In the study of past climates ("paleoclimatology"), climate proxies are preserved physical characteristics of the past that stand in for direct meteorological measurements and enable scientists to reconstruct the climatic conditions
over a longer fraction of the Earth's history. Reliable global records
of climate only began in the 1880s, and proxies provide the only means
for scientists to determine climatic patterns before record-keeping
began.
Examples of proxies include ice cores, tree rings, sub-fossil pollen, boreholes, corals, lake and ocean sediments, and carbonate speleothems.
The character of deposition or rate of growth of the proxies' material
has been influenced by the climatic conditions of the time in which they
were laid down or grew. Chemical traces produced by climatic changes,
such as quantities of particular isotopes,
can be recovered from proxies. Some proxies, such as gas bubbles
trapped in ice, enable traces of the ancient atmosphere to be recovered
and measured directly to provide a history of fluctuations in the
composition of the Earth's atmosphere.
To produce the most precise results, systematic cross-verification
between proxy indicators is necessary for accuracy in readings and
record-keeping.
Proxies can be combined to produce temperature reconstructions longer than the instrumental temperature record and can inform discussions of global warming
and climate history. The distribution of proxy records, just like the
instrumental record, is not at all uniform, with more records in the
northern hemisphere.
Proxies
In science, it is sometimes necessary to study a variable which
cannot be measured directly. This can be done by "proxy methods," in
which a variable which correlates with the variable of interest is
measured, and then used to infer the value of the variable of interest.
Proxy methods are of particular use in the study of the past climate,
beyond times when direct measurements of temperatures are available.
Most proxy records have to be calibrated against independent
temperature measurements, or against a more directly calibrated proxy,
during their period of overlap to estimate the relationship between
temperature and the proxy. The longer history of the proxy is then used
to reconstruct temperature from earlier periods.
Ice cores
Drilling
Ice cores are cylindrical samples from within ice sheets in the Greenland, Antarctic, and North American regions. First attempts of extraction occurred in 1956 as part of the International Geophysical Year. As original means of extraction, the U.S. Army's Cold Regions Research and Engineering Laboratory used an 80-foot (24 m)-long modified electrodrill in 1968 at Camp Century, Greenland, and Byrd Station, Antarctica. Their machinery could drill through 15–20 feet of ice in 40–50 minutes. From 1300 to 3,000 feet (910 m) in depth, core samples were 4 ¼ inches in diameter and 10 to 20 feet (6.1 m) long. Deeper samples of 15 to 20 feet (6.1 m) long were not uncommon. Every subsequent drilling team improves their method with each new effort.
Proxy
The ratio between the 16O and 18O water molecule isotopologues in an ice core helps determine past temperatures and snow accumulations. The heavier isotope (18O) condenses more readily as temperatures decrease and falls more easily as precipitation, while the lighter isotope (16O) needs colder conditions to precipitate. The farther north one needs to go to find elevated levels of the 18O isotopologue, the warmer the period.
In addition to oxygen isotopes, water contains hydrogen isotopes – 1H and 2H, usually referred to as H and D (for deuterium) – that are also used for temperature proxies. Normally, ice cores from Greenland are analyzed for δ18O and those from Antarctica for δ-deuterium. Those cores that analyze for both show a lack of agreement. (In the figure, δ18O is for the trapped air, not the ice. δD is for the ice.)
Air bubbles in the ice, which contain trapped greenhouse gases such as carbon dioxide and methane, are also helpful in determining past climate changes.
From 1989–1992, the European Greenland Ice Core Drilling Project drilled in central Greenland
at coordinates 72° 35' N, 37° 38' W. The ices in that core were 3840
years old at a depth of 770 m, 40,000 years old at 2521 m, and 200,000
years old or more at 3029 m bedrock. Ice cores in Antarctica can reveal the climate records for the past 650,000 years.
Location maps and a complete list of U.S. ice core drilling sites can be found on the website for the National Ice Core Laboratory: http://icecores.org/
Tree rings
Dendroclimatology is the science of determining past climates from trees, primarily from properties of the annual tree rings.
Tree rings are wider when conditions favor growth, narrower when times
are difficult. Other properties of the annual rings, such as maximum
latewood density (MXD) have been shown to be better proxies than simple
ring width. Using tree rings, scientists have estimated many local
climates for hundreds to thousands of years previous. By combining
multiple tree-ring studies (sometimes with other climate proxy records),
scientists have estimated past regional and global climates.
