Specific impulse (usually abbreviated Isp) is a measure of how effectively a rocket uses propellant or a jet engine uses fuel. By definition, it is the total impulse (or change in momentum) delivered per unit of propellant consumed and is dimensionally equivalent to the generated thrust divided by the propellant mass flow rate or weight flow rate. If mass (kilogram, pound-mass, or slug) is used as the unit of propellant, then specific impulse has units of velocity. If weight (newton or pound-force) is used instead, then specific impulse has units of time (seconds). Multiplying flow rate by the standard gravity (g0) converts specific impulse from the mass basis to the weight basis.
A propulsion system with a higher specific impulse uses the mass
of the propellant more effectively in creating forward thrust and, in
the case of a rocket, less propellant needed for a given delta-v, per the Tsiolkovsky rocket equation.
In rockets, this means the engine is more effective at gaining
altitude, distance, and velocity. This effectiveness is less important
in jet engines that employ wings and use outside air for combustion and
carry payloads that are much heavier than the propellant.
Specific impulse includes the contribution to impulse provided by external air that has been used for combustion and is exhausted with the spent propellant. Jet engines use outside air, and therefore have a much higher specific impulse than rocket engines. The specific impulse in terms of propellant mass spent has units of distance per time, which is an artificial velocity called the "effective exhaust velocity". This is higher than the actual exhaust velocity because the mass of the combustion air is not being accounted for. Actual and effective exhaust velocity are the same in rocket engines not utilizing air or other intake propellant such as water.
Specific impulse is inversely proportional to specific fuel consumption (SFC) by the relationship Isp = 1/(go·SFC) for SFC in kg/(N·s) and Isp = 3600/SFC for SFC in lb/(lbf·hr).
Specific impulse includes the contribution to impulse provided by external air that has been used for combustion and is exhausted with the spent propellant. Jet engines use outside air, and therefore have a much higher specific impulse than rocket engines. The specific impulse in terms of propellant mass spent has units of distance per time, which is an artificial velocity called the "effective exhaust velocity". This is higher than the actual exhaust velocity because the mass of the combustion air is not being accounted for. Actual and effective exhaust velocity are the same in rocket engines not utilizing air or other intake propellant such as water.
Specific impulse is inversely proportional to specific fuel consumption (SFC) by the relationship Isp = 1/(go·SFC) for SFC in kg/(N·s) and Isp = 3600/SFC for SFC in lb/(lbf·hr).
General considerations
The amount of propellant is normally measured either in units of mass or weight. If mass is used, specific impulse is an impulse per unit mass, which dimensional analysis shows to have units of speed, and so specific impulses are often measured in meters per second and are often termed effective exhaust velocity.
However, if propellant weight is used, an impulse divided by a force
(weight) turns out to be a unit of time, and so specific impulses are
measured in seconds. These two formulations are both widely used and
differ from each other by a factor of g0, the dimensioned constant of gravitational acceleration at the surface of the Earth.
Note that the rate of change of momentum of a rocket (including its propellant) per unit time is equal to the thrust.
The higher the specific impulse, the less propellant is needed to
produce a given thrust during a given time. In this regard a propellant
is more efficient the greater its specific impulse. This should not be
confused with energy efficiency,
which can decrease as specific impulse increases, since propulsion
systems that give high specific impulse require high energy to do so.
Thrust and specific impulse should not be confused. The specific impulse is the impulse produced per unit of propellant expended, while thrust is the momentary or peak force supplied by a particular engine. In many cases, propulsion systems with very high specific impulse—some ion thrusters reach 10,000 seconds—produce low thrust.
When calculating specific impulse, only propellant carried with
the vehicle before use is counted. For a chemical rocket, the propellant
mass therefore would include both fuel and oxidizer. For air-breathing engines, only the mass of the fuel is counted, not the mass of air passing through the engine.
Air resistance and the engine's inability to keep a high specific
impulse at a fast burn rate are why all the propellant is not used as
fast as possible.
A heavier engine with a higher specific impulse may not be as
effective in gaining altitude, distance, or velocity as a lighter engine
with a lower specific impulse.
If it were not for air resistance and the reduction of propellant
during flight, specific impulse would be a direct measure of the
engine's effectiveness in converting propellant weight or mass into
forward momentum.
