Chandrasekhar limit

The Chandrasekhar limit (/tʃʌndrəˈʃeɪkər/) is the maximum mass of a stable white dwarf star. The currently accepted value of the Chandrasekhar limit is about 1.4 M_☉ (2.765×10³⁰ kg).^[1][2][3]

White dwarfs resist gravitational collapse primarily through electron degeneracy pressure (compare main sequence stars, which resist collapse through thermal pressure). The Chandrasekhar limit is the mass above which electron degeneracy pressure in the star's core is insufficient to balance the star's own gravitational self-attraction. Consequently, a white dwarf with a mass greater than the limit is subject to further gravitational collapse, evolving into a different type of stellar remnant, such as a neutron star or black hole. Those with masses under the limit remain stable as white dwarfs.^[4] Collapse is not inevitable: most white dwarfs explode rather than undergo collapse.

The limit was named after Subrahmanyan Chandrasekhar, the Indian astrophysicist who improved upon the accuracy of the calculation in 1930, at the age of 20, in India by calculating the limit for a polytrope model of a star in hydrostatic equilibrium, and comparing his limit to the earlier limit found by E.C. Stoner for a uniform density star. Importantly, the existence of a limit, based the conceptual breakthrough of combining relativity with Fermi degeneracy, was indeed first established in separate papers published by Wilhelm Anderson and E. C. Stoner in 1929. The limit was initially ignored by the community of scientists because such a limit would logically require the existence of black holes, which were considered a scientific impossibility at the time. That the roles of Stoner and Anderson are often forgotten in the astronomy community has been noted.^{[5] [6]}

Physics

Radius–mass relations for a model white dwarf. The green curve uses the general pressure law for an ideal Fermi gas, while the blue curve is for a non-relativistic ideal Fermi gas. The black line marks the ultrarelativistic limit.

Electron degeneracy pressure is a quantum-mechanical effect arising from the Pauli exclusion principle. Since electrons are fermions, no two electrons can be in the same state, so not all electrons can be in the minimum-energy level. Rather, electrons must occupy a band of energy levels. Compression of the electron gas increases the number of electrons in a given volume and raises the maximum energy level in the occupied band. Therefore, the energy of the electrons increases on compression, so pressure must be exerted on the electron gas to compress it, producing electron degeneracy pressure. With sufficient compression, electrons are forced into nuclei in the process of electron capture, relieving the pressure.

In the nonrelativistic case, electron degeneracy pressure gives rise to an equation of state of the form P = K₁ρ^5/3, where P is the pressure, ρ is the mass density, and K₁ is a constant. Solving the hydrostatic equation leads to a model white dwarf that is a polytrope of index 3/2 – and therefore has radius inversely proportional to the cube root of its mass, and volume inversely proportional to its mass.^[7]

As the mass of a model white dwarf increases, the typical energies to which degeneracy pressure forces the electrons are no longer negligible relative to their rest masses. The velocities of the electrons approach the speed of light, and special relativity must be taken into account. In the strongly relativistic limit, the equation of state takes the form P = K₂ρ^4/3. This yields a polytrope of index 3, which has a total mass, M_limit say, depending only on K₂.^[8]

For a fully relativistic treatment, the equation of state used interpolates between the equations P = K₁ρ^5/3 for small ρ and P = K₂ρ^4/3 for large ρ. When this is done, the model radius still decreases with mass, but becomes zero at M_limit. This is the Chandrasekhar limit.^[9] The curves of radius against mass for the non-relativistic and relativistic models are shown in the graph. They are colored blue and green, respectively. μ_e has been set equal to 2. Radius is measured in standard solar radii^[10] or kilometers, and mass in standard solar masses.

