Search This Blog

Friday, October 7, 2022

Peak uranium

From Wikipedia, the free encyclopedia

Peak uranium is the point in time that the maximum global uranium production rate is reached. After that peak, according to Hubbert peak theory, the rate of production enters a terminal decline. While uranium is used in nuclear weapons, its primary use is for energy generation via nuclear fission of the uranium-235 isotope in a nuclear power reactor. Each kilogram of uranium-235 fissioned releases the energy equivalent of millions of times its mass in chemical reactants, as much energy as 2700 tons of coal, but uranium-235 accounts for only 0.7% of the mass of natural uranium. While Uranium-235 can be "bred" from 234
U
, a natural decay product of 238
U
present at 55 ppm in all natural uranium samples, Uranium-235 is ultimately a finite non-renewable resource. Due to the currently low price of uranium, the majority of commercial light water reactors operate on a "once through fuel cycle" which leaves virtually all the energy contained in the original 238
U
- which makes up over 99% of natural uranium - unused. Nuclear reprocessing is a technology currently used at industrial scale in France, Russia and Japan, which can recover part of that energy by producing MOX fuel or Remix Fuel for use in conventional power generating light water reactors. However, at current uranium prices, this is widely deemed uneconomical if only the "input" side is considered.

Advances in breeder reactor technology could allow the current reserves of uranium to provide power for humanity for billions of years, thus making nuclear power a sustainable energy. However, in 2010 the International Panel on Fissile Materials said "After six decades and the expenditure of the equivalent of tens of billions of dollars, the promise of breeder reactors remains largely unfulfilled and efforts to commercialize them have been steadily cut back in most countries." But in 2016, the Russian BN-800 fast-neutron breeder reactor started producing commercially at full power (800 MWe), joining the previous BN-600. As of 2020, the Chinese CFR-600 is under construction after the success of the China Experimental Fast Reactor, based on the BN-800. These reactors are currently generating mostly electricity rather than new fuel because the abundance and low price of mined and reprocessed uranium oxide makes breeding uneconomical, but they can switch to breed new fuel and close the cycle as needed.

The CANDU reactor which was designed to be fueled with natural uranium is capable of using spent fuel from Light Water Reactors as fuel, since it contains more fissile material than natural uranium. Research into "DUPIC" - direct use of PWR spent fuel in CANDU type reactors - is ongoing and could increase the usability of fuel without the need for reprocessing.

M. King Hubbert created his peak theory in 1956 for a variety of finite resources such as coal, oil, and natural gas. He and others since have argued that if the nuclear fuel cycle can be closed, uranium could become equivalent to renewable energy sources as concerns its availability. Breeding and nuclear reprocessing potentially would allow the extraction of the largest amount of energy from natural uranium. However, only a small amount of uranium is currently being bred into plutonium and only a small amount of fissile uranium and plutonium is being recovered from nuclear waste worldwide. Furthermore, the technologies to eliminate the waste in the nuclear fuel cycle do not yet exist. Since the nuclear fuel cycle is effectively not closed, Hubbert peak theory may be applicable.

Pessimistic predictions of future high-grade uranium production operate on the thesis that either the peak has already occurred in the 1980s or that a second peak may occur sometime around 2035.

As of 2017, identified uranium reserves recoverable at US$130/kg were 6.14 million tons (compared to 5.72 million tons in 2015). At the rate of consumption in 2017, these reserves are sufficient for slightly over 130 years of supply. The identified reserves as of 2017 recoverable at US$260/kg are 7.99 million tons (compared to 7.64 million tons in 2015).

Optimistic predictions of nuclear fuel supply are based upon one of three possible scenarios.

  1. LWRs only consume about half of one percent of their uranium fuel while fast breeder reactors will consume closer to 99%. Currently, more than 80% of the World's reactors are Light Water Reactors (LWRs).
  2. Current reserves of uranium are about 5.3 million tons. Theoretically, 4.5 billion tons of uranium are available from sea water at about 10 times the current price of uranium. Currently no high volume seawater extraction systems exist. The Earth's crust contains approximately 65 trillion tons of uranium, of which about 32 thousand tons flow into oceans per year via rivers, which are themselves fed via geological cycles of erosion, subduction and uplift.
  3. Thorium (3–4 times as abundant as uranium) might be used when supplies of uranium are depleted. However, in 2010, the UK's National Nuclear Laboratory (NNL) concluded that for the short to medium term, "...the thorium fuel cycle does not currently have a role to play," in that it is "technically immature, and would require a significant financial investment and risk without clear benefits," and concluded that the benefits have been "overstated." Currently there are no commercially practical thorium reactors in operation.

If these predictions became reality, it would have the potential to increase the supply of nuclear fuel significantly.

Optimistic predictions claim that the supply is far more than demand and do not predict peak uranium.

Hubbert's peak and uranium

Uranium-235, the fissile isotope of uranium used in nuclear reactors, makes up about 0.7% of uranium from ore. It is the only naturally occurring isotope capable of directly generating nuclear power, and is a finite, non-renewable resource. It is believed that its availability follows M. King Hubbert's peak theory, which was developed to describe peak oil. Hubbert saw oil as a resource which would soon run out, but he believed that uranium had much more promise as an energy source, and that breeder reactors and nuclear reprocessing, which were new technologies at the time, would allow uranium to be a power source for a very long time. The technologies Hubbert envisioned would substantially reduce the rate of depletion of uranium-235, but they are still more costly than the "once-through" cycle, and have not been widely deployed to date. If these and other more costly technologies such as seawater extraction are used, any possible peak would occur in the very distant future.

According to the Hubbert Peak Theory, Hubbert's peaks are the points where production of a resource, has reached its maximum, and from then on, the rate of resource production enters a terminal decline. After a Hubbert's peak, the rate of supply of a resource no longer fulfills the previous demand rate. As a result of the law of supply and demand, at this point the market shifts from a buyer's market to a seller's market.

Many countries are not able to supply their own uranium demands any longer - some of them never were - and must import uranium from other countries. Thirteen countries have hit peak and exhausted their economically recoverable uranium resources at current prices.

In a similar manner to every other natural metal resource, for every tenfold increase in the cost per kilogram of uranium, there is a three-hundredfold increase in available lower quality ores that would then become economical. The theory could be observed in practice during the Uranium bubble of 2007 when an unprecedented price hike led to investments in the development of uranium mining of lower quality deposits which mostly became stranded assets after uranium prices returned to a lower level.

Uranium demand

World consumption of primary energy by energy type in terawatt-hours (TWh)

The world demand for uranium in 1996 was over 68 kilotonnes (150×106 lb) per year, and that number had been expected to increase to between 80 kilotonnes (180×106 lb) and 100 kilotonnes (220×106 lb) per year by 2025 due to the number of new nuclear power plants coming on line. However following the shutdown of many nuclear power plants after the Fukushima Daiichi nuclear disaster in 2011, demand had fallen to about 60 kilotonnes (130×106 lb) in 2015 and rose to 62.8 kilotonnes (138×106 lb) in 2017, with future forecasts uncertain.

According to Cameco Corporation, the demand for uranium is directly linked to the amount of electricity generated by nuclear power plants. Reactor capacity is growing slowly, reactors are being run more productively, with higher capacity factors, and reactor power levels. Improved reactor performance translates into greater uranium consumption.

Nuclear power stations of 1000 megawatt electrical generation capacity require around 200 tonnes (440×103 lb) of natural uranium per year. For example, the United States has 103 operating reactors with an average generation capacity of 950 MWe demanded over 22 kilotonnes (49×106 lb) of natural uranium in 2005. As the number of nuclear power plants increase, so does the demand for uranium.

Another factor to consider is population growth. Electricity consumption is determined in part by economic and population growth. According to data from the CIA's World Factbook, the world population currently (July 2020 est.) is more than 7.7 billion and it is increasing by 1.167% per year. This means a growth of about 211,000 persons every day. According to the UN, by 2050 it is estimated that the Earth's population will be 9.07 billion. 62% of the people will live in Africa, Southern Asia and Eastern Asia. The largest energy-consuming class in the history of earth is being produced in world's most populated countries, China and India. Both plan massive nuclear energy expansion programs. China intends to build 32 nuclear plants with 40,000 MWe capacity by 2020. According to the World Nuclear Association, India plans on bringing 20,000 MWe nuclear capacity on line by 2020, and aims to supply 25% of electricity from nuclear power by 2050. The World Nuclear Association believes nuclear energy could reduce the fossil fuel burden of generating the new demand for electricity.

As more fossil fuels are used to supply the growing energy needs of an increasing population, the more greenhouse gases are produced. Some proponents of nuclear power believe that building more nuclear power plants can reduce greenhouse emissions. For example, the Swedish utility Vattenfall studied the full life cycle emissions of different ways to produce electricity, and concluded that nuclear power produced 3.3 g/kWh of carbon dioxide, compared to 400.0 for natural gas and 700.0 for coal. Another study however shows this figure to be 84–130 g of CO2/kWh, with the figure rising dramatically as less concentrated ores are used in the future. It uses a wider scope for consideration than other studies including dismantling and disposal of the power station. The study assumes diesel oil for the thermal parts of the uranium extraction process.

As some countries are not able to supply their own needs of uranium economically, countries have resorted to importing uranium ore from elsewhere. For example, owners of U.S. nuclear power reactors bought 67 million pounds (30 kt) of natural uranium in 2006. Out of that 84%, or 56 million pounds (25 kt), were imported from foreign suppliers, according to the Energy Department.

Because of the improvements in gas centrifuge technology in the 2000s, replacing former gaseous diffusion plants, cheaper separative work units have enabled the economic production of more enriched uranium from a given amount of natural uranium, by re-enriching tails ultimately leaving a depleted uranium tail of lower enrichment. This has somewhat lowered the demand for natural uranium.

As nuclear power plants take a long time to build and refuelling is undertaken at sporadic, predictable intervals, uranium demand is rather predictable in the short term. It is also less dependent on short-term economic boom-bust cycles as nuclear power has one of strongest fixed costs to variable costs ratios (i.e. The marginal costs of running, rather than leaving idle an already constructed power plant are very low, compared to the capital costs of construction) and it is thus nearly never advisable to leave a nuclear power plant idle for economic reasons. However, nuclear policy can lead to short term fluctuations in demand, as evidenced by the German nuclear phaseout, which was decided upon by the government of Gerhard Schröder (1998-2005) reversed during the second Merkel cabinet (2009-2013) only for a reversal of that reversal to occur as a consequence of the Fukushima nuclear accident, which also led to the temporary shutdown of several German nuclear power plants.

Uranium supply

Uranium occurs naturally in many rocks, and even in seawater. However, like other metals, it is seldom sufficiently concentrated to be economically recoverable. Like any resource, uranium cannot be mined at any desired concentration. No matter the technology, at some point it is too costly to mine lower grade ores. One highly criticized life cycle study by Jan Willem Storm van Leeuwen suggested that below 0.01–0.02% (100–200 ppm) in ore, the energy required to extract and process the ore to supply the fuel, operate reactors and dispose properly comes close to the energy gained by using the uranium as a fissible material in the reactor. Researchers at the Paul Scherrer Institute who analyzed the Jan Willem Storm van Leeuwen paper however have detailed the number of incorrect assumptions of Jan Willem Storm van Leeuwen that led them to this evaluation, including their assumption that all the energy used in the mining of Olympic Dam is energy used in the mining of uranium, when that mine is predominantly a copper mine and uranium is produced only as a co-product, along with gold and other metals. The report by Jan Willem Storm van Leeuwen also assumes that all enrichment is done in the older and more energy intensive gaseous diffusion technology, however the less energy intensive gas centrifuge technology has produced the majority of the world's enriched uranium now for a number of decades.