Units
|
Specific impulse | Effective exhaust velocity |
Specific fuel consumption | |
---|---|---|---|---|
By weight | By mass | |||
SI | = x s | = 9.80665·x N·s/kg | = 9.80665·x m/s | = 101,972/x g/(kN·s) |
English engineering units | = x s | = x lbf·s/lb | = 32.17405·x ft/s | = 3,600/x lb/(lbf·hr) |
The most common unit for specific impulse is the second, both in SI contexts as well as where imperial or customary units
are used. The advantage of seconds is that the unit and numerical value
are identical across systems of measurements, and essentially
universal. Nearly all manufacturers quote their engine performance in
seconds, and the unit is also useful for specifying aircraft engine
performance.
The use of metres per second
to specify effective exhaust velocity is also reasonably common. The
unit is intuitive when describing rocket engines, although the effective
exhaust speed of the engines may be significantly different from the
actual exhaust speed, which may be due to the fuel and oxidizer that is
dumped overboard after powering turbopumps. For airbreathing jet engines, the effective exhaust velocity is not physically meaningful, although it can be used for comparison purposes.
The values expressed in N·s/kg are not uncommon and are numerically equal to the effective exhaust velocity in m/s (from Newton's second law and the definition of the newton).
Another equivalent unit is specific fuel consumption.
This has units of g/(kN·s) or lb/(lbf·hr) and is inversely proportional
to specific impulse. Specific fuel consumption is used extensively for
describing the performance of air-breathing jet engines.
Specific impulse in seconds
General definition
For
all vehicles, specific impulse (impulse per unit weight-on-Earth of
propellant) in seconds can be defined by the following equation:
where:
- is the thrust obtained from the engine, in newtons (or pounds force),
- is the standard gravity, which is nominally the gravity at Earth's surface, in m/s2 (or ft/s2),
- is the specific impulse measured in seconds,
- is the mass flow rate in kg/s (or slugs/s), which is the negative of the time-rate of change of the vehicle's mass (since propellant is being expelled).
The English unit pound mass is more commonly used than the slug, and when using pounds per second for mass flow rate, the conversion constant g0 becomes unnecessary, because the slug is dimensionally equivalent to pounds divided by g0:
Isp in seconds is the amount of time a rocket
engine can generate thrust, given a quantity of propellant whose weight
is equal to the engine's thrust.
The advantage of this formulation is that it may be used for
rockets, where all the reaction mass is carried on board, as well as
airplanes, where most of the reaction mass is taken from the atmosphere.
In addition, it gives a result that is independent of units used
(provided the unit of time used is the second).
Rocketry
In
rocketry, where the only reaction mass is the propellant, an equivalent
way of calculating the specific impulse in seconds is also frequently
used. In this sense, specific impulse is defined as the thrust
integrated over time per unit weight-on-Earth of the propellant:
where
- is the specific impulse measured in seconds,
- is the average exhaust speed along the axis of the engine (in ft/s or m/s),
- is the standard gravity (in ft/s2 or m/s2).
In rockets, due to atmospheric effects, the specific impulse varies
with altitude, reaching a maximum in a vacuum. This is because the
exhaust velocity isn't simply a function of the chamber pressure, but is
a function of the difference between the interior and exterior of the combustion chamber.
It is therefore important to note whether the specific impulse refers to
operation in a vacuum or at sea level. Values are usually indicated
with or near the units of specific impulse (e.g. "sl", "vac").
Specific impulse as a speed (effective exhaust velocity)
Because of the geocentric factor of g0
in the equation for specific impulse, many prefer to define the
specific impulse of a rocket (in particular) in terms of thrust per unit
mass flow of propellant (instead of per unit weight flow). This is an
equally valid (and in some ways somewhat simpler) way of defining the
effectiveness of a rocket propellant. For a rocket, the specific impulse
defined in this way is simply the effective exhaust velocity relative
to the rocket, ve. The two definitions of specific impulse are proportional to one another, and related to each other by:
where
- is the specific impulse in seconds,
- is the specific impulse measured in m/s, which is the same as the effective exhaust velocity measured in m/s (or ft/s if g is in ft/s2),
- is the standard gravity, 9.80665 m/s2 (in Imperial units 32.174 ft/s2).
