| Bone | |
|---|---|
A bone dating from the Pleistocene Ice Age of an extinct species of elephant.
| |
A scanning electronic micrograph of bone at 10,000× magnification.
| |
| Identifiers | |
| MeSH | D001842 |
| TA | A02.0.00.000 |
| TH | H3.01.00.0.00001 |
| FMA | 30317 |
A bone is a rigid organ that constitutes part of the vertebrate skeleton in animals. Bones protect the various organs of the body, produce red and white blood cells, store minerals, provide structure and support for the body, and enable mobility. Bones come in a variety of shapes and sizes and have a complex internal and external structure. They are lightweight yet strong and hard, and serve multiple functions.
Bone tissue (osseous tissue) is a hard tissue, a type of dense connective tissue. It has a honeycomb-like matrix internally, which helps to give the bone rigidity. Bone tissue is made up of different types of bone cells. Osteoblasts and osteocytes are involved in the formation and mineralization of bone; osteoclasts are involved in the resorption of bone tissue. Modified (flattened) osteoblasts become the lining cells that form a protective layer on the bone surface. The mineralised matrix of bone tissue has an organic component of mainly collagen called ossein and an inorganic component of bone mineral made up of various salts. Bone tissue is a mineralized tissue of two types, cortical bone and cancellous bone. Other types of tissue found in bones include bone marrow, endosteum, periosteum, nerves, blood vessels and cartilage.
In the human body at birth, there are over 300 bones, but many of these fuse together during development, leaving a total of 212 separate bones in the adult, not counting numerous small sesamoid bones. The largest bone in the body is the femur or thigh-bone, and the smallest is the stapes in the middle ear.
The Greek word for bone is ὀστέον ("osteon"), hence the many terms that use it as a prefix – such as osteopathy.
Structure
Cross-section of bone
Bone is not uniformly solid, but consists of a flexible matrix
(about 30%) and bound minerals (about 70%) which are intricately woven
and endlessly remodeled by a group of specialized bone cells. Their
unique composition and design allows bones to be relatively hard and strong, while remaining lightweight.
Bone matrix is 90 to 95% composed of elastic collagen fibers, also known as ossein, and the remainder is ground substance. The elasticity of collagen improves fracture resistance. The matrix is hardened by the binding of inorganic mineral salt calcium phosphate in a chemical arrangement known as calcium hydroxylapatite. It is the bone mineralization that give bones rigidity.
Bone is actively constructed and remodeled throughout life by
special bone cells known as osteoblasts and osteoclasts. Within any
single bone, the tissue is woven into two main patterns, known as
cortical and cancellous bone, and each with different appearance and
characteristics.
Cortical bone
Cross-section details of a long bone
The hard outer layer of bones is composed of cortical bone
also called compact bone being much denser than cancellous bone. It
forms the hard exterior (cortex) of bones. The cortical bone gives bone
its smooth, white, and solid appearance, and accounts for 80% of the
total bone mass of an adult human skeleton.
It facilitates bone's main functions- to support the whole body,
protect organs, provide levers for movement, and store and release
chemical elements, mainly calcium. It consists of multiple microscopic
columns, each called an osteon. Each column is multiple layers of osteoblasts and osteocytes around a central canal called the haversian canal. Volkmann's canals
at right angles connect the osteons together. The columns are
metabolically active, and as bone is reabsorbed and created the nature
and location of the cells within the osteon will change. Cortical bone
is covered by a periosteum on its outer surface, and an endosteum on its inner surface. The endosteum is the boundary between the cortical bone and the cancellous bone. The primary anatomical and functional unit of cortical bone is the osteon.
