From Wikipedia, the free encyclopedia
 
Spontaneous emission is the process in which a 
quantum mechanical system (such as an 
atom, 
molecule or 
subatomic particle) transitions from an 
excited energy state to a lower energy state (e.g., its 
ground state) and emits a 
quantum in the form of a 
photon.
 Spontaneous emission is ultimately responsible for most of the light we
 see all around us; it is so ubiquitous that there are many names given 
to what is essentially the same process. If atoms (or molecules) are 
excited by some means other than heating, the spontaneous emission is 
called 
luminescence.
 For example, fireflies are luminescent. And there are different forms 
of luminescence depending on how excited atoms are produced (
electroluminescence, 
chemiluminescence etc.). If the excitation is affected by the absorption of radiation the spontaneous emission is called 
fluorescence.
 Sometimes molecules have a metastable level and continue to fluoresce 
long after the exciting radiation is turned off; this is called 
phosphorescence. Figurines that glow in the dark are phosphorescent. 
Lasers start via spontaneous emission, then during continuous operation work by 
stimulated emission.
Spontaneous emission cannot be explained by 
classical electromagnetic theory
 and is fundamentally a quantum process. The first person to derive the 
rate of spontaneous emission accurately from first principles was 
Dirac in his quantum theory of radiation,
[1] the precursor to the theory which he later coined 
quantum electrodynamics.
[2] Contemporary physicists, when asked to give a physical explanation for spontaneous emission, generally invoke the 
zero-point energy of the electromagnetic field.
[3][4] In 1963 the 
Jaynes-Cummings model[5] was developed describing the system of a 
two-level atom
 interacting with a quantized field mode (i.e. the vacuum) within an 
optical cavity. It gave the nonintuitive prediction that the rate of 
spontaneous emission could be controlled depending on the boundary 
conditions of the surrounding vacuum field. These experiments gave rise 
to 
cavity quantum electrodynamics (CQED), the study of effects of mirrors and cavities on radiative corrections.
 
Introduction
If a light source ('the atom') is in an excited state with energy 

, it may spontaneously decay to a lower lying level (e.g., the ground state) with energy 

, releasing the difference in energy between the two states as a photon. The photon will have 
angular frequency 
 and an 
energy 
:
 
where 

 is the 
reduced Planck constant. Note: 

, where 

 is the 
Planck constant and 

 is the linear 
frequency. The 
phase of the photon in spontaneous emission is random as is the direction in which the photon propagates. This is not true for 
stimulated emission. An energy level diagram illustrating the process of spontaneous emission is shown below:

If the number of light sources in the excited state at time 

 is given by 

, the rate at which 

 decays is:
 
where 

 is the rate of spontaneous emission. In the rate-equation 

 is a proportionality constant for this particular transition in this 
particular light source. The constant is referred to as the 
Einstein A coefficient, and has units 

.
[6] The above equation can be solved to give:
 
where 

 is the initial number of light sources in the excited state, 

 is the time and 

 is the radiative decay rate of the transition. The number of excited states 

 thus decays exponentially with time, similar to 
radioactive decay. After one lifetime, the number of excited states decays to 36.8% of its original value (

-time). The radiative decay rate 

 is inversely proportional to the lifetime 

:
 
Theory
Spontaneous transitions were not explainable within the framework of the 
Schrödinger equation,
 in which the electronic energy levels were quantized, but the 
electromagnetic field was not. Given that the eigenstates of an atom are
 properly diagonalized, the overlap of the wavefunctions between the 
excited state and the ground state of the atom is zero. Thus, in the 
absence of a quantized electromagnetic field, the excited state atom 
cannot decay to the ground state. In order to explain spontaneous 
transitions, quantum mechanics must be extended to a 
quantum field theory,
 wherein the electromagnetic field is quantized at every point in space.
 The quantum field theory of electrons and electromagnetic fields is 
known as 
quantum electrodynamics.
In quantum electrodynamics (or QED), the electromagnetic field has a 
ground state, the 
QED vacuum, which can mix with the excited stationary states of the atom.
[2] As a result of this interaction, the "stationary state" of the atom is no longer a true 
eigenstate
 of the combined system of the atom plus electromagnetic field. In 
particular, the electron transition from the excited state to the 
electronic ground state mixes with the transition of the electromagnetic
 field from the ground state to an excited state, a field state with one
 photon in it. Spontaneous emission in free space depends upon 
vacuum fluctuations to get started.
[7][8]
Although there is only one electronic transition from the excited 
state to ground state, there are many ways in which the electromagnetic 
field may go from the ground state to a one-photon state. That is, the 
electromagnetic field has infinitely more degrees of freedom, 
corresponding to the different directions in which the photon can be 
emitted. Equivalently, one might say that the 
phase space
 offered by the electromagnetic field is infinitely larger than that 
offered by the atom. This infinite degree of freedom for the emission of
 the photon results in the apparent irreversible decay, i.e., 
spontaneous emission.
In the presence of electromagnetic vacuum modes, the combined 
atom-vacuum system is explained by the superposition of the 
wavefunctions of the excited state atom with no photon and the ground 
state atom with a single emitted photon:
 