This equation is also valid for air-breathing jet engines, but is rarely used in practice.
(Note that different symbols are sometimes used; for example, c is also sometimes seen for exhaust velocity. While the symbol
might logically be used for specific impulse in units of N·s/kg; to
avoid confusion, it is desirable to reserve this for specific impulse
measured in seconds.)
It is related to the thrust, or forward force on the rocket by the equation:
where is the propellant mass flow rate, which is the rate of decrease of the vehicle's mass.
A rocket must carry all its fuel with it, so the mass of the
unburned fuel must be accelerated along with the rocket itself.
Minimizing the mass of fuel required to achieve a given push is crucial
to building effective rockets. The Tsiolkovsky rocket equation shows that for a rocket with a given empty mass and a given amount of fuel, the total change in velocity it can accomplish is proportional to the effective exhaust velocity.
A spacecraft without propulsion follows an orbit determined by
its trajectory and any gravitational field. Deviations from the
corresponding velocity pattern (these are called Δv) are achieved by sending exhaust mass in the direction opposite to that of the desired velocity change.
Actual exhaust speed versus effective exhaust speed
Note that effective exhaust velocity and actual
exhaust velocity can be significantly different, for example when a
rocket is run within the atmosphere, atmospheric pressure on the outside
of the engine causes a retarding force that reduces the specific
impulse, and the effective exhaust velocity goes down, whereas the
actual exhaust velocity is largely unaffected. Also, sometimes rocket
engines have a separate nozzle for the turbo-pump turbine gas, and then
calculating the effective exhaust velocity requires averaging the two
mass flows as well as accounting for any atmospheric pressure.
For air-breathing jet engines, particularly turbofans,
the actual exhaust velocity and the effective exhaust velocity are
different by orders of magnitude. This is because a good deal of
additional momentum is obtained by using air as reaction mass. This
allows a better match between the airspeed and the exhaust speed, which
saves energy/propellant and enormously increases the effective exhaust
velocity while reducing the actual exhaust velocity.
Energy efficiency
Rockets
For rockets and rocket-like engines such as ion-drives a higher implies lower energy efficiency: the power needed to run the engine is simply:
where ve is the actual jet velocity.
whereas from momentum considerations the thrust generated is:
Dividing the power by the thrust to obtain the specific power requirements we get:
Hence the power needed is proportional to the exhaust velocity, with
higher velocities needing higher power for the same thrust, causing less
energy efficiency per unit thrust.
However, the total energy for a mission depends on total
propellant use, as well as how much energy is needed per unit of
propellant. For low exhaust velocity with respect to the mission
delta-v, enormous amounts of reaction mass is needed. In fact a very low
exhaust velocity is not energy efficient at all for this reason; but it
turns out that neither are very high exhaust velocities.
Theoretically, for a given delta-v, in space, among all fixed values for the exhaust speed the value is the most energy efficient for a specified (fixed) final mass, see energy in spacecraft propulsion.
However, a variable exhaust speed can be more energy efficient
still. For example, if a rocket is accelerated from some positive
initial speed using an exhaust speed equal to the speed of the rocket no
energy is lost as kinetic energy of reaction mass, since it becomes
stationary.
(Theoretically, by making this initial speed low and using another
method of obtaining this small speed, the energy efficiency approaches
100%, but requires a large initial mass.) In this case the rocket keeps
the same momentum,
so its speed is inversely proportional to its remaining mass. During
such a flight the kinetic energy of the rocket is proportional to its
speed and, correspondingly, inversely proportional to its remaining
mass. The power needed per unit acceleration is constant throughout the
flight; the reaction mass to be expelled per unit time to produce a
given acceleration is proportional to the square of the rocket's
remaining mass.
Also it is advantageous to expel reaction mass at a location where the gravity potential is low, see Oberth effect.
Air breathing
Air-breathing engines such as turbojets
increase the momentum generated from their propellant by using it to
power the acceleration of inert air rearwards. It turns out that the
amount of energy needed to generate a particular amount of thrust is
inversely proportional to the amount of air propelled rearwards, thus
increasing the mass of air (as with a turbofan) both improves energy efficiency as well as .