Cancellous bone
Micrograph of cancellous bone
Cancellous bone, also called trabecular or spongy bone, is the internal tissue of the skeletal bone and is an open cell porous network. Cancellous bone has a higher surface-area-to-volume ratio
than cortical bone because it is less dense. This makes it weaker and
more flexible. The greater surface area also makes it suitable for
metabolic activities such as the exchange of calcium ions. Cancellous
bone is typically found at the ends of long bones, near joints and in
the interior of vertebrae. Cancellous bone is highly vascular and often contains red bone marrow where hematopoiesis, the production of blood cells, occurs. The primary anatomical and functional unit of cancellous bone is the trabecula. The trabeculae are aligned towards the mechanical load distribution that a bone experiences within long bones such as the femur. As far as short bones are concerned, trabecular alignment has been studied in the vertebral pedicle. Thin formations of osteoblasts covered in endosteum create an irregular network of spaces, known as trabeculae. Within these spaces are bone marrow and hematopoietic stem cells that give rise to platelets, red blood cells and white blood cells.
Trabecular marrow is composed of a network of rod- and plate-like
elements that make the overall organ lighter and allow room for blood
vessels and marrow. Trabecular bone accounts for the remaining 20% of
total bone mass but has nearly ten times the surface area of compact
bone.
The words cancellous and trabecular refer to the
tiny lattice-shaped units (trabeculae) that form the tissue. It was
first illustrated accurately in the engravings of Crisóstomo Martinez.
Bone marrow
Bone marrow, also known as myeloid tissue in red bone marrow, can be found in almost any bone that holds cancellous tissue. In newborns, all such bones are filled exclusively with red marrow or hematopoietic marrow, but as the child ages the hematopoietic fraction decreases in quantity and the fatty/ yellow fraction called marrow adipose tissue (MAT) increases in quantity. In adults, red marrow is mostly found in the bone marrow of the femur, the ribs, the vertebrae and pelvic bones.
Bone cells
Bone cells
Bone is a metabolically active tissue composed of several types of cells. These cells include osteoblasts, which are involved in the creation and mineralization of bone tissue, osteocytes, and osteoclasts, which are involved in the reabsorption of bone tissue. Osteoblasts and osteocytes are derived from osteoprogenitor cells, but osteoclasts are derived from the same cells that differentiate to form macrophages and monocytes. Within the marrow of the bone there are also hematopoietic stem cells. These cells give rise to other cells, including white blood cells, red blood cells, and platelets.
Osteoblast
Light micrograph of decalcified cancellous bone displaying osteoblasts actively synthesizing osteoid, containing two osteocytes.
Osteoblasts are mononucleate bone-forming cells. They are located on the surface of osteon seams and make a protein mixture known as osteoid, which mineralizes to become bone.
The osteoid seam is a narrow region of newly formed organic matrix, not
yet mineralized, located on the surface of a bone. Osteoid is primarily
composed of Type I collagen. Osteoblasts also manufacture hormones, such as prostaglandins,
to act on the bone itself. The osteoblast creates and repairs new bone
by actually building around itself. First, the osteoblast puts up collagen
fibers. These collagen fibers are used as a framework for the
osteoblasts' work. The osteoblast then deposits calcium phosphate which
is hardened by hydroxide and bicarbonate ions. The brand new bone created by the osteoblast is called osteoid.
Once the osteoblast is finished working it is actually trapped inside
the bone once it hardens. When the osteoblast becomes trapped, it
becomes known as an osteocyte.
Other osteoblasts remain on the top of the new bone and are used to
protect the underlying bone, these become known as lining cells.
Osteocyte
Osteocytes are mostly inactive osteoblasts.
Osteocytes originate from osteoblasts that have migrated into and
become trapped and surrounded by bone matrix that they themselves
produced. The spaces they occupy are known as lacunae.
Osteocytes have many processes that reach out to meet osteoblasts and
other osteocytes probably for the purposes of communication.
Osteocytes remain in contact with other cells in the bone through gap
junctions—coupled cell processes—which pass through small channels in
the bone matrix called the canaliculi.
Osteoclast
Osteoclasts are very large multinucleate cells that are responsible for the breakdown of bones by the process of bone resorption. New bone is then formed by the osteoblasts. Bone is constantly remodelled by the resorption of osteoclasts and created by osteoblasts. Osteoclasts are large cells with multiple nuclei located on bone surfaces in what are called Howship's lacunae (or resorption pits). These lacunae are the result of surrounding bone tissue that has been reabsorbed. Because the osteoclasts are derived from a monocyte stem-cell lineage, they are equipped with phagocytic-like mechanisms similar to circulating macrophages. Osteoclasts mature and/or migrate to discrete bone surfaces. Upon arrival, active enzymes, such as tartrate resistant acid phosphatase, are secreted against the mineral substrate. The reabsorption of bone by osteoclasts also plays a role in calcium homeostasis.
