from various fuels

One liter of gasoline, when used as a fuel, produces 2.32 kg (about 1300 liters or 1.3 cubic meters) of carbon dioxide, a greenhouse gas. One US gallon produces 19.4 lb (1,291.5 gallons or 172.65 cubic feet)[128][129][130]
 
Mass of carbon dioxide emitted per quantity of energy for various fuels[131]
Fuel name CO2
emitted
(lbs/106 Btu)
CO2
emitted
(g/MJ)
Natural gas 117 50.30
Liquefied petroleum gas 139 59.76
Propane 139 59.76
Aviation gasoline 153 65.78
Automobile gasoline 156 67.07
Kerosene 159 68.36
Fuel oil 161 69.22
Tires/tire derived fuel 189 81.26
Wood and wood waste 195 83.83
Coal (bituminous) 205 88.13
Coal (sub-bituminous) 213 91.57
Coal (lignite) 215 92.43
Petroleum coke 225 96.73
Tar-sand Bitumen [citation needed] [citation needed]
Coal (anthracite) 227 97.59

Life-cycle greenhouse-gas emissions of energy sources

A literature review of numerous energy sources CO2 emissions by the IPCC in 2011, found that, the CO2 emission value that fell within the 50th percentile of all total life cycle emissions studies conducted was as follows.[132]
 
Lifecycle greenhouse gas emissions by electricity source.
Technology Description 50th percentile
(g CO2/kWhe)
Hydroelectric reservoir 4
Ocean Energy wave and tidal 8
Wind onshore 12
Nuclear various generation II reactor types 16
Biomass various 18
Solar thermal parabolic trough 22
Geothermal hot dry rock 45
Solar PV Polycrystalline silicon 46
Natural gas various combined cycle turbines without scrubbing 469
Coal various generator types without scrubbing 1001

Removal from the atmosphere ("sinks")

Natural processes

Greenhouse gases can be removed from the atmosphere by various processes, as a consequence of:
  • a physical change (condensation and precipitation remove water vapor from the atmosphere).
  • a chemical reaction within the atmosphere. For example, methane is oxidized by reaction with naturally occurring hydroxyl radical, OH· and degraded to CO2 and water vapor (CO2 from the oxidation of methane is not included in the methane Global warming potential). Other chemical reactions include solution and solid phase chemistry occurring in atmospheric aerosols.
  • a physical exchange between the atmosphere and the other compartments of the planet. An example is the mixing of atmospheric gases into the oceans.
  • a chemical change at the interface between the atmosphere and the other compartments of the planet. This is the case for CO2, which is reduced by photosynthesis of plants, and which, after dissolving in the oceans, reacts to form carbonic acid and bicarbonate and carbonate ions (see ocean acidification).
  • a photochemical change. Halocarbons are dissociated by UV light releasing Cl· and F· as free radicals in the stratosphere with harmful effects on ozone (halocarbons are generally too stable to disappear by chemical reaction in the atmosphere).

Negative emissions

A number of technologies remove greenhouse gases emissions from the atmosphere. Most widely analysed are those that remove carbon dioxide from the atmosphere, either to geologic formations such as bio-energy with carbon capture and storage[133][134][135] and carbon dioxide air capture,[135] or to the soil as in the case with biochar.[135] The IPCC has pointed out that many long-term climate scenario models require large scale manmade negative emissions to avoid serious climate change.[136]

History of scientific research

In the late 19th century scientists experimentally discovered that N
2
and O
2
do not absorb infrared radiation (called, at that time, "dark radiation"), while water (both as true vapor and condensed in the form of microscopic droplets suspended in clouds) and CO2 and other poly-atomic gaseous molecules do absorb infrared radiation. In the early 20th century researchers realized that greenhouse gases in the atmosphere made Earth's overall temperature higher than it would be without them. During the late 20th century, a scientific consensus evolved that increasing concentrations of greenhouse gases in the atmosphere cause a substantial rise in global temperatures and changes to other parts of the climate system,[137] with consequences for the environment and for human health.

Operator (computer programming)

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Operator_(computer_programmin...