A Medley of Potpourri

Friday, August 11, 2023

Superalloy

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Superalloy

A superalloy, or high-performance alloy, is an alloy with the ability to operate at a high fraction of its melting point. Key characteristics of a superalloy include mechanical strength, thermal creep deformation resistance, surface stability, and corrosion and oxidation resistance.

The crystal structure is typically face-centered cubic (FCC) austenitic. Examples of such alloys are Hastelloy, Inconel, Waspaloy, Rene alloys, Incoloy, MP98T, TMS alloys, and CMSX single crystal alloys.

Superalloy development relies on chemical and process innovations. Superalloys develop high temperature strength through solid solution strengthening and precipitation strengthening from secondary phase precipitates such as gamma prime and carbides. Oxidation or corrosion resistance is provided by elements such as aluminium and chromium. Superalloys are often cast as a single crystal—while grain boundaries may provide strength at low temperatures, they decrease creep resistance.

The primary application for such alloys is in aerospace and marine turbine engines. Creep is typically the lifetime-limiting factor in gas turbine blades.

Superalloys have made much of very-high-temperature engineering technology possible.

Chemical development

Because these alloys are intended for high temperature applications their creep and oxidation resistance are of primary importance. Nickel (Ni)-based superalloys are the material of choice for these applications because of their unique γ' precipitates. The properties of these superalloys can be tailored to a certain extent through the addition of various other elements, common or exotic, including not only metals, but also metalloids and nonmetals; chromium, iron, cobalt, molybdenum, tungsten, tantalum, aluminium, titanium, zirconium, niobium, rhenium, yttrium, vanadium, carbon, boron or hafnium are some examples of the alloying additions used. Each addition serves a particular purpose in optimizing properties.

Creep resistance is dependent, in part, on slowing the speed of dislocation motion within a crystal structure. In modern Ni-based superalloys, the γ’-Ni₃(Al,Ti) phase acts as a barrier to dislocation. For this reason, this γ’ intermetallic phase, when present in high volume fractions, increases the strength of these alloys due to its ordered nature and high coherency with the γ matrix. The chemical additions of aluminum and titanium promote the creation of the γ’ phase. The γ’ phase size can be precisely controlled by careful precipitation strengthening heat treatments. Many superalloys are produced using a two-phase heat treatment that creates a dispersion of cuboidal γ’ particles known as the primary phase, with a fine dispersion between these known as secondary γ’. In order to improve the oxidation resistance of these alloys, Al, Cr, B, and Y are added. The Al and Cr form oxide layers that passivate the surface and protect the superalloy from further oxidation while B and Y are used to improve the adhesion of this oxide scale to the substrate. Cr, Fe, Co, Mo and Re all preferentially partition to the γ matrix while Al, Ti, Nb, Ta, and V preferentially partition to the γ’ precipitates and solid solution strengthen the matrix and precipitates respectively. In addition to solid solution strengthening, if grain boundaries are present, certain elements are chosen for grain boundary strengthening. B and Zr tend to segregate to the grain boundaries which reduces the grain boundary energy and results in better grain boundary cohesion and ductility. Another form of grain boundary strengthening is achieved through the addition of C and a carbide former, such as Cr, Mo, W, Nb, Ta, Ti, or Hf, which drives precipitation of carbides at grain boundaries and thereby reduces grain boundary sliding.

Ni-based superalloy compositions
Element	Composition range (weight %)	Purpose
Ni, Fe, Co	50-70%	These elements form the base matrix γ phase of the superalloy. Ni is necessary because it also forms γ' (Ni₃Al). Fe and Co have higher melting points than Ni and offer solid solution strengthening. Fe is also much cheaper than Ni or Co.
Cr	5-20%	Cr is necessary for oxidation and corrosion resistance; it forms a protective oxide Cr₂O₃.
Al	0.5-6%	Al is the main γ' former. It also forms a protective oxide Al₂O₃, which provides oxidation resistance at higher temperature than Cr₂O₃.
Ti	1-4%	Ti forms γ'.
C	0.05-0.2%	MC and M₂₃C₆ (M ⁠= ⁠metal) carbides are the strengthening phase in the absence of γ'.
B,Zr	0-0.1%	Boron and zirconium provide strength to grain boundaries. This is not essential in single-crystal turbine blades, because there are no grain boundaries.
Nb	0-5%	Nb can form γ'', a strengthening phase at lower (below 700 °C) temperatures.
Re, W, Hf, Mo, Ta	1-10%	Refractory metals, added in small amounts for solid solution strengthening (and carbide formation). They are heavy, but have extremely high melting points.

Active research

Co-based superalloys potentially possess superior hot corrosion, oxidation, and wear resistance as compared to Ni-based superalloys. However, traditional Co-based superalloys have not found widespread application because they have lower strength at high temperature than Ni-based superalloys. The main reason for this is that they originally appeared to lack the γ’ precipitation strengthening found in Ni-based superalloys. A 2006 report on metastable γ’-Co₃(Al,W) intermetallic compound with the L1₂ structure suggested Co-based alloys. This class of alloys was first reported in C. S. Lee's 1971 PhD thesis. The two-phase microstructure consists of cuboidal γ’ precipitates embedded in a continuous γ matrix and is therefore morphologically identical to Ni-based superalloy's microstructure. It presents high coherency between the two phases, which is one of the main factors resulting in superior high temperature strength.

This provides a pathway for the development of a class of load-bearing Co-based superalloys for application in severe environments. In these alloys, W is the crucial addition for forming the γ’ intermetallic compound; this gives them greater density (>9.6 g/cm³⁾. A class of γ - γ’ cobalt-based superalloys that are W-free are of much lower density than nickel-based superalloys. Co has a higher melting temperature than Ni. Therefore, if the high temperature strength can be improved, Co-based superalloys could replace Ni-based in jet engines.

Phase formation

Adding elements is usually helpful because of solid solution strengthening, but can result in unwanted precipitation. Precipitates can be classified as geometrically close-packed (GCP), topologically close-packed (TCP), or carbides. GCP phases usually benefit mechanical properties, but TCP phases are often deleterious. Because TCP phases are not truly close packed, they have few slip systems and are brittle. Also they "scavenge" elements from GCP phases. Many elements that are good for forming γ' or have great solid solution strengthening may precipitate TCPs. The proper balance promotes GCPs while avoiding TCPs.

TCP phase formation areas are weak because they:

have inherently poor mechanical properties
are incoherent with the γ matrix
are surrounded by a "depletion zone" where there is no γ'
usually form sharp plate or needle-like morphologies which nucleate cracks

The main GCP phase is γ'. Almost all superalloys are Ni-based because of this phase. γ' is an ordered L1₂ (pronounced L-one-two), which means it has a certain atom on the face of the unit cell, and a certain atom on the corners of the unit cell. Ni-based superalloys usually present Ni on the faces and Ti or Al on the corners.

Another "good" GCP phase is γ''. It is also coherent with γ, but it dissolves at high temperatures.

Superalloy phases
Phase	Classification	Structure	Composition(s)	Appearance	Effect
γ	matrix	disordered FCC	Ni, Co, Fe and other elements in solid solution	The background for other precipitates	The matrix phase, provides ductility and a structure for precipitates
γ'	GCP	L1₂ (ordered FCC)	Ni₃(Al,Ti)	cubes, rounded cubes, spheres, or platelets (depending on lattice mismatch)	The main strengthening phase. γ' is coherent with γ, which allows for ductility.
Carbide	Carbide	FCC	mC, m₂₃C₆, and m₆C (m ⁠= ⁠metal)	string-like clumps, like strings of pearls	There are many carbides, but they all provide dispersion strengthening and grain boundary stabilization.
γ''	GCP	D0₂₂ (ordered BCT)	Ni₃Nb	very small disks	This precipitate is coherent with γ'. It is the main strengthening phase in IN-718, but γ'' dissolves at high temperatures.
η	GCP	D0₂₄ (ordered HCP)	Ni₃Ti	may form cellular or Widmanstätten patterns	The phase is not the worst, but it is not as good as γ'. It can be useful in controlling grain boundaries.
δ	not close-packed	orthorhombic	Ni₃Nb	acicular (needle-like)	The main issue with this phase is that it's not coherent with γ, but it is not inherently weak. It typically forms from decomposing γ'', but sometimes it's intentionally added in small amounts for grain boundary refinement.
σ	TCP	tetrahedral	FeCr, FeCrMo, CrCo	elongated globules	This TCP is usually considered to have the worst mechanical properties. It is never desirable for mechanical properties.
μ	TCP	hexagonal	Fe₂Nb, Co₂Ti, Fe₂Ti	globules or platelets	This phase has typical TCP issues. It is never desirable for mechanical properties.
Laves	TCP	rhombohedral	(Fe,Co)₇(Mo,W)₆	coarse Widmanstätten platelets	This phase has typical TCP issues. It is never desirable for mechanical properties.

Families of superalloys

Ni-based

History

The United States became interested in gas turbine development around 1905. From 1910-1915, austenitic ( γ phase) stainless steels were developed to survive high temperatures in gas turbines. By 1929, 80Ni-20Cr alloy was the norm, with small additions of Ti and Al. Although early metallurgists did not know it yet, they were forming small γ' precipitates in Ni-based superalloys. These alloys quickly surpassed Fe- and Co-based superalloys, which were strengthened by carbides and solid solution strengthening.

Although Cr was great for protecting the alloys from oxidation and corrosion up to 700 °C, metallurgists began decreasing Cr in favor of Al, which had oxidation resistance at much higher temperatures. The lack of Cr caused issues with hot corrosion, so coatings needed to be developed.

Around 1950, vacuum melting became commercialized, which allowed metallurgists to create higher purity alloys with more precise composition.

In the 60s and 70s, metallurgists changed focus from alloy chemistry to alloy processing. Directional solidification was developed to allow columnar or even single-crystal turbine blades. Oxide dispersion strengthening could obtain very fine grains and superplasticity.