An appraisal of nuclear power by a team at MIT in 2003, and updated in 2009, have stated that:

Most commentators conclude that a half century of unimpeded growth is possible, especially since resources costing several hundred dollars per kilogram (not estimated in the Red Book) would also be economically usable...We believe that the world-wide supply of uranium ore is sufficient to fuel the deployment of 1000 reactors over the next half century.

In the early days of the nuclear industry, uranium was thought to be very scarce, so a closed fuel cycle would be needed. Fast breeder reactors would be needed to create nuclear fuel for other power producing reactors. In the 1960s, new discoveries of reserves, and new uranium enrichment techniques allayed these concerns.

Mining companies usually consider concentrations greater than 0.075% (750 ppm) as ore, or rock economical to mine at current uranium market prices. There is around 40 trillion tons of uranium in Earth's crust, but most is distributed at low parts per million trace concentration over its 3 * 1019 ton mass. Estimates of the amount concentrated into ores affordable to extract for under $130 per kg can be less than a millionth of that total.

Uranium Grades
Source Concentration
Very high-grade ore – 20% U 200,000 ppm U
High-grade ore – 2% U 20,000 ppm U
Low-grade ore – 0.1% U 1,000 ppm U
Very low-grade ore – 0.01% U 100 ppm U
Granite 4–5 ppm U
Sedimentary rock 2 ppm U
Earth's continental crust (av) 2.8 ppm U
Seawater 0.003 ppm U

According to the OECD Redbook, the world consumed 62.8 kilotonnes (138×106 lb) of uranium in 2017 (compared to 67 kt in 2002). Of that, 59 kt was produced from primary sources, with the balance coming from secondary sources, in particular stockpiles of natural and enriched uranium, decommissioned nuclear weapons, the reprocessing of natural and enriched uranium and the re-enrichment of depleted uranium tails.

Economically extractable reserves of uranium (0.01% ore or better)
Ore concentration tonnes of uranium Ore type
>1% 10000 vein deposits
0.2–1% 2 million pegmatites,unconformity deposits
0.1–0.2% 80 million fossil placers, sandstones
0.02–0.1% 100 million lower grade fossil placers, sandstones
100–200 ppm 2 billion volcanic deposits

The table above assumes the fuel will be used in a LWR burner. Uranium becomes far more economical when used in a fast burner reactor such as the Integral Fast Reactor.

Production

10 countries are responsible for 94% of all uranium extraction.
 
World production of uranium 1995–2006

Peak uranium refers to the peak of the entire planet's uranium production. Like other Hubbert peaks, the rate of uranium production on Earth will enter a terminal decline. According to Robert Vance of the OECD's Nuclear Energy Agency, the world production rate of uranium has already reached its peak in 1980, amounting to 69,683 tonnes (150×106 lb) of U3O8 from 22 countries. However, this is not due to lack of production capacity. Historically, uranium mines and mills around the world have operated at about 76% of total production capacity, varying within a range of 57% and 89%. The low production rates have been largely attributable to excess capacity. Slower growth of nuclear power and competition from secondary supply significantly reduced demand for freshly mined uranium until very recently. Secondary supplies include military and commercial inventories, enriched uranium tails, reprocessed uranium and mixed oxide fuel.

According to data from the International Atomic Energy Agency, world production of mined uranium has peaked twice in the past: once, circa 1960 in response to stockpiling for military use, and again in 1980, in response to stockpiling for use in commercial nuclear power. Up until about 1990, the mined uranium production was in excess of consumption by power plants. But since 1990, consumption by power plants has outstripped the uranium being mined; the deficit being made up by liquidation of the military (through decommissioning of nuclear weapons) and civilian stockpiles. Uranium mining has increased since the mid-1990s, but is still less than the consumption by power plants.

The world's top uranium producers are Kazakhstan (39% of world production), Canada (22%) and Australia (10%). Other major producers include Namibia (6.7%), Niger (6%), and Russia (5%). In 1996, the world produced 39 kilotonnes (86×106 lb) of uranium. In 2005, the world primary mining production was 41,720 tonnes (92×106 lb) of uranium, 62% of the requirements of the power utilities. In 2017 the production had increased to 59,462 tonnes, 93% of the demand. The balance comes from inventories held by utilities and other fuel cycle companies, inventories held by governments, used reactor fuel that has been reprocessed, recycled materials from military nuclear programs and uranium in depleted uranium stockpiles. The plutonium from dismantled Cold War nuclear weapon stockpiles will be exhausted by 2013. The industry is trying to find and develop new uranium mines, mainly in Canada, Australia and Kazakhstan. Those under development in 2006 would fill half the gap.

Of the ten largest uranium mines in the world (Mc Arthur River, Ranger, Rossing, Kraznokamensk, Olympic Dam, Rabbit Lake, Akouta, Arlit, Beverly, and McClean Lake), by 2020, six will be depleted, two will be in their final stages, one will be upgrading and one will be producing.

World primary mining production fell 5% in 2006 over that in 2005. The biggest producers, Canada and Australia saw falls of 15% and 20%, with only Kazakhstan showing an increase of 21%. This can be explained by two major events that have slowed world uranium production. Canada's Cameco mine at Cigar Lake is the largest, highest-grade uranium mine in the world. In 2006 it flooded, and then flooded again in 2008 (after Cameco had spent $43 million – most of the money set aside – to correct the problem), causing Cameco to push back its earliest start-up date for Cigar Lake to 2011. Also, in March 2007, the market endured another blow when a cyclone struck the Ranger mine in Australia, which produces 5,500 tonnes (12×106 lb) of uranium a year. The mine's owner, Energy Resources of Australia, declared force majeure on deliveries and said production would be impacted into the second half of 2007. This caused some to speculate that peak uranium has arrived. In January 2018, McArthur River mine in Canada suspended production, the mine was producing 7000-8000 tonnes of Uranium per year from 2007 to 2017. The mine's owner, Cameco cited low uranium market prices as the reason to halt production and claims ramping production up to normal will take 18–24 months when the decision to re-open the mine is made.

Primary sources

About 96% of the global uranium reserves are found in these ten countries: Australia, Canada, Kazakhstan, South Africa, Brazil, Namibia, Uzbekistan, the United States, Niger, and Russia. Out of those the main producers are Kazakhstan (39% of world production), Canada (22%) and Australia (10%) are the major producers. In 1996, the world produced 39,000 tonnes of uranium, and in 2005, the world produced a peak of 41,720 tonnes of uranium. In 2017 this had increased to 59,462 tonnes, 93% of the world demand.

Various agencies have tried to estimate how long these primary resources will last, assuming a once-through cycle. The European Commission said in 2001 that at the current level of uranium consumption, known uranium resources would last 42 years. When added to military and secondary sources, the resources could be stretched to 72 years. Yet this rate of usage assumes that nuclear power continues to provide only a fraction of the world's energy supply. If electric capacity were increased six-fold, then the 72-year supply would last just 12 years. The world's present measured resources of uranium, economically recoverable at a price of US$130/kg according to the industry groups Organisation for Economic Co-operation and Development (OECD), Nuclear Energy Agency (NEA) and International Atomic Energy Agency (IAEA), are enough to last for "at least a century" at current consumption rates.[62][63] According to the World Nuclear Association, yet another industry group, assuming the world's current rate of consumption at 66,500 tonnes of uranium per year and the world's present measured resources of uranium (4.7–5.5 Mt) are enough to last for some 70–80 years.

Reserves

Reserves are the most readily available resources. Resources that are known to exist and easy to mine are called "Known conventional resources". Resources that are thought to exist but have not been mined are classified under "Undiscovered conventional resources".

The known uranium resources represent a higher level of assured resources than is normal for most minerals. Further exploration and higher prices will certainly, on the basis of present geological knowledge, yield further resources as present ones are used up. There was very little uranium exploration between 1985 and 2005, so the significant increase in exploration effort that we are now seeing could readily double the known economic resources. On the basis of analogies with other metal minerals, a doubling of price from price levels in 2007 could be expected to create about a tenfold increase in measured resources, over time.

Known conventional resources

Known conventional resources are "Reasonably Assured Resources" and "Estimated Additional Resources-I".

In 2006, about 4 million tons of conventional resources were thought to be sufficient at current consumption rates for about six decades (4.06 million tonnes at 65,000 tonnes per year). In 2011, this was estimated to be 7 million tonnes. Exploration for uranium has increased. From 1981 to 2007, annual exploration expenditures grew modestly, from 4 million US$ to 7 million US$. This skyrocketed to US$11 million in 2011. Consumption of uranium runs at around 75 000 t a year. This is less than production, and requires draw down of existing stocks.

About 96% of the global uranium reserves are found in these ten countries: Australia, Canada, Kazakhstan, South Africa, Brazil, Namibia, Uzbekistan, the United States, Niger, and Russia. The world's largest deposits of uranium are found in three countries. Australia has just over 30% of the world's reasonably assured resources and inferred resources of uranium – about 1.673 megatonnes (3.69×109 lb). Kazakhstan has about 12% of the world's reserves, or about 651 kilotonnes (1.4×109 lb). And Canada has 485 kilotonnes (1,100×106 lb) of uranium, representing about 9%.

Several countries in Europe no longer mine uranium (East Germany (1990), France (2001), Spain (2002) and Sweden (1969)); they were not major producers.

Undiscovered conventional resources

Undiscovered conventional resources can be broken up into two classifications "Estimated Additional Resources-II" and "Speculative Resources".

It will take a significant exploration and development effort to locate the remaining deposits and begin mining them. However, since the entire earth's geography has not been explored for uranium at this time, there is still the potential to discover exploitable resources. The OECD Redbook cites areas still open to exploration throughout the world. Many countries are conducting complete aeromagnetic gradiometer radiometric surveys to get an estimate the size of their undiscovered mineral resources. Combined with a gamma-ray survey, these methods can locate undiscovered uranium and thorium deposits. The U.S. Department of Energy conducted the first and only national uranium assessment in 1980 – the National Uranium Resource Evaluation (NURE) program.

Secondary resources

Secondary resources are essentially recovered uranium from other sources such as nuclear weapons, inventories, reprocessing and re-enrichment. Since secondary resources have exceedingly low discovery costs and very low production costs, they may have displaced a significant portion of primary production. Secondary uranium was and is available essentially instantly. However, new primary production will not be. Essentially, secondary supply is a "one-time" finite supply, with the exception of the re-processed fuel.

Uranium mining activity is cyclical, in 2009 80% of the requirements of power utilities were supplied by mines, in 2017 this had risen to 93%. The balance comes from inventories held by utilities and other fuel cycle companies, inventories held by governments, used reactor fuel that has been reprocessed, recycled materials from military nuclear programs and uranium in depleted uranium stockpiles.

The plutonium from dismantled cold war nuclear weapon stockpiles was a major source of nuclear fuel under the "Megatons to Megawatts" program which ended in December 2013. The industry developed new uranium mines, especially in Kazakhstan which now attributes to 31% of the world supply.

Inventories

Inventories are kept by a variety of organizations – government, commercial and others.

The US DOE keeps inventories for security of supply in order to cover for emergencies where uranium is not available at any price. In the event of a major supply disruption, the department may not have sufficient uranium to meet a severe uranium shortage in the United States.

Decommissioning nuclear weapons

Both the US and Russia have committed to recycle their nuclear weapons into fuel for electricity production. This program is known as the Megatons to Megawatts Program. Down blending 500 tonnes (1,100×103 lb) of Russian weapons high enriched uranium (HEU) will result in about 15 kilotonnes (33,000×103 lb) of low enriched uranium (LEU) over 20 years. This is equivalent to about 152 kilotonnes (340×106 lb) of natural U, or just over twice annual world demand. Since 2000, 30 tonnes (66×103 lb) of military HEU is displacing about 10.6 kilotonnes (23×106 lb) of uranium oxide mine production per year which represents some 13% of world reactor requirements.