Calculated values for the limit vary depending on the nuclear composition of the mass.^[11] Chandrasekhar^{[12], eq. (36),[9], eq. (58),[13], eq. (43)} gives the following expression, based on the equation of state for an ideal Fermi gas:

${\displaystyle M_{\rm {limit}}={\frac {\omega _{3}^{0}{\sqrt {3\pi }}}{2}}\left({\frac {\hbar c}{G}}\right)^{\frac {3}{2}}{\frac {1}{(\mu _{\text{e}}m_{\text{H}})^{2}}}}$

where:

• ħ is the reduced Planck constant
• c is the speed of light
• G is the gravitational constant
• μ_e is the average molecular weight per electron, which depends upon the chemical composition of the star.
• m_H is the mass of the hydrogen atom.
• ω⁰
  ₃ ≈ 2.018236 is a constant connected with the solution to the Lane–Emden equation.

As √ħc/G is the Planck mass, the limit is of the order of

${\displaystyle {\frac {M_{\text{Pl}}^{3}}{m_{\text{H}}^{2}}}}$

A more accurate value of the limit than that given by this simple model requires adjusting for various factors, including electrostatic interactions between the electrons and nuclei and effects caused by nonzero temperature.^[11] Lieb and Yau^[14] have given a rigorous derivation of the limit from a relativistic many-particle Schrödinger equation.

History

In 1926, the British physicist Ralph H. Fowler observed that the relationship between the density, energy, and temperature of white dwarfs could be explained by viewing them as a gas of nonrelativistic, non-interacting electrons and nuclei that obey Fermi–Dirac statistics.^[15] This Fermi gas model was then used by the British physicist Edmund Clifton Stoner in 1929 to calculate the relationship among the mass, radius, and density of white dwarfs, assuming they were homogeneous spheres.^[16] Wilhelm Anderson applied a relativistic correction to this model, giving rise to a maximum possible mass of approximately 1.37×10³⁰ kg.^[17] In 1930, Stoner derived the internal energy–density equation of state for a Fermi gas, and was then able to treat the mass–radius relationship in a fully relativistic manner, giving a limiting mass of approximately 2.19×10³⁰ kg (for μ_e = 2.5).^[18] Stoner went on to derive the pressure–density equation of state, which he published in 1932.^[19] These equations of state were also previously published by the Soviet physicist Yakov Frenkel in 1928, together with some other remarks on the physics of degenerate matter.^[20] Frenkel's work, however, was ignored by the astronomical and astrophysical community.^[21]

A series of papers published between 1931 and 1935 had its beginning on a trip from India to England in 1930, where the Indian physicist Subrahmanyan Chandrasekhar worked on the calculation of the statistics of a degenerate Fermi gas.^[22] In these papers, Chandrasekhar solved the hydrostatic equation together with the nonrelativistic Fermi gas equation of state,^[7] and also treated the case of a relativistic Fermi gas, giving rise to the value of the limit shown above.^{[8][9][12][23]} Chandrasekhar reviews this work in his Nobel Prize lecture.^[13] This value was also computed in 1932 by the Soviet physicist Lev Davidovich Landau,^[24] who, however, did not apply it to white dwarfs.

Chandrasekhar's work on the limit aroused controversy, owing to the opposition of the British astrophysicist Arthur Eddington. Eddington was aware that the existence of black holes was theoretically possible, and also realized that the existence of the limit made their formation possible. However, he was unwilling to accept that this could happen. After a talk by Chandrasekhar on the limit in 1935, he replied:

The star has to go on radiating and radiating and contracting and contracting until, I suppose, it gets down to a few km radius, when gravity becomes strong enough to hold in the radiation, and the star can at last find peace. … I think there should be a law of Nature to prevent a star from behaving in this absurd way!^[25]

Eddington's proposed solution to the perceived problem was to modify relativistic mechanics so as to make the law P = K₁ρ^5/3 universally applicable, even for large ρ.^[26] Although Niels Bohr, Fowler, Wolfgang Pauli, and other physicists agreed with Chandrasekhar's analysis, at the time, owing to Eddington's status, they were unwilling to publicly support Chandrasekhar.^{[27], pp. 110–111} Through the rest of his life, Eddington held to his position in his writings,^{[28][29][30][31][32]} including his work on his fundamental theory.^[33] The drama associated with this disagreement is one of the main themes of Empire of the Stars, Arthur I. Miller's biography of Chandrasekhar.^[27] In Miller's view:

Chandra's discovery might well have transformed and accelerated developments in both physics and astrophysics in the 1930s. Instead, Eddington's heavy-handed intervention lent weighty support to the conservative community astrophysicists, who steadfastly refused even to consider the idea that stars might collapse to nothing. As a result, Chandra's work was almost forgotten.^[27]:150

Applications

The core of a star is kept from collapsing by the heat generated by the fusion of nuclei of lighter elements into heavier ones. At various stages of stellar evolution, the nuclei required for this process are exhausted, and the core collapses, causing it to become denser and hotter. A critical situation arises when iron accumulates in the core, since iron nuclei are incapable of generating further energy through fusion. If the core becomes sufficiently dense, electron degeneracy pressure will play a significant part in stabilizing it against gravitational collapse.^[34]

If a main-sequence star is not too massive (less than approximately 8 solar masses), it eventually sheds enough mass to form a white dwarf having mass below the Chandrasekhar limit, which consists of the former core of the star. For more-massive stars, electron degeneracy pressure does not keep the iron core from collapsing to very great density, leading to formation of a neutron star, black hole, or, speculatively, a quark star. (For very massive, low-metallicity stars, it is also possible that instabilities destroy the star completely.)^{[35][36][37][38]} During the collapse, neutrons are formed by the capture of electrons by protons in the process of electron capture, leading to the emission of neutrinos.^{[34], pp. 1046–1047.} The decrease in gravitational potential energy of the collapsing core releases a large amount of energy on the order of 10⁴⁶ joules (100 foes). Most of this energy is carried away by the emitted neutrinos.^[39] This process is believed responsible for supernovae of types Ib, Ic, and II.^[34]

Type Ia supernovae derive their energy from runaway fusion of the nuclei in the interior of a white dwarf. This fate may befall carbon–oxygen white dwarfs that accrete matter from a companion giant star, leading to a steadily increasing mass. As the white dwarf's mass approaches the Chandrasekhar limit, its central density increases, and, as a result of compressional heating, its temperature also increases. This eventually ignites nuclear fusion reactions, leading to an immediate carbon detonation, which disrupts the star and causes the supernova.^{[40], §5.1.2}

A strong indication of the reliability of Chandrasekhar's formula is that the absolute magnitudes of supernovae of Type Ia are all approximately the same; at maximum luminosity, M_V is approximately −19.3, with a standard deviation of no more than 0.3.^{[40], (1)} A 1-sigma interval therefore represents a factor of less than 2 in luminosity. This seems to indicate that all type Ia supernovae convert approximately the same amount of mass to energy.

Super-Chandrasekhar mass supernovae

In April 2003, the Supernova Legacy Survey observed a type Ia supernova, designated SNLS-03D3bb, in a galaxy approximately 4 billion light years away. According to a group of astronomers at the University of Toronto and elsewhere, the observations of this supernova are best explained by assuming that it arose from a white dwarf that grew to twice the mass of the Sun before exploding. They believe that the star, dubbed the "Champagne Supernova" by University of Oklahoma astronomer David R. Branch, may have been spinning so fast that a centrifugal tendency allowed it to exceed the limit. Alternatively, the supernova may have resulted from the merger of two white dwarfs, so that the limit was only violated momentarily. Nevertheless, they point out that this observation poses a challenge to the use of type Ia supernovae as standard candles.^[41][42][43]
Since the observation of the Champagne Supernova in 2003, more very bright type Ia supernovae have been observed that are thought to have originated from white dwarfs whose masses exceeded the Chandrasekhar limit. These include SN 2006gz, SN 2007if and SN 2009dc.^[44] The super-Chandrasekhar mass white dwarfs that gave rise to these supernovae are believed to have had masses up to 2.4–2.8 solar masses.^[44] One way to potentially explain the problem of the Champagne Supernova was considering it the result of an aspherical explosion of a white dwarf. However, spectropolarimetric observations of SN 2009dc showed it had a polarization smaller than 0.3, making the large asphericity theory unlikely.^[44]

Tolman–Oppenheimer–Volkoff limit

After a supernova explosion, a neutron star may be left behind. These objects are even more compact than white dwarfs and are also supported, in part, by degeneracy pressure. A neutron star, however, is so massive and compressed that electrons and protons have combined to form neutrons, and the star is thus supported by neutron degeneracy pressure (as well as short-range repulsive neutron-neutron interactions mediated by the strong force) instead of electron degeneracy pressure. The limiting value for neutron star mass, analogous to the Chandrasekhar limit, is known as the Tolman–Oppenheimer–Volkoff limit.

