Search This Blog

Monday, November 28, 2022

Mountain

From Wikipedia, the free encyclopedia
 
Mount Everest, Earth's highest mountain

A mountain is an elevated portion of the Earth's crust, generally with steep sides that show significant exposed bedrock. Although definitions vary, a mountain may differ from a plateau in having a limited summit area, and is usually higher than a hill, typically rising at least 300 metres (1,000 feet) above the surrounding land. A few mountains are isolated summits, but most occur in mountain ranges.

Mountains are formed through tectonic forces, erosion, or volcanism, which act on time scales of up to tens of millions of years. Once mountain building ceases, mountains are slowly leveled through the action of weathering, through slumping and other forms of mass wasting, as well as through erosion by rivers and glaciers.

High elevations on mountains produce colder climates than at sea level at similar latitude. These colder climates strongly affect the ecosystems of mountains: different elevations have different plants and animals. Because of the less hospitable terrain and climate, mountains tend to be used less for agriculture and more for resource extraction, such as mining and logging, along with recreation, such as mountain climbing and skiing.

The highest mountain on Earth is Mount Everest in the Himalayas of Asia, whose summit is 8,850 m (29,035 ft) above mean sea level. The highest known mountain on any planet in the Solar System is Olympus Mons on Mars at 21,171 m (69,459 ft).

Mount Kilimanjaro in Tanzania, Africa's highest mountain

Definition

Mount Elbrus, the highest mountain in Europe
 
Puncak Jaya in Indonesia, the highest mountain in Oceania

There is no universally accepted definition of a mountain. Elevation, volume, relief, steepness, spacing and continuity have been used as criteria for defining a mountain. In the Oxford English Dictionary a mountain is defined as "a natural elevation of the earth surface rising more or less abruptly from the surrounding level and attaining an altitude which, relatively to the adjacent elevation, is impressive or notable."

Whether a landform is called a mountain may depend on local usage. Mount Scott outside Lawton, Oklahoma, US, is only 251 m (823 ft) from its base to its highest point. John Whittow's Dictionary of Physical Geography states "Some authorities regard eminences above 600 metres (1,969 ft) as mountains, those below being referred to as hills."

In the United Kingdom and the Republic of Ireland, a mountain is usually defined as any summit at least 2,000 feet (610 m) high, which accords with the official UK government's definition that a mountain, for the purposes of access, is a summit of 2,000 feet (610 m) or higher. In addition, some definitions also include a topographical prominence requirement, such as that the mountain rises 300 metres (984 ft) above the surrounding terrain. At one time the US Board on Geographic Names defined a mountain as being 1,000 feet (305 m) or taller, but has abandoned the definition since the 1970s. Any similar landform lower than this height was considered a hill. However, today, the US Geological Survey concludes that these terms do not have technical definitions in the US.

The UN Environmental Programme's definition of "mountainous environment" includes any of the following:

  • Class 1: Elevation greater than 4,500 m (14,764 ft).
  • Class 2: Elevation between 3,500 m (11,483 ft) and 4,500 m (14,764 ft).
  • Class 3: Elevation between 2,500 m (8,202 ft) and 3,500 m (11,483 ft).
  • Class 4: Elevation between 1,500 m (4,921 ft) and 2,500 m (8,202 ft), with a slope greater than 2 degrees.
  • Class 5: Elevation between 1,000 m (3,281 ft) and 1,500 m (4,921 ft), with a slope greater than 5 degrees and/or 300 m (984 ft) elevation range within 7 km (4.3 mi).
  • Class 6: Elevation between 300 m (984 ft) and 1,000 m (3,281 ft), with a 300 m (984 ft) elevation range within 7 km (4.3 mi).
  • Class 7: Isolated inner basins and plateaus less than 25 km2 (9.7 sq mi) in area that are completely surrounded by Class 1 to 6 mountains, but do not themselves meet criteria for Class 1 to 6 mountains.

Using these definitions, mountains cover 33% of Eurasia, 19% of South America, 24% of North America, and 14% of Africa. As a whole, 24% of the Earth's land mass is mountainous.

Geology

There are three main types of mountains: volcanic, fold, and block. All three types are formed from plate tectonics: when portions of the Earth's crust move, crumple, and dive. Compressional forces, isostatic uplift and intrusion of igneous matter forces surface rock upward, creating a landform higher than the surrounding features. The height of the feature makes it either a hill or, if higher and steeper, a mountain. Major mountains tend to occur in long linear arcs, indicating tectonic plate boundaries and activity.

Volcanoes

Volcanoes are formed when a plate is pushed below another plate, or at a mid-ocean ridge or hotspot. At a depth of around 100 km (60 mi), melting occurs in rock above the slab (due to the addition of water), and forms magma that reaches the surface. When the magma reaches the surface, it often builds a volcanic mountain, such as a shield volcano or a stratovolcano. Examples of volcanoes include Mount Fuji in Japan and Mount Pinatubo in the Philippines. The magma does not have to reach the surface in order to create a mountain: magma that solidifies below ground can still form dome mountains, such as Navajo Mountain in the US.

Fold mountains

Illustration of mountains that developed on a fold that has been thrust

Fold mountains occur when two plates collide: shortening occurs along thrust faults and the crust is overthickened. Since the less dense continental crust "floats" on the denser mantle rocks beneath, the weight of any crustal material forced upward to form hills, plateaus or mountains must be balanced by the buoyancy force of a much greater volume forced downward into the mantle. Thus the continental crust is normally much thicker under mountains, compared to lower lying areas. Rock can fold either symmetrically or asymmetrically. The upfolds are anticlines and the downfolds are synclines: in asymmetric folding there may also be recumbent and overturned folds. The Balkan Mountains and the Jura Mountains are examples of fold mountains.