Plutonium recovered from nuclear weapons or other sources can be blended with uranium fuel to produce a mixed-oxide fuel. In June 2000, the US and Russia agreed to dispose of 34 kilotonnes (75×106 lb) each of weapons-grade plutonium by 2014. The US undertook to pursue a self-funded dual track program (immobilization and MOX). The G-7 nations provided US$1 billion to set up Russia's program. The latter was initially MOX specifically designed for VVER reactors, the Russian version of the Pressurized Water Reactor (PWR), the high cost being because this was not part of Russia's fuel cycle policy. This MOX fuel for both countries is equivalent to about 12 kilotonnes (26×106 lb) of natural uranium. The U.S. also has commitments to dispose of 151 tonnes (330×103 lb) of non-waste HEU.

The Megatons to Megawatts program came to an end in 2013.

Reprocessing and recycling

Nuclear reprocessing, sometimes called recycling, is one method of mitigating the eventual peak of uranium production. It is most useful as part of a nuclear fuel cycle utilizing fast-neutron reactors since reprocessed uranium and reactor-grade plutonium both have isotopic compositions not optimal for use in today's thermal-neutron reactors. Although reprocessing of nuclear fuel is done in a few countries (France, United Kingdom, and Japan) the United States President banned reprocessing in the late 1970s due to the high costs and the risk of nuclear proliferation via plutonium. In 2005, U.S. legislators proposed a program to reprocess the spent fuel that has accumulated at power plants. At present prices, such a program is significantly more expensive than disposing spent fuel and mining fresh uranium.

Currently, there are eleven reprocessing plants in the world. Of these, two are large-scale commercially operated plants for the reprocessing of spent fuel elements from light water reactors with throughputs of more than 1 kilotonne (2.2×106 lb) of uranium per year. These are La Hague, France with a capacity of 1.6 kilotonnes (3.5×106 lb) per year and Sellafield, England at 1.2 kilotonnes (2.6×106 lb) uranium per year. The rest are small experimental plants. The two large-scale commercial reprocessing plants together can reprocess 2,800 tonnes of uranium waste annually.

Most of the spent fuel components can be recovered and recycled. About two-thirds of the U.S. spent fuel inventory is uranium. This includes residual fissile uranium-235 that can be recycled directly as fuel for heavy water reactors or enriched again for use as fuel in light water reactors.

Plutonium and uranium can be chemically separated from spent fuel. When used nuclear fuel is reprocessed using the de facto standard PUREX method, both plutonium and uranium are recovered separately. The spent fuel contains about 1% plutonium. Reactor-grade plutonium contains Pu-240 which has a high rate of spontaneous fission, making it an undesirable contaminant in producing safe nuclear weapons. Nevertheless, nuclear weapons can be made with reactor grade plutonium.

The spent fuel is primarily composed of uranium, most of which has not been consumed or transmuted in the nuclear reactor. At a typical concentration of around 96% by mass in the used nuclear fuel, uranium is the largest component of used nuclear fuel. The composition of reprocessed uranium depends on the time the fuel has been in the reactor, but it is mostly uranium-238, with about 1% uranium-235, 1% uranium-236 and smaller amounts of other isotopes including uranium-232. However, reprocessed uranium is also a waste product because it is contaminated and undesirable for reuse in reactors. During its irradiation in a reactor, uranium is profoundly modified. The uranium that leaves the reprocessing plant contains all the isotopes of uranium between uranium-232 and uranium-238 except uranium-237, which is rapidly transformed into neptunium-237. The undesirable isotopic contaminants are:

  • Uranium-232 (whose decay products emit strong gamma radiation making handling more difficult), and
  • Uranium-234 (which is fertile material but can affect reactivity differently from uranium-238).
  • Uranium-236 (which affects reactivity and absorbs neutrons without fissioning, becoming neptunium-237 which is one of the most difficult isotopes for long-term disposal in a deep geological repository)
  • Daughter products of uranium-232: bismuth-212, thallium-208.

At present, reprocessing and the use of plutonium as reactor fuel is far more expensive than using uranium fuel and disposing of the spent fuel directly – even if the fuel is only reprocessed once. However, nuclear reprocessing becomes more economically attractive, compared to mining more uranium, as uranium prices increase.

The total recovery rate 5 kilotonnes (11×106 lb)/yr from reprocessing currently is only a small fraction compared to the growing gap between the rate demanded 64.615 kilotonnes (142.45×106 lb)/yr and the rate at which the primary uranium supply is providing uranium 46.403 kilotonnes (102.30×106 lb)/yr.

Energy Returned on Energy Invested (EROEI) on uranium reprocessing is highly positive, though not as positive as the mining and enrichment of uranium, and the process can be repeated. Additional reprocessing plants may bring some economies of scale.

The main problems with uranium reprocessing are the cost of mined uranium compared to the cost of reprocessing, nuclear proliferation risks, the risk of major policy change, the risk of incurring large cleanup costs, stringent regulations for reprocessing plants, and the anti-nuclear movement.

Unconventional resources

Unconventional resources are occurrences that require novel technologies for their exploitation and/or use. Often unconventional resources occur in low-concentration. The exploitation of unconventional uranium requires additional research and development efforts for which there is no imminent economic need, given the large conventional resource base and the option of reprocessing spent fuel. Phosphates, seawater, uraniferous coal ash, and some type of oil shales are examples of unconventional uranium resources.

Phosphates

The soaring price of uranium may cause long-dormant operations to extract uranium from phosphate. Uranium occurs at concentrations of 50 to 200 parts per million in phosphate-laden earth or phosphate rock. As uranium prices increase, there has been interest in some countries in extraction of uranium from phosphate rock, which is normally used as the basis of phosphate fertilizers.

Worldwide, approximately 400 wet-process phosphoric acid plants were in operation. Assuming an average recoverable content of 100 ppm of uranium, and that uranium prices do not increase so that the main use of the phosphates are for fertilizers, this scenario would result in a maximum theoretical annual output of 3.7 kilotonnes (8.2×106 lb) U3O8.

Historical operating costs for the uranium recovery from phosphoric acid range from $48–$119/kg U3O8. In 2011, the average price paid for U3O8 in the United States was $122.66/kg.

There are 22 million tons of uranium in phosphate deposits. Recovery of uranium from phosphates is a mature technology; it has been utilized in Belgium and the United States, but high recovery costs limit the utilization of these resources, with estimated production costs in the range of US$60–100/kgU including capital investment, according to a 2003 OECD report for a new 100 tU/year project.

Seawater

Unconventional uranium resources include up to 4,000 megatonnes (8,800×109 lb) of uranium contained in sea water. Several technologies to extract uranium from sea water have been demonstrated at the laboratory scale.

In the mid-1990s extraction costs were estimated at 260 USD/kgU (Nobukawa, et al., 1994) but scaling up laboratory-level production to thousands of tonnes is unproven and may encounter unforeseen difficulties.

One method of extracting uranium from seawater is using a uranium-specific nonwoven fabric as an absorbent. The total amount of uranium recovered in an experiment in 2003 from three collection boxes containing 350 kg of fabric was >1 kg of yellow cake after 240 days of submersion in the ocean. According to the OECD, uranium may be extracted from seawater using this method for about US$300/kgU.

In 2006 the same research group stated: "If 2g-U/kg-adsorbent is submerged for 60 days at a time and used 6 times, the uranium cost is calculated to be 88,000 JPY/kgU, including the cost of adsorbent production, uranium collection, and uranium purification. When an extraction 6g of U per kg of adsorbent and 20 repetitions or more becomes possible, the uranium cost reduces to 15,000 yen. This price level is equivalent to that of the highest cost of the minable uranium. The lowest cost attainable now is 25,000 yen with 4g-U/kg-adsorbent used in the sea area of Okinawa, with 18 repetition uses. In this case, the initial investment to collect the uranium from seawater is 107.7 billion yen, which is 1/3 of the construction cost of a one gigawatt nuclear power plant."

In 2012, ORNL researchers announced the successful development of a new absorbent material dubbed HiCap, which vastly outperforms previous best adsorbents, which perform surface retention of solid or gas molecules, atoms or ions. "We have shown that our adsorbents can extract five to seven times more uranium at uptake rates seven times faster than the world's best adsorbents", said Chris Janke, one of the inventors and a member of ORNL's Materials Science and Technology Division. HiCap also effectively removes toxic metals from water, according to results verified by researchers at Pacific Northwest National Laboratory.

Among the other methods to recover uranium from sea water, two seem promising: algae bloom to concentrate uranium and nanomembrane filtering.

So far, no more than a very small amount of uranium has been recovered from sea water in a laboratory.

Uraniferous coal ash

Annual release of "technologically enhanced"/concentrated Naturally occurring radioactive material, uranium and thorium radioisotopes naturally found in coal and concentrated in heavy/bottom coal ash and airborne fly ash. As predicted by ORNL to cumulatively amount to 2.9 million tons over the 1937–2040 period, from the combustion of an estimated 637 billion tons of coal worldwide.

In particular, nuclear power facilities produce about 200,000 metric tons of low and intermediate level waste (LILW) and 10,000 metric tons of high level waste (HLW) (including spent fuel designated as waste) each year worldwide.

Although only several parts per million average concentration in coal before combustion (albeit more concentrated in ash), the theoretical maximum energy potential of trace uranium and thorium in coal (in breeder reactors) actually exceeds the energy released by burning the coal itself, according to a study by Oak Ridge National Laboratory.

From 1965 to 1967 Union Carbide operated a mill in North Dakota, United States burning uraniferous lignite and extracting uranium from the ash. The plant produced about 150 metric tons of U3O8 before shutting down.

An international consortium has set out to explore the commercial extraction of uranium from uraniferous coal ash from coal power stations located in Yunnan province, China. The first laboratory scale amount of yellowcake uranium recovered from uraniferous coal ash was announced in 2007. The three coal power stations at Xiaolongtang, Dalongtang and Kaiyuan have piled up their waste ash. Initial tests from the Xiaolongtang ash pile indicate that the material contains (160–180 parts per million uranium), suggesting a total of some 2.085 kilotonnes (4.60×106 lb) U3O8 could be recovered from that ash pile alone.

Oil shales

Some oil shales contain uranium, which may be recovered as a byproduct. Between 1946 and 1952, a marine type of Dictyonema shale was used for uranium production in Sillamäe, Estonia, and between 1950 and 1989 alum shale was used in Sweden for the same purpose.

Breeding

A breeder reactor produces more nuclear fuel than it consumes and thus can extend the uranium supply. It typically turns the dominant isotope in natural uranium, uranium-238, into fissile plutonium-239. This results in hundredfold increase in the amount of energy to be produced per mass unit of uranium, because U-238, which constitute 99.3% of natural uranium, is not used in conventional reactors which instead use U-235 which only represent 0.7% of natural uranium. In 1983, physicist Bernard Cohen proposed that the world supply of uranium is effectively inexhaustible, and could therefore be considered a form of renewable energy. He claims that fast breeder reactors, fueled by naturally-replenished uranium-238 extracted from seawater, could supply energy at least as long as the sun's expected remaining lifespan of five billion years, making them as sustainable in fuel availability terms as renewable energy sources. Despite this hypothesis there is no known economically viable method to extract sufficient quantities from sea water. Experimental techniques are under investigation.

There are two types of breeders: Fast breeders and thermal breeders.

Fast breeder

A fast breeder, in addition to consuming U-235, converts fertile U-238 into Pu-239, a fissile fuel. Fast breeder reactors are more expensive to build and operate, including the reprocessing, and could only be justified economically if uranium prices were to rise to pre-1980 values in real terms. About 20 fast-neutron reactors have already been operating, some since the 1950s, and one supplies electricity commercially. Over 300 reactor-years of operating experience have been accumulated. In addition to considerably extending the exploitable fuel supply, these reactors have an advantage in that they produce less long-lived transuranic wastes, and can consume nuclear waste from current light water reactors, generating energy in the process. Several countries have research and development programs for improving these reactors. For instance, one scenario in France is for half of the present nuclear capacity to be replaced by fast breeder reactors by 2050. China, India, and Japan plan large scale utilization of breeder reactors during the coming decades. (Following the crisis at Japan's Fukishima Daiichi nuclear power plant in 2011, Japan is revising its plans regarding future use of nuclear power. (See: Fukushima Daiichi nuclear disaster: Energy policy implications.))