Schwarzschild metric

From Wikipedia, the free encyclopedia

In Einstein's theory of general relativity, the Schwarzschild metric (also known as the Schwarzschild vacuum or Schwarzschild solution) is the solution to the Einstein field equations that describes the gravitational field outside a spherical mass, on the assumption that the electric charge of the mass, angular momentum of the mass, and universal cosmological constant are all zero. The solution is a useful approximation for describing slowly rotating astronomical objects such as many stars and planets, including Earth and the Sun. The solution is named after Karl Schwarzschild, who first published the solution in 1916.

According to Birkhoff's theorem, the Schwarzschild metric is the most general spherically symmetric, vacuum solution of the Einstein field equations. A Schwarzschild black hole or static black hole is a black hole that has neither electric charge nor angular momentum. A Schwarzschild black hole is described by the Schwarzschild metric, and cannot be distinguished from any other Schwarzschild black hole except by its mass.

The Schwarzschild black hole is characterized by a surrounding spherical boundary, called the event horizon, which is situated at the Schwarzschild radius, often called the radius of a black hole. The boundary is not a physical surface, and if a person fell through the event horizon (before being torn apart by tidal forces), they would not notice any physical surface at that position; it is a mathematical surface which is significant in determining the black hole's properties. Any non-rotating and non-charged mass that is smaller than its Schwarzschild radius forms a black hole. The solution of the Einstein field equations is valid for any mass M, so in principle (according to general relativity theory) a Schwarzschild black hole of any mass could exist if conditions became sufficiently favorable to allow for its formation.

The Schwarzschild metric

In Schwarzschild coordinates, with signature (1, −1, −1, −1), the line element for the Schwarzschild metric has the form

${\displaystyle c^{2}\,{d\tau }^{2}=\left(1-{\frac {r_{\mathrm {s} }}{r}}\right)c^{2}\,dt^{2}-\left(1-{\frac {r_{\mathrm {s} }}{r}}\right)^{-1}\,dr^{2}-r^{2}\left(d\theta ^{2}+\sin ^{2}\theta \,d\varphi ^{2}\right),}$

where

• when dτ² is positive, τ is the proper time (time measured by a clock moving along the same world line with the test particle),
• c is the speed of light,
• t is the time coordinate (measured by a stationary clock located infinitely far from the massive body),
• r is the radial coordinate (measured as the circumference, divided by 2π, of a sphere centered around the massive body),
• θ is the colatitude (angle from north, in units of radians),
• φ is the longitude (also in radians), and
• r_s is the Schwarzschild radius of the massive body, a scale factor which is related to its mass M by r_s = 2GM/c², where G is the gravitational constant.^[1]

The analogue of this solution in classical Newtonian theory of gravity corresponds to the gravitational field around a point particle.^[2]

The radial coordinate turns out to have physical significance as the "proper distance between two events that occur simultaneously relative to the radially moving geodesic clocks, the two events lying on the same radial coordinate line".^[3]

In practice, the ratio r_s/r is almost always extremely small. For example, the Schwarzschild radius r_s of the Earth is roughly 8.9 mm, while the Sun, which is 3.3×10⁵ times as massive^[4] has a Schwarzschild radius of approximately 3.0 km. Even at the surface of the Earth, the corrections to Newtonian gravity are only one part in a billion. The ratio becomes large only in relatively close proximity to black holes and other ultra-dense objects such as neutron stars.^{[citation needed]}

The Schwarzschild metric is a solution of Einstein's field equations in empty space, meaning that it is valid only outside the gravitating body. That is, for a spherical body of radius R the solution is valid for r > R. To describe the gravitational field both inside and outside the gravitating body the Schwarzschild solution must be matched with some suitable interior solution at r = R,^[5] such as the interior Schwarzschild metric.

