Schematic showing both terrestrial and geological sequestration of carbon dioxide emissions from a coal-fired plant.
Carbon sequestration is the process involved in carbon capture and the long-term storage of atmospheric carbon dioxide or other forms of carbon to mitigate or defer global warming. It has been proposed as a way to slow the atmospheric and marine accumulation of greenhouse gases, which are released by burning fossil fuels.
Carbon dioxide (CO
2) is naturally captured from the atmosphere through biological, chemical, and physical processes. Artificial processes have been devised to produce similar effects, including large-scale, artificial capture and sequestration of industrially produced CO
2 using subsurface saline aquifers, reservoirs, ocean water, aging oil fields, or other carbon sinks.
2) is naturally captured from the atmosphere through biological, chemical, and physical processes. Artificial processes have been devised to produce similar effects, including large-scale, artificial capture and sequestration of industrially produced CO
2 using subsurface saline aquifers, reservoirs, ocean water, aging oil fields, or other carbon sinks.
Description
Carbon sequestration is the process involved in carbon capture and the long-term storage of atmospheric carbon dioxide (CO
2) and may refer specifically to:
2) and may refer specifically to:
- "The process of removing carbon from the atmosphere and depositing it in a reservoir." When carried out deliberately, this may also be referred to as carbon dioxide removal, which is a form of geoengineering.
- Carbon capture and storage, where carbon dioxide is removed from flue gases (e.g., at power stations) before being stored in underground reservoirs.
- Natural biogeochemical cycling of carbon between the atmosphere and reservoirs, such as by chemical weathering of rocks.
Carbon dioxide may be captured as a pure by-product in processes related to petroleum refining or from flue gases from power generation. CO
2 sequestration includes the storage part of carbon capture and storage, which refers to large-scale, artificial capture and sequestration of industrially produced CO
2 using subsurface saline aquifers, reservoirs, ocean water, aging oil fields, or other carbon sinks.
2 sequestration includes the storage part of carbon capture and storage, which refers to large-scale, artificial capture and sequestration of industrially produced CO
2 using subsurface saline aquifers, reservoirs, ocean water, aging oil fields, or other carbon sinks.
Carbon sequestration describes long-term storage of carbon dioxide or other forms of carbon to either mitigate or defer global warming and avoid dangerous climate change. It has been proposed as a way to slow the atmospheric and marine accumulation of greenhouse gases, which are released by burning fossil fuels.
Carbon dioxide is naturally captured from the atmosphere through
biological, chemical or physical processes. Some artificial
sequestration techniques exploit these natural processes, while some use entirely artificial processes.
There are three ways that this sequestration can be carried out;
post-combustion capture, pre-combustion capture, and oxy-combustion. A
wide variety of separation techniques are being pursued, including gas
phase separation, absorption into a liquid, and adsorption on a solid,
as well as hybrid processes, such as adsorption/membrane systems. These
above processes basically will capture carbon emitting from power
plants, factories, fuel burning industries and so on.
Biological processes
An oceanic phytoplankton bloom in the South Atlantic Ocean, off the coast of Argentina. Encouraging such blooms with iron fertilization could lock up carbon on the seabed.
Biosequestration or carbon sequestration through biological processes affects the global carbon cycle. Examples include major climatic fluctuations, such as the Azolla event, which created the current Arctic climate. Such processes created fossil fuels, as well as clathrate and limestone. By manipulating such processes, geoengineers seek to enhance sequestration.
Peat production
Peat bogs
act as a sink for carbon due to the accumulation of partially decayed
biomass that would otherwise continue to decay completely. There is a
variance on how much the peatlands act as a carbon sink or carbon source
that can be linked to varying climates in different areas of the world
and different times of the year. By creating new bogs, or enhancing existing ones, the amount of carbon that is sequestered by bogs would increase.