Phases

Gamma (γ): This phase composes the matrix of Ni-based superalloy. It is a solid solution fcc austenitic phase of the alloying elements. The alloying elements most found in commercial Ni-based alloys are, C, Cr, Mo, W, Nb, Fe, Ti, Al, V, and Ta. During the formation of these materials, as they cool from the melt, carbides precipitate, at even lower temperatures γ' phase precipitates.
Gamma prime (γ'): This phase constitutes the precipitate used to strengthen the alloy. It is an intermetallic phase based on Ni₃(Ti,Al) which have an ordered FCC L1₂ structure. The γ' phase is coherent with the matrix of the superalloy having a lattice parameter that varies by around 0.5%. Ni₃(Ti,Al) are ordered systems with Ni atoms at the cube faces and either Al or Ti atoms at the cube edges. As particles of γ' precipitates aggregate, they decrease their energy states by aligning along the <100> directions forming cuboidal structures. This phase has a window of instability between 600 °C and 850 °C, inside of which γ' will transform into the HCP η phase. For applications at temperatures below 650 °C, the γ" phase can be utilized for strengthening.

Gamma double prime (γ"): This phase typically is Ni₃Nb or Ni₃V and is used to strengthen Ni-based superalloys at lower temperatures (<650 °C) relative to γ'. The crystal structure of γ" is body-centered tetragonal (BCT), and the phase precipitates as 60 nm by 10 nm discs with the (001) planes in γ" parallel to the {001} family in γ. These anisotropic discs form as a result of lattice mismatch between the BCT precipitate and the FCC matrix. This lattice mismatch leads to high coherency strains which, together with order hardening, are the primary strengthening mechanisms. The γ" phase is unstable above approximately 650 °C.
Carbide phases: Carbide formation is usually deleterious although in Ni-based superalloys they are used to stabilize the structure of the material against deformation at high temperatures. Carbides form at the grain boundaries, inhibiting grain boundary motion.
Topologically close-packed (TCP) phases: The term "TCP phase" refers to any member of a family of phases (including the σ phase, the χ phase, the μ phase, and the Laves phase), which are not atomically close-packed but possess some close-packed planes with HCP stacking. TCP phases tend to be highly brittle and deplete the γ matrix of strengthening, solid solution refractory elements (including Cr, Co, W, and Mo). These phases form as a result of kinetics after long periods of time (thousands of hours) at high temperatures (>750 °C).

Co-based

Co-based superalloys depend on carbide precipitation and solid solution strengthening for mechanical properties. While these strengthening mechanisms are inferior to gamma prime (γ') precipitation strengthening, cobalt has a higher melting point than nickel and has superior hot corrosion resistance and thermal fatigue. As a result, carbide-strengthened Co-based superalloys are used in lower stress, higher temperature applications such as stationary vanes in gas turbines.

Co's γ/γ' microstructure was rediscovered and published in 2006 by Sato et al. That γ' phase was Co₃(Al, W). Mo, Ti, Nb, V, and Ta partition to the γ' phase, while Fe, Mn, and Cr partition to the matrix γ.

The next family of Co-based superalloys was discovered in 2015 by Makineni et al. This family has a similar γ/γ' microstructure, but is W-free and has a γ' phase of Co₃(Al,Mo,Nb). Since W is heavy, its elimination makes Co-based alloys increasingly viable in turbines for aircraft, where low density is especially valued.

The most recently discovered family of superalloys was computationally predicted by Nyshadham et al. in 2017, and demonstrated by Reyes Tirado et al. in 2018. This γ' phase is W free and has the composition Co₃(Nb,V) and Co₃(Ta,V).

Phases

Gamma (γ): This is the matrix phase. While Co-based superalloys are less-used commercially, alloying elements include C, Cr, W, Ni, Ti, Al, Ir, and Ta. As in stainless steels, Chromium is used (occasionally up to 20 wt.%) to improve resistance to oxidation and corrosion via the formation of a Cr₂O₃ passive layer, which is critical for use in gas turbines, but also provides solid-solution strengthening due to the mismatch in the atomic radii of Co and Cr, and precipitation hardening due to the formation of MC-type carbides.
Gamma Prime (γ'): Constitutes the precipitate used to strengthen the alloy. It is usually close-packed with a L1₂ structure of Co₃Ti or FCC Co₃Ta, though both W and Al integrate into these cuboidal precipitates. Ta, Nb, and Ti integrate into the γ’ phase and are stabilize it at high temperatures.
Carbide Phases: Carbides strengthen the alloy through precipitation hardening but decrease low-temperature ductility.
Topologically Close-Packed (TCP) phases may appear in some Co-based superalloys, but embrittle the alloy and are thus undesirable.

Fe-based

Steel superalloys are of interest because some present creep and oxidation resistance similar to Ni-based superalloys, at far less cost.

Gamma (γ): Fe-based alloys feature a matrix phase of austenite iron (FCC). Alloying elements include: Al, B, C, Co, Cr, Mo, Ni, Nb, Si, Ti, W, and Y. Al (oxidation benefits) must be kept at low weight fractions (wt.%) because Al stabilizes a ferritic (BCC) primary phase matrix, which is undesirable, as it is inferior to the high temperature strength exhibited by an austenitic (FCC) primary phase matrix.

Gamma-prime (γ’): This phase is introduced as precipitates to strengthen the alloy. γ’-Ni3Al precipitates can be introduced with the proper balance of Al, Ni, Nb, and Ti additions.

Microstructure

The two major types of austenitic stainless steels are characterized by the oxide layer that forms on the steel surface: either chromia-forming or alumina-forming. Cr-forming stainless steel is the most common type. However, Cr-forming steels do not exhibit high creep resistance at high temperatures, especially in environments with water vapor. Exposure to water vapor at high temperatures can increase internal oxidation in Cr-forming alloys and rapid formation of volatile Cr (oxy)hydroxides, both of which can reduce durability and lifetime.

Al-forming austenitic stainless steels feature a single-phase matrix of austenite iron (FCC) with an Al-oxide at the surface of the steel. Al is more thermodynamically stable in oxygen than Cr. More commonly, however, precipitate phases are introduced to increase strength and creep resistance. In Al-forming steels, NiAl precipitates are introduced to act as Al reservoirs to maintain the protective alumina layer. In addition, Nb and Cr additions help form and stabilize Al by increasing precipitate volume fractions of NiAl.

At least 5 grades of alumina-forming austenitic (AFA) alloys, with different operating temperatures at oxidation in air + 10% water vapor have been realized:

AFA Grade: (50-60)Fe-(20-25)Ni-(14-15)Cr-(2.5-3.5)Al-(1-3)Nb wt.% base
- 750-800 °C operating temperatures at oxidation in air + 10% water vapor
Low Nickel AFA Grade: 63Fe-12Ni-14Cr-2.5Al-0.6Nb-5Mn3Cu wt.% base
- 650 °C operating temperatures at oxidation in air + 10% water vapor
High Performance AFA Grade: (45-55)Fe-(25-30)Ni-(14-15)Cr(3.5-4.5)Al-(1-3)Nb-(0.02-0.1)Hf/Y wt.% base
- 850-900 °C operating temperatures at oxidation in air + 10% water vapor
Cast AFA Grade: (35-50)Fe-(25-35)Ni-14Cr-(3.5-4)Al-1Nb wt.% base
- 750-1100 °C operating temperatures at oxidation in air + 10% water vapor, depending upon Ni wt.%
AFA superalloy (40-50)Fe-(30-35)Ni-(14-19)Cr-(2.5-3.5)Al-3Nb
- 750-850 °C operating temperatures at oxidation in air + 10% water vapor

Operating temperatures with oxidation in air and no water vapor are expected to be higher. In addition, an AFA superalloy grade exhibits creep strength approaching that of nickel alloy UNS N06617.

Microstructure

In pure Ni₃Al phase Al atoms are placed at the vertices of the cubic cell and form sublattice A. Ni atoms are located at centers of the faces and form sublattice B. The phase is not strictly stoichiometric. An excess of vacancies in one of the sublattices may exist, which leads to deviations from stoichiometry. Sublattices A and B of the γ'-phase can solute a considerable proportion of other elements. The alloying elements are dissolved in the γ-phase. The γ'-phase hardens the alloy through the yield strength anomaly. Dislocations dissociate in the γ'-phase, leading to the formation of an anti-phase boundary. At elevated temperature, the free energy associated with the anti-phase boundary (APB) is considerably reduced if it lies on a particular plane, which by coincidence is not a permitted slip plane. One set of partial dislocations bounding the APB cross-slips so that the APB lies on the low-energy plane, and, since this low-energy plane is not a permitted slip plane, the dissociated dislocation is effectively locked. By this mechanism, the yield strength of γ'-phase Ni₃Al increases with temperature up to about 1000 °C.

Initial material selection for blade applications in gas turbine engines included alloys like the Nimonic series alloys in the 1940s. The early Nimonic series incorporated γ' Ni₃(Al,Ti) precipitates in a γ matrix, as well as various metal-carbon carbides (e.g. Cr₂₃C₆) at the grain boundaries for additional grain boundary strength. Turbine blade components were forged until vacuum induction casting technologies were introduced in the 1950s.This process significantly improved cleanliness, reduced defects, and increased the strength and temperature capability.

Modern superalloys were developed in the 1980s. First generation superalloys incorporated increased Al, Ti, Ta, and Nb content in order to increase the γ' volume fraction. Examples include: PWA1480, René N4 and SRR99. Additionally, the volume fraction of the γ' precipitates increased to about 50–70% with the advent of monocrystal solidification techniques that enable grain boundaries to be entirely eliminated. Because the material contains no grain boundaries, carbides are unnecessary as grain boundary strengthers and were thus eliminated.

Second and third generation superalloys introduce about 3 and 6 weight percent rhenium, for increased temperature capability. Re is a slow diffuser and typically partitions the γ matrix, decreasing the rate of diffusion (and thereby high temperature creep) and improving high temperature performance and increasing service temperatures by 30 °C and 60 °C in second and third generation superalloys, respectively. Re promotes the formation of rafts of the γ' phase (as opposed to cuboidal precipitates). The presence of rafts can decrease creep rate in the power-law regime (controlled by dislocation climb), but can also potentially increase the creep rate if the dominant mechanism is particle shearing. Re tends to promote the formation of brittle TCP phases, which has led to the strategy of reducing Co, W, Mo, and particularly Cr. Later generations of Ni-based superalloys significantly reduced Cr content for this reason, however with the reduction in Cr comes a reduction in oxidation resistance. Advanced coating techniques offset the loss of oxidation resistance accompanying the decreased Cr contents.Examples of second generation superalloys include PWA1484, CMSX-4 and René N5.