Examples
Engine | Effective exhaust velocity (m/s) |
Specific impulse (s) |
Exhaust specific energy (MJ/kg) |
---|---|---|---|
Turbofan jet engine (actual V is ~300 m/s) |
29,000 | 3,000 | Approx. 0.05 |
Space Shuttle Solid Rocket Booster | 2,500 | 250 | 3 |
Liquid oxygen-liquid hydrogen | 4,400 | 450 | 9.7 |
Ion thruster | 29,000 | 3,000 | 430 |
VASIMR | 30,000–120,000 | 3,000–12,000 | 1,400 |
Dual-stage 4-grid electrostatic ion thruster | 210,000 | 21,400 | 22,500 |
Ideal photonic rocket | 299,792,458 | 30,570,000 | 89,875,517,874 |
An example of a specific impulse measured in time is 453 seconds, which is equivalent to an effective exhaust velocity of 4,440 m/s, for the Space Shuttle Main Engines when operating in a vacuum. An air-breathing jet engine typically has a much larger specific impulse than a rocket; for example a turbofan jet engine may have a specific impulse of 6,000 seconds or more at sea level whereas a rocket would be around 200–400 seconds.
An air-breathing engine is thus much more propellant efficient
than a rocket engine, because the actual exhaust speed is much lower,
the air provides an oxidizer, and air is used as reaction mass. Since
the physical exhaust velocity is lower, the kinetic energy the exhaust
carries away is lower and thus the jet engine uses far less energy to
generate thrust (at subsonic speeds). While the actual exhaust velocity is lower for air-breathing engines, the effective
exhaust velocity is very high for jet engines. This is because the
effective exhaust velocity calculation essentially assumes that the
propellant is providing all the thrust, and hence is not physically
meaningful for air-breathing engines; nevertheless, it is useful for
comparison with other types of engines.
The highest specific impulse for a chemical propellant ever test-fired in a rocket engine was 542 seconds (5,320 m/s) with a tripropellant of lithium, fluorine, and hydrogen. However, this combination is impractical.
Nuclear thermal rocket
engines differ from conventional rocket engines in that thrust is
created strictly through thermodynamic phenomena, with no chemical
reaction.
The nuclear rocket typically operates by passing hydrogen gas through a
superheated nuclear core. Testing in the 1960s yielded specific
impulses of about 850 seconds (8,340 m/s), about twice that of the Space
Shuttle engines.
A variety of other non-rocket propulsion methods, such as ion thrusters, give much higher specific impulse but with much lower thrust; for example the Hall effect thruster on the SMART-1 satellite has a specific impulse of 1,640 s (16,100 m/s) but a maximum thrust of only 68 millinewtons. The variable specific impulse magnetoplasma rocket (VASIMR) engine currently in development will theoretically yield 20,000−300,000 m/s, and a maximum thrust of 5.7 newtons.
Larger engines
Here are some example numbers for larger jet and rocket engines:
Engine type | Scenario | Spec. fuel cons. | Specific impulse (s) |
Effective exhaust velocity (m/s) | |
---|---|---|---|---|---|
(lb/lbf·h) | (g/kN·s) | ||||
NK-33 rocket engine | Vacuum | 10.9 | 308 | 331 | 3250 |
SSME rocket engine | Space shuttle vacuum | 7.95 | 225 | 453 | 4440 |
Ramjet | Mach 1 | 4.5 | 130 | 800 | 7800 |
J-58 turbojet | SR-71 at Mach 3.2 (Wet) | 1.9 | 54 | 1900 | 19000 |
Eurojet EJ200 | Reheat | 1.66–1.73 | 47–49 | 2080–2170 | 20400–21300 |
Rolls-Royce/Snecma Olympus 593 turbojet | Concorde Mach 2 cruise (Dry) | 1.195 | 33.8 | 3010 | 29500 |
Eurojet EJ200 | Dry | 0.74–0.81 | 21–23 | 4400–4900 | 44000–48000 |
CF6-80C2B1F turbofan | Boeing 747-400 cruise | 0.605 | 17.1 | 5950 | 58400 |
General Electric CF6 turbofan | Sea level | 0.307 | 8.7 | 11700 | 115000 |