Forestry
Reforestation is the replanting of trees on marginal crop and pasture lands to incorporate carbon from atmospheric CO
2 into biomass. For this process to succeed the carbon must not return to the atmosphere from mass burning or rotting when the trees die. To this end, land allotted to the trees must not be converted to other uses and management of the frequency of disturbances might be necessary in order to avoid extreme events. Alternatively, the wood from them must itself be sequestered, e.g., via biochar, bio-energy with carbon storage (BECS), landfill or 'stored' by use in e.g. construction. Short of growth in perpetuity, however, reforestation with long-lived trees (>100 years) will sequester carbon for a more graduated release, minimizing impact during the expected carbon crisis of the 21st century.
2 into biomass. For this process to succeed the carbon must not return to the atmosphere from mass burning or rotting when the trees die. To this end, land allotted to the trees must not be converted to other uses and management of the frequency of disturbances might be necessary in order to avoid extreme events. Alternatively, the wood from them must itself be sequestered, e.g., via biochar, bio-energy with carbon storage (BECS), landfill or 'stored' by use in e.g. construction. Short of growth in perpetuity, however, reforestation with long-lived trees (>100 years) will sequester carbon for a more graduated release, minimizing impact during the expected carbon crisis of the 21st century.
Urban forestry
Urban forestry
increases the amount of carbon taken up in cities by adding new tree
sites and the sequestration of carbon occurs over the lifetime of the
tree.
It is generally practiced and maintained on smaller scales, like in
cities. The results of urban forestry can have different results
depending on the type of vegetation that is being used, so it can
function as a sink but can also function as a source of emissions.
Along with sequestration by the plants which is difficult to measure
but seems to have little effect on the overall amount of carbon dioxide
that is uptaken, the vegetation can have indirect effects on carbon by
reducing need for energy consumption.
Wetland restoration
Wetland soil is an important carbon sink; 14.5% of the world's soil carbon is found in wetlands, while only 6% of the world's land is composed of wetlands.
Agriculture
Compared to natural vegetation, cropland soils are depleted in soil
organic carbon (SOC). When a soil is converted from natural land or semi
natural land, such as forests, woodlands, grasslands, steppes and
savannas, the SOC content in the soil reduces with about 30–40%.
This loss is due to the removal of plant material containing carbon, in
terms of harvests. When the land use changes, the carbon in the soil
will either increase or decrease, this change will continue until the
soil reaches a new equilibrium. Deviations from this equilibrium can
also be affected by variated climate.
The decreasing of SOC content can be counteracted by increasing the
carbon input, this can be done with several strategies, e.g. leave
harvest residues on the field, use manure as fertilizer or include
perennial crops in the rotation. Perennial crops have larger below
ground biomass fraction, which increases the SOC content.
Globally, soils are estimated to contain approximately 1,500 gigatons
of organic carbon to 1 m depth, more than the amount in vegetation and
the atmosphere.
Modification of agricultural practices is a recognized method of
carbon sequestration as soil can act as an effective carbon sink
offsetting as much as 20% of 2010 carbon dioxide emissions annually.
Carbon emission reduction methods in agriculture can be grouped
into two categories: reducing and/or displacing emissions and enhancing
carbon removal. Some of these reductions involve increasing the
efficiency of farm operations (e.g. more fuel-efficient equipment) while
some involve interruptions in the natural carbon cycle. Also, some
effective techniques (such as the elimination of stubble burning) can negatively impact other environmental concerns (increased herbicide use to control weeds not destroyed by burning).
Deep soil
Soils hold four times the amount of carbon stored in the atmosphere. About half of this is found deep within soils. About 90% of this deep soil C is stabilized by mineral-organic associations.
Reducing emissions
Increasing
yields and efficiency generally reduces emissions as well, since more
food results from the same or less effort. Techniques include more
accurate use of fertilizers, less soil disturbance, better irrigation, and crop strains bred for locally beneficial traits and increased yields.
Replacing more energy intensive farming operations can also reduce emissions. Reduced or no-till farming
requires less machine use and burns correspondingly less fuel per acre.