Extracellular matrix
Bones consist of living cells embedded in a mineralized organic matrix. This matrix consists of organic components, mainly type I collagen – "organic" referring to materials produced as a result of the human body – and inorganic components, primarily hydroxyapatite and other salts of calcium and phosphate. Above 30% of the acellular part of bone consists of the organic components, and 70% of salts. The collagen fibers give bone its tensile strength, and the interspersed crystals of hydroxyapatite give bone its compressive strength. These effects are synergistic.
The inorganic composition of bone (bone mineral) is primarily formed from salts of calcium and phosphate, the major salt being hydroxyapatite (Ca10(PO4)6(OH)2). The exact composition of the matrix may be subject to change over time due to nutrition and biomineralization, with the ratio of calcium to phosphate varying between 1.3 and 2.0 (per weight), and trace minerals such as magnesium, sodium, potassium and carbonate also being found.
Type I collagen composes 90–95% of the organic matrix, with remainder of the matrix being a homogenous liquid called ground substance consisting of proteoglycans such as hyaluronic acid and chondroitin sulfate, as well as non-collagenous proteins such as osteocalcin, osteopontin or bone sialoprotein.
Collagen consists of strands of repeating units, which give bone
tensile strength, and are arranged in an overlapping fashion that
prevents shear stress. The function of ground substance is not fully
known. Two types of bone can be identified microscopically according to the arrangement of collagen: woven and lamellar.
- Woven bone, (also known as fibrous bone) which is characterized by a haphazard organization of collagen fibers and is mechanically weak.
- Lamellar bone, which has a regular parallel alignment of collagen into sheets ("lamellae") and is mechanically strong.
Transmission electron micrograph of decalcified woven bone matrix displaying characteristic irregular orientation of collagen fibers.
Woven bone is produced when osteoblasts produce osteoid rapidly, which occurs initially in all fetal bones, but is later replaced by more resilient lamellar bone. In adults woven bone is created after fractures or in Paget's disease.
Woven bone is weaker, with a smaller number of randomly oriented
collagen fibers, but forms quickly; it is for this appearance of the
fibrous matrix that the bone is termed woven. It is soon replaced by lamellar bone, which is highly organized in concentric
sheets with a much lower proportion of osteocytes to surrounding
tissue. Lamellar bone, which makes its first appearance in humans in the
fetus during the third trimester,
is stronger and filled with many collagen fibers parallel to other
fibers in the same layer (these parallel columns are called osteons).
In cross-section, the fibers run in opposite directions in alternating layers, much like in plywood, assisting in the bone's ability to resist torsion
forces. After a fracture, woven bone forms initially and is gradually
replaced by lamellar bone during a process known as "bony substitution."
Compared to woven bone, lamellar bone formation takes place more
slowly. The orderly deposition of collagen fibers restricts the
formation of osteoid to about 1 to 2 µm per day. Lamellar bone also requires a relatively flat surface to lay the collagen fibers in parallel or concentric layers.
Deposition
The extracellular matrix of bone is laid down by osteoblasts,
which secrete both collagen and ground substance. These synthesise
collagen within the cell, and then secrete collagen fibrils. The
collagen fibers rapidly polymerise
to form collagen strands. At this stage they are not yet mineralised,
and are called "osteoid". Around the strands calcium and phosphate precipitate on the surface of these strands, within days to weeks becoming crystals of hydroxyapatite.
In order to mineralise the bone, the osteoblasts secrete vesicles containing alkaline phosphatase.
This cleaves the phosphate groups and acts as the foci for calcium and
phosphate deposition. The vesicles then rupture and act as a centre for
crystals to grow on. More particularly, bone mineral is formed from
globular and plate structures.
Types
Structure of a long bone
There are five types of bones in the human body: long, short, flat, irregular, and sesamoid.
