Jasmine minirobots each smaller than 3 cm (1 in) in width
Microbotics (or microrobotics) is the field of miniature robotics,
in particular mobile robots with characteristic dimensions less than
1 mm. The term can also be used for robots capable of handling
micrometer size components.
History
Microbots were born thanks to the appearance of the microcontroller in the last decade of the 20th century, and the appearance of microelectromechanical systems (MEMS) on silicon, although many microbots do not use silicon for mechanical components other than sensors. The earliest research and conceptual design of such small robots was conducted in the early 1970s in (then) classified research for U.S. intelligence agencies. Applications envisioned at that time included prisoner of war
rescue assistance and electronic intercept missions. The underlying
miniaturization support technologies were not fully developed at that
time, so that progress in prototype
development was not immediately forthcoming from this early set of
calculations and concept design. As of 2008, the smallest microrobots
use a scratch drive actuator.
The development of wireless connections, especially Wi-Fi (i.e. in household networks)
has greatly increased the communication capacity of microbots, and
consequently their ability to coordinate with other microbots to carry
out more complex tasks. Indeed, much recent research has focused on
microbot communication, including a 1,024 robot swarm at Harvard University that assembles itself into various shapes; and manufacturing microbots at SRI International for DARPA's "MicroFactory for Macro Products" program that can build lightweight, high-strength structures.
Microbots called xenobots have also been built using biological tissues instead of metal and electronics.
Xenobots avoid some of the technological and environmental
complications of traditional microbots as they are self-powered,
biodegradable, and biocompatible.
Definitions
While the "micro" prefix has been used subjectively to mean "small", standardizing on length scales avoids confusion. Thus a nanorobot
would have characteristic dimensions at or below 1 micrometer, or
manipulate components on the 1 to 1000 nm size range. A microrobot
would have characteristic dimensions less than 1 millimeter, a millirobot would have dimensions less than a cm, a mini-robot would have dimensions less than 10 cm (4 in), and a small robot would have dimensions less than 100 cm (39 in).
Many sources also describe robots larger than 1 millimeter as microbots or robots larger than 1 micrometer as nanobots. See also: Category:Micro robots
Design considerations
The way
microrobots move around is a function of their purpose and necessary
size. At submicron sizes, the physical world demands rather bizarre
ways of getting around. The Reynolds number for airborne robots is less than unity; the viscous forces dominate the inertial forces, so “flying” could use the viscosity of air, rather than Bernoulli's principle of lift. Robots moving through fluids may require rotating flagella like the motile form of E. coli.
Hopping is stealthy and energy-efficient; it allows the robot to
negotiate the surfaces of a variety of terrains. Pioneering calculations
(Solem 1994) examined possible behaviors based on physical realities.
One of the major challenges in developing a microrobot is to achieve motion using a very limited power supply. The microrobots can use a small lightweight battery source like a coin cell or can scavenge power from the surrounding environment in the form of vibration or light energy. Microrobots are also now using biological motors as power sources, such as flagellated Serratia marcescens, to draw chemical power from the surrounding fluid to actuate the robotic device. These biorobots can be directly controlled by stimuli such as chemotaxis or galvanotaxis
with several control schemes available. A popular alternative to an
onboard battery is to power the robots using externally induced power.
Examples include the use of electromagnetic fields, ultrasound and light to activate and control micro robots.
The 2022 study focused on a photo-biocatalytic approach for the
"design of light-driven microrobots with applications in microbiology
and biomedicine".
Types and applications
Due to their small size, microbots are potentially very cheap, and could be used in large numbers (swarm robotics)
to explore environments which are too small or too dangerous for people
or larger robots. It is expected that microbots will be useful in
applications such as looking for survivors in collapsed buildings after
an earthquake or crawling through the digestive tract. What microbots
lack in brawn or computational power, they can make up for by using
large numbers, as in swarms of microbots.
Potential applications with demonstrated prototypes include:
Medical microbots
Biohybrid bacterial microswimmers
Biohybrid diatomite microswimmer drug delivery system
Diatom frustule surface functionalised with photoactivable molecules
(orange spheres) linked to vitamin B-12 (red sphere) acting as a
tumor-targeting tag. The system can be loaded with chemotherapeutic
drugs (light blue spheres), which can be selectively delivered to
colorectal cancer cells. In addition, diatomite microparticles can be
photoactivated to generate carbon monoxide or free radicals inducing
tumor cell apoptosis.
Biohybrid microswimmers, mainly composed of integrated biological
actuators and synthetic cargo carriers, have recently shown promise
toward minimally invasive theranostic applications. Various microorganisms, including bacteria, microalgae, and spermatozoids,
have been utilised to fabricate different biohybrid microswimmers with
advanced medical functionalities, such as autonomous control with
environmental stimuli for targeting, navigation through narrow gaps, and
accumulation to necrotic regions of tumor environments. Steerability of
the synthetic cargo carriers with long-range applied external fields,
such as acoustic or magnetic fields, and intrinsic taxis behaviours of the biological actuators toward various environmental stimuli, such as chemoattractants, pH,
and oxygen, make biohybrid microswimmers a promising candidate for a
broad range of medical active cargo delivery applications.
For example, there are biocompatible microalgae-based microrobots for active drug-delivery
in the lungs and the gastrointestinal tract, and magnetically guided
engineered bacterial microbots for 'precision targeting' for fighting cancerthat all have been tested with mice.