However, no-till usually increases use of weed-control chemicals and
the residue now left on the soil surface is more likely to release its CO
2 to the atmosphere as it decays, reducing the net carbon reduction.
2 to the atmosphere as it decays, reducing the net carbon reduction.
In practice, most farming operations that incorporate
post-harvest crop residues, wastes and byproducts back into the soil
provide a carbon storage benefit. This is particularly the case for practices such as field burning of stubble – rather than releasing almost all of the stored CO
2 to the atmosphere, tillage incorporates the biomass back into the soil.
2 to the atmosphere, tillage incorporates the biomass back into the soil.
Enhancing carbon removal
All crops absorb CO
2 during growth and release it after harvest. The goal of agricultural carbon removal is to use the crop and its relation to the carbon cycle to permanently sequester carbon within the soil. This is done by selecting farming methods that return biomass to the soil and enhance the conditions in which the carbon within the plants will be reduced to its elemental nature and stored in a stable state. Methods for accomplishing this include:
2 during growth and release it after harvest. The goal of agricultural carbon removal is to use the crop and its relation to the carbon cycle to permanently sequester carbon within the soil. This is done by selecting farming methods that return biomass to the soil and enhance the conditions in which the carbon within the plants will be reduced to its elemental nature and stored in a stable state. Methods for accomplishing this include:
- Use cover crops such as grasses and weeds as temporary cover between planting seasons
- Concentrate livestock in small paddocks for days at a time so they graze lightly but evenly. This encourages roots to grow deeper into the soil. Stock also till the soil with their hooves, grinding old grass and manures into the soil.
- Cover bare paddocks with hay or dead vegetation. This protects soil from the sun and allows the soil to hold more water and be more attractive to carbon-capturing microbes.
- Restore degraded land, which slows carbon release while returning the land to agriculture or other use.
Agricultural sequestration practices may have positive effects on soil, air, and water quality, be beneficial to wildlife, and expand food production. On degraded croplands, an increase of 1 ton of soil carbon pool may increase crop yield by 20 to 40 kilograms per hectare of wheat, 10 to 20 kg/ ha for maize, and 0.5 to 1 kg/ha for cowpeas.
The effects of soil sequestration can be reversed. If the soil is
disrupted or tillage practices are abandoned, the soil becomes a net
source of greenhouse gases. Typically after 15 to 30 years of
sequestration, soil becomes saturated and ceases to absorb carbon. This
implies that there is a global limit to the amount of carbon that soil
can hold.
Many factors affect the costs of carbon sequestration including
soil quality, transaction costs and various externalities such as
leakage and unforeseen environmental damage. Because reduction of
atmospheric CO
2 is a long-term concern, farmers can be reluctant to adopt more expensive agricultural techniques when there is not a clear crop, soil, or economic benefit. Governments such as Australia and New Zealand are considering allowing farmers to sell carbon credits once they document that they have sufficiently increased soil carbon content.
2 is a long-term concern, farmers can be reluctant to adopt more expensive agricultural techniques when there is not a clear crop, soil, or economic benefit. Governments such as Australia and New Zealand are considering allowing farmers to sell carbon credits once they document that they have sufficiently increased soil carbon content.
Iron fertilization
Ocean iron fertilization is an example of such a geoengineering technique. Iron fertilization attempts to encourage phytoplankton growth, which removes carbon from the atmosphere for at least a period of time. This technique is controversial due to limited understanding of its complete effects on the marine ecosystem, including side effects and possibly large deviations from expected behavior. Such effects potentially include release of nitrogen oxides, and disruption of the ocean's nutrient balance.