The breeding of plutonium fuel in Fast Breeder Reactors (FBR), known as the plutonium economy, was for a time believed to be the future of nuclear power. But many of the commercial breeder reactors that have been built have been riddled with technical and budgetary problems. Some sources critical of breeder reactors have gone so far to call them the Supersonic Transport of the '80s.

Uranium turned out to be far more plentiful than anticipated, and the price of uranium declined rapidly (with an upward blip in the 1970s). This is why the US halted their use in 1977 and the UK abandoned the idea in 1994.

Fast Breeder Reactors, are called fast because they have no moderator slowing down the neutrons (light water, heavy water or graphite) and breed more fuel than they consume. The word 'fast' in fast breeder thus refers to the speed of the neutrons in the reactor's core. The higher the energy the neutrons have, the higher the breeding ratio or the more uranium that is changed into plutonium.

Significant technical and materials problems were encountered with FBRs, and geological exploration showed that scarcity of uranium was not going to be a concern for some time. By the 1980s, due to both factors, it was clear that FBRs would not be commercially competitive with existing light water reactors. The economics of FBRs still depend on the value of the plutonium fuel which is bred, relative to the cost of fresh uranium. Research continues in several countries with working prototypes Phénix in France, the BN-600 reactor in Russia, and the Monju in Japan.

On February 16, 2006, the United States, France and Japan signed an arrangement to research and develop sodium-cooled fast breeder reactors in support of the Global Nuclear Energy Partnership. Breeder reactors are also being studied under the Generation IV reactor program.

Early prototypes have been plagued with problems. The liquid sodium coolant is highly flammable, bursting into flames if it comes into contact with air and exploding if it comes into contact with water. Japan's fast breeder Monju Nuclear Power Plant has been scheduled to re-open in 2008, 13 years after a serious accident and fire involving a sodium leak. In 1997 France shut down its Superphenix reactor, while the Phenix, built earlier, closed as scheduled in 2009.

At higher uranium prices breeder reactors may be economically justified. Many nations have ongoing breeder research programs. China, India, and Japan plan large scale utilization of breeder reactors during the coming decades. 300 reactor-years experience has been gained in operating them.

As of June 2008 there are only two running commercial breeders and the rate of reactor-grade plutonium production is very small (20 tonnes/yr). The reactor grade plutonium is being processed into MOX fuel. Next to the rate at which uranium is being mined (46,403 tonnes/yr), this is not enough to stave off peak uranium; however, this is only because mined and reprocessed uranium oxide is plentiful and cheap, so breeding new fuel is uneconomical. They can switch to breed large amounts of new fuel as needed, and many more breeding reactors can be built in a short time span.

Thermal breeder

Thorium is an alternate fuel cycle to uranium. Thorium is three times more plentiful than uranium. Thorium-232 is in itself not fissile, but fertile. It can be made into fissile uranium-233 in a breeder reactor. In turn, the uranium-233 can be fissioned, with the advantage that smaller amounts of transuranics are produced by neutron capture, compared to uranium-235 and especially compared to plutonium-239.

Despite the thorium fuel cycle having a number of attractive features, development on a large scale can run into difficulties:

  • The resulting U-233 fuel is expensive to fabricate.
  • The U-233 chemically separated from the irradiated thorium fuel is highly radioactive.
  • Separated U-233 is always contaminated with traces of U-232
  • Thorium is difficult to recycle due to highly radioactive Th-228
  • If the U-233 can be separated on its own, it becomes a weapons proliferation risk
  • And, there are technical problems in reprocessing.

Advocates for liquid core and molten salt reactors such as LFTR claim that these technologies negate the above-mentioned thorium's disadvantages present in solid fueled reactors.

The first successful commercial reactor at the Indian Point power station in Buchanan, New York (Indian Point Unit 1) ran on Thorium. The first core did not live up to expectations.

Indian interest in thorium is motivated by their substantial reserves. Almost a third of the world's thorium reserves are in India. India's Department of Atomic Energy (DAE) says that it will construct a 500 MWe prototype reactor in Kalpakkam. There are plans for four breeder reactors of 500 MWe each - two in Kalpakkam and two more in a yet undecided location.

China has initiated a research and development project in thorium molten-salt breeder reactor technology. It was formally announced at the Chinese Academy of Sciences (CAS) annual conference in January 2011. Its ultimate target is to investigate and develop a thorium based molten salt breeder nuclear system in about 20 years. A 5 MWe research MSR is apparently under construction at Shanghai Institute of Applied Physics (under the academy) with 2015 target operation.

Supply-demand gap

Due to reduction in nuclear weapons stockpiles, a large amount of former weapons uranium was released for use in civilian nuclear reactors. As a result, starting in 1990, a significant portion of uranium nuclear power requirements were supplied by former weapons uranium, rather than newly mined uranium. In 2002, mined uranium supplied only 54 percent of nuclear power requirements. But as the supply of former weapons uranium has been used up, mining has increased, so that in 2012, mining provided 95 percent of reactor requirements, and the OCED Nuclear Energy Agency and the International Atomic Energy Agency projected that the gap in supply would be completely erased in 2013.[

Uranium demand, mining production and deficit
Country Uranium required 2006–08 % of world demand Indigenous mining production 2006 Deficit (-surplus)
 United States 18,918 tonnes (42×106 lb) 29.3% 2,000 tonnes (4.4×106 lb) 16,918 tonnes (37×106 lb)
 France 10,527 tonnes (23×106 lb) 16.3% 0 10,527 tonnes (23×106 lb)
 Japan 7,659 tonnes (17×106 lb) 11.8% 0 7,659 tonnes (17×106 lb)
 Russia 3,365 tonnes (7.4×106 lb) 5.2% 4,009 tonnes (8.8×106 lb) −644 tonnes (−1.4×106 lb)
 Germany 3,332 tonnes (7.3×106 lb) 5.2% 68.03 tonnes (0.1500×106 lb) 3,264 tonnes (7.2×106 lb)
 South Korea 3,109 tonnes (6.9×106 lb) 4.8% 0 3,109 tonnes (6.9×106 lb)
 United Kingdom 2,199 tonnes (4.8×106 lb) 3.4% 0 2,199 tonnes (4.8×106 lb)
Rest of the World 15,506 tonnes (34×106 lb) 24.0% 40,327 tonnes (89×106 lb) −24,821 tonnes (−55×106 lb)
Total 64,615 tonnes (140×106 lb) 100.0% 46,403 tonnes (100×106 lb) 18,211 tonnes (40×106 lb)

For individual nations

Eleven countries, Germany, the Czech Republic, France, DR Congo, Gabon, Bulgaria, Tajikistan, Hungary, Romania, Spain, Portugal and Argentina, have seen uranium production peak, and rely on imports for their nuclear programs. Other countries have reached their peak production of uranium and are currently on a decline.

  • Germany – Between 1946 and 1990, SDAG Wismut, the former East German uranium mining company, produced a total of around 220 kilotonnes (490×106 lb) of uranium. During its peak, production exceeded 7 kilotonnes (15×106 lb) per year. In 1990, uranium mining was discontinued as a consequence of the German unification. The company could not compete on the world market. The production cost of its uranium was three times the world market price. West Germany remained a net uranium importer throughout its existence but ran a small scale uranium mine at Menzenschwand in the Black Forest called Krunkelbach Pit which was closed at the end of the Cold War
  • India – having already hit its production peak, India is finding itself in making a tough choice between using its modest and dwindling uranium resources as a source to keep its weapons programs rolling or it can use them to produce electricity. Since India has abundant thorium reserves, it is switching to nuclear reactors powered by the thorium fuel cycle.
  • Sweden – Sweden started uranium production in 1965 but was never profitable. They stopped mining uranium in 1969. Sweden then embarked on a massive project based on American light water reactors. Nowadays, Sweden imports its uranium mostly from Canada, Australia and the former Soviet Union.
  • UK – 1981: The UK's uranium production peaked in 1981 and the supply is running out. Yet the UK still plans to build more nuclear power plants.
  • France – 1988: In France uranium production attained a peak of 3,394 tonnes (7.5×106 lb) in 1988. At the time, this was enough for France to meet the half of its reactor demand from domestic sources. By 1997, production was 1/5 of the 1991 levels. France markedly reduced its market share since 1997. In 2002, France ran out of uranium.
US uranium production peaked in 1960, and again in 1980 (US Energy Information Administration)
  • U.S. – 1980: The United States was the world's leading producer of uranium from 1953 until 1980, when annual US production peaked at 16,810 tonnes (37×106 lb) (U3O8) according to the OECD redbook. According to the CRB yearbook, US production the peak was at 19,822 tonnes (44×106 lb). The U.S. production hit another maximum in 1996 at 6.3 million pounds (2.9 kt) of uranium oxide (U3O8), then dipped in production for a few years. Between 2003 and 2007, there has been a 125% increase in production as demand for uranium has increased. However, as of 2008, production levels have not come back to 1980 levels.
Uranium mining production in the United States
Year 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
U3O8 (Mil lb) 3.1 3.4 6.0 6.3 5.6 4.7 4.6 4.0 2.6 2.3 2.0 2.3 2.7 4.1 4.5 3.9 4.1
U3O8 (tonnes) 1,410 1,540 2,700 2,860 2,540 2,130 2,090 1,800 1,180 1,040 910 1,040 1,220 1,860 2,040 1,770 1,860

Uranium mining declined with the last open pit mine shutting down in 1992 (Shirley Basin, Wyoming). United States production occurred in the following states (in descending order): New Mexico, Wyoming, Colorado, Utah, Texas, Arizona, Florida, Washington, and South Dakota. The collapse of uranium prices caused all conventional mining to cease by 1992. "In-situ" recovery or ISR has continued primarily in Wyoming and adjacent Nebraska as well has recently restarted in Texas.

  • Canada – 1959, 2001?: The first phase of Canadian uranium production peaked at more than 12 kilotonnes (26×106 lb) in 1959. The 1970s saw renewed interest in exploration and resulted in major discoveries in northern Saskatchewan's Athabasca Basin. Production peaked its uranium production a second time at 12,522 tonnes (28×106 lb) in 2001. Experts believe that it will take more than ten years to open new mines.

World peak uranium

Historical opinions of world uranium supply limits

In 1943, Alvin M. Weinberg et al. believed that there were serious limitations on nuclear energy if only U-235 were used as a nuclear power plant fuel. They concluded that breeding was required to usher in the age of nearly endless energy.

In 1956, M. King Hubbert declared world fissionable reserves adequate for at least the next few centuries, assuming breeding and reprocessing would be developed into economical processes.

In 1975 the US Department of the Interior, Geological Survey, distributed the press release "Known US Uranium Reserves Won't Meet Demand". It was recommended that the US not depend on foreign imports of uranium.

Pessimistic predictions

"We could use up all the uranium fuel we've found by as soon as 1989."
Panel from All-Atomic Comics (1976) citing pessimistic uranium supply predictions as an argument against nuclear power.

All the following sources predict peak uranium:

  • Edward Steidle, Dean of the School of Mineral Industries at Pennsylvania State College, predicted in 1952 that supplies of fissionable elements were too small to support commercial-scale energy production.
  • 1980 Robert Vance while looking back at 40 years of uranium production through all of the Red Books, found that peak global production was achieved in 1980 at 69,683 tonnes (150×106 lb) from 22 countries. In 2003, uranium production totaled 35,600 tonnes (78×106 lb) from 19 countries.
  • 1981 Michael Meacher, the former environment minister of the UK 1997–2003, and UK Member of Parliament, reports that peak uranium happened in 1981. He also predicts a major shortage of uranium sooner than 2013 accompanied with hoarding and its value pushed up to the levels of precious metals.
  • 1989–2015 M. C. Day projected that uranium reserves could run out as soon as 1989, but, more optimistically, would be exhausted by 2015.
  • 2034 Jan Willem Storm van Leeuwen, an independent analyst with Ceedata Consulting, contends that supplies of the high-grade uranium ore required to fuel nuclear power generation will, at current levels of consumption, last to about 2034. Afterwards, the cost of energy to extract the uranium will exceed the price the electric power provided.
  • 2035 The Energy Watch Group has calculated that, even with steep uranium prices, uranium production will have reached its peak by 2035 and that it will only be possible to satisfy the fuel demand of nuclear plants until then.