Third generation alloys include CMSX-10, and René N6. Fourth, fifth, and sixth generation superalloys incorporate ruthenium additions, making them more expensive than prior Re-containing alloys. The effect of Ru on the promotion of TCP phases is not well-determined. Early reports claimed that Ru decreased the supersaturation of Re in the matrix and thereby diminished the susceptibility to TCP phase formation. Later studies noted an opposite effect. Chen, et al., found that in two alloys differing significantly only in Ru content (USTB-F3 and USTB-F6) that the addition of Ru increased both the partitioning ratio as well as supersaturation in the γ matrix of Cr and Re, and thereby promoted the formation of TCP phases.

The current trend is to avoid very expensive and very heavy elements. An example is Eglin steel, a budget material with compromised temperature range and chemical resistance. It does not contain rhenium or ruthenium and its nickel content is limited. To reduce fabrication costs, it was chemically designed to melt in a ladle (though with improved properties in a vacuum crucible). Conventional welding and casting is possible before heat-treatment. The original purpose was to produce high-performance, inexpensive bomb casings, but the material has proven widely applicable to structural applications, including armor.

Single-crystal superalloys

Single-crystal superalloys (SX or SC superalloys) are formed as a single crystal using a modified version of the directional solidification technique, leaving no grain boundaries. The mechanical properties of most other alloys depend on the presence of grain boundaries, but at high temperatures, they participate in creep and require other mechanisms. In many such alloys, islands of an ordered intermetallic phase sit in a matrix of disordered phase, all with the same crystal lattice. This approximates the dislocation-pinning behavior of grain boundaries, without introducing any amorphous solid into the structure.

Single crystal (SX) superalloys have wide application in the high-pressure turbine section of aero- and industrial gas turbine engines due to the unique combination of properties and performance. Since introduction of single crystal casting technology, SX alloy development has focused on increased temperature capability, and major improvements in alloy performance are associated with rhenium (Re) and ruthenium (Ru).

The creep deformation behavior of superalloy single crystal is strongly temperature-, stress-, orientation- and alloy-dependent. For a single-crystal superalloy, three modes of creep deformation occur under regimes of different temperature and stress: rafting, tertiary, and primary. At low temperature (~750 °C), SX alloys exhibits mostly primary creep behavior. Matan et al. concluded that the extent of primary creep deformation depends strongly on the angle between the tensile axis and the <001>/<011> symmetry boundary. At temperatures above 850 °C, tertiary creep dominates and promotes strain softening behavior. When temperature exceeds 1000 °C, the rafting effect is prevalent where cubic particles transform into flat shapes under tensile stress. The rafts form perpendicular to the tensile axis, since γ phase is transported out of the vertical channels and into the horizontal ones. Reed et al. studied unaxial creep deformation of <001> oriented CMSX-4 single crystal superalloy at 1105 °C and 100 MPa. They reported that rafting is beneficial to creep life since it delays evolution of creep strain. In addition, rafting occurs quickly and suppresses the accumulation of creep strain until a critical strain is reached.

Oxidation

For superalloys operating at high temperatures and exposed to corrosive environments, oxidation behavior is a concern. Oxidation involves chemical reactions of the alloying elements with oxygen to form new oxide phases, generally at the alloy surface. If unmitigated, oxidation can degrade the alloy over time in a variety of ways, including:

sequential surface oxidation, cracking, and spalling, eroding the alloy over time
surface embrittlement through the introduction of oxide phases, promoting crack formation and fatigue failure
depletion of key alloying elements, affecting mechanical properties and possibly compromising performance

Selective oxidation is the primary strategy used to limit these deleterious processes. The ratio of alloying elements promotes formation of a specific oxide phase that then acts as a barrier to further oxidation. Most commonly, aluminum and chromium are used in this role, because they form relatively thin and continuous oxide layers of alumina (Al₂O₃) and chromia (Cr₂O₃), respectively. They offer low oxygen diffusivities, effectively halting further oxidation beneath this layer. In the ideal case, oxidation proceeds through two stages. First, transient oxidation involves the conversion of various elements, especially the majority elements (e.g. nickel or cobalt). Transient oxidation proceeds until the selective oxidation of the sacrificial element forms a complete barrier layer.

The protective effect of selective oxidation can be undermined. The continuity of the oxide layer can be compromised by mechanical disruption due to stress or may be disrupted as a result of oxidation kinetics (e.g. if oxygen diffuses too quickly). If the layer is not continuous, its effectiveness as a diffusion barrier to oxygen is compromised. The stability of the oxide layer is strongly influenced by the presence of other minority elements. For example, the addition of boron, silicon, and yttrium to superalloys promotes oxide layer adhesion, reducing spalling and maintaining continuity.

Oxidation is the most basic form of chemical degradation superalloys may experience. More complex corrosion processes are common when operating environments include salts and sulfur compounds, or under chemical conditions that change dramatically over time. These issues are also often addressed through comparable coatings.

Processing

Superalloys were originally iron-based and cold wrought prior to the 1940s when investment casting of cobalt base alloys significantly raised operating temperatures. The 1950s development of vacuum melting allowed for fine control of the chemical composition of superalloys and reduction in contamination and in turn led to a revolution in processing techniques such as directional solidification of alloys and single crystal superalloys.

Processing methods vary widely depending on the required properties of each item.

Casting and forging

Casting and forging are traditional metallurgical processing techniques that can be used to generate both polycrystalline and monocrystalline products. Polycrystalline casts offer higher fracture resistance, while monocrystalline casts offer higher creep resistance.

Jet turbine engines employ both crystalline component types to take advantage of their individual strengths. The disks of the high-pressure turbine, which are near the central hub of the engine are polycrystalline. The turbine blades, which extend radially into the engine housing, experience a much greater centripetal force, necessitating creep resistance, typically adopting monocrystalline or polycrystalline with a preferred crystal orientation.

Investment casting

Investment casting is a metallurgical processing technique in which a wax form is fabricated and used as a template for a ceramic mold. A ceramic mold is poured around the wax form and solidifies, the wax form is melted out of the ceramic mold, and molten metal is poured into the void left by the wax. This leads to a metal form in the same shape as the original wax form. Investment casting leads to a polycrystalline final product, as nucleation and growth of crystal grains occurs at numerous locations throughout the solid matrix. Generally, the polycrystalline product has no preferred grain orientation.

Directional solidification

Directional solidification uses a thermal gradient to promote nucleation of metal grains on a low temperature surface, as well as to promote their growth along the temperature gradient. This leads to grains elongated along the temperature gradient, and significantly greater creep resistance parallel to the long grain direction. In polycrystalline turbine blades, directional solidification is used to orient the grains parallel to the centripetal force. It is also known as dendritic solidification.

Single crystal growth

Single crystal growth starts with a seed crystal that is used to template growth of a larger crystal. The overall process is lengthy, and machining is necessary after the single crystal is grown.

Powder metallurgy

Powder metallurgy is a class of modern processing techniques in which metals are first powdered, and then formed into the desired shape by heating below the melting point. This is in contrast to casting, which occurs with molten metal. Superalloy manufacturing often employs powder metallurgy because of its material efficiency - typically much less waste metal must be machined away from the final product—and its ability to facilitate mechanical alloying. Mechanical alloying is a process by which reinforcing particles are incorporated into the superalloy matrix material by repeated fracture and welding.

Sintering and hot isostatic pressing

Sintering and hot isostatic pressing are processing techniques used to densify materials from a loosely packed "green body" into a solid object with physically merged grains. Sintering occurs below the melting point, and causes adjacent particles to merge at their boundaries, creating a strong bond between them. In hot isostatic pressing, a sintered material is placed in a pressure vessel and compressed from all directions (isostatically) in an inert atmosphere to affect densification.

Additive manufacturing

Selective laser melting (also known as powder bed fusion) is an additive manufacturing procedure used to create intricately detailed forms from a CAD file. A shape is designed and then converted into slices. These slices are sent to a laser writer to print the final product. In brief, a bed of metal powder is prepared, and a slice is formed in the powder bed by a high energy laser sintering the particles together. The powder bed moves downwards, and a new batch of metal powder is rolled over the top. This layer is then sintered with the laser, and the process is repeated until all slices have been processed. Additive manufacturing can leave pores behind. Many products undergo a heat treatment or hot isostatic pressing procedure to densify the product and reduce porosity.

Coatings

In modern gas turbines, the turbine entry temperature (~1750K) exceeds superalloy incipient melting temperature (~1600K), with the help of surface engineering.

Types

The three types of coatings are: diffusion coatings, overlay coatings, and thermal barrier coatings. Diffusion coatings, mainly constituted with aluminide or platinum-aluminide, is the most common. MCrAlX-based overlay coatings (M=Ni or Co, X=Y, Hf, Si) enhance resistance to corrosion and oxidation. Compared to diffusion coatings, overlay coatings are more expensive, but less dependent on substrate composition, since they must be carried out by air or vacuum plasma spraying (APS/VPS) or electron beam physical vapour deposition (EB-PVD). Thermal barrier coatings provide by far the best enhancement in working temperature and coating life. It is estimated that modern TBC of thickness 300 μm, if used in conjunction with a hollow component and cooling air, has the potential to lower metal surface temperatures by a few hundred degrees.

Thermal barrier coatings

Thermal barrier coatings (TBCs) are used extensively in gas turbine engines to increase component life and engine performance. A coating of about 1-200 µm can reduce the temperature at the superalloy surface by up to 200 K. TBCs are a system of coatings consisting of a bond coat, a thermally grown oxide (TGO), and a thermally insulating ceramic top coat. In most applications, the bond coat is either a MCrAlY (where M=Ni or NiCo) or a Pt modified aluminide coating. A dense bond coat is required to provide protection of the superalloy substrate from oxidation and hot corrosion attack and to form an adherent, slow-growing surface TGO. The TGO is formed by oxidation of the aluminum that is contained in the bond coat. The current (first generation) thermal insulation layer is composed of 7wt % yttria-stabilized zirconia (7YSZ) with a typical thickness of 100–300 µm. Yttria-stabilized zirconia is used due to its low thermal conductivity (2.6W/mK for fully dense material), relatively high coefficient of thermal expansion, and high temperature stability. The electron beam-directed vapor deposition (EB-DVD) process used to apply the TBC to turbine airfoils produces a columnar microstructure with multiple porosity levels. Inter-column porosity is critical to providing strain tolerance (via a low in-plane modulus), as it would otherwise spall on thermal cycling due to thermal expansion mismatch with the superalloy substrate. This porosity reduces the thermal coating's conductivity.