Natural iron fertilisation events (e.g., deposition of iron-rich
dust into ocean waters) can enhance carbon sequestration. Sperm whales
act as agents of iron fertilisation when they transport iron from the
deep ocean to the surface during prey consumption and defecation. Sperm
whales have been shown to increase the levels of primary production and
carbon export to the deep ocean by depositing iron rich feces into
surface waters of the Southern Ocean. The iron rich feces causes
phytoplankton to grow and take up more carbon from the atmosphere. When
the phytoplankton dies, some of it sinks to the deep ocean and takes the
atmospheric carbon with it. By reducing the abundance of sperm whales
in the Southern Ocean, whaling has resulted in an extra 200,000 tonnes
of carbon remaining in the atmosphere each year.
Urea fertilization
Ian Jones proposes fertilizing the ocean with urea, a nitrogen rich substance, to encourage phytoplankton growth.
Australian company Ocean Nourishment Corporation (ONC) plans to sink hundreds of tonnes of urea into the ocean to boost CO
2-absorbing phytoplankton growth as a way to combat climate change. In 2007, Sydney-based ONC completed an experiment involving 1 tonne of nitrogen in the Sulu Sea off the Philippines.
2-absorbing phytoplankton growth as a way to combat climate change. In 2007, Sydney-based ONC completed an experiment involving 1 tonne of nitrogen in the Sulu Sea off the Philippines.
Mixing layers
Encouraging various ocean layers to mix can move nutrients and dissolved gases around, offering avenues for geoengineering. Mixing may be achieved by placing large vertical pipes in the oceans to pump nutrient rich water to the surface, triggering blooms of algae, which store carbon when they grow and export carbon when they die. This produces results somewhat similar to iron fertilization. One side-effect is a short-term rise in CO
2, which limits its attractiveness.
2, which limits its attractiveness.
Seaweed
Seaweed grows very fast and can theoretically be harvested and processed to generate biomethane, via Anaerobic Digestion to generate electricity, via Cogeneration/CHP or as a replacement for natural gas.
One study suggested that if seaweed farms covered 9% of the ocean they
could produce enough biomethane to supply Earth's equivalent demand for
fossil fuel energy, remove 53 gigatons of CO2 per year from the atmosphere and sustainably produce 200 kg per year of fish, per person, for 10 billion people. Ideal species for such farming and conversion include Laminaria digitata, Fucus serratus and Saccharina latissima.
Physical processes
Biochar can be landfilled, used as a soil improver or burned using carbon capture and storage
Bio-energy with carbon capture and storage
Bio-energy with carbon capture and storage (BECCS) refers to biomass in power stations and boilers that use carbon capture and storage. The carbon sequestered by the biomass would be captured and stored, thus removing carbon dioxide from the atmosphere.
This technology is sometimes referred to as bio-energy with carbon storage, BECS, though this term can also refer to the carbon sequestration potential in other technologies, such as biochar.
Burial
Burying biomass (such as trees) directly, mimics the natural processes that created fossil fuels. Landfills also represent a physical method of sequestration.
Biochar burial
Biochar is charcoal created by pyrolysis of biomass waste. The resulting material is added to a landfill or used as a soil improver to create terra preta.
Addition of pyrogenic organic carbon (biochar) is a novel strategy to
increase the soil-C stock for the long-term and to mitigate
global-warming by offsetting the atmospheric C (up to 9.5 Pg C
annually).
In the soil, the carbon is unavailable for oxidation to CO
2 and consequential atmospheric release. This is one technique advocated by scientist James Lovelock, creator of the Gaia hypothesis. According to Simon Shackley, "people are talking more about something in the range of one to two billion tonnes a year."
2 and consequential atmospheric release. This is one technique advocated by scientist James Lovelock, creator of the Gaia hypothesis. According to Simon Shackley, "people are talking more about something in the range of one to two billion tonnes a year."
The mechanisms related to biochar are referred to as bio-energy with carbon storage, BECS.
Ocean storage
If CO2 were to be injected to the ocean bottom, the pressures would be great enough for CO2 to be in its liquid phase. The idea behind ocean injection would be to have stable, stationary pools of CO2 at the ocean floor. The ocean could potentially hold over a thousand billion tons of CO2.