Various agencies have tried to estimate how long these resources will last.

  • The European Commission said in 2001 that at the current level of uranium consumption, known uranium resources would last 42 years. When added to military and secondary sources, the resources could be stretched to 72 years. Yet this rate of usage assumes that nuclear power continues to provide only a fraction of the world's energy supply. If electric capacity were increased six-fold, then the 72-year supply would last just 12 years.
  • OECD: The world's present measured resources of uranium, economically recoverable at a price of US$130/kg according to the industry groups OECD, NEA and IAEA, are enough to last for 100 years at current consumption.
  • According to the Australian Uranium Association, yet another industry group, assuming the world's current rate of consumption at 66,500 tonnes of uranium per year and the world's present measured resources of uranium (4.7 Mt) are enough to last for 70 years.

Optimistic predictions

All the following references claim that the supply is far more than demand. Therefore, they do not predict peak uranium.

  • In his 1956 landmark paper, M. King Hubbert wrote "There is promise, however, provided mankind can solve its international problems and not destroy itself with nuclear weapons, and provided world population (which is now expanding at such a rate as to double in less than a century) can somehow be brought under control, that we may at last have found an energy supply adequate for our needs for at least the next few centuries of the 'foreseeable future.'" Hubbert's study assumed that breeder reactors would replace light water reactors and that uranium would be bred into plutonium (and possibly thorium would be bred into uranium). He also assumed that economic means of reprocessing would be discovered. For political, economic and nuclear proliferation reasons, the plutonium economy never materialized. Without it, uranium is used up in a once-through process and will peak and run out much sooner. However, at present, it is generally found to be cheaper to mine new uranium out of the ground than to use reprocessed uranium, and therefore the use of reprocessed uranium is limited to only a few nations.
  • The OECD estimates that with the world nuclear electricity generating rates of 2002, with LWR, once-through fuel cycle, there are enough conventional resources to last 85 years using known resources and 270 years using known and as yet undiscovered resources. With breeders, this is extended to 8,500 years.

If one is willing to pay $300/kg for uranium, there is a vast quantity available in the ocean. It is worth noting that since fuel cost only amounts to a small fraction of nuclear energy total cost per kWh, and raw uranium price also constitutes a small fraction of total fuel costs, such an increase on uranium prices wouldn't involve a very significant increase in the total cost per kWh produced.

  • In 1983, physicist Bernard Cohen proposed that uranium is effectively inexhaustible, and could therefore be considered a renewable source of energy. He claims that fast breeder reactors, fueled by naturally replenished uranium extracted from seawater, could supply energy at least as long as the sun's expected remaining lifespan of five billion years. While uranium is a finite mineral resource within the earth, the hydrogen in the sun is finite too – thus, if the resource of nuclear fuel can last over such time scales, as Cohen contends, then nuclear energy is every bit as sustainable as solar power or any other source of energy, in terms of sustainability over the time scale of life surviving on this planet.

We thus conclude that all the world’s energy requirements for the remaining 5×109 yr of existence of life on Earth could be provided by breeder reactors without the cost of electricity rising by as much as 1% due to fuel costs. This is consistent with the definition of a "renewable" energy source in the sense in which that term is generally used.

His paper assumes extraction of uranium from seawater at the rate of 16 kilotonnes (35×106 lb) per year of uranium. The current demand for uranium is near 70 kilotonnes (150×106 lb) per year; however, the use of breeder reactors means that uranium would be used at least 60 times more efficiently than today.

  • James Hopf, a nuclear engineer writing for American Energy Independence in 2004, believes that there is several hundred years' supply of recoverable uranium even for standard reactors. For breeder reactors, "it is essentially infinite".

All the following references claim that the supply is far more than demand. Therefore, they believe that uranium will not deplete in the foreseeable future.

  • The IAEA estimates that using only known reserves at the current rate of demand and assuming a once-through nuclear cycle that there is enough uranium for at least 100 years. However, if all primary known reserves, secondary reserves, undiscovered and unconventional sources of uranium are used, uranium will be depleted in 47,000 years.
  • Kenneth S. Deffeyes estimates that if one can accept ore one tenth as rich then the supply of available uranium increased 300 times. His paper shows that uranium concentration in ores is log-normal distributed. There is relatively little high-grade uranium and a large supply of very low grade uranium.
  • Ernest Moniz, a professor at the Massachusetts Institute of Technology and the former United States Secretary of Energy, testified in 2009 that an abundance of uranium had put into question plans to reprocess spent nuclear fuel. The reprocessing plans dated from decades previous, when uranium was thought to be scarce. But now, "roughly speaking, we’ve got uranium coming out of our ears, for a long, long time," Professor Moniz said.

Possible effects and consequences

As uranium production declines, uranium prices would be expected to increase. However, the price of uranium makes up only 9% of the cost of running a nuclear power plant, much lower than the cost of coal in a coal-fired power plant (77%), or the cost of natural gas in a gas-fired power plant (93%).

Uranium is different from conventional energy resources, such as oil and coal, in several key aspects. Those differences limit the effects of short-term uranium shortages, but most have no bearing on the eventual depletion. Some key features are:

  • The uranium market is diverse, and no country has a monopoly influence on its prices.
  • Thanks to the extremely high energy density of uranium, stockpiling of several years' worth of fuel is feasible.
  • Significant secondary supplies of already mined uranium exist, including decommissioned nuclear weapons, depleted uranium tails suitable for reenrichment, and existing stockpiles.
  • Vast amounts of uranium, roughly 800 times the known reserves of mined uranium, are contained in extremely dilute concentrations in seawater.
  • Introduction of fast neutron reactors, combined with seawater uranium extraction, would make the uranium supply virtually inexhaustible. There are currently seven experimental fast neutron reactors running globally, in India, Japan, Russia and China.

Fast neutron reactors (breeder reactors) could utilize large amounts of Uranium-238 indirectly by conversion to Plutonium-239, rather than fissioning primarily just Uranium-235 (which is 0.7% of original mined uranium), for approximately a factor of 100 increase in uranium usage efficiency. Intermediate between conventional estimates of reserves and the 40 trillion tons total of uranium in Earth's crust (trace concentrations adding up over its 3 * 1019 ton mass), there are ores of lower grade than otherwise practical but of still higher concentration than the average rock. Accordingly, resource figures depend on economic and technological assumptions.

Uranium price

Monthly uranium spot price in US$.

The uranium spot price has increased from a low in Jan 2001 of US$6.40 per pound of U3O8 to a peak in June 2007 of US$135. The uranium prices have dropped substantially since. Currently (15 July 2013) the uranium spot is US$38.

The high price in 2007 resulted from shrinking weapons stockpiles and a flood at the Cigar Lake Mine, coupled with expected rises in demand due to more reactors coming online, leading to a uranium price bubble. Miners and Utilities are bitterly divided on uranium prices.

As prices go up, production responds from existing mines, and production from newer, harder to develop or lower quality uranium ores begins. Currently, much of the new production is coming from Kazakhstan. Production expansion is expected in Canada and in the United States. However, the number of projects waiting in the wings to be brought online now are far less than there were in the 1970s. There have been some encouraging signs that production from existing or planned mines is responding or will respond to higher prices. The supply of uranium has recently become very inelastic. As the demand increases, the prices respond dramatically.

As of 2018 the price of nuclear fuel was stable at around US$38.81 per pound, 81 cents more than in 2013 and 1 cent more than in 2017, way lower than inflation. At such a low and stable price, breeding is uneconomical.

Number of contracts

Unlike other metals such as gold, silver, copper or nickel, uranium is not widely traded on an organized commodity exchange such as the London Metal Exchange. It is traded on the NYMEX but on very low volume. Instead, it is traded in most cases through contracts negotiated directly between a buyer and a seller. The structure of uranium supply contracts varies widely. The prices are either fixed or based on references to economic indices such as GDP, inflation or currency exchange. Contracts traditionally are based on the uranium spot price and rules by which the price can escalate. Delivery quantities, schedules, and prices vary from contract to contract and often from delivery to delivery within the term of a contract.

Since the number of companies mining uranium is small, the number of available contracts is also small. Supplies are running short due to flooding of two of the world's largest mines and a dwindling amount of uranium salvaged from nuclear warheads being removed from service. While demand for the metal has been steady for years, the price of uranium is expected to surge as a host of new nuclear plants come online.

Mining

Rising uranium prices draw investments into new uranium mining projects. Mining companies are returning to abandoned uranium mines with new promises of hundreds of jobs and millions in royalties. Some locals want them back. Others say the risk is too great, and will try to stop those companies "until there's a cure for cancer."

Electric utilities

Since many utilities have extensive stockpiles and can plan many months in advance, they take a wait-and-see approach on higher uranium costs. In 2007, spot prices rose significantly due to announcements of planned reactors or new reactors coming online. Those trying to find uranium in a rising cost climate are forced to face the reality of a seller's market. Sellers remain reluctant to sell significant quantities. By waiting longer, sellers expect to get a higher price for the material they hold. Utilities on the other hand, are very eager to lock up long-term uranium contracts.

According to the NEA, the nature of nuclear generating costs allows for significant increases in the costs of uranium before the costs of generating electricity significantly increase. A 100% increase in uranium costs would only result in a 5% increase in electric cost. This is because uranium has to be converted to gas, enriched, converted back to yellow cake and fabricated into fuel elements. The cost of the finished fuel assemblies are dominated by the processing costs, not the cost of the raw materials. Furthermore, the cost of electricity from a nuclear power plant is dominated by the high capital and operating costs, not the cost of the fuel. Nevertheless, any increase in the price of uranium is eventually passed on to the consumer either directly or through a fuel surcharge. As of 2020, this has not happened and the price of nuclear fuel is low enough to make breeding uneconomical.

Substitutes

An alternative to uranium is thorium which is three times more common than uranium. Fast breeder reactors are not needed. Compared to conventional uranium reactors, thorium reactors using the thorium fuel cycle may produce some 40 times the amount of energy per unit of mass. However, creating the technology, infrastructure and know-how needed for a thorium-fuel economy is uneconomical at current and predicted uranium prices.

If nuclear power prices rise too quickly, or too high, power companies may look for substitutes in fossil energy (coal, oil, and gas) and/or renewable energy, such as hydro, bio-energy, solar thermal electricity, geothermal, wind, tidal energy. Both fossil energy and some renewable electricity sources (e.g. hydro, bioenergy, solar thermal electricity and geothermal) can be used as base-load.

Earth's energy budget

From Wikipedia, the free encyclopedia

Earth's climate is largely determined by the planet's energy budget, i.e., the balance of incoming and outgoing radiation. It is measured by satellites and shown in W/m2. The imbalance (or rate of global heating; shown in figure as the "net absorbed" amount) grew from +0.6 W/m2 (2009 est.) to above +1.0 W/m2 in 2019.

Earth's energy budget accounts for the balance between the energy that Earth receives from the Sun and the energy the Earth loses back into outer space. Smaller energy sources, such as Earth's internal heat, are taken into consideration, but make a tiny contribution compared to solar energy. The energy budget also accounts for how energy moves through the climate system. Because the Sun heats the equatorial tropics more than the polar regions, received solar irradiance is unevenly distributed. As the energy seeks equilibrium across the planet, it drives interactions in Earth's climate system, i.e., Earth's water, ice, atmosphere, rocky crust, and all living things. The result is Earth's climate.