Block mountains

the highest summit of Pirin
Pirin Mountain, Bulgaria, part of the fault-block Rila-Rhodope massif

Block mountains are caused by faults in the crust: a plane where rocks have moved past each other. When rocks on one side of a fault rise relative to the other, it can form a mountain. The uplifted blocks are block mountains or horsts. The intervening dropped blocks are termed graben: these can be small or form extensive rift valley systems. This form of landscape can be seen in East Africa, the Vosges and Rhine valley, and the Basin and Range Province of Western North America. These areas often occur when the regional stress is extensional and the crust is thinned.

Erosion

The Catskills in Upstate New York represent an eroded plateau.

During and following uplift, mountains are subjected to the agents of erosion (water, wind, ice, and gravity) which gradually wear the uplifted area down. Erosion causes the surface of mountains to be younger than the rocks that form the mountains themselves. Glacial processes produce characteristic landforms, such as pyramidal peaks, knife-edge arĂȘtes, and bowl-shaped cirques that can contain lakes. Plateau mountains, such as the Catskills, are formed from the erosion of an uplifted plateau.

Climate

The northern Urals at high latitude and elevation have an alpine climate and barren ground.

Climate in the mountains becomes colder at high elevations, due to an interaction between radiation and convection. Sunlight in the visible spectrum hits the ground and heats it. The ground then heats the air at the surface. If radiation were the only way to transfer heat from the ground to space, the greenhouse effect of gases in the atmosphere would keep the ground at roughly 333 K (60 °C; 140 °F), and the temperature would decay exponentially with height.

However, when air is hot, it tends to expand, which lowers its density. Thus, hot air tends to rise and transfer heat upward. This is the process of convection. Convection comes to equilibrium when a parcel of air at a given altitude has the same density as its surroundings. Air is a poor conductor of heat, so a parcel of air will rise and fall without exchanging heat. This is known as an adiabatic process, which has a characteristic pressure-temperature dependence. As the pressure gets lower, the temperature decreases. The rate of decrease of temperature with elevation is known as the adiabatic lapse rate, which is approximately 9.8 °C per kilometre (or 5.4 °F (3.0 °C) per 1000 feet) of altitude.

The presence of water in the atmosphere complicates the process of convection. Water vapor contains latent heat of vaporization. As air rises and cools, it eventually becomes saturated and cannot hold its quantity of water vapor. The water vapor condenses (forming clouds), and releases heat, which changes the lapse rate from the dry adiabatic lapse rate to the moist adiabatic lapse rate (5.5 °C per kilometre or 3 °F (1.7 °C) per 1000 feet) The actual lapse rate can vary by altitude and by location. Therefore, moving up 100 m (330 ft) on a mountain is roughly equivalent to moving 80 kilometres (45 miles or 0.75° of latitude) towards the nearest pole. This relationship is only approximate, however, since local factors such as proximity to oceans (such as the Arctic Ocean) can drastically modify the climate. As the altitude increases, the main form of precipitation becomes snow and the winds increase.

The effect of the climate on the ecology at an elevation can be largely captured through a combination of amount of precipitation, and the biotemperature, as described by Leslie Holdridge in 1947. Biotemperature is the mean temperature; all temperatures below 0 °C (32 °F) are considered to be 0 °C. When the temperature is below 0 °C, plants are dormant, so the exact temperature is unimportant. The peaks of mountains with permanent snow can have a biotemperature below 1.5 °C (34.7 °F).

Climate change

Mountain environments are particularly sensitive to anthropogenic climate change and are currently undergoing alterations unprecedented in last 10,000 years. In recent decades mountain ice caps and glaciers have experienced accelerating ice loss. The melting of the glaciers, permafrost and snow has caused underlying surfaces to become increasingly unstable. Landslip hazards have increased in both number and magnitude due to climate change.

Alpine ecosystems can also thus be particularly climatically sensitive. Many mid-latitude mountains act as cold climate refugia, with the ecosystems occupying small environmental niches. As well as the direct influence that the change in climate can have on an ecosystem, there is also the indirect one on the soils from changes in stability and soil development.

Patterns of river discharge are also significantly affected by climate change, which in turn has significant impacts on communities that rely on water fed from alpine sources. Nearly half of mountain areas provide essential or supportive water resources for mainly urban populations, in particular during the dry season and in semiarid areas such as in central Asia.

Ecology

An alpine mire in the Swiss Alps

The colder climate on mountains affects the plants and animals residing on mountains. A particular set of plants and animals tend to be adapted to a relatively narrow range of climate. Thus, ecosystems tend to lie along elevation bands of roughly constant climate. This is called altitudinal zonation. In regions with dry climates, the tendency of mountains to have higher precipitation as well as lower temperatures also provides for varying conditions, which enhances zonation.

Some plants and animals found in altitudinal zones tend to become isolated since the conditions above and below a particular zone will be inhospitable and thus constrain their movements or dispersal. These isolated ecological systems are known as sky islands.