However, this avenue of sequestration isn't being as actively pursued
because of concerns about the impact on ocean life, and concerns about
its stability.
River mouths bring large quantities of nutrients and dead
material from upriver into the ocean as part of the process that
eventually produces fossil fuels. Transporting material such as crop
waste out to sea and allowing it to sink exploits this idea to increase
carbon storage. International regulations on marine dumping may restrict or prevent use of this technique.
Geological sequestration
Geological sequestration refers to the storage of CO2 underground in depleted oil and gas reservoirs, saline formations, or deep, un-minable coal beds.
Once CO2 is captured from a gas or coal-fired power
plant, it would be compressed to ≈100 bar so that it would be a
supercritical fluid. In this fluid form, the CO2 would be easy to transport via pipeline to the place of storage. The CO2 would then be injected deep underground, typically around 1 km, where it would be stable for hundreds to millions of years. At these storage conditions, the density of supercritical CO2 is 600 to 800 kg / m3.
For consumers, the cost of electricity from a coal-fired power plant
with carbon capture and storage (CCS) is estimated to be 0.01–0.05 $ /
kWh higher than without CCS. For reference, the average cost of
electricity in the US in 2004 was 0.0762 $ / kWh. In other terms, the
cost of CCS would be 20–70 $/ton of CO2 captured. The transportation and injection of CO2 is relatively cheap, with the capture costs accounting for 70–80% of CCS costs.
The important parameters in determining a good site for carbon
storage are: rock porosity, rock permeability, absence of faults, and
geometry of rock layers. The medium in which the CO2 is to
be stored ideally has a high porosity and permeability, such as
sandstone or limestone. Sandstone can have a permeability ranging from 1
to 10−5 Darcy, and can have a porosity as high as ≈30%. The
porous rock must be capped by a layer of low permeability which acts as a
seal, or caprock, for the CO2. Shale is an example of a very good caprock, with a permeability of 10−5 to 10−9 Darcy. Once injected, the CO2
plume will rise via buoyant forces, since it is less dense than its
surroundings. Once it encounters a caprock, it will spread laterally
until it encounters a gap. If there are fault planes near the injection
zone, there is a possibility the CO2 could migrate along the
fault to the surface, leaking into the atmosphere, which would be
potentially dangerous to life in the surrounding area. Another danger
related to carbon sequestration is induced seismicity. If the injection
of CO2 creates pressures that are too high underground, the formation will fracture, causing an earthquake.
While trapped in a rock formation, CO2 can be in the
supercritical fluid phase or dissolve in groundwater/brine. It can also
react with minerals in the geologic formation to precipitate
carbonates.
Worldwide storage capacity in oil and gas reservoirs is estimated to be 675–900 Gt CO2, and in un-minable coal seams is estimated to be 15–200 Gt CO2. Deep saline formations have the largest capacity, which is estimated to be 1,000–10,000 Gt CO2. In the US, there is an estimated 160 Gt CO2 storage capacity.
There are a number of large-scale carbon capture and
sequestration projects that have demonstrated the viability and safety
of this method of carbon storage, which are summarized here by the Global CCS Institute. The dominant monitoring technique is
seismic imaging, where vibrations are generated that propagate through
the subsurface. The geologic structure can be imaged from the
refracted/reflected waves.
The first large-scale CO
2 sequestration project which began in 1996 is called Sleipner, and is located in the North Sea where Norway's StatoilHydro strips carbon dioxide from natural gas with amine solvents and disposed of this carbon dioxide in a deep saline aquifer. In 2000, a coal-fueled synthetic natural gas plant in Beulah, North Dakota, became the world's first coal-using plant to capture and store carbon dioxide, at the Weyburn-Midale Carbon Dioxide Project.