Earth's energy budget depends on many factors, such as atmospheric aerosols, greenhouse gases, the planet's surface albedo (reflectivity), clouds, vegetation, land use patterns, and more. When the incoming and outgoing energy fluxes are in balance, Earth is in radiative equilibrium and the climate system will be relatively stable. Global warming occurs when earth receives more energy than it gives back to space, and global cooling takes place when the outgoing energy is greater. Multiple types of measurements and observations show a warming imbalance since at least year 1970. The rate of heating from this human-caused event is without precedent.

When the energy budget changes, there is a delay before average global surface temperature changes significantly. This is due to the thermal inertia of the oceans, land and cryosphere. Accurate quantification of these energy flows and storage amounts is a requirement within most climate models.

Earth's energy flows

In spite of the enormous transfers of energy into and from the Earth, it maintains a relatively constant temperature because, as a whole, there is little net gain or loss: Earth emits via atmospheric and terrestrial radiation (shifted to longer electromagnetic wavelengths) to space about the same amount of energy as it receives via solar insolation (all forms of electromagnetic radiation).

Incoming solar energy (shortwave radiation)

The total amount of energy received per second at the top of Earth's atmosphere (TOA) is measured in watts and is given by the solar constant times the cross-sectional area of the Earth corresponded to the radiation. Because the surface area of a sphere is four times the cross-sectional area of a sphere (i.e. the area of a circle), the globally and yearly averaged TOA flux is one quarter of the solar constant and so is approximately 340 watts per square meter (W/m2). Since the absorption varies with location as well as with diurnal, seasonal and annual variations, the numbers quoted are multi-year averages obtained from multiple satellite measurements.

Of the ~340 W/m2 of solar radiation received by the Earth, an average of ~77 W/m2 is reflected back to space by clouds and the atmosphere and ~23 W/m2 is reflected by the surface albedo, leaving ~240 W/m2 of solar energy input to the Earth's energy budget. This amount is called the absorbed solar radiation (ASR). It implies a value of about 0.3 for the mean net albedo of Earth, also called its Bond albedo (A):

Outgoing longwave radiation

Outgoing longwave radiation (OLR) is usually defined as outgoing energy leaving the planet, most of which is in the infrared band. Generally, absorbed solar energy is converted to different forms of heat energy. Some of this energy is emitted as OLR directly to space, while the rest is first transported through the climate system as radiant and other forms of thermal energy. For example, indirect emissions occur following heat transport from the planet's surface layers (land and ocean) to the atmosphere via evapotranspiration and latent heat fluxes or conduction/convection processes. Ultimately, all of outgoing energy is radiated in the form of longwave radiation back into space.

The transport of OLR from Earth's surface through its multi-layered atmosphere follows Kirchoff's law of thermal radiation. A one-layer model produces an approximate description of OLR which yields temperatures at the surface (Ts=288 Kelvin) and at the middle of the troposphere (Ta=242 Kelvin) that are close to observed average values:

In this expression σ is the Stefan-Boltzmann constant and ε represents the emissivity of the atmosphere. Aerosols, clouds, water vapor, and trace greenhouse gases contribute to an average value of about ε=0.78. The strong (fourth-power) temperature sensitivity acts to help maintain a near-balance of the outgoing energy flow to the incoming flow via small changes in the planet's absolute temperatures.

Earth's internal heat sources and other small effects

The geothermal heat flow from the Earth's interior is estimated to be 47 terawatts (TW) and split approximately equally between radiogenic heat and heat left over from the Earth's formation. This corresponds to an average flux of 0.087 W/m2 and represents only 0.027% of Earth's total energy budget at the surface, being dwarfed by the 173,000 TW of incoming solar radiation.

Human production of energy is even lower at an estimated 160,000 TW-hr for all of year 2019. This corresponds to an average continuous heat flow of about 18 TW. However, consumption is growing rapidly and energy production with fossil fuels also produces an increase in atmospheric greenhouse gases, leading to a more than 20 times larger imbalance in the incoming/outgoing flows that originate from solar radiation.

Photosynthesis also has a significant effect: An estimated 140 TW (or around 0.08%) of incident energy gets captured by photosynthesis, giving energy to plants to produce biomass. A similar flow of thermal energy is released over the course of a year when plants are used as food or fuel.

Other minor sources of energy are usually ignored in the calculations, including accretion of interplanetary dust and solar wind, light from stars other than the Sun and the thermal radiation from space. Earlier, Joseph Fourier had claimed that deep space radiation was significant in a paper often cited as the first on the greenhouse effect.

Budget analysis

A Sankey diagram illustrating a balanced example of Earth's energy budget. Line thickness is linearly proportional to relative amount of energy.

In simplest terms, Earth's energy budget is balanced when the incoming flow equals the outgoing flow. Since a portion of incoming energy is directly reflected, the balance can also be stated as absorbed incoming solar (shortwave) radiation equal to outgoing longwave radiation:

Internal flow analysis

To describe some of the internal flows within the budget, let the insolation received at the top of the atmosphere be 100 units (=340 W/m2), as shown in the accompanying Sankey diagram. Called the albedo of Earth, around 35 units in this example are directly reflected back to space: 27 from the top of clouds, 2 from snow and ice-covered areas, and 6 by other parts of the atmosphere. The 65 remaining units (ASR=220 W/m2) are absorbed: 14 within the atmosphere and 51 by the Earth's surface.

The 51 units reaching and absorbed by the surface are emitted back to space through various forms of terrestrial energy: 17 directly radiated to space and 34 absorbed by the atmosphere (19 through latent heat of vaporisation, 9 via convection and turbulence, and 6 as absorbed infrared by greenhouse gases). The 48 units absorbed by the atmosphere (34 units from terrestrial energy and 14 from insolation) are then finally radiated back to space. This simplified example neglects some details of mechanisms that recirculate, store, and thus lead to further buildup of heat near the surface.

Ultimately the 65 units (17 from the ground and 48 from the atmosphere) are emitted as OLR. They approximately balance the 65 units (ASR) absorbed from the sun in order to maintain a net-zero gain of energy by Earth.

Role of the greenhouse effect

The greenhouse effect traps infrared heat, and ultimately raises Earth's surface temperatures.
 

The major atmospheric gases (oxygen and nitrogen) are transparent to incoming sunlight but are also transparent to outgoing longwave (thermal/infrared) radiation. However, water vapor, carbon dioxide, methane and other trace gases are opaque to many wavelengths of thermal radiation.

When greenhouse gas molecules absorb thermal infrared energy, their temperature rises. Those gases then radiate an increased amount of thermal infrared energy in all directions. Heat radiated upward continues to encounter greenhouse gas molecules; those molecules also absorb the heat, and their temperature rises and the amount of heat they radiate increases. The atmosphere thins with altitude, and at roughly 5–6 kilometres, the concentration of greenhouse gases in the overlying atmosphere is so thin that heat can escape to space.

Because greenhouse gas molecules radiate infrared energy in all directions, some of it spreads downward and ultimately returns to the Earth's surface, where it is absorbed. Earth's in-situ surface temperatures are thus higher than they would be if governed only by direct solar heating. This supplemental heating is the natural greenhouse effect. It is as if the Earth is covered by a blanket that allows high frequency radiation (sunlight) to enter, but slows the rate at which the longwave infrared radiation leaves.

As viewed from Earth's surrounding space, greenhouse gases influence the planet's atmospheric emissivity (ε). Changes in atmospheric composition can thus shift the overall radiation balance. For example, an increase in heat trapping by a growing concentration of greenhouse gases (i.e. an enhanced greenhouse effect) forces a decrease in OLR and a warming (restorative) energy imbalance. Ultimately when the amount of greenhouse gases increases or decreases, in-situ surface temperatures rise or fall until the ASR = OLR balance is again achieved.

Heat storage reservoirs

The rising accumulation of energy in the oceanic, land, ice, and atmospheric components of Earth's climate system since 1960.

Land, ice, and oceans are active material constituents of Earth's climate system along with the atmosphere. They have far greater mass and heat capacity, and thus much more thermal inertia. When radiation is directly absorbed or the surface temperature changes, thermal energy will flow as sensible heat either into or out of the bulk mass of these components via conduction/convection heat transfer processes. The transformation of water between its solid/liquid/vapor states also acts as a source or sink of potential energy in the form of latent heat. These processes buffer the surface conditions against some of the rapid radiative changes in the atmosphere. As a result, the daytime versus nighttime difference in surface temperatures is relatively small. Likewise, Earth's climate system as a whole shows a delayed response to shifts in the atmospheric radiation balance.

The top few meters of Earth's oceans harbor more thermal energy than its entire atmosphere. Like atmospheric gases, fluidic ocean waters transport vast amounts of such energy over the planet's surface. Sensible heat also moves into and out of great depths under conditions that favor downwelling or upwelling.

Over 90 percent of the extra energy that has accumulated on Earth from ongoing global warming since 1970 has been stored in the ocean. About one-third has propagated to depths below 700 meters. The overall rate of growth has also risen during recent decades, reaching close to 500 TW (1 W/m2) as of 2020. That led to about 14 zettajoules (ZJ) of heat gain for the year, exceeding the 570 exajoules (=160,000 TW-hr) of total primary energy consumed by humans by a factor of at least 20.

Heating/cooling rate analysis

Generally speaking, changes to Earth's energy flux balance can be thought of as being the result of external forcings (both natural and anthropogenic, radiative and non-radiative), system feedbacks, and internal system variability. Such changes are primarily expressed as observable shifts in temperature (T), clouds (C), water vapor (W), aerosols (A), trace greenhouse gases (G), land/ocean/ice surface reflectance (S), and as minor shifts in insolaton (I) among other possible factors. Earth's heating/cooling rate can then be analyzed over selected timeframes (Δt) as the net change in energy (ΔE) associated with these attributes:

Here the term ΔET is negative-valued when temperature rises due to the strong direct influence on OLR.

The recent increase in trace greenhouse gases produces an enhanced greenhouse effect, and thus a positive ΔEG forcing term. By contrast, a large volcanic eruption (e.g. Mount Pinatubo 1991, El Chichón 1982) can inject sulfur-containing compounds into the upper atmosphere. High concentrations of stratospheric sulfur aerosols may persist for up to a few years, yielding a negative forcing contribution to ΔEA. Various other types of anthropogenic aerosol emissions make both positive and negative contributions to ΔEA. Solar cycles produce ΔEI smaller in magnitude than those of recent ΔEG trends from human activity.

Climate forcings are complex since they can produce direct and indirect feedbacks that intensify (positive feedback) or weaken (negative feedback) the original forcing. These often follow the temperature response. Water vapor trends as a positive feedback with respect to temperature changes due to evaporation shifts and the Clausius-Clapeyron relation. An increase in water vapor results in positive ΔEW due to further enhancement of the greenhouse effect. A slower positive feedback is the ice-albedo feedback. For example, the loss of Arctic ice due to rising temperatures makes the region less reflective, leading to greater absorption of energy and even faster ice melt rates, thus positive influence on ΔES. Collectively, feedbacks tend to amplify global warming or cooling.

Clouds are responsible for about half of Earth's albedo and are powerful expressions of internal variability of the climate system. They may also act as feedbacks to forcings, and could be forcings themselves if for example a result of cloud seeding activity. Contributions to ΔEC vary regionally and depending upon cloud type. Measurements from satellites are gathered in concert with simulations from models in the effort to improve understanding and reduce uncertainty.

Earth's energy imbalance

The growth in Earth's energy imbalance from satellite and in situ measurements (2005–2019). A rate of +1.0 W/m2 summed over the planet's surface equates to a continuous heat uptake of about 500 terawatts (~0.3% of the incident solar radiation).
 