Altitudinal zones tend to follow a typical pattern. At the highest elevations, trees cannot grow, and whatever life may be present will be of the alpine type, resembling tundra. Just below the tree line, one may find subalpine forests of needleleaf trees, which can withstand cold, dry conditions. Below that, montane forests grow. In the temperate portions of the earth, those forests tend to be needleleaf trees, while in the tropics, they can be broadleaf trees growing in a rain forest.

Mountains and humans

The highest known permanently tolerable altitude is at 5,950 metres (19,520 ft). At very high altitudes, the decreasing atmospheric pressure means that less oxygen is available for breathing, and there is less protection against solar radiation (UV). Above 8,000 metres (26,000 ft) elevation, there is not enough oxygen to support human life. This is sometimes referred to as the "death zone". The summits of Mount Everest and K2 are in the death zone.

Mountain societies and economies

Mountains are generally less preferable for human habitation than lowlands, because of harsh weather and little level ground suitable for agriculture. While 7% of the land area of Earth is above 2,500 metres (8,200 ft), only 140 million people live above that altitude and only 20-30 million people above 3,000 metres (9,800 ft) elevation. About half of mountain dwellers live in the Andes, Central Asia, and Africa.

The city of La Paz reaches up to 4,000 metres (13,000 ft) in elevation.

With limited access to infrastructure, only a handful of human communities exist above 4,000 metres (13,000 ft) of elevation. Many are small and have heavily specialized economies, often relying on industries such as agriculture, mining, and tourism. An example of such a specialized town is La Rinconada, Peru, a gold-mining town and the highest elevation human habitation at 5,100 metres (16,700 ft). A counterexample is El Alto, Bolivia, at 4,150 metres (13,620 ft), which has a highly diverse service and manufacturing economy and a population of nearly 1 million.

Traditional mountain societies rely on agriculture, with higher risk of crop failure than at lower elevations. Minerals often occur in mountains, with mining being an important component of the economics of some montane societies. More recently, tourism supports mountain communities, with some intensive development around attractions such as national parks or ski resorts. About 80% of mountain people live below the poverty line.

Most of the world's rivers are fed from mountain sources, with snow acting as a storage mechanism for downstream users. More than half of humanity depends on mountains for water.

In geopolitics mountains are often seen as preferable "natural boundaries" between polities.

Mountaineering

Mountaineers climbing in South Tyrol

Mountain climbing, or alpinism is the sport, hobby or profession of hiking, skiing, and climbing mountains. While mountaineering began as attempts to reach the highest point of unclimbed big mountains it has branched into specializations that address different aspects of the mountain and consists of three areas: rock-craft, snow-craft and skiing, depending on whether the route chosen is over rock, snow or ice. All require experience, athletic ability, and technical knowledge of the terrain to maintain safety.

Mountains as sacred places

Mountains often play a significant role in religion. There are for example a number of sacred mountains within Greece such as Mount Olympus which was held to be the home of the gods. In Japanese culture, the 3,776.24 m (12,389 ft) volcano of Mount Fuji is also held to be sacred with tens of thousands of Japanese ascending it each year. Mount Kailash, in the Tibet Autonomous Region of China, is considered to be sacred in four religions: Hinduism, Bon, Buddhism, and Jainism. In Ireland, pilgrimages are made up the 952 metres (3,123 ft) Mount Brandon by Irish Catholics. The Himalayan peak of Nanda Devi is associated with the Hindu goddesses Nanda and Sunanda; it has been off-limits to climbers since 1983. Mount Ararat is a sacred mountain, as it is believed to be the landing place of Noah's Ark. In Europe and especially in the Alps, summit crosses are often erected on the tops of prominent mountains.

Superlatives

Chimborazo, Ecuador. The point on Earth's surface farthest from its centre.

Heights of mountains are typically measured above sea level. Using this metric, Mount Everest is the highest mountain on Earth, at 8,848 metres (29,029 ft). There are at least 100 mountains with heights of over 7,200 metres (23,622 ft) above sea level, all of which are located in central and southern Asia. The highest mountains above sea level are generally not the highest above the surrounding terrain. There is no precise definition of surrounding base, but Denali, Mount Kilimanjaro and Nanga Parbat are possible candidates for the tallest mountain on land by this measure. The bases of mountain islands are below sea level, and given this consideration Mauna Kea (4,207 m (13,802 ft) above sea level) is the world's tallest mountain and volcano, rising about 10,203 m (33,474 ft) from the Pacific Ocean floor.

The highest mountains are not generally the most voluminous. Mauna Loa (4,169 m or 13,678 ft) is the largest mountain on Earth in terms of base area (about 2,000 sq mi or 5,200 km2) and volume (about 18,000 cu mi or 75,000 km3). Mount Kilimanjaro is the largest non-shield volcano in terms of both base area (245 sq mi or 635 km2) and volume (1,150 cu mi or 4,793 km3). Mount Logan is the largest non-volcanic mountain in base area (120 sq mi or 311 km2).

The highest mountains above sea level are also not those with peaks farthest from the centre of the Earth, because the figure of the Earth is not spherical. Sea level closer to the equator is several miles farther from the centre of the Earth. The summit of Chimborazo, Ecuador's tallest mountain, is usually considered to be the farthest point from the Earth's centre, although the southern summit of Peru's tallest mountain, HuascarĂĄn, is another contender. Both have elevations above sea level more than 2 kilometres (6,600 ft) less than that of Everest.

Rock climbing

From Wikipedia, the free encyclopedia
 
A rock climber ascending a rope
 
A rock climber approaches a roof while leading a multi-pitch, traditional route in Custer State Park, United States.