- Long bones are characterized by a shaft, the diaphysis, that is much longer than its width; and by an epiphysis, a rounded head at each end of the shaft. They are made up mostly of compact bone, with lesser amounts of marrow, located within the medullary cavity, and areas of spongy, cancellous bone at the ends of the bones. Most bones of the limbs, including those of the fingers and toes, are long bones. The exceptions are the eight carpal bones of the wrist, the seven articulating tarsal bones of the ankle and the sesamoid bone of the kneecap. Long bones such as the clavicle, that have a differently shaped shaft or ends are also called modified long bones.
- Short bones are roughly cube-shaped, and have only a thin layer of compact bone surrounding a spongy interior. The bones of the wrist and ankle are short bones.
- Flat bones are thin and generally curved, with two parallel layers of compact bones sandwiching a layer of spongy bone. Most of the bones of the skull are flat bones, as is the sternum.
- Sesamoid bones are bones embedded in tendons. Since they act to hold the tendon further away from the joint, the angle of the tendon is increased and thus the leverage of the muscle is increased. Examples of sesamoid bones are the patella and the pisiform.
- Irregular bones do not fit into the above categories. They consist of thin layers of compact bone surrounding a spongy interior. As implied by the name, their shapes are irregular and complicated. Often this irregular shape is due to their many centers of ossification or because they contain bony sinuses. The bones of the spine, pelvis, and some bones of the skull are irregular bones. Examples include the ethmoid and sphenoid bones.
Terminology
In the study of anatomy, anatomists use a number of anatomical terms to describe the appearance, shape and function of bones. Other anatomical terms are also used to describe the location of bones. Like other anatomical terms, many of these derive from Latin and Greek.
Some anatomists still use Latin to refer to bones. The term "osseous",
and the prefix "osteo-", referring to things related to bone, are still
used commonly today.
Some examples of terms used to describe bones include the term
"foramen" to describe a hole through which something passes, and a
"canal" or "meatus" to describe a tunnel-like structure. A protrusion
from a bone can be called a number of terms, including a "condyle",
"crest", "spine", "eminence", "tubercle" or "tuberosity", depending on
the protrusion's shape and location. In general, long bones are said to have a "head", "neck", and "body".
When two bones join together, they are said to "articulate". If
the two bones have a fibrous connection and are relatively immobile,
then the joint is called a "suture".
Development
Endochondral ossification
.jpg)
Section through a juvenile knee joint (rat) showing the cartilagineous growth plates
The formation of bone is called ossification. During the fetal stage of development this occurs by two processes: intramembranous ossification and endochondral ossification. Intramembranous ossification involves the formation of bone from connective tissue whereas endochondral ossification involves the formation of bone from cartilage.
Intramembranous ossification mainly occurs during formation of the flat bones of the skull but also the mandible, maxilla, and clavicles; the bone is formed from connective tissue such as mesenchyme tissue rather than from cartilage. The process includes: the development of the ossification center, calcification, trabeculae formation and the development of the periosteum.
Endochondral ossification occurs in long bones and most
other bones in the body; it involves the development of bone from
cartilage. This process includes the development of a cartilage model,
its growth and development, development of the primary and secondary ossification centers, and the formation of articular cartilage and the epiphyseal plates.
Endochondral ossification begins with points in the cartilage
called "primary ossification centers." They mostly appear during fetal
development, though a few short bones begin their primary ossification
after birth.
They are responsible for the formation of the diaphyses of long bones,
short bones and certain parts of irregular bones. Secondary ossification
occurs after birth, and forms the epiphyses
of long bones and the extremities of irregular and flat bones. The
diaphysis and both epiphyses of a long bone are separated by a growing
zone of cartilage (the epiphyseal plate).
At skeletal maturity (18 to 25 years of age), all of the cartilage is
replaced by bone, fusing the diaphysis and both epiphyses together
(epiphyseal closure).
In the upper limbs, only the diaphyses of the long bones and scapula
are ossified. The epiphyses, carpal bones, coracoid process, medial
border of the scapula, and acromion are still cartilaginous.