2 sequestration project which began in 1996 is called Sleipner, and is located in the North Sea where Norway's StatoilHydro strips carbon dioxide from natural gas with amine solvents and disposed of this carbon dioxide in a deep saline aquifer. In 2000, a coal-fueled synthetic natural gas plant in Beulah, North Dakota, became the world's first coal-using plant to capture and store carbon dioxide, at the Weyburn-Midale Carbon Dioxide Project.
CO
2 has been used extensively in enhanced crude oil recovery operations in the United States beginning in 1972. There are in excess of 10,000 wells that inject CO
2 in the state of Texas alone. The gas comes in part from anthropogenic sources, but is principally from large naturally occurring geologic formations of CO
2. It is transported to the oil-producing fields through a large network of over 5,000 kilometres (3,100 mi) of CO
2 pipelines. The use of CO
2 for enhanced oil recovery (EOR) methods in heavy oil reservoirs in the Western Canadian Sedimentary Basin (WCSB) has also been proposed. However, transport cost remains an important hurdle. An extensive CO
2 pipeline system does not yet exist in the WCSB. Athabasca oil sands mining that produces CO
2 is hundreds of kilometers north of the subsurface Heavy crude oil reservoirs that could most benefit from CO
2 injection.
2 has been used extensively in enhanced crude oil recovery operations in the United States beginning in 1972. There are in excess of 10,000 wells that inject CO
2 in the state of Texas alone. The gas comes in part from anthropogenic sources, but is principally from large naturally occurring geologic formations of CO
2. It is transported to the oil-producing fields through a large network of over 5,000 kilometres (3,100 mi) of CO
2 pipelines. The use of CO
2 for enhanced oil recovery (EOR) methods in heavy oil reservoirs in the Western Canadian Sedimentary Basin (WCSB) has also been proposed. However, transport cost remains an important hurdle. An extensive CO
2 pipeline system does not yet exist in the WCSB. Athabasca oil sands mining that produces CO
2 is hundreds of kilometers north of the subsurface Heavy crude oil reservoirs that could most benefit from CO
2 injection.
Chemical processes
Developed in the Netherlands, an electrocatalysis by a copper complex helps reduce carbon dioxide to oxalic acid; This conversion uses carbon dioxide as a feedstock to generate oxalic acid.
Mineral carbonation
Carbon, in the form of CO
2 can be removed from the atmosphere by chemical processes, and stored in stable carbonate mineral forms. This process is known as 'carbon sequestration by mineral carbonation' or mineral sequestration. The process involves reacting carbon dioxide with abundantly available metal oxides–either magnesium oxide (MgO) or calcium oxide (CaO)–to form stable carbonates. These reactions are exothermic and occur naturally (e.g., the weathering of rock over geologic time periods).
2 can be removed from the atmosphere by chemical processes, and stored in stable carbonate mineral forms. This process is known as 'carbon sequestration by mineral carbonation' or mineral sequestration. The process involves reacting carbon dioxide with abundantly available metal oxides–either magnesium oxide (MgO) or calcium oxide (CaO)–to form stable carbonates. These reactions are exothermic and occur naturally (e.g., the weathering of rock over geologic time periods).
- CaO + CO
2 → CaCO
3
- MgO + CO
2 → MgCO
3
Calcium and magnesium are found in nature typically as calcium and magnesium silicates (such as forsterite and serpentinite) and not as binary oxides. For forsterite and serpentine the reactions are:
- Mg
2SiO
4 + 2 CO
2 → 2 MgCO
3 + SiO
2
- Mg
3Si
2O
5(OH)
4+ 3 CO
2 → 3 MgCO
3 + 2 SiO
2 + 2 H
2O
The following table lists principal metal oxides of Earth's crust. Theoretically up to 22% of this mineral mass is able to form carbonates.
| Earthen Oxide | Percent of Crust | Carbonate | Enthalpy change (kJ/mol) |
|---|---|---|---|
| SiO 2 |
59.71 |
|
|
| Al 2O 3 |
15.41 |
|
|
| CaO | 4.90 | CaCO 3 |
−179 |
| MgO | 4.36 | MgCO 3 |
−117 |
| Na 2O |
3.55 | Na 2CO 3 |
|
| FeO | 3.52 | FeCO 3 |
|
| K 2O |
2.80 | K 2CO 3 |
|
| Fe 2O 3 |
2.63 | FeCO 3 |
|
|
|
21.76 | All Carbonates |
These reactions are slightly more favorable at low temperatures. This process occurs naturally over geologic time frames and is responsible for much of the Earth's surface limestone.