Rock climbing is a sport in which participants climb up, across, or down natural rock formations or artificial rock walls. The goal is to reach the summit of a formation or the endpoint of a usually pre-defined route without falling. Rock climbing is a physically and mentally demanding sport, one that often tests a climber's strength, endurance, agility and balance along with mental control. Knowledge of proper climbing techniques and the use of specialized climbing equipment is crucial for the safe completion of routes.

Because of the wide range and variety of rock formations around the world, rock climbing has been separated into several different styles and sub-disciplines, such as scrambling, bouldering, sport climbing, and trad (traditional) climbing another activity involving the scaling of hills and similar formations, differentiated by the rock climber's sustained use of hands to support their body weight as well as to provide balance.

Rock climbing competitions have the objectives of either completing the route in the least amount of attempts or attaining the farthest point on an increasingly difficult route. Indoor rock climbing is typically split into three disciplines: bouldering, lead climbing, and top roping.

History

Climbing in Germany, circa 1965.

Paintings dating from 200 BC show Chinese men rock climbing. In early America, the cliff-dwelling Anasazi in the 12th century are thought to have been excellent climbers. Early European climbers used rock climbing techniques as a skill required to reach the summit in their mountaineering exploits. In the 1880s, European rock climbing became an independent pursuit outside of mountain climbing.

Although rock climbing was an important component of Victorian mountaineering in the Alps, it is generally thought that the sport of rock climbing began in the last quarter of the nineteenth century in various parts of Europe. Rock climbing evolved gradually from an alpine necessity to a distinct athletic activity. From the middle of the 19th century, the founder of the Alpine Club, John Ball, researched and made known the Dolomites. He was followed there by many other climbers such as Paul Grohmann, Edward R. Whitwell, Michael Innerkofler, Angelo Dibona and Tita Piaz with many first ascents.

Just before the First World War, there was a so-called "Mauerhakenstreit" (German: the Great Piton Debate of 1911) in Central Europe regarding the use of aids in climbing and mountaineering. Paul Preuss and Hans DĂŒlfer were the main actors in these discussions, which have essentially continued to this day. Preuss propagated a pure climbing style. Angelo Dibona, on the other hand, was an advocate of security and was not fundamentally averse to pitons. When Luis Trenker asked how many pitons he had hit in total in life, Dibona replied: "Fifteen, six of them on the Laliderer north face, three on the Ödstein, two on the Croz dell 'Altissimo, one on the Einser and the rest on other difficult climbs."

Aid climbing, climbing using equipment that acts as artificial handhold or footholds, became popular during the period 1920–1960, leading to ascents in the Alps and in Yosemite Valley that were considered impossible without such means. However, climbing techniques, equipment and ethical considerations have evolved steadily. Today, free climbing, climbing using holds made entirely of natural rock while using gear solely for protection and not for upward movement, is the most popular form of the sport. Free climbing has since been divided into several sub-styles of climbing dependent on belay configuration.

Over time, grading systems have also been created in order to compare more accurately the relative difficulties of the rock climbs.

On August 3, 2016, the International Olympic Committee (IOC) formally announced that sport climbing would be a medal sport in the 2020 Summer Olympics. The event debut was postponed to 2021, due to COVID-19.

Style

In How to Rock Climb, John Long writes that for moderately skilled climbers simply getting to the top of a route is not enough- how one gets to the top matters. Within free climbing, there are several distinctions given to ascents:

  • On-sighting a route requires that the climber ascend cleanly (without any falls or rest with the assistance of artificial equipment) on their first attempt without any foreknowledge.
  • Flashing also requires a clean ascent on the first try, though the climber has previous information about the route (often called beta). This may include talking about the with other climbers about the route or observing others climb the route.
  • Redpointing means to make a successful free ascent of the route after having previously tried it. This may include multiple days or even years of "working" the route to learn the specific sequence required.
  • Pinkpointing means to make a successful free ascent of the route after having previously tried it, with protection (or "pro") such as quickdraws or trad equipment pre-placed on the route.

Style is mostly up to each individual climber and even among climbers the verbiage and definitions can differ. Climbers can be more dynamic (using greater force) or static (controlled movements) in their climbing style.

Style is the "weighted" method of how the activity is performed; left is 'better':

how the route from A to B was established:

  • from below / from above
  • alone / team
  • continuous / besieged
  • naturally protected / mix / bolted

how did I climb the route from A to B:

  • free / on aid
  • alone / team
  • on sight / without fall / with fall / with rest
  • protected on lead / preprotected

It is the style that describes your premise for your climbing. When you recognize a style, performance can be judged in relation to it. Since style is "weighted" in the range from "good" to "bad" (from left to right in the list), one can compare ascents of the same route. Good style is to keep the number of input factors (trials, time, equipment) low to leave the result uncertain, and the degree of adventure high. Since style is not the climb itself, you can climb the same route and improve your style over time. Tommy Caldwell and Kevin JĂžrgensen created their own style before starting the final push up Dawn Wall; they called it "Team Free", and were their yardstick for success.

Ethics

Ethics are values of a more general nature that are linked to the activity 

  • acting in accord with "sportsmanship"
  • acting in accord with nature preservation, sustainable, and LNT practices
  • acting in accord with local culture and history

In sportsmanship, being a "good sport" is the highest honor; be honest, show respect for the opponent and the challenge - and not least take both success and adversity with dignified calm. Go for the ball and not the man.