Bond coat

The bond coat adheres the thermal barrier to the substrate. Additionally, the bond coat provides oxidation protection and functions as a diffusion barrier against the motion of substrate atoms towards the environment. The five major types of bond coats are: the aluminides, the platinum-aluminides, MCrAlY, cobalt-cermets, and nickel-chromium. For aluminide bond coatings, the coating's final composition and structure depends on the substrate composition. Aluminides lack ductility below 750 °C, and exhibit limited thermomechanical fatigue strength. Pt-aluminides are similar to the aluminide bond coats except for a layer of Pt (5—10 μm) deposited on the blade. The Pt aids in oxide adhesion and contributes to hot corrosion, increasing blade lifespan. MCrAlY does not strongly interact with the substrate. Normally applied by plasma spraying, MCrAlY coatings from secondary aluminum oxides. This means that the coatings form an outer chromia layer and a secondary alumina layer underneath. These oxide formations occur at high temperatures in the range of those that superalloys usually encounter. The chromia provides oxidation and hot-corrosion resistance. The alumina controls oxidation mechanisms by limiting oxide growth by self-passivating. The yttrium enhances oxide adherence to the substrate, and limits the growth of grain boundaries (which can lead to coat flaking). Addition of rhenium and tantalum increases oxidation resistance. Cobalt-cermet-based coatings consisting of materials such as tungsten carbide/cobalt can be used due to excellent resistance to abrasion, corrosion, erosion, and heat. These cermet coatings perform well in situations where temperature and oxidation damage are significant concerns, such as boilers. One of cobalt cermet's unique advantages is minimal loss of coating mass over time, due to the strength of carbides. Overall, cermet coatings are useful in situations where mechanical demands are equal to chemical demands. Nickel-chromium coatings are used most frequently in boilers fed by fossil fuels, electric furnaces, and waste incineration furnaces, where the danger of oxidizing agents and corrosive compounds in the vapor must be addressed. The specific method of spray-coating depends on the coating composition. Nickel-chromium coatings that also contain iron or aluminum provide better corrosion resistance when they are sprayed and laser glazed, while pure nickel-chromium coatings perform better when thermally sprayed exclusively.

Process methods

Several kinds of coating process are available: pack cementation process, gas phase coating (both are a type of chemical vapor deposition (CVD)), thermal spraying, and physical vapor deposition. In most cases, after the coating process, near-surface regions of parts are enriched with aluminium in a matrix of the nickel aluminide.

Pack cementation

Pack cementation is a widely used CVD technique that consists of immersing the components to be coated in a metal powder mixture and ammonium halide activators and sealing them in a retort. The entire apparatus is placed inside a furnace and heated in a protective atmosphere to a lower than normal temperature that allows diffusion, due to the halide salts chemical reaction that causes a eutectic bond between the two metals. The surface alloy that is formed due to thermal-diffused ion migration has a metallurgical bond to the substrate and an intermetallic layer found in the gamma layer of the surface alloys.

The traditional pack consists of four components at temperatures below (750 °C):

Substrate or parts

Ferrous and non-ferrous powdered alloy: (Ti and/or Al, Si and/or Zn, B and/ or Cr)

Halide salt activator: Ammonium halide salts

Relatively inert filler powder (Al2O3, SiO2, or SiC)

This process includes:

Aluminizing
Chromizing
Siliconizing
Sherardizing
Boronizing
Titaniumizing

Pack cementation has reemerged when combined with other chemical processes to lower the temperatures of metal combinations and give intermetallic properties to different alloy combinations for surface treatments.

Thermal spraying

Thermal spraying involves heating a feedstock of precursor material and spraying it on a surface. Specific techniques depend on desired particle size, coat thickness, spray speed, desired area, etc. Thermal spraying relies on adhesion to the surface. As a result, the surface of the superalloy must be cleaned and prepared, and usually polished, before application.

Plasma spraying

Plasma spraying offers versatility of usable coatings, and high-temperature performance. Plasma spraying can accommodate a wide range of materials, versus other techniques. As long as the difference between melting and decomposition temperatures is greater than 300 K, plasma spraying is viable.

Gas phase

Gas phase coating is carried out at higher temperatures, about 1080 °C. The coating material is usually loaded onto trays without physical contact with the parts to be coated. The coating mixture contains active coating material and activator, but usually not thermal ballast. As in the pack cementation process, gaseous aluminium chloride (or fluoride) is transferred to the surface of the part. However, in this case the diffusion is outwards. This kind of coating also requires diffusion heat treatment.

Failure mechanisms

Failure of thermal barrier coating usually manifests as delamination, which arises from the temperature gradient during thermal cycling between ambient temperature and working conditions coupled with the difference in thermal expansion coefficient of substrate and coating. It is rare for the coating to fail completely – some pieces remain intact, and significant scatter is observed in the time to failure if testing is repeated under identical conditions. Various degradation mechanisms affect thermal barrier coating, and some or all of these must operate before failure finally occurs:

Oxidation at the interface of thermal barrier coating and underlying bond coat;
Depletion of aluminum in bond coat due to oxidation and diffusion with substrate;
Thermal stresses from mismatch in thermal expansion coefficient and growth stress due to the formation of thermally grown oxide layer;
Imperfections near thermally grown oxide layer;
Various other complicating factors during engine operation.

Additionally, TBC life is sensitive to the combination of materials (substrate, bond coat, ceramic) and processes (EB-PVD, plasma spraying) used.

Applications

Turbines

Nickel-based superalloys are used in load-bearing structures requiring the highest homologous temperature of any common alloy system (Tm = 0.9, or 90% of their melting point). Among the most demanding applications for a structural material are those in the hot sections of turbine engines (e.g. turbine blade). They comprise over 50% of the weight of advanced aircraft engines. The widespread use of superalloys in turbine engines coupled with the fact that the thermodynamic efficiency of turbine engines is a function of increasing turbine inlet temperatures has provided part of the motivation for increasing the maximum-use temperature of superalloys. From 1990-2020, turbine airfoil temperature capability increased on average by about 2.2 °C/year. Two major factors have made this increase possible:

Processing techniques that improved alloy cleanliness (thus improving reliability) and/or enabled the production of tailored microstructures such as directionally solidified or single-crystal material.
Alloy development resulting in higher temperature materials primarily through the additions of refractory elements such as Re, W, Ta, and Mo.

About 60% of the temperature increases related to advanced cooling, while 40% have resulted from material improvements. State-of-the-art turbine blade surface temperatures approach 1,150 C. The most severe stress and temperature combinations correspond to an average bulk metal temperature approaching 1,000 C..

Although Ni-based superalloys retain significant strength to 980 C, they tend to be susceptible to environmental attack because of the presence of reactive alloying elements. Surface attack includes oxidation, hot corrosion, and thermal fatigue.

Energy production

High temperature materials are valuable for energy conversion and energy production applications. Maximum energy conversion efficiency is desired in such applications, in accord with the Carnot cycle. Because Carnot efficiency is limited by the temperature difference between the hot and cold reservoirs, higher operating temperatures increase energy conversion efficiency. Operating temperatures are limited by superalloys, limiting applications to around 1000 °C-1400 °C. Energy applications include:

Solar thermal power plants (stainless steel rods containing heated water)
Steam turbines (turbine blades and boiler housing)
Heat exchangers for nuclear reactor systems

Alumina-forming stainless steel is weldable and has potential for use in automotive applications, such as for high temperature exhaust piping and in heat capture and reuse.

Research

Radiolysis

Sandia National Laboratories is studying radiolysis for making superalloys. It uses nanoparticle synthesis to create alloys and superalloys. This process holds promise as a universal method of nanoparticle formation. By developing an understanding of the basic material science, it might be possible to expand research into other aspects of superalloys. Radiolysis produces polycrystalline alloys, which suffer from an unacceptable level of creep.

Austentic steel

Stainless steel alloys remain a research target because of lower production costs, as well as the need for an austenitic stainless steel with high-temperature corrosion resistance in environments with water vapor. Research focuses on increasing high-temperature tensile strength, toughness, and creep resistance to compete with Ni-based superalloys.

Oak Ridge National Laboratory is researching austentic alloys, achieving similar creep and corrosion resistance at 800 °C to that of other austenitic alloys, including Ni-based superalloys.

AFA superalloys

Development of AFA superalloys with a 35 wt.% Ni-base have shown potential for use in operating temperatures upwards to 1,100 °C.

Multi-principal-element superalloy (MPES)

Researchers at Sandia Labs, Ames National Laboratory and Iowa State University reported a 3D-printed superalloy composed of 42% aluminum, 25% titanium, 13% niobium, 8% zirconium, 8% molybdenum and 4% tantalum. Most alloys are made chiefly of one primary element, combined with low amounts of other elements. In contrast MPES have substantial amounts of three or more elements.

Such alloys promise improvements on high-temperature applications, strength-to-weight, fracture toughness, corrosion and radiation resistance, wear resistance, and others. They reported hardness and density of 1.8–2.6 GPa-cm³/g, which surpasses all known alloys, including intermetallic compounds, titanium aluminides, refractory MPEAs, and conventional Ni-based superalloys. This represents a 300% improvement over Inconel 718 based on measured peak hardness of 4.5 GPa and density of 8.2 g/cm³, (0.55 GPa-cm³/g).

The material is stable at 800 °C, hotter than the 570+ °C found in typical coal-based power plants.

The researchers acknowedged that the 3D printing process produces microscopic cracks when forming large parts, and that the feedstock includes metals that limit applicability in cost-sensitive applications.

Insulator (electricity)

From Wikipedia, the free encyclopedia

An electrical insulator is a material in which electric current does not flow freely. The atoms of the insulator have tightly bound electrons which cannot readily move. Other materials—semiconductors and conductors—conduct electric current more easily. The property that distinguishes an insulator is its resistivity; insulators have higher resistivity than semiconductors or conductors. The most common examples are non-metals.