Jasmine minirobots each smaller than 3 cm (1 in) in width
Microbotics (or microrobotics) is the field of miniature robotics,
in particular mobile robots with characteristic dimensions less than
1 mm. The term can also be used for robots capable of handling
micrometer size components.
History
Microbots were born thanks to the appearance of the microcontroller in the last decade of the 20th century, and the appearance of microelectromechanical systems (MEMS) on silicon, although many microbots do not use silicon for mechanical components other than sensors. The earliest research and conceptual design of such small robots was conducted in the early 1970s in (then) classified research for U.S. intelligence agencies. Applications envisioned at that time included prisoner of war
rescue assistance and electronic intercept missions. The underlying
miniaturization support technologies were not fully developed at that
time, so that progress in prototype development was not immediately forthcoming from this early set of calculations and concept design. As of 2008, the smallest microrobots use a scratch drive actuator.
The development of wireless connections, especially Wi-Fi (i.e. in household networks)
has greatly increased the communication capacity of microbots, and
consequently their ability to coordinate with other microbots to carry
out more complex tasks. Indeed, much recent research has focused on
microbot communication, including a 1,024 robot swarm at Harvard University that assembles itself into various shapes; and manufacturing microbots at SRI International for DARPA's "MicroFactory for Macro Products" program that can build lightweight, high-strength structures.
Microbots called xenobots have also been built using biological tissues instead of metal and electronics.
Xenobots avoid some of the technological and environmental
complications of traditional microbots as they are self-powered,
biodegradable, and biocompatible.
Definitions
While the "micro" prefix has been used subjectively to mean "small", standardizing on length scales avoids confusion. Thus a nanorobot would have characteristic dimensions at or below 1 micrometer, or manipulate components on the 1 to 1000 nm size range. A microrobot would have characteristic dimensions less than 1 millimeter, a millirobot would have dimensions less than a cm, a mini-robot would have dimensions less than 10 cm (4 in), and a small robot would have dimensions less than 100 cm (39 in).
Many sources also describe robots larger than 1 millimeter as microbots or robots larger than 1 micrometer as nanobots. See also: Category:Micro robots
Design considerations
The way
microrobots move around is a function of their purpose and necessary
size. At submicron sizes, the physical world demands rather bizarre
ways of getting around. The Reynolds number for airborne robots is less than unity; the viscous forces dominate the inertial forces, so “flying” could use the viscosity of air, rather than Bernoulli's principle of lift. Robots moving through fluids may require rotating flagella like the motile form of E. coli. Hopping is stealthy and energy-efficient; it allows the robot to negotiate the surfaces of a variety of terrains. Pioneering calculations (Solem 1994) examined possible behaviors based on physical realities.
One of the major challenges in developing a microrobot is to achieve motion using a very limited power supply. The microrobots can use a small lightweight battery source like a coin cell or can scavenge power from the surrounding environment in the form of vibration or light energy. Microrobots are also now using biological motors as power sources, such as flagellated Serratia marcescens, to draw chemical power from the surrounding fluid to actuate the robotic device. These biorobots can be directly controlled by stimuli such as chemotaxis or galvanotaxis
with several control schemes available. A popular alternative to an
onboard battery is to power the robots using externally induced power.
Examples include the use of electromagnetic fields, ultrasound and light to activate and control micro robots.
The 2022 study focused on a photo-biocatalytic approach for the
"design of light-driven microrobots with applications in microbiology
and biomedicine".
Types and applications
Due to their small size, microbots are potentially very cheap, and could be used in large numbers (swarm robotics)
to explore environments which are too small or too dangerous for people
or larger robots. It is expected that microbots will be useful in
applications such as looking for survivors in collapsed buildings after
an earthquake or crawling through the digestive tract. What microbots
lack in brawn or computational power, they can make up for by using
large numbers, as in swarms of microbots.
Potential applications with demonstrated prototypes include:
Medical microbots
Biohybrid bacterial microswimmers
Biohybrid diatomite microswimmer drug delivery system
Diatom frustule surface functionalised with photoactivable molecules
(orange spheres) linked to vitamin B-12 (red sphere) acting as a
tumor-targeting tag. The system can be loaded with chemotherapeutic
drugs (light blue spheres), which can be selectively delivered to
colorectal cancer cells. In addition, diatomite microparticles can be
photoactivated to generate carbon monoxide or free radicals inducing
tumor cell apoptosis.
Biohybrid microswimmers, mainly composed of integrated biological
actuators and synthetic cargo carriers, have recently shown promise
toward minimally invasive theranostic applications. Various microorganisms, including bacteria, microalgae, and spermatozoids,
have been utilised to fabricate different biohybrid microswimmers with
advanced medical functionalities, such as autonomous control with
environmental stimuli for targeting, navigation through narrow gaps, and
accumulation to necrotic regions of tumor environments. Steerability of the synthetic cargo carriers with long-range applied external fields, such as acoustic or magnetic fields, and intrinsic taxis behaviours of the biological actuators toward various environmental stimuli, such as chemoattractants, pH, and oxygen, make biohybrid microswimmers a promising candidate for a broad range of medical active cargo delivery applications.
For example, there are biocompatible microalgae-based microrobots for active drug-delivery in the lungs and the gastrointestinal tract, and magnetically guided engineered bacterial microbots for 'precision targeting' for fighting cancerthat all have been tested with mice.
.png)