The following steps are followed in the conversion of cartilage to bone:
- Zone of reserve cartilage. This region, farthest from the marrow cavity, consists of typical hyaline cartilage that as yet shows no sign of transforming into bone.
- Zone of cell proliferation. A little closer to the marrow cavity, chondrocytes multiply and arrange themselves into longitudinal columns of flattened lacunae.
- Zone of cell hypertrophy. Next, the chondrocytes cease to divide and begin to hypertrophy (enlarge), much like they do in the primary ossification center of the fetus. The walls of the matrix between lacunae become very thin.
- Zone of calcification. Minerals are deposited in the matrix between the columns of lacunae and calcify the cartilage. These are not the permanent mineral deposits of bone, but only a temporary support for the cartilage that would otherwise soon be weakened by the breakdown of the enlarged lacunae.
- Zone of bone deposition. Within each column, the walls between the lacunae break down and the chondrocytes die. This converts each column into a longitudinal channel, which is immediately invaded by blood vessels and marrow from the marrow cavity. Osteoblasts line up along the walls of these channels and begin depositing concentric lamellae of matrix, while osteoclasts dissolve the temporarily calcified cartilage.
Function
Synthetic
|
Metabolic
|
Bones have a variety of functions:
Mechanical
Bones serve a variety of mechanical functions. Together the bones in the body form the skeleton. They provide a frame to keep the body supported, and an attachment point for skeletal muscles, tendons, ligaments and joints,
which function together to generate and transfer forces so that
individual body parts or the whole body can be manipulated in
three-dimensional space (the interaction between bone and muscle is
studied in biomechanics).
Bones protect internal organs, such as the skull protecting the brain or the ribs protecting the heart and lungs. Because of the way that bone is formed, bone has a high compressive strength of about 170 MPa (1800 kgf/cm²), poor tensile strength of 104–121 MPa, and a very low shear stress strength (51.6 MPa).
This means that bone resists pushing(compressional) stress well, resist
pulling(tensional) stress less well, but only poorly resists shear
stress (such as due to torsional loads). While bone is essentially brittle, bone does have a significant degree of elasticity, contributed chiefly by collagen. The macroscopic yield strength of cancellous bone has been investigated using high resolution computer models.
Mechanically, bones also have a special role in hearing. The ossicles are three small bones in the middle ear which are involved in sound transduction.
Synthetic
The cancellous part of bones contain bone marrow. Bone marrow produces blood cells in a process called hematopoiesis. Blood cells that are created in bone marrow include red blood cells, platelets and white blood cells. Progenitor cells such as the hematopoietic stem cell divide in a process called mitosis to produce precursor cells. These include precursors which eventually give rise to white blood cells, and erythroblasts which give rise to red blood cells. Unlike red and white blood cells, created by mitosis, platelets are shed from very large cells called megakaryocytes. This process of progressive differentiation occurs within the bone marrow. After the cells are matured, they enter the circulation. Every day, over 2.5 billion red blood cells and platelets, and 50–100 billion granulocytes are produced in this way.
As well as creating cells, bone marrow is also one of the major sites where defective or aged red blood cells are destroyed.
Metabolic
- Mineral storage — bones act as reserves of minerals important for the body, most notably calcium and phosphorus.
°Determined by the species, age, and the type of bone, bone cells make up to 15 percent of the bone. Growth factor storage — mineralized bone matrix stores important growth factors such as insulin-like growth factors, transforming growth factor, bone morphogenetic proteins and others.
- Fat storage —marrow adipose tissue (MAT) acts as a storage reserve of fatty acids.
- Acid-base balance — bone buffers the blood against excessive pH changes by absorbing or releasing alkaline salts.
- Detoxification — bone tissues can also store heavy metals and other foreign elements, removing them from the blood and reducing their effects on other tissues. These can later be gradually released for excretion.
- Endocrine organ — bone controls phosphate metabolism by releasing fibroblast growth factor – 23 (FGF-23), which acts on kidneys to reduce phosphate reabsorption. Bone cells also release a hormone called osteocalcin, which contributes to the regulation of blood sugar (glucose) and fat deposition. Osteocalcin increases both the insulin secretion and sensitivity, in addition to boosting the number of insulin-producing cells and reducing stores of fat.