The reaction rate can be made faster however, by reacting at higher
temperatures and/or pressures, although this method requires some
additional energy. Alternatively, the mineral could be milled to
increase its surface area, and exposed to water and constant abrasion to
remove the inert Silica as could be achieved naturally by dumping
Olivine in the high energy surf of beaches. Experiments suggest the weathering process is reasonably quick (one year) given porous basaltic rocks.
CO
2 naturally reacts with peridotite rock in surface exposures of ophiolites, notably in Oman. It has been suggested that this process can be enhanced to carry out natural mineralisation of CO
2.
2 naturally reacts with peridotite rock in surface exposures of ophiolites, notably in Oman. It has been suggested that this process can be enhanced to carry out natural mineralisation of CO
2.
When CO
2 is dissolved in water and injected into hot basaltic rocks underground it has been shown that the CO
2 reacts with the basalt to form solid carbonate minerals. A test plant in Iceland started up in October 2017, extracting up to 50 tons of CO2 a year from the atmosphere and storing it underground in basaltic rock.
2 is dissolved in water and injected into hot basaltic rocks underground it has been shown that the CO
2 reacts with the basalt to form solid carbonate minerals. A test plant in Iceland started up in October 2017, extracting up to 50 tons of CO2 a year from the atmosphere and storing it underground in basaltic rock.
Researchers from British Columbia, developed a low cost process for the production of magnesite, also known as magnesium carbonate,
which can sequester CO2 from the air, or at the point of air pollution,
e.g. at a power plant. The crystals are naturally occurring, but
accumulation is usually very slow.
Industrial use
Traditional cement manufacture releases large amounts of carbon dioxide, but newly developed cement types from Novacem can absorb CO
2 from ambient air during hardening. A similar technique was pioneered by TecEco, which has been producing "EcoCement" since 2002. A Canadian startup CarbonCure takes captured CO2 and injects it into concrete as it's being mixed. Carbon Upcycling UCLA is another company that uses CO
2 in concrete. Their concrete product is called CO2NCRETE™, a concrete that hardens faster and is more eco-friendly than traditional concrete.
2 from ambient air during hardening. A similar technique was pioneered by TecEco, which has been producing "EcoCement" since 2002. A Canadian startup CarbonCure takes captured CO2 and injects it into concrete as it's being mixed. Carbon Upcycling UCLA is another company that uses CO
2 in concrete. Their concrete product is called CO2NCRETE™, a concrete that hardens faster and is more eco-friendly than traditional concrete.
In Estonia, oil shale ash, generated by power stations could be used as sorbents for CO
2 mineral sequestration. The amount of CO
2 captured averaged 60 to 65% of the carbonaceous CO
2 and 10 to 11% of the total CO
2 emissions.
2 mineral sequestration. The amount of CO
2 captured averaged 60 to 65% of the carbonaceous CO
2 and 10 to 11% of the total CO
2 emissions.
Chemical scrubbers
Various carbon dioxide scrubbing processes have been proposed to remove CO
2 from the air, usually using a variant of the Kraft process. Carbon dioxide scrubbing variants exist based on potassium carbonate, which can be used to create liquid fuels, or on sodium hydroxide. These notably include artificial trees proposed by Klaus Lackner to remove carbon dioxide from the atmosphere using chemical scrubbers.