A perfect insulator does not exist because even insulators contain small numbers of mobile charges (charge carriers) which can carry current. In addition, all insulators become electrically conductive when a sufficiently large voltage is applied that the electric field tears electrons away from the atoms. This is known as electrical breakdown, and the voltage at which it occurs is called the breakdown voltage of an insulator. Some materials such as glass, paper and PTFE, which have high resistivity, are very good electrical insulators. A much larger class of materials, even though they may have lower bulk resistivity, are still good enough to prevent significant current from flowing at normally used voltages, and thus are employed as insulation for electrical wiring and cables. Examples include rubber-like polymers and most plastics which can be thermoset or thermoplastic in nature.

Insulators are used in electrical equipment to support and separate electrical conductors without allowing current through themselves. An insulating material used in bulk to wrap electrical cables or other equipment is called insulation. The term insulator is also used more specifically to refer to insulating supports used to attach electric power distribution or transmission lines to utility poles and transmission towers. They support the weight of the suspended wires without allowing the current to flow through the tower to ground.

Physics of conduction in solids

Electrical insulation is the absence of electrical conduction. Electronic band theory (a branch of physics) explains that electric charge flows when quantum states of matter are available into which electrons can be excited. This allows electrons to gain energy and thereby move through a conductor, such as a metal, if an electric potential difference is applied to the material. If no such states are available, the material is an insulator.

Most insulators have a large band gap. This occurs because the "valence" band containing the highest energy electrons is full, and a large energy gap separates this band from the next band above it. There is always some voltage (called the breakdown voltage) that gives electrons enough energy to be excited into this band. Once this voltage is exceeded, electrical breakdown occurs, and the material ceases being an insulator, passing charge. This is usually accompanied by physical or chemical changes that permanently degrade the material and its insulating properties.

When the electric field applied across an insulating substance exceeds in any location the threshold breakdown field for that substance, the insulator suddenly becomes a conductor, causing a large increase in current, an electric arc through the substance. Electrical breakdown occurs when the electric field in the material is strong enough to accelerate free charge carriers (electrons and ions, which are always present at low concentrations) to a high enough velocity to knock electrons from atoms when they strike them, ionizing the atoms. These freed electrons and ions are in turn accelerated and strike other atoms, creating more charge carriers, in a chain reaction. Rapidly the insulator becomes filled with mobile charge carriers, and its resistance drops to a low level. In a solid, the breakdown voltage is proportional to the band gap energy. When corona discharge occurs, the air in a region around a high-voltage conductor can break down and ionise without a catastrophic increase in current. However, if the region of air breakdown extends to another conductor at a different voltage it creates a conductive path between them, and a large current flows through the air, creating an electric arc. Even a vacuum can suffer a sort of breakdown, but in this case the breakdown or vacuum arc involves charges ejected from the surface of metal electrodes rather than produced by the vacuum itself.

In addition, all insulators become conductors at very high temperatures as the thermal energy of the valence electrons is sufficient to put them in the conduction band.

In certain capacitors, shorts between electrodes formed due to dielectric breakdown can disappear when the applied electric field is reduced.

Uses

A flexible coating of an insulator is often applied to electric wire and cable; this assembly is called insulated wire. Wires sometimes don't use an insulating coating, just air, when a solid (e.g. plastic) coating may be impractical. Wires that touch each other produce cross connections, short circuits, and fire hazards. In coaxial cable the center conductor must be supported precisely in the middle of the hollow shield to prevent electro-magnetic wave reflections. Wires that expose high voltages can cause human shock and electrocution hazards.

Most insulated wire and cable products have maximum ratings for voltage and conductor temperature. The product may not have an ampacity (current-carrying capacity) rating, since this is dependent on the surrounding environment (e.g. ambient temperature).

In electronic systems, printed circuit boards are made from epoxy plastic and fibreglass. The nonconductive boards support layers of copper foil conductors. In electronic devices, the tiny and delicate active components are embedded within nonconductive epoxy or phenolic plastics, or within baked glass or ceramic coatings.

In microelectronic components such as transistors and ICs, the silicon material is normally a conductor because of doping, but it can easily be selectively transformed into a good insulator by the application of heat and oxygen. Oxidised silicon is quartz, i.e. silicon dioxide, the primary component of glass.

In high voltage systems containing transformers and capacitors, liquid insulator oil is the typical method used for preventing arcs. The oil replaces air in spaces that must support significant voltage without electrical breakdown. Other high voltage system insulation materials include ceramic or glass wire holders, gas, vacuum, and simply placing wires far enough apart to use air as insulation.

Insulation in electrical apparatus

PVC-sheathed mineral-insulated copper-clad cable with two conducting cores

The most important insulation material is air. A variety of solid, liquid, and gaseous insulators are also used in electrical apparatus. In smaller transformers, generators, and electric motors, insulation on the wire coils consists of up to four thin layers of polymer varnish film. Film-insulated magnet wire permits a manufacturer to obtain the maximum number of turns within the available space. Windings that use thicker conductors are often wrapped with supplemental fiberglass insulating tape. Windings may also be impregnated with insulating varnishes to prevent electrical corona and reduce magnetically induced wire vibration. Large power transformer windings are still mostly insulated with paper, wood, varnish, and mineral oil; although these materials have been used for more than 100 years, they still provide a good balance of economy and adequate performance. Busbars and circuit breakers in switchgear may be insulated with glass-reinforced plastic insulation, treated to have low flame spread and to prevent tracking of current across the material.

In older apparatus made up to the early 1970s, boards made of compressed asbestos may be found; while this is an adequate insulator at power frequencies, handling or repairs to asbestos material can release dangerous fibers into the air and must be carried out cautiously. Wire insulated with felted asbestos was used in high-temperature and rugged applications from the 1920s. Wire of this type was sold by General Electric under the trade name "Deltabeston."

Live-front switchboards up to the early part of the 20th century were made of slate or marble. Some high voltage equipment is designed to operate within a high pressure insulating gas such as sulfur hexafluoride. Insulation materials that perform well at power and low frequencies may be unsatisfactory at radio frequency, due to heating from excessive dielectric dissipation.

Electrical wires may be insulated with polyethylene, crosslinked polyethylene (either through electron beam processing or chemical crosslinking), PVC, Kapton, rubber-like polymers, oil impregnated paper, Teflon, silicone, or modified ethylene tetrafluoroethylene (ETFE). Larger power cables may use compressed inorganic powder, depending on the application.

Flexible insulating materials such as PVC (polyvinyl chloride) are used to insulate the circuit and prevent human contact with a 'live' wire – one having voltage of 600 volts or less. Alternative materials are likely to become increasingly used due to EU safety and environmental legislation making PVC less economic.

In electrical apparatus such as motors, generators, and transformers, various insulation systems are used, classified by their maximum recommended working temperature to achieve acceptable operating life. Materials range from upgraded types of paper to inorganic compounds.

Class I and Class II insulation

All portable or hand-held electrical devices are insulated to protect their user from harmful shock.

Class I insulation requires that the metal body and other exposed metal parts of the device be connected to earth via a grounding wire that is earthed at the main service panel—but only needs basic insulation on the conductors. This equipment needs an extra pin on the power plug for the grounding connection.

Class II insulation means that the device is double insulated. This is used on some appliances such as electric shavers, hair dryers and portable power tools. Double insulation requires that the devices have both basic and supplementary insulation, each of which is sufficient to prevent electric shock. All internal electrically energized components are totally enclosed within an insulated body that prevents any contact with "live" parts. In the EU, double insulated appliances all are marked with a symbol of two squares, one inside the other.

Telegraph and power transmission insulators

Conductors for overhead high-voltage electric power transmission are bare, and are insulated by the surrounding air. Conductors for lower voltages in distribution may have some insulation but are often bare as well. Insulating supports are required at the points where they are supported by utility poles or transmission towers. Insulators are also required where wire enters buildings or electrical devices, such as transformers or circuit breakers, for insulation from the case. Often these are bushings, which are hollow insulators with the conductor inside them.

Materials

Insulators used for high-voltage power transmission are made from glass, porcelain or composite polymer materials. Porcelain insulators are made from clay, quartz or alumina and feldspar, and are covered with a smooth glaze to shed water. Insulators made from porcelain rich in alumina are used where high mechanical strength is a criterion. Porcelain has a dielectric strength of about 4–10 kV/mm. Glass has a higher dielectric strength, but it attracts condensation and the thick irregular shapes needed for insulators are difficult to cast without internal strains. Some insulator manufacturers stopped making glass insulators in the late 1960s, switching to ceramic materials.

Some electric utilities use polymer composite materials for some types of insulators. These are typically composed of a central rod made of fibre reinforced plastic and an outer weathershed made of silicone rubber or ethylene propylene diene monomer rubber (EPDM). Composite insulators are less costly, lighter in weight, and have excellent hydrophobic properties. This combination makes them ideal for service in polluted areas. However, these materials do not yet have the long-term proven service life of glass and porcelain.

Power lines supported by ceramic pin-type insulators in California, USA
10 kV ceramic insulator, showing sheds

Design

The electrical breakdown of an insulator due to excessive voltage can occur in one of two ways:

A puncture arc is a breakdown and conduction of the material of the insulator, causing an electric arc through the interior of the insulator. The heat resulting from the arc usually damages the insulator irreparably. Puncture voltage is the voltage across the insulator (when installed in its normal manner) that causes a puncture arc.
A flashover arc is a breakdown and conduction of the air around or along the surface of the insulator, causing an arc along the outside of the insulator. Insulators are usually designed to withstand flashover without damage. Flashover voltage is the voltage that causes a flash-over arc.

Most high voltage insulators are designed with a lower flashover voltage than puncture voltage, so they flash over before they puncture, to avoid damage.

Dirt, pollution, salt, and particularly water on the surface of a high voltage insulator can create a conductive path across it, causing leakage currents and flashovers. The flashover voltage can be reduced by more than 50% when the insulator is wet. High voltage insulators for outdoor use are shaped to maximise the length of the leakage path along the surface from one end to the other, called the creepage length, to minimise these leakage currents. To accomplish this the surface is moulded into a series of corrugations or concentric disc shapes. These usually include one or more sheds; downward facing cup-shaped surfaces that act as umbrellas to ensure that the part of the surface leakage path under the 'cup' stays dry in wet weather. Minimum creepage distances are 20–25 mm/kV, but must be increased in high pollution or airborne sea-salt areas.