Ethics to consider when establishing new routes is locally rooted. In Elbsandstein, bolts are OK if placed from below, by hand, not by cracks and not too close. At Gritstone, only natural protection applies. On granite in California, bolts are OK to link cracks together, but only placed from below. In the Alps, several styles live in parallel: long and beautiful routes with a style like in California (M Piola and the Remy brothers), but also new routes with bolts close to cracks and old routes being retrobolted. The number of bolted routes has become so large that the UIAA is worried that the opportunity for naturally protected climbing will diminish. The UIAA uses both style and ethics in its argument, but the goal is to protect some areas that may be the arena for what they call "adventure climbing".

Types of climbing

Most of the climbing done in modern times is considered free climbing—climbing using one's own physical strength, with equipment used solely as protection and not as support—as opposed to aid climbing, the gear-dependent form of climbing that was dominant in the sport's earlier days. Free climbing is typically divided into several styles that differ from one another depending on the choice of equipment used and the configurations of their belay, rope and anchor systems.

As routes get higher off the ground, the increased risk of life-threatening injuries necessitates additional safety measures. A variety of specialized climbing techniques and climbing equipment exists to provide that safety. Climbers will usually work in pairs and utilize a system of ropes and anchors designed to catch falls. Ropes and anchors can be configured in different ways to suit many styles of climbing, and roped climbing are thus divided into further sub-types that vary based on how their belay systems are set up. Generally speaking, beginners will start with top roping and/or easy bouldering and work their way up to lead climbing and beyond.

Due to the length of time and extended endurance required, and because accidents are most likely to happen on the descent, rock climbers do not usually climb back down the route, or "downclimb," especially on the larger multiple pitch class III–IV, or multi-day grade IV–VI climbs.

Aid

Still the most popular method of climbing big walls, aid climbers make progress up a wall by repeatedly placing and weighting gear that is used directly to aid ascent and enhance safety. This form of climbing is typically used when ascent is too technically difficult or impossible for free climbing.

Man sport climbing under overhang

Free

The most commonly used method to ascend climbs refers to climbs where the climber's own physical strength and skill are relied upon to accomplish the climb. Free climbing may rely on top rope belay systems, or on lead climbing to establish protection and the belay stations. Anchors, ropes and protection are used to back up the climber and are passive as opposed to active ascending aids. Sub-types of free climbing are trad climbing and sport climbing. Free climbing is generally done as "clean lead" meaning no pitons or pins are used as protection.

Bouldering

Climbing on short, low routes without the use of the safety rope that is typical of most other styles. Protection, if used at all, typically consists of a cushioned bouldering pad below the route and a spotter, a person who watches from below and directs the fall of the climber away from hazardous areas. Bouldering may be an arena for intense and relatively safe competition, resulting in exceptionally high difficulty standards.

Solo

Solo climbing, or soloing, is a style of climbing in which the climber climbs alone, without the assistance of a belay.

Deep-water solo (DWS)

Deep-water soloing (or psicobloc) is similar to free soloing in that the climber is unprotected and without a rope, but should the climber fall, it is into deep water instead of onto the ground.

Free solo

Free soloing, referred to as "soloing" in the UK, is single-person climbing without the use of any rope or protection system. If a fall occurs and the climber is not over water (as in the case of deep water soloing), the climber is likely to be killed or seriously injured. Though technically similar to bouldering, free solo climbing typically refers to routes that are far taller and/or far more lethal than bouldering. The term "highball" is used to refer to climbing on the boundary between free soloing and bouldering, where what is usually climbed as a boulder problem may be high enough for a fall to cause serious injury (20 ft. and higher) and hence could also be considered to be a free solo.

Roped solo

Solo climbing with a rope secured at the beginning of the climb allowing a climber to self-belay as they advance. Once the pitch is completed the soloist must descend the rope to retrieve their gear, and then reclimb the pitch. This form of climbing can be conducted free or as a form of aid climbing.

Lead

Leader belays the second on Illusion Dweller in Joshua Tree National Park, United States.

Lead climbing is a climbing technique where the lead climber ascends with the rope passing through intermittent anchors that are below them, rather than through a top anchor, as in top-rope climb. A partner belays from below the lead climber, by feeding out enough rope to allow upward progression without undue slack. As the leader progresses they use a runner and carabiners to clip the rope into intermediate points of protection such as active cams, or passive protection such as nuts; this limits the length of a potential fall. The leader also may clip into pre-placed bolts. Indoor gyms might have short runners pre-attached to fixed anchor points in the wall.

Unlike top-rope climbing, where the climber is always supported by an anchor located above the climber, lead climbing often involves scenarios where the climber will be attached to a point under him or her. In these cases, if the climber were to fall, the distance fallen would be much greater than that of top-rope and this is one of the main reasons lead climbing can be dangerous. The fall factor is the ratio of the height a climber falls and the length of rope available to absorb the fall. The higher the fall factor, the more force placed on the climber as the ropes decelerate them. The maximum fall factor is 2. It is often advised that climbers who are interested in lead climbing should learn from experienced climbers and participate in training sessions before lead climbing on their own.

Multi-pitch

The climbing rope is of a fixed length; the climber can only climb the length of the rope. Routes longer than the rope length are broken up into several segments called pitches; this is known as multi-pitch climbing. At the top of a pitch, the first climber to ascend (also known as the leader), sets up an anchor and then belays the second climber (also known as the follower) up to the anchor; as the second climber follows the route taken by the leader, the second climber removes ("cleans") the carabiners and anchors placed along the way in order to use them again on the next pitch. While "cleaning" the route, the follower attaches the carabiners and anchors to his or her harness belt loops. Once both climbers are at the top anchor, the leader begins climbing the next pitch, and so on, until the top of the route is reached.