- Calcium balance—The process of bone resorption by the osteoclasts releases stored calcium into the systemic circulation and is an important process in regulating calcium balance. As bone formation actively fixes circulating calcium in its mineral form, removing it from the bloodstream, resorption actively unfixes it thereby increasing circulating calcium levels. These processes occur in tandem at site-specific locations.
Remodeling
Bone is constantly being created and replaced in a process known as remodeling.
This ongoing turnover of bone is a process of resorption followed by
replacement of bone with little change in shape. This is accomplished
through osteoblasts and osteoclasts. Cells are stimulated by a variety
of signals, and together referred to as a remodeling unit. Approximately 10% of the skeletal mass of an adult is remodelled each year. The purpose of remodeling is to regulate calcium homeostasis, repair microdamaged bones from everyday stress, and to shape the skeleton during growth. Repeated stress, such as weight-bearing exercise or bone healing, results in the bone thickening at the points of maximum stress (Wolff's law). It has been hypothesized that this is a result of bone's piezoelectric properties, which cause bone to generate small electrical potentials under stress.
The action of osteoblasts and osteoclasts are controlled by a number of chemical enzymes
that either promote or inhibit the activity of the bone remodeling
cells, controlling the rate at which bone is made, destroyed, or changed
in shape. The cells also use paracrine signalling to control the activity of each other. For example, the rate at which osteoclasts resorb bone is inhibited by calcitonin and osteoprotegerin. Calcitonin is produced by parafollicular cells in the thyroid gland,
and can bind to receptors on osteoclasts to directly inhibit osteoclast
activity. Osteoprotegerin is secreted by osteoblasts and is able to
bind RANK-L, inhibiting osteoclast stimulation.
Osteoblasts can also be stimulated to increase bone mass through increased secretion of osteoid and by inhibiting the ability of osteoclasts to break down osseous tissue. Increased secretion of osteoid is stimulated by the secretion of growth hormone by the pituitary, thyroid hormone and the sex hormones (estrogens and androgens). These hormones also promote increased secretion of osteoprotegerin. Osteoblasts can also be induced to secrete a number of cytokines that promote reabsorbtion of bone by stimulating osteoclast activity and differentiation from progenitor cells. Vitamin D, parathyroid hormone and stimulation from osteocytes induce osteoblasts to increase secretion of RANK-ligand and interleukin 6, which cytokines then stimulate increased reabsorption of bone by osteoclasts. These same compounds also increase secretion of macrophage colony-stimulating factor
by osteoblasts, which promotes the differentiation of progenitor cells
into osteoclasts, and decrease secretion of osteoprotegerin.
Bone volume
Bone
volume is determined by the rates of bone formation and bone
resorption. Recent research has suggested that certain growth factors
may work to locally alter bone formation by increasing osteoblast
activity. Numerous bone-derived growth factors have been isolated and
classified via bone cultures. These factors include insulin-like growth
factors I and II, transforming growth factor-beta, fibroblast growth
factor, platelet-derived growth factor, and bone morphogenetic proteins.
Evidence suggests that bone cells produce growth factors for
extracellular storage in the bone matrix. The release of these growth
factors from the bone matrix could cause the proliferation of osteoblast
precursors. Essentially, bone growth factors may act as potential
determinants of local bone formation.
Research has suggested that cancellous bone volume in postemenopausal
osteoporosis may be determined by the relationship between the total
bone forming surface and the percent of surface resorption.
Clinical significance
A number of diseases can affect bone, including arthritis, fractures,
infections, osteoporosis and tumours. Conditions relating to bone can
be managed by a variety of doctors, including rheumatologists for joints, and orthopedic surgeons, who may conduct surgery to fix broken bones. Other doctors, such as rehabilitation specialists may be involved in recovery, radiologists in interpreting the findings on imaging, and pathologists in investigating the cause of the disease, and family doctors may play a role in preventing complications of bone disease such as osteoporosis.
When a doctor sees a patient, a history and exam will be taken. Bones are then often imaged, called radiography. This might include ultrasound X-ray, CT scan, MRI scan and other imaging such as a Bone scan, which may be used to investigate cancer. Other tests such as a blood test for autoimmune markers may be taken, or a synovial fluid aspirate may be taken.