Types

A three-phase insulator used on distribution lines, typically 13.8 kV phase to phase. The lines are held in a diamond pattern, multiple insulators used between poles.

Insulators are characterized in several common classes:

Pin insulator - The pin-type insulator is mounted on a pin affixed on the cross-arm of the pole. The insulator has a groove near the top just below the crown. The conductor passes through this groove and is tied to the insulator with annealed wire of the same material as the conductor. Pin-type insulators are used for transmission and distribution of communication signals, and electric power at voltages up to 33 kV. Insulators made for operating voltages between 33 kV and 69 kV tend to be bulky and have become uneconomical.
Post insulator - A type of insulator in the 1930s that is more compact than traditional pin-type insulators and which has rapidly replaced many pin-type insulators on lines up to 69 kV and in some configurations, can be made for operation at up to 115 kV.
Suspension insulator - For voltages greater than 33 kV, it is a usual practice to use suspension type insulators, consisting of a number of glass or porcelain discs connected in series by metal links in the form of a string. The conductor is suspended at the bottom end of this string while the top end is secured to the cross-arm of the tower. The number of disc units used depends on the voltage.
Strain insulator - A dead end or anchor pole or tower is used where a straight section of line ends, or angles off in another direction. These poles must withstand the lateral (horizontal) tension of the long straight section of wire. To support this lateral load, strain insulators are used. For low voltage lines (less than 11 kV), shackle insulators are used as strain insulators. However, for high voltage transmission lines, strings of cap-and-pin (suspension) insulators are used, attached to the crossarm in a horizontal direction. When the tension load in lines is exceedingly high, such as at long river spans, two or more strings are used in parallel.
Shackle insulator - In early days, the shackle insulators were used as strain insulators. But nowaday, they are frequently used for low voltage distribution lines. Such insulators can be used either in a horizontal position or in a vertical position. They can be directly fixed to the pole with a bolt or to the cross arm.
Bushing - enables one or several conductors to pass through a partition such as a wall or a tank, and insulates the conductors from it.
Line post insulator
Station post insulator
Cut-out

Sheath insulator

An insulator that protects a full length of bottom-contact third rail.

Suspension insulators

Typical number of disc insulator units for standard line voltages
Line voltage (kV)	Discs
34.5	3
69	4
115	6
138	8
161	11
230	14
287	15
345	18
360	23
400	24
500	34
600	44
750	59
765	60

Pin-type insulators are unsuitable for voltages greater than about 69 kV line-to-line. Higher voltage transmission lines usually use modular suspension insulator designs. The wires are suspended from a 'string' of identical disc-shaped insulators that attach to each other with metal clevis pin or ball-and-socket links. The advantage of this design is that insulator strings with different breakdown voltages, for use with different line voltages, can be constructed by using different numbers of the basic units. String insulators can be made for any practical transmission voltage by adding insulator elements to the string. Also, if one of the insulator units in the string breaks, it can be replaced without discarding the entire string.

Each unit is constructed of a ceramic or glass disc with a metal cap and pin cemented to opposite sides. To make defective units obvious, glass units are designed so that an overvoltage causes a puncture arc through the glass instead of a flashover. The glass is heat-treated so it shatters, making the damaged unit visible. However the mechanical strength of the unit is unchanged, so the insulator string stays together.

Standard suspension disc insulator units are 25 centimetres (9.8 in) in diameter and 15 cm (6 in) long, can support a load of 80–120 kilonewtons (18,000–27,000 lb_f), have a dry flashover voltage of about 72 kV, and are rated at an operating voltage of 10–12 kV. However, the flashover voltage of a string is less than the sum of its component discs, because the electric field is not distributed evenly across the string but is strongest at the disc nearest to the conductor, which flashes over first. Metal grading rings are sometimes added around the disc at the high voltage end, to reduce the electric field across that disc and improve flashover voltage.

In very high voltage lines the insulator may be surrounded by corona rings. These typically consist of toruses of aluminium (most commonly) or copper tubing attached to the line. They are designed to reduce the electric field at the point where the insulator is attached to the line, to prevent corona discharge, which results in power losses.

Suspension insulator string (the vertical string of discs) on a 275 kV suspension pylon
Suspended glass disc insulator unit used in suspension insulator strings for high voltage transmission lines

History

The Brookfield Glass Company gained widespread recognition for their prolific production of CD145 insulators, commonly known as "Beehive" insulators, owing to their superior craftsmanship and extensive distribution.

The first electrical systems to make use of insulators were telegraph lines; direct attachment of wires to wooden poles was found to give very poor results, especially during damp weather.

The first glass insulators used in large quantities had an unthreaded pinhole. These pieces of glass were positioned on a tapered wooden pin, vertically extending upwards from the pole's crossarm (commonly only two insulators to a pole and maybe one on top of the pole itself). Natural contraction and expansion of the wires tied to these "threadless insulators" resulted in insulators unseating from their pins, requiring manual reseating.

Amongst the first to produce ceramic insulators were companies in the United Kingdom, with Stiff and Doulton using stoneware from the mid-1840s, Joseph Bourne (later renamed Denby) producing them from around 1860 and Bullers from 1868. Utility patent number 48,906 was granted to Louis A. Cauvet on 25 July 1865 for a process to produce insulators with a threaded pinhole: pin-type insulators still have threaded pinholes.

The invention of suspension-type insulators made high-voltage power transmission possible. As transmission line voltages reached and passed 60,000 volts, the insulators required become very large and heavy, with insulators made for a safety margin of 88,000 volts being about the practical limit for manufacturing and installation. Suspension insulators, on the other hand, can be connected into strings as long as required for the line's voltage.

A large variety of telephone, telegraph and power insulators have been made; some people collect them, both for their historic interest and for the aesthetic quality of many insulator designs and finishes. One collectors organisation is the US National Insulator Association, which has over 9,000 members.

Insulation of antennas

Often a broadcasting radio antenna is built as a mast radiator, which means that the entire mast structure is energised with high voltage and must be insulated from the ground. Steatite mountings are used. They have to withstand not only the voltage of the mast radiator to ground, which can reach values up to 400 kV at some antennas, but also the weight of the mast construction and dynamic forces. Arcing horns and lightning arresters are necessary because lightning strikes to the mast are common.

Guy wires supporting antenna masts usually have strain insulators inserted in the cable run, to keep the high voltages on the antenna from short circuiting to ground or creating a shock hazard. Often guy cables have several insulators, placed to break up the cable into lengths that prevent unwanted electrical resonances in the guy. These insulators are usually ceramic and cylindrical or egg-shaped (see picture). This construction has the advantage that the ceramic is under compression rather than tension, so it can withstand greater load, and that if the insulator breaks, the cable ends are still linked.

These insulators also have to be equipped with overvoltage protection equipment. For the dimensions of the guy insulation, static charges on guys have to be considered. For high masts, these can be much higher than the voltage caused by the transmitter, requiring guys divided by insulators in multiple sections on the highest masts. In this case, guys which are grounded at the anchor basements via a coil - or if possible, directly - are the better choice.

Feedlines attaching antennas to radio equipment, particularly twin-lead type, often must be kept at a distance from metal structures. The insulated supports used for this purpose are called standoff insulators.

Adipose tissue

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Adipose_tissue

Adipose tissue
Adipose tissue is one of the main types of connective tissue.
Morphology of three different classes of adipocytes
Pronunciation	/ˈædɪˌpoʊs/ (listen)
Identifiers
MeSH	D000273
FMA	20110

Adipose tissue, body fat, or simply fat is a loose connective tissue composed mostly of adipocytes. In addition to adipocytes, adipose tissue contains the stromal vascular fraction (SVF) of cells including preadipocytes, fibroblasts, vascular endothelial cells and a variety of immune cells such as adipose tissue macrophages. Adipose tissue is derived from preadipocytes. Its main role is to store energy in the form of lipids, although it also cushions and insulates the body. Far from being hormonally inert, adipose tissue has, in recent years, been recognized as a major endocrine organ, as it produces hormones such as leptin, estrogen, resistin, and cytokines (especially TNFα). In obesity, adipose tissue is also implicated in the chronic release of pro-inflammatory markers known as adipokines, which are responsible for the development of metabolic syndrome, a constellation of diseases, including type 2 diabetes, cardiovascular disease and atherosclerosis. The two types of adipose tissue are white adipose tissue (WAT), which stores energy, and brown adipose tissue (BAT), which generates body heat. The formation of adipose tissue appears to be controlled in part by the adipose gene. Adipose tissue – more specifically brown adipose tissue – was first identified by the Swiss naturalist Conrad Gessner in 1551.

Anatomical features

In humans, adipose tissue is located: beneath the skin (subcutaneous fat), around internal organs (visceral fat), in bone marrow (yellow bone marrow), intermuscular (Muscular system) and in the breast (breast tissue). Adipose tissue is found in specific locations, which are referred to as adipose depots. Apart from adipocytes, which comprise the highest percentage of cells within adipose tissue, other cell types are present, collectively termed stromal vascular fraction (SVF) of cells. SVF includes preadipocytes, fibroblasts, adipose tissue macrophages, and endothelial cells.

Adipose tissue contains many small blood vessels. In the integumentary system, which includes the skin, it accumulates in the deepest level, the subcutaneous layer, providing insulation from heat and cold. Around organs, it provides protective padding. However, its main function is to be a reserve of lipids, which can be oxidised to meet the energy needs of the body and to protect it from excess glucose by storing triglycerides produced by the liver from sugars, although some evidence suggests that most lipid synthesis from carbohydrates occurs in the adipose tissue itself. Adipose depots in different parts of the body have different biochemical profiles. Under normal conditions, it provides feedback for hunger and diet to the brain.

Mice

The obese mouse on the left has large stores of adipose tissue. It is unable to produce the hormone leptin. This causes the mouse to be hungry and eat more, which results in obesity. For comparison, a mouse with a normal amount of adipose tissue is shown on the right.

Mice have eight major adipose depots, four of which are within the abdominal cavity. The paired gonadal depots are attached to the uterus and ovaries in females and the epididymis and testes in males; the paired retroperitoneal depots are found along the dorsal wall of the abdomen, surrounding the kidney, and, when massive, extend into the pelvis. The mesenteric depot forms a glue-like web that supports the intestines and the omental depot (which originates near the stomach and spleen) and - when massive - extends into the ventral abdomen. Both the mesenteric and omental depots incorporate much lymphoid tissue as lymph nodes and milky spots, respectively.