where 

 and 

 are the atomic excited state-electromagnetic vacuum wavefunction and its probability amplitude, 

 and 

 are the ground state atom with a single photon (of mode 

) wavefunction and its probability amplitude, 

 is the atomic transition frequency, and 

 is the frequency of the photon. The sum is over 

 and 

,
 which are the wavenumber and polarization of the emitted photon, 
respectively. As mentioned above, the emitted photon has a chance to be 
emitted with different wavenumbers and polarizations, and the resulting 
wavefunction is a superposition of these possibilities. To calculate the
 probability of the atom at the ground state (

), one needs to solve the time evolution of the wavefunction with an appropriate Hamiltonian.
[1]
 To solve for the transition amplitude, one needs to average over 
(integrate over) all the vacuum modes, since one must consider the 
probabilities that the emitted photon occupies various parts of phase 
space equally. The "spontaneously" emitted photon has infinite different
 modes to propagate into, thus the probability of the atom re-absorbing 
the photon and returning to the original state is negligible, making the
 atomic decay practically irreversible. Such irreversible time evolution
 of the atom-vacuum system is responsible for the apparent spontaneous 
decay of an excited atom. If one were to keep track of all the vacuum 
modes, the combined atom-vacuum system would undergo unitary time 
evolution, making the decay process reversible. 
Cavity quantum electrodynamics is one such system where the vacuum modes are modified resulting in the reversible decay process, see also 
Quantum revival. The theory of the spontaneous emission under the QED framework was first calculated by Weisskopf and Wigner.
In spectroscopy one can frequently find that atoms or molecules in 
the excited states dissipate their energy in the absence of any external
 source of photons. This is not spontaneous emission, but is actually 
nonradiative relaxation of the atoms or molecules caused by the 
fluctuation of the surrounding molecules present inside the bulk.
[clarification needed]
Rate of spontaneous emission
The rate of spontaneous emission (i.e., the radiative rate) can be described by 
Fermi's golden rule.
[9]
 The rate of emission depends on two factors: an 'atomic part', which 
describes the internal structure of the light source and a 'field part',
 which describes the density of electromagnetic modes of the 
environment. The atomic part describes the strength of a transition 
between two states in terms of transition moments. In a homogeneous 
medium, such as 
free space, the rate of spontaneous emission in the dipole approximation is given by:
 
 
where 

 is the emission frequency, 

 is the 
index of refraction, 

 is the 
transition dipole moment, 

 is the 
vacuum permittivity, 

 is the 
reduced Planck constant, 

 is the vacuum 
speed of light, and 

 is the 
fine structure constant.
[clarification needed]
 (This approximation breaks down in the case of inner shell electrons in
 high-Z atoms.) The above equation clearly shows that the rate of 
spontaneous emission in free space increases proportionally to 

.
In contrast with atoms, which have a discrete emission spectrum, 
quantum dots can be tuned continuously by changing their size. This property has been used to check the 

-frequency dependence of the spontaneous emission rate as described by Fermi's golden rule.
[10]
Radiative and nonradiative decay: the quantum efficiency
In the rate-equation above, it is assumed that decay of the number of excited states 

 only occurs under emission of light. In this case one speaks of full 
radiative decay and this means that the quantum efficiency is 100%. 
Besides radiative decay, which occurs under the emission of light, there
 is a second decay mechanism; nonradiative decay. To determine the total
 decay rate 

, radiative and nonradiative rates should be summed:
 
where 

 is the total decay rate, 

 is the radiative decay rate and 

 the nonradiative decay rate. The quantum efficiency (QE) is defined as 
the fraction of emission processes in which emission of light is 
involved:
 
In nonradiative relaxation, the energy is released as 
phonons, more commonly known as 
heat. Nonradiative relaxation occurs when the energy difference between the 
levels is very small, and these typically occur on a much faster time 
scale than radiative transitions. For many materials (for instance, 
semiconductors),
 electrons move quickly from a high energy level to a meta-stable level 
via small nonradiative transitions and then make the final move down to 
the bottom level via an optical or radiative transition. This final 
transition is the transition over the 
bandgap in semiconductors. Large nonradiative transitions do not occur frequently because the 
crystal structure generally cannot support large vibrations without destroying bonds (which generally doesn't happen for relaxation). 
Meta-stable states form a very important feature that is exploited in the construction of 
lasers. Specifically, since electrons decay slowly from them, they can be 
deliberately piled up in this state without too much loss and then 
stimulated emission can be used to boost an optical signal.