Fractures
Radiography used to identify possible bone fractures after a knee injury.
In normal bone, fractures
occur when there is significant force applied, or repetitive trauma
over a long time. Fractures can also occur when a bone is weakened, such
as with osteoporosis, or when there is a structural problem, such as
when the bone remodels excessively (such as Paget's disease) or is the site of the growth of cancer. Common fractures include wrist fractures and hip fractures, associated with osteoporosis, vertebral fractures associated with high-energy trauma and cancer, and fractures of long-bones. Not all fractures are painful. When serious, depending on the fractures type and location, complications may include flail chest, compartment syndromes or fat embolism.
Compound fractures involve the bone's penetration through the skin. Some complex fractures can be treated by the use of bone grafting procedures that replace missing bone portions.
Fractures and their underlying causes can be investigated by X-rays, CT scans and MRIs.
Fractures are described by their location and shape, and several
classification systems exist, depending on the location of the fracture.
A common long bone fracture in children is a Salter–Harris fracture. When fractures are managed, pain relief is often given, and the fractured area is often immobilised. This is to promote bone healing. In addition, surgical measures such as internal fixation may be used. Because of the immobilisation, people with fractures are often advised to undergo rehabilitation.
Tumours
There are several types of tumour that can affect bone; examples of benign bone tumours include osteoma, osteoid osteoma, osteochondroma, osteoblastoma, enchondroma, giant cell tumour of bone, and aneurysmal bone cyst.
Cancer
Cancer can arise in bone tissue, and bones are also a common site for other cancers to spread (metastasise) to. Cancers that arise in bone are called "primary" cancers, although such cancers are rare. Metastases within bone are "secondary" cancers, with the most common being breast cancer, lung cancer, prostate cancer, thyroid cancer, and kidney cancer. Secondary cancers that affect bone can either destroy bone (called a "lytic" cancer) or create bone (a "sclerotic" cancer). Cancers of the bone marrow inside the bone can also affect bone tissue, examples including leukemia and multiple myeloma. Bone may also be affected by cancers in other parts of the body. Cancers in other parts of the body may release parathyroid hormone or parathyroid hormone-related peptide. This increases bone reabsorption, and can lead to bone fractures.
Bone tissue that is destroyed or altered as a result of cancers
is distorted, weakened, and more prone to fracture. This may lead to
compression of the spinal cord, destruction of the marrow resulting in bruising, bleeding and immunosuppression,
and is one cause of bone pain. If the cancer is metastatic, then there
might be other symptoms depending on the site of the original cancer.
Some bone cancers can also be felt.
Cancers of the bone are managed according to their type, their stage, prognosis, and what symptoms they cause. Many primary cancers of bone are treated with radiotherapy. Cancers of bone marrow may be treated with chemotherapy, and other forms of targeted therapy such as immunotherapy may be used. Palliative care, which focuses on maximising a person's quality of life, may play a role in management, particularly if the likelihood of survival within five years is poor.
Painful conditions
- Osteomyelitis is inflammation of the bone or bone marrow due to bacterial infection.
- Osteomalacia is a painful softening of adult bone caused by severe vitamin D deficiency.
- Osteogenesis imperfecta
- Osteochondritis dissecans
- Ankylosing spondylitis
- Skeletal fluorosis is a bone disease caused by an excessive accumulation of fluoride in the bones. In advanced cases, skeletal fluorosis damages bones and joints and is painful.
Osteoporosis
Reduced bone mineral density in Osteoporosis (R), increasing the likelihood of fractures.
Osteoporosis is a disease of bone where there is reduced bone mineral density, increasing the likelihood of fractures. Osteoporosis is defined in women by the World Health Organization as a bone mineral density of 2.5 standard deviations below peak bone mass, relative to the age and sex-matched average. This density is measured using dual energy X-ray absorptiometry (DEXA), with the term "established osteoporosis" including the presence of a fragility fracture. Osteoporosis is most common in women after menopause,
when it is called "postmenopausal osteoporosis", but may develop in men
and premenopausal women in the presence of particular hormonal
disorders and other chronic diseases or as a result of smoking and medications, specifically glucocorticoids. Osteoporosis usually has no symptoms until a fracture occurs.