Fossil leaves
Paleoclimatologists
often use leaf teeth to reconstruct mean annual temperature in past
climates, and they use leaf size as a proxy for mean annual
precipitation. In the case of mean annual precipitation reconstructions, some researchers believe taphonomic processes cause smaller leaves to be overrepresented in the fossil record, which can bias reconstructions. However, recent research suggests that the leaf fossil record may not be significantly biased toward small leaves. New approaches retrieve data such as CO
2 content of past atmospheres from fossil leaf stomata and isotope composition, measuring cellular CO2 concentrations. A 2014 study was able to use the carbon-13 isotope ratios to estimate the CO2 amounts of the past 400 million years, the findings hint at a higher climate sensitivity to CO2 concentrations.
2 content of past atmospheres from fossil leaf stomata and isotope composition, measuring cellular CO2 concentrations. A 2014 study was able to use the carbon-13 isotope ratios to estimate the CO2 amounts of the past 400 million years, the findings hint at a higher climate sensitivity to CO2 concentrations.
Boreholes
Borehole
temperatures are used as temperature proxies. Since heat transfer
through the ground is slow, temperature measurements at a series of
different depths down the borehole, adjusted for the effect of rising
heat from inside the Earth, can be "inverted"
(a mathematical formula to solve matrix equations) to produce a
non-unique series of surface temperature values. The solution is
"non-unique" because there are multiple possible surface temperature
reconstructions that can produce the same borehole temperature profile.
In addition, due to physical limitations, the reconstructions are
inevitably "smeared", and become more smeared further back in time. When
reconstructing temperatures around 1,500 AD, boreholes have a temporal
resolution of a few centuries. At the start of the 20th Century, their
resolution is a few decades; hence they do not provide a useful check on
the instrumental temperature record. However, they are broadly comparable.
These confirmations have given paleoclimatologists the confidence that
they can measure the temperature of 500 years ago. This is concluded by a
depth scale of about 492 feet (150 meters) to measure the temperatures
from 100 years ago and 1,640 feet (500 meters) to measure the
temperatures from 1,000 years ago.
Boreholes have a great advantage over many other proxies in that
no calibration is required: they are actual temperatures. However, they
record surface temperature not the near-surface temperature (1.5 meter)
used for most "surface" weather observations. These can differ
substantially under extreme conditions or when there is surface snow. In
practice the effect on borehole temperature is believed to be generally
small. A second source of error is contamination of the well by
groundwater may affect the temperatures, since the water "carries" more
modern temperatures with it. This effect is believed to be generally
small, and more applicable at very humid sites. It does not apply in ice cores where the site remains frozen all year.
More than 600 boreholes, on all continents, have been used as proxies for reconstructing surface temperatures. The highest concentration of boreholes exist in North America and Europe. Their depths of drilling typically range from 200 to greater than 1,000 meters into the crust of the Earth or ice sheet.
A small number of boreholes have been drilled in the ice sheets;
the purity of the ice there permits longer reconstructions. Central
Greenland borehole temperatures show "a warming over the last 150 years
of approximately 1°C ± 0.2°C preceded by a few centuries of cool
conditions. Preceding this was a warm period centered around A.D. 1000,
which was warmer than the late 20th century by approximately 1°C." A
borehole in the Antarctica icecap shows that the "temperature at A.D. 1
[was] approximately 1°C warmer than the late 20th century".
Borehole temperatures in Greenland were responsible for an
important revision to the isotopic temperature reconstruction, revealing
that the former assumption that "spatial slope equals temporal slope"
was incorrect.
Corals
Ocean coral skeletal
rings, or bands, also share paleoclimatological information, similarly
to tree rings. In 2002, a report was published on the findings of Drs.
Lisa Greer and Peter Swart, associates of University of Miami at the time, in regard to stable oxygen isotopes in the calcium carbonate
of coral. Cooler temperatures tend to cause coral to use heavier
isotopes in its structure, while warmer temperatures result in more
normal oxygen isotopes being built into the coral structure. Denser water salinity also tends to contain the heavier isotope. Greer's coral sample from the Atlantic Ocean
was taken in 1994 and dated back to 1935. Greer recalls her
conclusions, "When we look at the averaged annual data from 1935 to
about 1994, we see it has the shape of a sine wave. It is periodic and has a significant pattern of oxygen isotope composition that has a peak at about every twelve to fifteen years." Surface water temperatures
have coincided by also peaking every twelve and a half years. However,
since recording this temperature has only been practiced for the last
fifty years, correlation between recorded water temperature and coral
structure can only be drawn so far back.
Pollen grains
Pollen can be found in sediments. Plants produce pollen
in large quantities and it is extremely resistant to decay. It is
possible to identify a plant species from its pollen grain. The
identified plant community of the area at the relative time from that
sediment layer, will provide information about the climatic condition.
The abundance of pollen of a given vegetation
period or year depends partly on the weather conditions of the previous
months, hence pollen density provides information on short-term
climatic conditions. The study of prehistoric pollen is palynology.