In either case, upon completion of a route, climbers can walk back down if an alternate descent path exists, or rappel (abseil) down with the rope.

Sport

The act of climbing single- or multi-pitch routes, protected by permanently-fixed bolts and anchors drilled into the rock, using a rope and the aid of a belayer. Unlike traditional rock climbing, sport climbing involves the use of protection (bolts) placed with power drills or on rappel or permanent anchors which are attached to the rock walls. This is separate from bolted trad climbing.

Traditional

Traditional or trad climbing involves rock climbing routes in which protection against falls is placed by the climber while ascending. In the unusual event bolts are used, these are placed on lead (usually with a manual drill). More commonly removable gear called cams, hexes, and nuts are placed in constrictions or cracks in the rock to protect against falls (in place of bolts) but not to aid the ascent directly. Due to the difficulty of placing bolts on lead, bolts tend to be placed farther apart than on many sport climbs. Once bolted on lead, if repeat ascensions can repeat the route using only the previously placed bolts for protection, the route would then be considered a sport climb, and repeat ascents would be considered to be done in the sport climbing rather than trad climbing style. Routes which are protected by a mixture of preplaced bolts and traditional climbing protection (cams/nuts/hexes) are commonly referred to as "mixed" routes, as in a mix of trad and sport climbing. Historically, pitons (a kind of deformable nail) were placed in constrictions in the rock instead of hexes, nuts and cams. These are difficult to remove and often destructive, resulting in a number of unremovable "fixed" pitons on many older traditionally protected routes. These are frequently used in a similar fashion to bolts, although they are not as trustworthy and by convention are not considered when evaluating if a route is a trad climb, sport climb or mixed climb the way bolts might be.

Top rope

Top roping Balthazar (12), in the Morialta Conservation Park near Adelaide, South Australia. Top roping is the most accessible style of climbing for beginners.

Commonly known as top roping, top rope climbing is climbing in which a climber is belayed from the ground or the base of the route. A belay system resembling a pulley in which an anchor has been created at the top of a climb, through which the rope runs through from the belayer on the ground, to the climber on the ground (position before starting the climb). The rope is "taken-in," to clear up the slack as the climber moves upwards, so in the event of a fall, the climber falls the shortest distance possible. The length of a fall is normally no more than a meter, but can vary depending on the length of the route (the longer the rope, the more stretch the rope will undergo when weighted) and the weight of the climber compared to that of the belayer, among other things.

Top Roping

Belaying a climber from the top of a route, bringing them up to walk off or continue on to next pitch. A similarly safe system of climbing a route as top-roping, except the belayer has set the anchors at the top of the climb (normally after leading a route, in which case the climber is "seconding") to belay the climber either indirectly (belayer is part of the system and can be vulnerable when exposed to unexpected directions of pull and loading of the rope) or directly (belayer is not part of the system and belaying is done directly from the anchors using either an Italian / Munter Hitch or adapted use of a belay device), up the route from the top. If bolts have been clipped or traditional gear placements have been made, it is the job of the climber to collect and clean the route.

Via ferrata

A method of fairly easily ascending a route, heavily dependent on permanent protection rather than using natural rock features to proceed.

Climber with climbing gear attached at his harness

Techniques

Different types of rock require different techniques to successfully climb.

Crack

In crack climbing, the climber ascends a rock crack using specific techniques such as jamming, stemming, and laying back. Cracks can vary in size from smaller than the width of a finger to larger than human body size. Climbers may protect their hands from sharp-edged rock with tape.

Face

Face climbing is a type of climbing where climbers use features and irregularities in the rock such as finger pockets and edges to ascend a vertical rock face.

Slab

Slab climbing, also known as friction climbing, is classified by the slope of the rock. A slope for slab climbing is less than ninety degrees, and prioritizes footwork. It is also known as friction climbing, and although this might sound easy, slab is considered one of the more challenging types of climbing. Popular techniques for slab are smearing, maintaining a center of gravity, and high steps. Two of the most renowned locations for slab climbing are Joshua Tree and Yosemite, but the Looking Glass mountain and Moab are also great options. The hardest slab route ever climbed is Cryptography located in Saint Loup, Switzerland, and ascended by Alessandro Zeni.

Simul

Short for "simultaneous", simul climbing is when two climbers move at the same time. The pseudo-lead climber places gear that the pseudo-follower collects. When the leader runs low on gear they construct a belay station where the follower can join them to exchange gear. The stronger climber is often the pseudo-follower since a fall by the follower would pull the leader from below towards the last piece of gear—a potentially devastating fall for the leader. In contrast, a fall from the leader would pull the follower from above, resulting in a less serious fall. Most speed ascents involve some form of simul climbing but may also include sections of standard free climbing and the use of placed gear for advancement (i.e. partial aid or pulling on gear).

Grading systems

Climbing communities in many countries and regions have developed their own rating systems for routes. Ratings, or grades, record and communicate consensus appraisals of difficulty. Systems of ratings are inherently subjective in nature, and variation of difficulty can be seen between two climbs of the same grade. Hence, there may be occasional disagreements arising from physiological or stylistic differences among climbers. The practice of rating a climb below its actual difficulty is known as sandbagging.