If Earth's incoming energy flux is larger or smaller than the outgoing energy flux, then the planet will gain (warm) or lose (cool) net heat energy in accordance with the law of energy conservation:

When Earth's energy imbalance (EEI) shifts by a sufficiently large amount, it is directly measurable by orbiting satellite-based radiometric instruments. Imbalances which fail to reverse over time will also drive long-term temperature changes in the atmospheric, oceanic, land, and ice components of the climate system. In situ temperature changes and related effects thus provide indirect measures of EEI. From mid-2005 to mid-2019, satellite and ocean temperature observations have each independently shown an approximate doubling of the (global) warming imbalance in Earth's energy budget.

Direct measurement

Several satellites directly measure the energy absorbed and radiated by Earth, and thus by inference the energy imbalance. The NASA Earth Radiation Budget Experiment (ERBE) project involves three such satellites: the Earth Radiation Budget Satellite (ERBS), launched October 1984; NOAA-9, launched December 1984; and NOAA-10, launched September 1986.

NASA's Clouds and the Earth's Radiant Energy System (CERES) instruments are part of its Earth Observing System (EOS) since 1998. CERES is designed to measure both solar-reflected (short wavelength) and Earth-emitted (long wavelength) radiation. Analysis of CERES data by its principal investigators showed an increasing trend in EEI from +0.42±0.48 W/m2 in 2005 to +1.12±0.48 W/m2 in 2019. Contributing factors included more water vapor, less clouds, increasing greenhouse gases, and declining ice that were partially offset by rising temperatures. Subsequent investigation of the behavior using the GFDL CM4/AM4 climate model concluded there was a less than 1% chance that internal climate variability alone caused the trend.

Other researchers have used data from CERES, AIRS, CloudSat, and other EOS instruments to look for trends of radiative forcing embedded within the EEI data. Their analysis showed a forcing rise of +0.53±0.11 W/m2 from years 2003 to 2018. About 80% of the increase was associated with the rising concentration of greenhouse gases which reduced the outgoing longwave radiation.

Further satellite measurements including TRMM and CALIPSO data have indicated additional precipitation, which is sustained by increased energy leaving the surface through evaporation (the latent heat flux), offsetting some of the increase in the longwave greenhouse flux to the surface.

It is noteworthy that radiometric calibration uncertainties limit the capability of the current generation of satellite-based instruments, which are otherwise stable and precise. As a result, relative changes in EEI are quantifiable with an accuracy which is not also achievable for any single measurement of the absolute imbalance.

In situ measurements

Global surface temperature (GST) is calculated by averaging temperatures measured at the surface of the sea along with air temperatures measured over land. Reliable data extending to at least 1880 shows that GST has undergone a steady increase of about 0.18°C per decade since about year 1970.

Ocean waters are especially effective absorbents of solar energy and have far greater total heat capacity than the atmosphere. Research vessels and stations have sampled sea temperatures at depth and around the globe since before 1960. Additionally after year 2000, an expanding network of over 3000 Argo robotic floats has measured the temperature anomaly, or equivalently the change in ocean heat content (OHC). Since at least 1990, OHC has increased at a steady or accelerating rate. Changes in OHC provide the most robust indirect measure of EEI since the oceans take up 90% of the excess heat.

The extent of floating and grounded ice is measured by satellites, while the change in mass is then inferred from measured changes in sea level in concert with computational models that account for thermal expansion and other factors. Observations since 1994 show that ice has retreated from every part of Earth at an accelerating rate.

GST since 1850
 
OHC since 1958 in the top 2000 meters
 
Global ice loss since 1994

Importance as a climate change metric

Schematic drawing of Earth's excess heat inventory as it relates to the planet's energy imbalance for two recent time periods.

Climate researchers Kevin Trenberth, James Hansen, and colleagues have identified the monitoring of Earth's energy imbalance as an imperative to help policymakers guide the pace of planning for climate change adaptation. Because of climate system inertia, longer-term EEI trends can forecast further changes that are "in the pipeline".

In 2012, NASA scientists reported that to stop global warming atmospheric CO2 concentration would have to be reduced to 350 ppm or less, assuming all other climate forcings were fixed. As of 2020, atmospheric CO2 reached 415 ppm and all long-lived greenhouse gases exceeded a 500 ppm CO2-equivalent concentration due to continued growth in human emissions.

Flood control in the Netherlands

From Wikipedia, the free encyclopedia
 
Without dikes, the Netherlands would be flooded to this extent.

Flood control is an important issue for the Netherlands, as due to its low elevation, approximately two thirds of its area is vulnerable to flooding, while the country is densely populated. Natural sand dunes and constructed dikes, dams, and floodgates provide defense against storm surges from the sea. River dikes prevent flooding from water flowing into the country by the major rivers Rhine and Meuse, while a complicated system of drainage ditches, canals, and pumping stations (historically: windmills) keep the low-lying parts dry for habitation and agriculture. Water control boards are the independent local government bodies responsible for maintaining this system.

In modern times, flood disasters coupled with technological developments have led to large construction works to reduce the influence of the sea and prevent future floods. These have proved essential over the course of Dutch history, both geographically and militarily, and has greatly impacted the lives of many living in the cities affected, stimulating their economies through constant infrastructural improvement.

History

The Greek geographer Pytheas noted of the Low Countries, as he passed them on his way to Heligoland around c. 325 BCE, that "more people died in the struggle against water than in the struggle against men". Roman author Pliny, of the 1st century, wrote something similar in his Natural History:

There, twice in every twenty-four hours, the ocean's vast tide sweeps in a flood over a large stretch of land and hides Nature's everlasting controversy about whether this region belongs to the land or to the sea. There these wretched peoples occupy high ground, or manmade platforms constructed above the level of the highest tide they experience; they live in huts built on the site so chosen and are like sailors in ships when the waters cover the surrounding land, but when the tide has receded they are like shipwrecked victims. Around their huts they catch fish as they try to escape with the ebbing tide. It does not fall to their lot to keep herds and live on milk, like neighboring tribes, nor even to fight with wild animals, since all undergrowth has been pushed far back.

The flood-threatened area of the Netherlands is essentially an alluvial plain, built up from sediment left by thousands of years of flooding by rivers and the sea. About 2,000 years ago most of the Netherlands was covered by extensive peat swamps. The coast consisted of a row of coastal dunes and natural embankments which kept the swamps from draining but also from being washed away by the sea. The only areas suitable for habitation were on the higher grounds in the east and south and on the dunes and natural embankments along the coast and the rivers. In several places the sea had broken through these natural defenses and created extensive floodplains in the north. The first permanent inhabitants of this area were probably attracted by the sea-deposited clay soil which was much more fertile than the peat and sandy soil further inland. To protect themselves against floods they built their homes on artificial dwelling hills called terpen or wierden (known as Warften or Halligen in Germany). Between 500 BC and AD 700 there were probably several periods of habitation and abandonment as the sea level periodically rose and fell. The first dikes were low embankments of only a meter or so in height surrounding fields to protect the crops against occasional flooding. Around the 9th century the sea was on the advance again and many terps had to be raised to keep them safe. Many single terps had by this time grown together as villages. These were now connected by the first dikes.

After about AD 1000 the population grew, which meant there was a greater demand for arable land but also that there was a greater workforce available and dike construction was taken up more seriously. The major contributors in later dike building were the monasteries. As the largest landowners they had the organization, resources and manpower to undertake the large construction. By 1250 most dikes had been connected into a continuous sea defense.

The next step was to move the dikes ever-more seawards. Every cycle of high and low tide left a small layer of sediment. Over the years these layers had built up to such a height that they were rarely flooded. It was then considered safe to build a new dike around this area. The old dike was often kept as a secondary defense, called a sleeper dike.

Aerial photograph of a white stone tower near the shore
The Plompe toren, the only remainder of the village Koudekerke

A dike couldn't always be moved seawards. Especially in the southwest river delta it was often the case that the primary sea dike was undermined by a tidal channel. A secondary dike was then built, called an inlaagdijk. With an inland dike, when the seaward dike collapses the secondary inland dike becomes the primary. Although the redundancy provides security, the land from the first to second dike is lost; over the years the loss can become significant.

Taking land from the cycle of flooding by putting a dike around it prevents it from being raised by silt left behind after a flooding. At the same time the drained soil consolidates and peat decomposes leading to land subsidence. In this way the difference between the water level on one side and land level on the other side of the dike grew. While floods became more rare, if the dike did overflow or was breached the destruction was much larger.

The construction method of dikes has changed over the centuries. Popular in the Middle Ages were wierdijken, earth dikes with a protective layer of seaweed. An earth embankment was cut vertically on the sea-facing side. Seaweed was then stacked against this edge, held into place with poles. Compression and rotting processes resulted in a solid residue that proved very effective against wave action and they needed very little maintenance. In places where seaweed was unavailable other materials such as reeds or wicker mats were used.

Sea dike where on the sea side the water level is clearly many meters higher than the ground level on the land side
Sea dike keeping Delfzijl and surroundings dry in 1994

Another system used much and for a long time was that of a vertical screen of timbers backed by an earth bank. Technically these vertical constructions were less successful as vibration from crashing waves and washing out of the dike foundations weakened the dike.

Much damage was done to these wood constructions with the arrival of the shipworm (Teredo navalis), a bivalve thought to have been brought to the Netherlands by VOC trading ships, that ate its way through Dutch sea defenses around 1730. The change was made from wood to using stone for reinforcement. This was a great financial setback as there is no natural occurring rock in the Netherlands and it all had to be imported from abroad.

Current dikes are made with a core of sand, covered by a thick layer of clay to provide waterproofing and resistance against erosion. Dikes without a foreland have a layer of crushed rock below the waterline to slow wave action. Up to the high waterline the dike is often covered with carefully laid basalt stones or a layer of tarmac. The remainder is covered by grass and maintained by grazing sheep. Sheep keep the grass dense and compact the soil, in contrast to cattle.

Developing the peat swamps

At about the same time as the building of dikes the first swamps were made suitable for agriculture by colonists. By digging a system of parallel drainage ditches water was drained from the land to be able to grow grain. However, the peat settled much more than other soil types when drained and land subsidence resulted in developed areas becoming wet again. Cultivated lands which were at first primarily used for growing grain thus became too wet and the switch was made to dairy farming. A new area behind the existing field was then cultivated, heading deeper into the wild. This cycle repeated itself several times until the different developments met each other and no further undeveloped land was available. All land was then used for grazing cattle.

Typical Dutch scene with a series of windmills along the waters edge
The windmills of Kinderdijk, the Netherlands

Because of the continuous land subsidence it became ever more difficult to remove excess water. The mouths of streams and rivers were dammed to prevent high water levels flowing back upstream and overflowing cultivated lands. These dams had a wooden culvert equipped with a valve, allowing drainage but preventing water from flowing upstream. These dams, however, blocked shipping and the economic activity caused by the need to transship goods caused villages to grow up near the dam, some famous examples are Amsterdam (dam in the river Amstel) and Rotterdam (dam in the Rotte). Only in later centuries were locks developed to allow ships to pass.

Further drainage could only be accomplished after the development of the polder windmill in the 15th century. The wind-driven water pump has become one of the trademark tourist attractions of the Netherlands. The first drainage mills using a scoop wheel could raise water at most 1.5 m. By combining mills the pumping height could be increased. Later mills were equipped with an Archimedes' screw which could raise water much higher. The polders, now often below sea level, were kept dry with mills pumping water from the polder ditches and canals to the boezem ("bosom"), a system of canals and lakes connecting the different polders and acting as a storage basin until the water could be let out to river or sea, either by a sluice gate at low tide or using further pumps. This system is still in use today, though drainage mills have been replaced by first steam and later diesel and electric pumping stations.

Round brick building of gothic architecture with steel beams protruding from the windows
De Cruquius is one of the three pumping stations that drained the Haarlemmermeer

The growth of towns and industry in the Middle Ages resulted in an increased demand for dried peat as fuel. First all the peat down to the groundwater table was dug away. In the 16th century a method was developed to dig peat below water, using a dredging net on a long pole. Large scale peat dredging was taken up by companies, supported by investors from the cities.