Dinoflagellate cysts
Dinoflagellates occur in most aquatic environments and during their
life cycle, some species produce highly resistant organic-walled cysts
for a dormancy period when environmental conditions are not appropriate
for growth. Their living depth is relatively shallow (dependent upon
light penetration), and closely coupled to diatoms on which they feed.
Their distribution patterns in surface waters are closely related to
physical characteristics of the water bodies, and nearshore assemblages
can also be distinguished from oceanic assemblages. The distribution of
dinocysts in sediments has been relatively well documented and has
contributed to understanding the average sea-surface conditions that
determine the distribution pattern and abundances of the taxa. Several studies, including and have compiled box and gravity cores in the North Pacific analyzing them
for palynological content to determine the distribution of dinocysts
and their relationships with sea surface temperature, salinity,
productivity and upwelling. Similarly, and
use a box core at 576.5 m of water depth from 1992 in the central Santa
Barbara Basin to determine oceanographic and climatic changes during
the past 40 kyr in the area.
Lake and ocean sediments
Similar to their study on other proxies, paleoclimatologists examine oxygen isotopes in the contents of ocean sediments. Likewise, they measure the layers of varve (deposited fine and coarse silt or clay) laminating lake sediments. Lake varves are primarily influenced by:
- Summer temperature, which shows the energy available to melt seasonal snow and ice
- Winter snowfall, which determines the level of disturbance to sediments when melting occurs
- Rainfall
Diatoms, foraminifera, radiolarians, ostracods, and Coccolithophores
are examples of biotic proxies for lake and ocean conditions that are
commonly used to reconstruct past climates. The distribution of the
species of these and other aquatic creatures preserved in the sediments
are useful proxies. The optimal conditions for species preserved in the
sediment act as clues. Researchers use these clues to reveal what the
climate and environment was like when the creatures died. The oxygen isotope ratios in their shells can also be used as proxies for temperature.
Water isotopes and temperature reconstruction
Ocean water is mostly H216O, with small amounts of HD16O and H218O, where D denotes deuterium, i.e. hydrogen with an extra neutron. In Vienna Standard Mean Ocean Water (VSMOW) the ratio of D to H is 155.76x10−6 and O-18 to O-16 is 2005.2x10−6. Isotope fractionation
occurs during changes between condensed and vapour phases: the vapour
pressure of heavier isotopes is lower, so vapour contains relatively
more of the lighter isotopes and when the vapour condenses the
precipitation preferentially contains heavier isotopes. The difference
from VSMOW is expressed as δ18O = 1000‰ ; and a similar formula for δD. δ values for precipitation are always negative.
The major influence on δ is the difference between ocean temperatures
where the moisture evaporated and the place where the final
precipitation occurred; since ocean temperatures are relatively stable
the δ value mostly reflects the temperature where precipitation occurs.
Taking into account that the precipitation forms above the inversion layer, we are left with a linear relation:
δ 18O = aT + b
This is empirically calibrated from measurements of temperature and δ as a = 0.67 ‰/°C for Greenland and 0.76 ‰/°C for East Antarctica. The calibration was initially done on the basis of spatial variations in temperature and it was assumed that this corresponded to temporal variations. More recently, borehole thermometry has shown that for glacial-interglacial variations, a = 0.33 ‰/°C, implying that glacial-interglacial temperature changes were twice as large as previously believed.
A study published in 2017 called the previous methodology to
reconstruct paleo ocean temperatures 100 million years ago into
question, suggesting it has been relatively stable during that time,
much colder.
Membrane lipids
A novel climate proxy obtained from peat (lignites, ancient peat) and soils, membrane lipids known as glycerol dialkyl glycerol tetraether (GDGT) is helping to study paleo environmental factors, which control relative distribution of differently branched GDGT isomers. The study authors note, "These branched membrane lipids are produced by an as yet unknown group of anaerobic soil bacteria." As of 2018, there is a decade of research demonstrating that in mineral soils the degree of methylation of bacteria (brGDGTs), helps to calculate mean annual air temperatures. This proxy method was used to study the climate of the early Palaeogene,
at the Cretaceous–Paleogene boundary, and researchers found that annual
air temperatures, over land and at mid-latitude, averaged about
23–29 °C (± 4.7 °C), which is 5–10 °C higher than most previous
findings.
Pseudoproxies
The
skill of algorithms used to combine proxy records into an overall
hemispheric temperature reconstruction may be tested using a technique
known as "pseudoproxies". In this method, output from a climate model
is sampled at locations corresponding to the known proxy network, and
the temperature record produced is compared to the (known) overall
temperature of the model.