For this reason, DEXA scans are often done in people with one or more
risk factors, who have developed osteoporosis and are at risk of
fracture.
Osteoporosis treatment includes advice to stop smoking, decrease
alcohol consumption, exercise regularly, and have a healthy diet. Calcium and trace mineral supplements may also be advised, as may Vitamin D. When medication is used, it may include bisphosphonates, Strontium ranelate, and hormone replacement therapy.
Osteopathic medicine
Osteopathic medicine
is a school of medical thought originally developed based on the idea
of the link between the musculoskeletal system and overall health, but
now very similar to mainstream medicine. As of 2012, over 77,000 physicians in the United States are trained in osteopathic medical schools.
Osteology
Human femurs and humerus from Roman period, with evidence of healed fractures
The study of bones and teeth is referred to as osteology. It is frequently used in anthropology, archeology and forensic science
for a variety of tasks. This can include determining the nutritional,
health, age or injury status of the individual the bones were taken
from. Preparing fleshed bones for these types of studies can involve the
process of maceration.
Typically anthropologists and archeologists study bone tools made by Homo sapiens and Homo neanderthalensis.
Bones can serve a number of uses such as projectile points or artistic
pigments, and can also be made from external bones such as antlers.
Other animals
Skeletal fluorosis in a cow's leg, due to industrial contamination
Leg and pelvic girdle bones of bird
Bird skeletons are very lightweight. Their bones are smaller and thinner, to aid flight. Among mammals, bats
come closest to birds in terms of bone density, suggesting that small
dense bones are a flight adaptation. Many bird bones have little marrow
due to their being hollow.
A bird's beak is primarily made of bone as projections of the mandibles which are covered in keratin.
A deer's antlers are composed of bone which is an unusual example of bone being outside the skin of the animal once the velvet is shed.
The extinct predatory fish Dunkleosteus had sharp edges of hard exposed bone along its jaws.
Many animals possess an exoskeleton that is not made of bone. These include insects and crustaceans.
The proportion of cortical bone that is 80% in the human skeleton may be much lower in other animals, especially in marine mammals and marine turtles, or in various Mesozoic marine reptiles, such as ichthyosaurs, among others.
Many animals, particularly herbivores, practice osteophagy – the eating of bones. This is presumably carried out in order to replenish lacking phosphate.
Many bone diseases that affect humans also affect other vertebrates – an example of one disorder is skeletal flurosis.
Society and culture
Bones from slaughtered animals have a number of uses. In prehistoric times, they have been used for making bone tools. They have further been used in bone carving, already important in prehistoric art, and also in modern time as crafting materials for buttons, beads, handles, bobbins, calculation aids, head nuts, dice, poker chips, pick-up sticks, ornaments, etc. A special genre is scrimshaw.
Bone glue
can be made by prolonged boiling of ground or cracked bones, followed
by filtering and evaporation to thicken the resulting fluid.
Historically once important, bone glue and other animal glues today have
only a few specialized uses, such as in antiques restoration. Essentially the same process, with further refinement, thickening and drying, is used to make gelatin.
Broth is made by simmering several ingredients for a long time, traditionally including bones.
Ground bones are used as an organic phosphorus-nitrogen fertilizer and as additive in animal feed. Bones, in particular after calcination to bone ash, are used as source of calcium phosphate for the production of bone china and previously also phosphorus chemicals.
Bone char, a porous, black, granular material primarily used for filtration and also as a black pigment, is produced by charring mammal bones.
To point the bone at someone is considered bad luck in some cultures, such as Australian aborigines, such as by the Kurdaitcha.
The wishbones of fowl have been used for divination,
and are still customarily used in a tradition to determine which one of
two people pulling on either prong of the bone may make a wish.
Various cultures throughout history have adopted the custom of shaping an infant's head by the practice of artificial cranial deformation. A widely practised
custom in China was that of foot binding to limit the normal growth of the foot.