History

The Schwarzschild solution is named in honour of Karl Schwarzschild, who found the exact solution in 1915 and published it in January 1916,^[6] a little more than a month after the publication of Einstein's theory of general relativity. It was the first exact solution of the Einstein field equations other than the trivial flat space solution. Schwarzschild died shortly after his paper was published, as a result of a disease he contracted while serving in the German army during World War I.^[7]

Johannes Droste in 1916^[8] independently produced the same solution as Schwarzschild, using a simpler, more direct derivation.^[9]

In the early years of general relativity there was a lot of confusion about the nature of the singularities found in the Schwarzschild and other solutions of the Einstein field equations. In Schwarzschild's original paper, he put what we now call the event horizon at the origin of his coordinate system.^[10] In this paper he also introduced what is now known as the Schwarzschild radial coordinate (r in the equations above), as an auxiliary variable. In his equations, Schwarzschild was using a different radial coordinate that was zero at the Schwarzschild radius.

A more complete analysis of the singularity structure was given by David Hilbert^[11] in the following year, identifying the singularities both at r = 0 and r = r_s. Although there was general consensus that the singularity at r = 0 was a 'genuine' physical singularity, the nature of the singularity at r = r_s remained unclear.^[12]

In 1921 Paul Painlevé and in 1922 Allvar Gullstrand independently produced a metric, a spherically symmetric solution of Einstein's equations, which we now know is coordinate transformation of the Schwarzschild metric, Gullstrand–Painlevé coordinates, in which there was no singularity at r = r_s. They, however, did not recognize that their solutions were just coordinate transforms, and in fact used their solution to argue that Einstein's theory was wrong. In 1924 Arthur Eddington produced the first coordinate transformation (Eddington–Finkelstein coordinates) that showed that the singularity at r = r_s was a coordinate artifact, although he also seems to have been unaware of the significance of this discovery. Later, in 1932, Georges Lemaître gave a different coordinate transformation (Lemaître coordinates) to the same effect and was the first to recognize that this implied that the singularity at r = r_s was not physical. In 1939 Howard Robertson showed that a free falling observer descending in the Schwarzschild metric would cross the r = r_s singularity in a finite amount of proper time even though this would take an infinite amount of time in terms of coordinate time t.^[12]

In 1950, John Synge produced a paper^[13] that showed the maximal analytic extension of the Schwarzschild metric, again showing that the singularity at r = r_s was a coordinate artifact and that it represented two horizons. A similar result was later rediscovered by George Szekeres,^[14] and independently Martin Kruskal.^[15] The new coordinates nowadays known as Kruskal-Szekeres coordinates were much simpler than Synge's but both provided a single set of coordinates that covered the entire spacetime. However, perhaps due to the obscurity of the journals in which the papers of Lemaître and Synge were published their conclusions went unnoticed, with many of the major players in the field including Einstein believing that singularity at the Schwarzschild radius was physical.^[12]

Real progress was made in the 1960s when the more exact tools of differential geometry entered the field of general relativity, allowing more exact definitions of what it means for a Lorentzian manifold to be singular. This led to definitive identification of the r = r_s singularity in the Schwarzschild metric as an event horizon (a hypersurface in spacetime that can be crossed in only one direction).^[12]

Singularities and black holes

The Schwarzschild solution appears to have singularities at r = 0 and r = r_s; some of the metric components "blow up" (entail division by zero or division by infinity) at these radii. Since the Schwarzschild metric is expected to be valid only for those radii larger than the radius R of the gravitating body, there is no problem as long as R > r_s. For ordinary stars and planets this is always the case. For example, the radius of the Sun is approximately 700000 km, while its Schwarzschild radius is only 3 km.