The two superficial depots are the paired inguinal depots, which are found anterior to the upper segment of the hind limbs (underneath the skin) and the subscapular depots, paired medial mixtures of brown adipose tissue adjacent to regions of white adipose tissue, which are found under the skin between the dorsal crests of the scapulae. The layer of brown adipose tissue in this depot is often covered by a "frosting" of white adipose tissue; sometimes these two types of fat (brown and white) are hard to distinguish. The inguinal depots enclose the inguinal group of lymph nodes. Minor depots include the pericardial, which surrounds the heart, and the paired popliteal depots, between the major muscles behind the knees, each containing one large lymph node. Of all the depots in the mouse, the gonadal depots are the largest and the most easily dissected, comprising about 30% of dissectible fat.

Obesity

In an obese person, excess adipose tissue hanging downward from the abdomen is referred to as a panniculus. A panniculus complicates surgery of the morbidly obese individual. It may remain as a literal "apron of skin" if a severely obese person loses large amounts of fat (a common result of gastric bypass surgery). Obesity is treated through exercise, diet, and behavioral therapy. Reconstructive surgery is one aspect of treatment.

Visceral fat

Visceral fat or abdominal fat (also known as organ fat or intra-abdominal fat) is located inside the abdominal cavity, packed between the organs (stomach, liver, intestines, kidneys, etc.). Visceral fat is different from subcutaneous fat underneath the skin, and intramuscular fat interspersed in skeletal muscles. Fat in the lower body, as in thighs and buttocks, is subcutaneous and is not consistently spaced tissue, whereas fat in the abdomen is mostly visceral and semi-fluid. Visceral fat is composed of several adipose depots, including mesenteric, epididymal white adipose tissue (EWAT), and perirenal depots. Visceral fat is often expressed in terms of its area in cm² (VFA, visceral fat area).

An excess of visceral fat is known as abdominal obesity, or "belly fat", in which the abdomen protrudes excessively. New developments such as the Body Volume Index (BVI) are specifically designed to measure abdominal volume and abdominal fat. Excess visceral fat is also linked to type 2 diabetes, insulin resistance, inflammatory diseases, and other obesity-related diseases. Likewise, the accumulation of neck fat (or cervical adipose tissue) has been shown to be associated with mortality. Several studies have suggested that visceral fat can be predicted from simple anthropometric measures, and predicts mortality more accurately than body mass index or waist circumference.

Men are more likely to have fat stored in the abdomen due to sex hormone differences. Estrogen (female sex hormone) causes fat to be stored in the buttocks, thighs, and hips in women. When women reach menopause and the estrogen produced by the ovaries declines, fat migrates from the buttocks, hips and thighs to the waist; later fat is stored in the abdomen.

Visceral fat can be caused by excess cortisol levels. At least 10 MET-hours per week of aerobic exercise leads to visceral fat reduction in those without metabolic-related disorders. Resistance training and caloric restriction also reduce visceral fat, although their effect may not be cumulative. Both exercise and hypocaloric diet cause loss of visceral fat, but exercise has a larger effect on visceral fat versus total fat. High-intensity exercise is one way to effectively reduce total abdominal fat. An energy restricted diet combined with exercise will reduce total body fat and the ratio of visceral adipose tissue to subcutaneous adipose tissue, suggesting a preferential mobilization for visceral fat over subcutaneous fat.

Epicardial fat

Epicardial adipose tissue (EAT) is a particular form of visceral fat deposited around the heart and found to be a metabolically active organ that generates various bioactive molecules, which might significantly affect cardiac function. Marked component differences have been observed in comparing EAT with subcutaneous fat, suggesting a location-specific impact of stored fatty acids on adipocyte function and metabolism.

Subcutaneous fat

Most of the remaining nonvisceral fat is found just below the skin in a region called the hypodermis. This subcutaneous fat is not related to many of the classic obesity-related pathologies, such as heart disease, cancer, and stroke, and some evidence even suggests it might be protective. The typically female (or gynecoid) pattern of body fat distribution around the hips, thighs, and buttocks is subcutaneous fat, and therefore poses less of a health risk compared to visceral fat.

Like all other fat organs, subcutaneous fat is an active part of the endocrine system, secreting the hormones leptin and resistin.

The relationship between the subcutaneous adipose layer and total body fat in a person is often modelled by using regression equations. The most popular of these equations was formed by Durnin and Wormersley, who rigorously tested many types of skinfold, and, as a result, created two formulae to calculate the body density of both men and women. These equations present an inverse correlation between skinfolds and body density—as the sum of skinfolds increases, the body density decreases.

Factors such as sex, age, population size or other variables may make the equations invalid and unusable, and, as of 2012, Durnin and Wormersley's equations remain only estimates of a person's true level of fatness. New formulae are still being created.

Marrow fat

Marrow fat, also known as marrow adipose tissue (MAT), is a poorly understood adipose depot that resides in the bone and is interspersed with hematopoietic cells as well as bony elements. The adipocytes in this depot are derived from mesenchymal stem cells (MSC) which can give rise to fat cells, bone cells as well as other cell types. The fact that MAT increases in the setting of calorie restriction/ anorexia is a feature that distinguishes this depot from other fat depots. Exercise regulates MAT, decreasing MAT quantity and diminishing the size of marrow adipocytes. The exercise regulation of marrow fat suggests that it bears some physiologic similarity to other white adipose depots. Moreover, increased MAT in obesity further suggests a similarity to white fat depots.

Ectopic fat

Ectopic fat is the storage of triglycerides in tissues other than adipose tissue, that are supposed to contain only small amounts of fat, such as the liver, skeletal muscle, heart, and pancreas. This can interfere with cellular functions and hence organ function and is associated with insulin resistance in type-2 diabetes. It is stored in relatively high amounts around the organs of the abdominal cavity, but is not to be confused with visceral fat.

The specific cause for the accumulation of ectopic fat is unknown. The cause is likely a combination of genetic, environmental, and behavioral factors that are involved in excess energy intake and decreased physical activity. Substantial weight loss can reduce ectopic fat stores in all organs and this is associated with an improvement of the function of those organs.

In the latter case, non-invasive weight loss interventions like diet or exercise can decrease ectopic fat (particularly in heart and liver) in overweight or obese children and adults.

Physiology

Free fatty acids (FFAs) are liberated from lipoproteins by lipoprotein lipase (LPL) and enter the adipocyte, where they are reassembled into triglycerides by esterifying them onto glycerol. Human fat tissue contains about 87% lipids.

There is a constant flux of FFAs entering and leaving adipose tissue. The net direction of this flux is controlled by insulin and leptin—if insulin is elevated, then there is a net inward flux of FFA, and only when insulin is low can FFA leave adipose tissue. Insulin secretion is stimulated by high blood sugar, which results from consuming carbohydrates.

In humans, lipolysis (hydrolysis of triglycerides into free fatty acids) is controlled through the balanced control of lipolytic B-adrenergic receptors and a2A-adrenergic receptor-mediated antilipolysis.

Fat cells have an important physiological role in maintaining triglyceride and free fatty acid levels, as well as determining insulin resistance. Abdominal fat has a different metabolic profile—being more prone to induce insulin resistance. This explains to a large degree why central obesity is a marker of impaired glucose tolerance and is an independent risk factor for cardiovascular disease (even in the absence of diabetes mellitus and hypertension). Studies of female monkeys at Wake Forest University (2009) discovered that individuals with higher stress have higher levels of visceral fat in their bodies. This suggests a possible cause-and-effect link between the two, wherein stress promotes the accumulation of visceral fat, which in turn causes hormonal and metabolic changes that contribute to heart disease and other health problems.

Recent advances in biotechnology have allowed for the harvesting of adult stem cells from adipose tissue, allowing stimulation of tissue regrowth using a patient's own cells. In addition, adipose-derived stem cells from both human and animals reportedly can be efficiently reprogrammed into induced pluripotent stem cells without the need for feeder cells. The use of a patient's own cells reduces the chance of tissue rejection and avoids ethical issues associated with the use of human embryonic stem cells.^[52] A growing body of evidence also suggests that different fat depots (i.e. abdominal, omental, pericardial) yield adipose-derived stem cells with different characteristics. These depot-dependent features include proliferation rate, immunophenotype, differentiation potential, gene expression, as well as sensitivity to hypoxic culture conditions. Oxygen levels seem to play an important role on the metabolism and in general the function of adipose-derived stem cells.

Adipose tissue is a major peripheral source of aromatase in both males and females, contributing to the production of estradiol.

Adipose derived hormones include:

Adiponectin
Resistin
Plasminogen activator inhibitor-1 (PAI-1)
TNFα
IL-6
Leptin
Estradiol (E2)

Adipose tissues also secrete a type of cytokines (cell-to-cell signalling proteins) called adipokines (adipose cytokines), which play a role in obesity-associated complications. Perivascular adipose tissue releases adipokines such as adiponectin that affect the contractile function of the vessels that they surround.

Brown fat

Brown fat or brown adipose tissue (BAT) is a specialized form of adipose tissue important for adaptive thermogenesis in humans and other mammals. BAT can generate heat by "uncoupling" the respiratory chain of oxidative phosphorylation within mitochondria through tissue-specific expression of uncoupling protein 1 (UCP1). BAT is primarily located around the neck and large blood vessels of the thorax, where it may effectively act in heat exchange. BAT is robustly activated upon cold exposure by the release of catecholamines from sympathetic nerves that results in UCP1 activation. Nearly half of the nerves present in adipose tissue are sensory neurons connected to the dorsal root ganglia.

BAT activation may also occur in response to overfeeding. UCP1 activity is stimulated by long chain fatty acids that are produced subsequent to β-adrenergic receptor activation. UCP1 is proposed to function as a fatty acid proton symporter, although the exact mechanism has yet to be elucidated. In contrast, UCP1 is inhibited by ATP, ADP, and GTP.

Attempts to simulate this process pharmacologically have so far been unsuccessful. Techniques to manipulate the differentiation of "brown fat" could become a mechanism for weight loss therapy in the future, encouraging the growth of tissue with this specialized metabolism without inducing it in other organs. A review on the eventual therapeutic targeting of brown fat to treat human obesity was published by Samuelson and Vidal-Puig in 2020.