The most commonly used rating systems in the United States are the Yosemite Decimal System and the Hueco V-scale bouldering grade. The current ranges for climbing routes are 5.0 for easy beginner routes to 5.15 being world class and V0–V16, respectively. As the limit of human climbing ability has not yet been reached, neither grading system has a definite endpoint and they are thus subject to revision.

Climbing grades simplified. There are many other grades but these are the most used.

The ratings take into account multiple factors affecting a route, such as the slope of the ascent, the quantity and quality of available handholds, the distance between holds, ease of placing protection and whether advanced technical maneuvers are required. Typically the rating for the hardest move on the wall will be the rating for the whole climb. While the height of a route is generally not considered a factor, a long series of sustained hard moves will often merit a higher grade than a single move of the same technical difficulty. For example, a climb with multiple 5.11 moves with no rests may thus be rated a 5.12.

Terminology

As climbing routes or problems increase in difficulty, climbers learn to develop skills that help them complete the climbs clean. There are several techniques for hands and feet as well as terms for motions that combine the two. For indoor gyms, route setters visualize and create routes for climbers, placing different kinds of holds in specific parts of the wall at particular angles because they intend climbers to use certain techniques.

Types of holds

Jug: A large open hold. Typically in the shape of a V.

Sloper: A negative smooth hold, typically in the shape of a ball or half moon.

Pockets: A hold that has a hole in it with just enough room for one or two fingers to fit inside of it.

Woman using a negative sloper as main hold

Horn: A protruding hold that is typically smooth like a sloper. These are held by wrapping your arm, or entire palm around the hold. The more surface area you have on this hold the better.

Pinch: A pinch can either be used vertically or horizontally. With a pinch hold, the muscles between the index finger and thumb are used.

Crimp/Crimper: A crimp hold allows climbers to use their fingertips to grab edges; the fingers arch.

ArĂȘte: A sharp corner or vertical edge

Volume: Volumes are wood or fiberglass structures that are supported by the climbing wall. They are generally giant, prism-like features that are introduced to change the dynamics of the wall. In Europe large climbing holds can be considered volumes, while in the US, the actual surface volume of the wall is changed by a volume.

Climber using an edge to pull herself up

Environments

An indoor climbing wall

Indoor

Indoor climbing occurs in buildings on artificial rock structures. This permits for climbing in all types of weather and at all times of the day. Climbers climb indoors to improve their skills and techniques, as well as for general exercise or fun. Indoor climbing gyms typically provide rope setups and ensure that new climbers know safe techniques.

While indoor climbing is meant to be graded the same as outdoor climbing, it can sometimes be inaccurate. For example, a small gym might rate a route as a 5.10d, whereas a larger gym might have chosen to grade the route a 5.10a. Nonetheless, indoor gyms are a convenient and climate-controlled space to train for the outdoor world.

Outdoor

Outdoors, climbs usually take place on sunny days when the holds are dry and provide the best grip, but climbers can also attempt to climb at night or in adverse weather conditions if they have the proper training and equipment. However, night climbing or climbing in adverse weather conditions will increase the difficulty and danger on any climbing route.

Equipment

Most climbers choose to wear specialized rubber climbing shoes which are often of a smaller size than their normal street shoes in order to improve sensitivity towards foot placements and use the tightness to their advantage. Climbing chalk (MgCO3) is commonly used as a drying agent to minimize sweating of the hands. Most other equipment is of a protective nature. Rock climbing is inherently dangerous, so to minimize the potential consequences resulting from a fall, climbers use protection. The most basic protective equipment is a climbing rope. Climbing pioneers would attach the rope to themselves; in the event of a fall, the rope would usually cause injury to the climber in the hope that it prevented death. With advances in technology came the development of specialized harnesses, carabiners which are used for clipping into belay and rappel anchors and connecting gear, and belay devices which are used to catch a falling climber, hold or lower a climber and for rappelling. Eventually, the placement of bolts with the use of quickdraws led to the rise of sport climbing. Traditional climbers developed the spring-loaded camming device, which allowed a wider variety of climbing styles to be adequately protected compared to chocks and hexes. Traditionally pitons were used however in most areas protection which damages the rock is discouraged. Most climbers choose to wear a specialized climbing helmet to protect them from falling rocks or equipment or head injuries from crashing into rocks.

Injuries

Injuries in rock climbing are mainly sports injuries that occur due to falls or overuse. Injuries due to falls are relatively uncommon; the vast majority of injuries result from overuse, most often occurring in the fingers, elbows, and shoulders. Such injuries are often no worse than torn calluses, cuts, burns and bruises. There are a number of skincare products specifically for climbers available in the market. However, overuse symptoms, if ignored, may lead to permanent damage especially to tendons, tendon sheaths, ligaments, and capsules. Taping of fingers and elbows to prevent injuries is common practice and there are various techniques for taping.

Photo topos

Topo image of cliff Toix Est in the Costa Blanca region of Spain, by climber Chris Craggs from a Rockfax guidebook

Illustrated photo-topos are widely used in rock climbing. Many of them are found in climbing and mountaineering guidebooks such as those published by Rockfax, or the British Mountaineering Council. Full-colour photo-topo diagrams have replaced the previous generation of text based guidebooks, which were illustrated with hand-drawn diagrams. The use of drones has helped improve the quality of images of many of the cliffs.