The singularity at r = r_s divides the Schwarzschild coordinates in two disconnected patches. The exterior Schwarzschild solution with r > r_s is the one that is related to the gravitational fields of stars and planets. The interior Schwarzschild solution with 0 ≤ r < r_s, which contains the singularity at r = 0, is completely separated from the outer patch by the singularity at r = r_s. The Schwarzschild coordinates therefore give no physical connection between the two patches, which may be viewed as separate solutions. The singularity at r = r_s is an illusion however; it is an instance of what is called a coordinate singularity. As the name implies, the singularity arises from a bad choice of coordinates or coordinate conditions. When changing to a different coordinate system (for example Lemaitre coordinates, Eddington–Finkelstein coordinates, Kruskal–Szekeres coordinates, Novikov coordinates, or Gullstrand–Painlevé coordinates) the metric becomes regular at r = r_s and can extend the external patch to values of r smaller than r_s. Using a different coordinate transformation one can then relate the extended external patch to the inner patch.^[16]

The case r = 0 is different, however. If one asks that the solution be valid for all r one runs into a true physical singularity, or gravitational singularity, at the origin. To see that this is a true singularity one must look at quantities that are independent of the choice of coordinates. One such important quantity is the Kretschmann invariant, which is given by

${\displaystyle R^{\alpha \beta \gamma \delta }R_{\alpha \beta \gamma \delta }={\frac {12r_{\mathrm {s} }^{2}}{r^{6}}}={\frac {48G^{2}M^{2}}{c^{4}r^{6}}}\,.}$

At r = 0 the curvature becomes infinite, indicating the presence of a singularity. At this point the metric, and spacetime itself, is no longer well-defined. For a long time it was thought that such a solution was non-physical. However, a greater understanding of general relativity led to the realization that such singularities were a generic feature of the theory and not just an exotic special case.

The Schwarzschild solution, taken to be valid for all r > 0, is called a Schwarzschild black hole. It is a perfectly valid solution of the Einstein field equations, although it has some rather bizarre properties. For r < r_s the Schwarzschild radial coordinate r becomes timelike and the time coordinate t becomes spacelike. A curve at constant r is no longer a possible worldline of a particle or observer, not even if a force is exerted to try to keep it there; this occurs because spacetime has been curved so much that the direction of cause and effect (the particle's future light cone) points into the singularity^{[citation needed]}. The surface r = r_s demarcates what is called the event horizon of the black hole. It represents the point past which light can no longer escape the gravitational field. Any physical object whose radius R becomes less than or equal to the Schwarzschild radius will undergo gravitational collapse and become a black hole.^[17]

Flamm's paraboloid

A plot of Flamm's paraboloid. It should not be confused with the unrelated concept of a gravity well.

The spatial curvature of the Schwarzschild solution for r > r_s can be visualized as the graphic shows. Consider a constant time equatorial slice through the Schwarzschild solution (θ = π/2, t = constant) and let the position of a particle moving in this plane be described with the remaining Schwarzschild coordinates (r, φ). Imagine now that there is an additional Euclidean dimension w, which has no physical reality (it is not part of spacetime). Then replace the (r, φ) plane with a surface dimpled in the w direction according to the equation (Flamm's paraboloid)

${\displaystyle w=2{\sqrt {r_{\mathrm {s} }\left(r-r_{\mathrm {s} }\right)}}.}$

This surface has the property that distances measured within it match distances in the Schwarzschild metric, because with the definition of w above,

${\displaystyle dw^{2}+dr^{2}+r^{2}\,d\varphi ^{2}=-c^{2}\,d\tau ^{2}={\frac {dr^{2}}{1-{\frac {r_{\mathrm {s} }}{r}}}}+r^{2}\,d\varphi ^{2}}$

Thus, Flamm's paraboloid is useful for visualizing the spatial curvature of the Schwarzschild metric. It should not, however, be confused with a gravity well. No ordinary (massive or massless) particle can have a worldline lying on the paraboloid, since all distances on it are spacelike (this is a cross-section at one moment of time, so any particle moving on it would have an infinite velocity). Even a tachyon would not move along the path that one might naively expect from a "rubber sheet" analogy: in particular, if the dimple is drawn pointing upward rather than downward, the tachyon's path still curves toward the central mass, not away. See the gravity well article for more information.