2 from the air, usually using a variant of the Kraft process. Carbon dioxide scrubbing variants exist based on potassium carbonate, which can be used to create liquid fuels, or on sodium hydroxide. These notably include artificial trees proposed by Klaus Lackner to remove carbon dioxide from the atmosphere using chemical scrubbers.
Basalt storage
Carbon dioxide sequestration in basalt involves the injecting of CO
2 into deep-sea formations. The CO
2 first mixes with seawater and then reacts with the basalt, both of which are alkaline-rich elements. This reaction results in the release of Ca2+ and Mg2+ ions forming stable carbonate minerals.
2 into deep-sea formations. The CO
2 first mixes with seawater and then reacts with the basalt, both of which are alkaline-rich elements. This reaction results in the release of Ca2+ and Mg2+ ions forming stable carbonate minerals.
Underwater basalt offers a good alternative to other forms of
oceanic carbon storage because it has a number of trapping measures to
ensure added protection against leakage. These measures include
“geochemical, sediment, gravitational and hydrate formation.” Because CO
2 hydrate is denser than CO
2 in seawater, the risk of leakage is minimal. Injecting the CO
2 at depths greater than 2,700 meters (8,900 ft) ensures that the CO
2 has a greater density than seawater, causing it to sink.
2 hydrate is denser than CO
2 in seawater, the risk of leakage is minimal. Injecting the CO
2 at depths greater than 2,700 meters (8,900 ft) ensures that the CO
2 has a greater density than seawater, causing it to sink.
One possible injection site is Juan de Fuca plate. Researchers at the Lamont-Doherty Earth Observatory
found that this plate at the western coast of the United States has a
possible storage capacity of 208 gigatons. This could cover the entire current U.S. carbon emissions for over 100 years.
This process is undergoing tests as part of the CarbFix project, resulting in 95% of the injected 250 tons of CO2 to solidify into calcite in 2 years, using 25 tonnes of water per ton of CO2.
Acid neutralization
Carbon dioxide forms carbonic acid when dissolved in water, so ocean acidification
is a significant consequence of elevated carbon dioxide levels, and
limits the rate at which it can be absorbed into the ocean (the solubility pump). A variety of different bases have been suggested that could neutralize the acid and thus increase CO
2 absorption. For example, adding crushed limestone to oceans enhances the absorption of carbon dioxide. Another approach is to add sodium hydroxide to oceans which is produced by electrolysis of salt water or brine, while eliminating the waste hydrochloric acid by reaction with a volcanic silicate rock such as enstatite, effectively increasing the rate of natural weathering of these rocks to restore ocean pH.
2 absorption. For example, adding crushed limestone to oceans enhances the absorption of carbon dioxide. Another approach is to add sodium hydroxide to oceans which is produced by electrolysis of salt water or brine, while eliminating the waste hydrochloric acid by reaction with a volcanic silicate rock such as enstatite, effectively increasing the rate of natural weathering of these rocks to restore ocean pH.
Obstruction
Danger of leaks
Carbon dioxide may be stored deep underground. At depth, hydrostatic pressure
acts to keep it in a liquid state. Reservoir design faults, rock
fissures and tectonic processes may act to release the gas stored into
the ocean or atmosphere.
Financial costs
The
use of the technology would add an additional 1–5 cents of cost per
kilowatt hour, according to estimate made by the Intergovernmental Panel
on Climate Change. The financial costs of modern coal technology would
nearly double if use of CCS technology were to be required by
regulation.
The cost of CCS technology differs with the different types of capture
technologies being used and with the different sites that it is
implemented in, but the costs tend to increase with CCS capture
implementation.
One study conducted predicted that with new technologies these costs
could be lowered but would remain slightly higher than prices without
CCS technologies.
Energy requirements
The
energy requirements of sequestration processes may be significant. In
one paper, sequestration consumed 25 percent of the plant's rated 600
megawatt output capacity.
- After adding CO2 capture and compression, the capacity of the coal-fired power plant is reduced to 457 MW.