Until recently, brown adipose tissue in humans was thought to be primarily limited to infants, but new evidence has overturned that belief. Metabolically active tissue with temperature responses similar to brown adipose was first reported in the neck and trunk of some human adults in 2007, and the presence of brown adipose in human adults was later verified histologically in the same anatomical regions.

Beige fat and WAT browning

Browning of WAT, also referred to as "beiging", occurs when adipocytes within WAT depots develop features of BAT. Beige adipocytes take on a multilocular appearance (containing several lipid droplets) and increase expression of uncoupling protein 1 (UCP1). In doing so, these normally energy-storing adipocytes become energy-releasing adipocytes.

The calorie-burning capacity of brown and beige fat has been extensively studied as research efforts focus on therapies targeted to treat obesity and diabetes. The drug 2,4-dinitrophenol, which also acts as a chemical uncoupler similarly to UCP1, was used for weight loss in the 1930s. However, it was quickly discontinued when excessive dosing led to adverse side effects including hyperthermia and death. β3 agonists, like CL316,243, have also been developed and tested in humans. However, the use of such drugs has proven largely unsuccessful due to several challenges, including varying species receptor specificity and poor oral bioavailability.

Cold is a primary regulator of BAT processes and induces WAT browning. Browning in response to chronic cold exposure has been well documented and is a reversible process. A study in mice demonstrated that cold-induced browning can be completely reversed in 21 days, with measurable decreases in UCP1 seen within a 24-hour period. A study by Rosenwald et al. revealed that when the animals are re-exposed to a cold environment, the same adipocytes will adopt a beige phenotype, suggesting that beige adipocytes are retained.

Transcriptional regulators, as well as a growing number of other factors, regulate the induction of beige fat. Four regulators of transcription are central to WAT browning and serve as targets for many of the molecules known to influence this process. These include peroxisome proliferator-activated receptor gamma (PPARγ), PRDM16, peroxisome proliferator-activated receptor gamma coactivator 1 alpha (PGC-1α), and Early B-Cell Factor-2 (EBF2).

The list of molecules that influence browning has grown in direct proportion to the popularity of this topic and is constantly evolving as more knowledge is acquired. Among these molecules are irisin and fibroblast growth factor 21 (FGF21), which have been well-studied and are believed to be important regulators of browning. Irisin is secreted from muscle in response to exercise and has been shown to increase browning by acting on beige preadipocytes. FGF21, a hormone secreted mainly by the liver, has garnered a great deal of interest after being identified as a potent stimulator of glucose uptake and a browning regulator through its effects on PGC-1α. It is increased in BAT during cold exposure and is thought to aid in resistance to diet-induced obesity FGF21 may also be secreted in response to exercise and a low protein diet, although the latter has not been thoroughly investigated. Data from these studies suggest that environmental factors like diet and exercise may be important mediators of browning. In mice, it was found that beiging can occur through the production of methionine-enkephalin peptides by type 2 innate lymphoid cells in response to interleukin 33.

Genomics and bioinformatics tools to study browning

Due to the complex nature of adipose tissue and a growing list of browning regulatory molecules, great potential exists for the use of bioinformatics tools to improve study within this field. Studies of WAT browning have greatly benefited from advances in these techniques, as beige fat is rapidly gaining popularity as a therapeutic target for the treatment of obesity and diabetes.

DNA microarray is a bioinformatics tool used to quantify expression levels of various genes simultaneously, and has been used extensively in the study of adipose tissue. One such study used microarray analysis in conjunction with Ingenuity IPA software to look at changes in WAT and BAT gene expression when mice were exposed to temperatures of 28 and 6 °C. The most significantly up- and downregulated genes were then identified and used for analysis of differentially expressed pathways. It was discovered that many of the pathways upregulated in WAT after cold exposure are also highly expressed in BAT, such as oxidative phosphorylation, fatty acid metabolism, and pyruvate metabolism. This suggests that some of the adipocytes switched to a beige phenotype at 6 °C. Mössenböck et al. also used microarray analysis to demonstrate that insulin deficiency inhibits the differentiation of beige adipocytes but does not disturb their capacity for browning. These two studies demonstrate the potential for the use of microarray in the study of WAT browning.

RNA sequencing (RNA-Seq) is a powerful computational tool that allows for the quantification of RNA expression for all genes within a sample. Incorporating RNA-Seq into browning studies is of great value, as it offers better specificity, sensitivity, and a more comprehensive overview of gene expression than other methods. RNA-Seq has been used in both human and mouse studies in an attempt characterize beige adipocytes according to their gene expression profiles and to identify potential therapeutic molecules that may induce the beige phenotype. One such study used RNA-Seq to compare gene expression profiles of WAT from wild-type (WT) mice and those overexpressing Early B-Cell Factor-2 (EBF2). WAT from the transgenic animals exhibited a brown fat gene program and had decreased WAT specific gene expression compared to the WT mice. Thus, EBF2 has been identified as a potential therapeutic molecule to induce beiging.

Chromatin immunoprecipitation with sequencing (ChIP-seq) is a method used to identify protein binding sites on DNA and assess histone modifications. This tool has enabled examination of epigenetic regulation of browning and helps elucidate the mechanisms by which protein-DNA interactions stimulate the differentiation of beige adipocytes. Studies observing the chromatin landscapes of beige adipocytes have found that adipogenesis of these cells results from the formation of cell specific chromatin landscapes, which regulate the transcriptional program and, ultimately, control differentiation. Using ChIP-seq in conjunction with other tools, recent studies have identified over 30 transcriptional and epigenetic factors that influence beige adipocyte development.

Genetics

The thrifty gene hypothesis (also called the famine hypothesis) states that in some populations the body would be more efficient at retaining fat in times of plenty, thereby endowing greater resistance to starvation in times of food scarcity. This hypothesis, originally advanced in the context of glucose metabolism and insulin resistance, has been discredited by physical anthropologists, physiologists, and the original proponent of the idea himself with respect to that context, although according to its developer it remains "as viable as when [it was] first advanced" in other contexts.

In 1995, Jeffrey Friedman, in his residency at the Rockefeller University, together with Rudolph Leibel, Douglas Coleman et al. discovered the protein leptin that the genetically obese mouse lacked.Leptin is produced in the white adipose tissue and signals to the hypothalamus. When leptin levels drop, the body interprets this as a loss of energy, and hunger increases. Mice lacking this protein eat until they are four times their normal size.

Leptin, however, plays a different role in diet-induced obesity in rodents and humans. Because adipocytes produce leptin, leptin levels are elevated in the obese. However, hunger remains, and—when leptin levels drop due to weight loss—hunger increases. The drop of leptin is better viewed as a starvation signal than the rise of leptin as a satiety signal. However, elevated leptin in obesity is known as leptin resistance. The changes that occur in the hypothalamus to result in leptin resistance in obesity are currently the focus of obesity research.

Gene defects in the leptin gene (ob) are rare in human obesity. As of July 2010, only 14 individuals from five families have been identified worldwide who carry a mutated ob gene (one of which was the first ever identified cause of genetic obesity in humans)—two families of Pakistani origin living in the UK, one family living in Turkey, one in Egypt, and one in Austria—and two other families have been found that carry a mutated ob receptor. Others have been identified as genetically partially deficient in leptin, and, in these individuals, leptin levels on the low end of the normal range can predict obesity.

Several mutations of genes involving the melanocortins (used in brain signaling associated with appetite) and their receptors have also been identified as causing obesity in a larger portion of the population than leptin mutations.

Physical properties

Adipose tissue has a density of ~0.9 g/ml. Thus, a person with more adipose tissue will float more easily than a person of the same weight with more muscular tissue, since muscular tissue has a density of 1.06 g/ml.

Body fat meter

A body fat meter is a tool used to measure the body fat to weight ratio in the human body. Different meters use various methods to determine the ratio. They tend to under-read body fat percentage.

In contrast with clinical tools, one relatively inexpensive type of body fat meter uses the principle of bioelectrical impedance analysis (BIA) in order to determine an individual's body fat percentage. To achieve this, the meter passes a small, harmless, electric current through the body and measures the resistance, then uses information on the person's weight, height, age, and sex to calculate an approximate value for the person's body fat percentage. The calculation measures the total volume of water in the body (lean tissue and muscle contain a higher percentage of water than fat), and estimates the percentage of fat based on this information. The result can fluctuate several percentage points depending on what has been eaten and how much water has been drunk before the analysis.

Before bioelectrical impedance analysis machines were developed, there were many different ways in analyzing body composition such as skin fold methods using calipers, underwater weighing, whole body air displacement plethysmography (ADP) and DXA.

Animal studies

Within the fat (adipose) tissue of CCR2 deficient mice, there is an increased number of eosinophils, greater alternative Macrophage activation, and a propensity towards type 2 cytokine expression. Furthermore, this effect was exaggerated when the mice became obese from a high fat diet.

Search This Blog

Friday, August 11, 2023

Superalloy

Chemical development

Active research

Phase formation

Families of superalloys

Ni-based

History

Phases

Co-based

Phases

Fe-based

Microstructure

Microstructure

Single-crystal superalloys

Oxidation

Processing

Casting and forging

Investment casting

Directional solidification

Single crystal growth

Powder metallurgy

Sintering and hot isostatic pressing

Additive manufacturing

Coatings

Types

Thermal barrier coatings

Bond coat

Process methods

Pack cementation

Thermal spraying

Plasma spraying

Gas phase

Failure mechanisms

Applications

Turbines

Energy production

Research

Radiolysis

Austentic steel

AFA superalloys

Multi-principal-element superalloy (MPES)

Insulator (electricity)

Physics of conduction in solids

Uses

Insulation in electrical apparatus

Class I and Class II insulation

Telegraph and power transmission insulators

Materials

Design

Types

Sheath insulator

Suspension insulators

History

Insulation of antennas

Adipose tissue

Anatomical features

Mice

Obesity

Visceral fat

Epicardial fat

Subcutaneous fat

Marrow fat

Ectopic fat

Physiology

Brown fat

Beige fat and WAT browning

Genomics and bioinformatics tools to study browning

Genetics

Physical properties

Body fat meter

Animal studies

Distance education