Flamm's paraboloid may be derived as follows. The Euclidean metric in the cylindrical coordinates (r, φ, w) is written

${\displaystyle ds^{2}=dw^{2}+dr^{2}+r^{2}\,d\varphi ^{2}\,.}$

Letting the surface be described by the function w = w(r), the Euclidean metric can be written as

${\displaystyle ds^{2}=\left(1+\left({\frac {dw}{dr}}\right)^{2}\right)\,dr^{2}+r^{2}\,d\varphi ^{2}\,,}$

Comparing this with the Schwarzschild metric in the equatorial plane (θ = π/2) at a fixed time (t = constant, dt = 0)

${\displaystyle ds^{2}=\left(1-{\frac {r_{\mathrm {s} }}{r}}\right)^{-1}\,dr^{2}+r^{2}\,d\varphi ^{2}\,,}$

yields an integral expression for w(r):

${\displaystyle w(r)=\int {\frac {dr}{\sqrt {{\frac {r}{r_{\mathrm {s} }}}-1}}}=2r_{\mathrm {s} }{\sqrt {{\frac {r}{r_{\mathrm {s} }}}-1}}+{\mbox{constant}}}$

whose solution is Flamm's paraboloid.

Orbital motion

Comparison between the orbit of a testparticle in Newtonian (left) and Schwarzschild (right) spacetime; note the Apsidal precession on the right.

A particle orbiting in the Schwarzschild metric can have a stable circular orbit with r > 3r_s. Circular orbits with r between 1.5r_s and 3r_s are unstable, and no circular orbits exist for r < 1.5r_s. The circular orbit of minimum radius 1.5r_s corresponds to an orbital velocity approaching the speed of light. It is possible for a particle to have a constant value of r between r_s and 1.5r_s, but only if some force acts to keep it there.

Noncircular orbits, such as Mercury's, dwell longer at small radii than would be expected classically. This can be seen as a less extreme version of the more dramatic case in which a particle passes through the event horizon and dwells inside it forever. Intermediate between the case of Mercury and the case of an object falling past the event horizon, there are exotic possibilities such as knife-edge orbits, in which the satellite can be made to execute an arbitrarily large number of nearly circular orbits, after which it flies back outward.

Symmetries

The group of isometries of the Schwarzschild metric is the subgroup of the ten-dimensional Poincaré group which takes the time axis (trajectory of the star) to itself. It omits the spatial translations (three dimensions) and boosts (three dimensions). It retains the time translations (one dimension) and rotations (three dimensions). Thus it has four dimensions. Like the Poincaré group, it has four connected components: the component of the identity; the time reversed component; the spatial inversion component; and the component which is both time reversed and spatially inverted.

Curvatures

The Ricci curvature scalar and the Ricci curvature tensor are both zero. Non-zero components of the Riemann curvature tensor are^[20]

${\displaystyle R^{t}{}_{rrt}=2R^{\theta }{}_{r\theta r}=2R^{\phi }{}_{r\phi r}={\frac {r_{s}}{r^{2}(r_{s}-r)}},}$

${\displaystyle 2R^{t}{}_{\theta \theta t}=2R^{r}{}_{\theta \theta r}=R^{\phi }{}_{\theta \phi \theta }={\frac {r_{s}}{r}},}$

${\displaystyle 2R^{t}{}_{\phi \phi t}=2R^{r}{}_{\phi \phi r}=-R^{\theta }{}_{\phi \phi \theta }={\frac {r_{s}\sin ^{2}(\theta )}{r}},}$

${\displaystyle R^{r}{}_{trt}=-2R^{\theta }{}_{t\theta t}=-2R^{\phi }{}_{t\phi t}=c^{2}{\frac {r_{s}(r_{s}-r)}{r^{4}}}}$

Components which are obtainable by the symmetries of the Riemann tensor are not displayed.