These undertakings often devastated the landscape as agricultural land was dug away and the leftover ridges, used for drying the peat, collapsed under the action of waves. Small lakes were created which quickly grew in area, every increase in surface water leading to more leverage of the wind on the water to attack more land. It even led to villages being lost to the waves of human-made lakes.

The development of the polder mill gave the option of draining the lakes. In the 16th century this work was started on small, shallow lakes, continuing with ever-larger and deeper lakes, though it wasn't until in the 19th century that the most dangerous of lakes, the Haarlemmermeer near Amsterdam, was drained using steam power. Drained lakes and new polders can often be easily distinguished on topographic maps by their different regular division pattern as compared to their older surroundings. Millwright and hydraulic engineer Jan Leeghwater has become famous for his involvement in these works.

Control of river floods

Three major European rivers, the Rhine, Meuse, and Scheldt flow through the Netherlands, of which the Rhine and Meuse cross the country from east to west.

The first large construction works on the rivers were conducted by the Romans. Nero Claudius Drusus was responsible for building a dam in the Rhine to divert water from the river branches Waal to the Nederrijn and possibly for connecting the river IJssel, previously only a small stream, to the Rhine. Whether these were intended as flood control measures or just for military defense and transport purposes is unclear.

The first river dikes appeared near the river mouths in the 11th century, where incursions from the sea added to the danger from high water levels on the river. Local rulers dammed branches of rivers to prevent flooding on their lands (Graaf van Holland, c. 1160, Kromme Rijn; Floris V, 1285, Hollandse IJssel), only to cause problems to others living further upstream. Large scale deforestation upstream caused the river levels to become ever more extreme while the demand for arable land led to more land being protected by dikes, giving less space to the river stream bed and so causing even higher water levels. Local dikes to protect villages were connected to create a ban dike to contain the river at all times. These developments meant that while the regular floods for the first inhabitants of the river valleys were just a nuisance, in contrast the later incidental floods when dikes burst were much more destructive.

A river dike with a narrow road on top, high water levels on the river to the left, low lying meadows and a farm on the right
The Nederrijn in 1995

The 17th and 18th centuries were a period of many infamous river floods resulting in much loss of life. They were often caused by ice dams blocking the river. Land reclamation works, large willow plantations and building in the winter bed of the river all worsened the problem. Next to the obvious clearing of the winter bed, overflows (overlaten) were created. These were intentionally low dikes where the excess water could be diverted downstream. The land in such a diversion channel was kept clear of buildings and obstructions. As this so-called green river could therefore essentially only be used for grazing cattle it was in later centuries seen as a wasteful use of land. Most overflows have now been removed, focusing instead on stronger dikes and more control over the distribution of water across the river branches. To achieve this canals such as the Pannerdens Kanaal and Nieuwe Merwede were dug.

A committee reported in 1977 about the weakness of the river dikes, but there was too much resistance from the local population against demolishing houses and straightening and strengthening the old meandering dikes. It took the flood threats in 1993 and again in 1995, when over 200,000 people had to be evacuated and the dikes only just held, to put plans into action. Now the risk of a river flooding has been reduced from once every 100 years to once every 1,250 years. Further works in the Room for the River project are being carried out to give the rivers more space to flood and in this way reducing the flood height.

Water control boards

The first dikes and water control structures were built and maintained by those directly benefiting from them, mostly farmers. As the structures got more extensive and complex councils were formed from people with a common interest in the control of water levels on their land and so the first water boards began to emerge. These often controlled only a small area, a single polder or dike. Later they merged or an overall organization was formed when different water boards had conflicting interests. The original water boards differed much from each other in the organisation, power, and area that they managed. The differences were often regional and were dictated by differing circumstances, whether they had to defend a sea dike against a storm surge or keep the water level in a polder within bounds. In the middle of the 20th century there were about 2,700 water control boards. After many mergers there are currently 27 water boards left. Water boards hold separate elections, levy taxes, and function independently from other government bodies.

The dikes were maintained by the individuals who benefited from their existence, every farmer having been designated part of the dike to maintain, with a three-yearly viewing by the water board directors. The old rule "Whom the water hurts, he the water stops" (Wie het water deert, die het water keert) meant that those living at the dike had to pay and care for it. This led to haphazard maintenance and it is believed that many floods would not have happened or would not have been as severe if the dikes had been in better condition. Those living further inland often refused to pay or help in the upkeep of the dikes though they were just as much affected by floods, while those living at the dike itself could go bankrupt from having to repair a breached dike.

Rijkswaterstaat (Directorate General for Public Works and Water Management) was set up in 1798 under French rule to put water control in the Netherlands under a central government. Local waterboards however were too attached to their autonomy and for most of the time Rijkswaterstaat worked alongside the local waterboards. Rijkswaterstaat has been responsible for many major water control structures and was later and still is also involved in building railroads and highways.

Water boards may try new experiments like the sand engine off the coast of South Holland.

Notorious floods

Black and white drawing with collapsing buildings and people and animals in the water. A church in the distance and storm clouds in the sky
A flood at Erichem, 1809

Over the years there have been many storm surges and floods in the Netherlands. Some deserve special mention as they particularly have changed the contours of the Netherlands.

A series of devastating storm surges, more or less starting with the First All Saints' flood (Allerheiligenvloed) in 1170 washed away a large area of peat marshes, enlarging the Wadden Sea and connecting the previously existing Lake Almere in the middle of the country to the North Sea, thereby creating the Zuiderzee. It in itself would cause much trouble until the building of the Afsluitdijk in 1933.

Several storms starting in 1219 created the Dollart from the mouth of the river Ems. By 1520 the Dollart had reached its largest area. Reiderland, containing several towns and villages, was lost. Much of this land was later reclaimed.

In 1421 the St. Elizabeth's flood caused the loss of De Grote Waard in the southwest of the country. Particularly the digging of peat near the dike for salt production and neglect because of a civil war caused dikes to fail, which created the Biesbosch, now a valued nature reserve.

The more recent floodings of 1916 and 1953 gave rise to building the Afsluitdijk and Deltaworks respectively.

Flooding as military defense

The Defence Line of Amsterdam used flooding as a protective measure

The deliberate inundating of certain areas can allow a military defensive line to be created. In case of an advancing enemy army, the area was to be inundated with about 30 cm (1 ft) of water, too shallow for boats but deep enough to make advance on foot difficult by hiding underwater obstacles such as canals, ditches, and purpose-built traps. Dikes crossing the flooded area and other strategic points were to be protected by fortifications. The system proved successful on the Hollandic Water Line in rampjaar 1672 during the Third Anglo-Dutch War but was overcome in 1795 because of heavy frost. It was also used with the Stelling van Amsterdam, the Grebbe line and the IJssel Line. The advent of heavier artillery and especially airplanes have made that strategy largely obsolete.

Modern developments

Technological development in the 20th century meant that larger projects could be undertaken to further improve the safety against flooding and to reclaim large areas of land. The most important are the Zuiderzee Works and the Delta Works. By the end of the 20th century all sea inlets have been closed off from the sea by dams and barriers. Only the Westerschelde needs to remain open for shipping access to the port of Antwerp. Plans to reclaim parts of the Wadden Sea and the Markermeer were eventually called off because of the ecological and recreational values of these waters.

Zuiderzee Works

Map showing a large lake, with the dams and the polders that were built
The Zuiderzee Works turned the Zuiderzee into a fresh water lake IJsselmeer, and created 1650 km² of land.
 

The Zuiderzee Works (Zuiderzeewerken) are a system of dams, land reclamation, and water drainage works. The basis of the project was the damming off of the Zuiderzee, a large shallow inlet of the North Sea. This dam, called the Afsluitdijk, was built in 1932–33, separating the Zuiderzee from the North Sea. As result, the Zuider sea became the IJsselmeer—IJssel lake.

Following the damming, large areas of land were reclaimed in the newly freshwater lake body by means of polders. The works were performed in several steps from 1920 to 1975. Engineer Cornelis Lely played a major part in its design and as statesman in the authorization of its construction.

Delta Works

A long row of concrete towers with steel structures connecting them and a very rough sea
Oosterscheldekering at work during a storm.
 

A study done by Rijkswaterstaat in 1937 showed that the sea defenses in the southwest river delta were inadequate to withstand a major storm surge. The proposed solution was to dam all the river mouths and sea inlets thereby shortening the coast. However, because of the scale of this project and the intervention of the Second World War its construction was delayed and the first works were only completed in 1950. The North Sea flood of 1953 gave a major impulse to speed up the project. In the following years a number of dams were built to close off the estuary mouths. In 1976, under pressures from environmental groups and the fishing industry, it was decided not to close off the Oosterschelde estuary by a solid dam but instead to build the Oosterscheldekering, a storm surge barrier which is only closed during storms. It is the most well-known (and most expensive) dam of the project. A second major hurdle for the works was in the Rijnmond area. A storm surge through the Nieuwe Waterweg would threaten about 1.5 million people around Rotterdam. However, closing off this river mouth would be very detrimental for the Dutch economy, as the Port of Rotterdam—one of the biggest sea ports in the world—uses this river mouth. Eventually, the Maeslantkering was built in 1997, keeping economical factors in mind: the Maeslantkering is a set of two swinging doors that can shut off the river mouth when necessary, but which are usually open. The Maeslantkering is forecast to close about once per decade. Up until January 2012, it has closed only once, in 2007.

Current situation and future

The current sea defenses are stronger than ever, but experts warn that complacency would be a mistake. New calculation methods revealed numerous weak spots. Sea level rise could increase the mean sea level by one to two meters by the end of this century, with even more following. This, land subsidence, and increased storms make further upgrades to the flood control and water management infrastructure necessary.

The sea defenses are continuously being strengthened and raised to meet the safety norm of a flood chance of once every 10,000 years for the west, which is the economic heart and most densely populated part of the Netherlands, and once every 4,000 years for less densely populated areas. The primary flood defenses are tested against this norm every five years. In 2010 about 800 km of dikes out of a total of 3,500 km failed to meet the norm. This does not mean there is an immediate flooding risk; it is the result of the norm's becoming more strict from the results of scientific research on, for example, wave action and sea level rise.

A ship sailing just in front of the beach. From the ship a dark jet of sand and water is blown towards the coast
Sand replenishment in front of a Dutch beach

The amount of coastal erosion is compared against the so-called "reference coastline" (BasisKustLijn), the average coastline in 1990. Sand replenishment is used where beaches have retreated too far. About 12 million m3 of sand are deposited yearly on the beaches and below the waterline in front of the coast.

The Stormvloedwaarschuwingsdienst (SVSD; Storm Surge Warning Service) makes a water level forecast in case of a storm surge and warns the responsible parties in the affected coastal districts. These can then take appropriate measures depending on the expected water levels, such as evacuating areas outside the dikes, closing barriers and in extreme cases patrolling the dikes during the storm.

The Second Delta Committee, or Veerman Committee, officially Staatscommissie voor Duurzame Kustontwikkeling (State Committee for Durable Coast Development) gave its advice in 2008. It expects a sea level rise of 65 to 130 cm by the year 2100. Among its suggestions are:

  • to increase the safety norms tenfold and strengthen dikes accordingly,
  • to use sand replenishment to broaden the North Sea coast and allow it to grow naturally,
  • to use the lakes in the southwest river delta as river water retention basins,
  • to raise the water level in the IJsselmeer to provide freshwater.

These measures would cost approximately 1 billion Euro/year.

Room for the River

Global warming in the 21st century might result in a rise in sea level which could overwhelm the measures the Netherlands has taken to control floods. The Room for the River project allows for periodic flooding of indefensible lands. In such regions residents have been removed to higher ground, some of which has been raised above anticipated flood levels.

Lie point symmetry

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Lie_point_symmetry     ...