Site access

Cultural considerations

Some areas that are popular for climbing, for example in the United States and Australia, are also sacred places for indigenous peoples. Many such indigenous people would prefer that climbers not climb these sacred places and have made this information well known to climbers. A well-known example is the rock formation that Americans have named Devils Tower National Monument. Native American cultural concerns also led to complete climbing closures at Cave Rock at Lake Tahoe, Monument Valley, Shiprock and Canyon de Chelly.

Climbing activities can sometimes encroach on rock art sites created by various Native American cultures and early European explorers and settlers. The potential threat to these resources has led to climbing restrictions and closures in places like Hueco Tanks, Texas, and portions of City of Rocks National Reserve, Idaho.

In Australia, the monolith Uluru (Ayers Rock) is sacred to local indigenous communities and climbing is banned on anything but the established ascent route (and even then climbing is discouraged, and soon to be discontinued). Elsewhere in Australia, many formerly popular climbing routes in areas such as the Grampians and Arapiles have been closed due to indigenous cultural concerns.

Indigenous peoples are not the only cultures that object to climbing on certain rock formations. Professional climber Dean Potter kicked off a major controversy when he ignored long-accepted convention to scale Delicate Arch in 2006, resulting in strict new climbing regulation in Arches National Park.

Private property

Many significant rock outcrops exist on private land. Some people within the rock climbing community have been guilty of trespassing in many cases, often after land ownership transfers and previous access permission is withdrawn. In the U.S. the climbing community responded to access closures by forming the Access Fund. This is an "advocacy organization that keeps U.S. climbing areas open and conserves the climbing environment. Five core programs support the mission on national and local levels: public policy, stewardship and conservation (including grants), grassroots activism, climber education and land acquisition." In the U.K. the British Mountaineering Council represents climbers and their interest of public access to crags, cliffs and boulders. In Europe there are different rules in different countries regarding the rights of landowners and climbers.

Environmental impact

Although many climbers adhere to "minimal impact" and "leave no trace" practices, rock climbing is sometimes damaging to the environment. Common environmental damages include: soil erosion, breaking rock features, chalk accumulation, litter, abandoned bolts and ropes, human excrement, introduction of foreign plants through seeds on shoes and clothing, as well as damage to native plant species (especially those growing in cracks and on ledges as these are often intentionally removed during new route development through a process commonly referred to as cleaning).

Clean climbing is a style of rock climbing which seeks to minimize some of the aesthetically damaging side effects of some techniques used in trad climbing and more often, aid climbing by avoiding using equipment such as pitons, which damage rock.

Climbing can also interfere with raptor nesting since the two activities often take place on the same precipitous cliffs. Many climbing area land managers institute nesting season closures of cliffs known to be used by protected birds of prey like eagles, falcons and osprey.

Many non-climbers also object to the appearance of climbing chalk marks, anchors, bolts and slings on visible cliffs. Since these features are small, visual impacts can be mitigated through the selection of neutral, rock-matching colors for bolt hangers, webbing and chalk. The use of certain types of climbing gear is banned altogether at some crags due to the risk of damage to the rock face. In such cases, climbers use knotted slings and ropes for climbing protection.

Blowtorching is another climbing-induced impact that affects the rocks themselves. Blowtorching is when a climber uses a blowtorch to dry holds on a wet route. This mainly happens in areas that tend to have wet climbing conditions. Blowtorching is not only detrimental to the rock itself and can have permanent damage but it also leaves a very large burn mark that most non-climbers would object to the appearance of.

Vandalism

The most significant form of vandalism directly attributable to rock climbers is the alteration of the climbing surface to render it more climber-friendly.

With the advent of hard, bolted sport climbing in the 1980s, many routes were "chipped" and "glued" to provide additional features, allowing them to be climbed at the standard of the day. This attitude quickly changed as the safer sport climbing technique allowed climbers to push hard without much risk, causing the formerly more-or-less fixed grades to steadily rise. Altering routes began to be seen as limiting and pointless.

Unlike traditional climbing which generally uses protection only as a backup in case of falls, some forms of climbing—like sport climbing, canyoneering or, especially, aid climbing—rely heavily on artificial protection to advance, either by frequent falls or by directly pulling on the gear. Often these types of climbing involve multiple drilled holes in which to place temporary bolts and rivets, but in recent years an emphasis on clean techniques has grown.

Today, the charge of vandalism in climbing is more often a disagreement about the appropriateness of drilling and placing permanent bolts and other anchors. Although new fixed anchors are rarely placed by climbers, their dependency on the existing fixed anchors results in the difference between life and death. But the existing anchors remain on the climbing structure for long periods of time, changing the dynamic of the structure itself. Due to the permanent impact of the fixed anchors in wilderness areas, it was prohibited by the Wilderness Act. However, in 1990, there was a movement by the Forest Service and the Task Group to change the regulations such that fixed anchors would be allowed but still regulated in wilderness areas. These improvements led to protection for both the climbers and the Wilderness Act. Typically in the USA, the first ascensionists decide where to place protection on a new route and later climbers are supposed to live with these choices. This can cause friction and retro-bolting when the route is perceived to be dangerous to climbers who actually lead at the grade of the climb, since the first ascensionists often lead at a higher grade and therefore do not require as much protection. Failing to properly design a new route at its grade is considered arrogant and very poor form. Even in strongholds of rock-climbing tradition like Yosemite National Park, many routes are being gradually upgraded to safer standards of protection.

Marriage in Islam

From Wikipedia, the free encyclopedia ...