Search This Blog

Thursday, November 29, 2018

Spermatogenesis

From Wikipedia, the free encyclopedia

Spermatogenesis
Seminiferous tubule and sperm.jpg
Seminiferous tubule with maturing sperm. H&E stain.
Simplified spermatozoon diagram.svg
A mature human Spermatozoon

Spermatogenesis is the process by which haploid spermatozoa develop from germ cells in the seminiferous tubules of the testis. This process starts with the mitotic division of the stem cells located close to the basement membrane of the tubules. These cells are called spermatogonial stem cells. The mitotic division of these produces two types of cells. Type A cells replenish the stem cells, and type B cells differentiate into spermatocytes. The primary spermatocyte divides meiotically (Meiosis I) into two secondary spermatocytes; each secondary spermatocyte divides into two equal haploid spermatids by Meiosis II.The spermatids are transformed into spermatozoa(sperm) by the process called Spermiogenesis.These develop into mature spermatozoa, also known as sperm cells. Thus, the primary spermatocyte gives rise to two cells, the secondary spermatocytes, and the two secondary spermatocytes by their subdivision produce four spermatozoa.

Spermatozoa are the mature male gametes in many sexually reproducing organisms. Thus, spermatogenesis is the male version of gametogenesis, of which the female equivalent is oogenesis. In mammals it occurs in the seminiferous tubules of the male testes in a stepwise fashion. Spermatogenesis is highly dependent upon optimal conditions for the process to occur correctly, and is essential for sexual reproduction. DNA methylation and histone modification have been implicated in the regulation of this process. It starts at puberty and usually continues uninterrupted until death, although a slight decrease can be discerned in the quantity of produced sperm with increase in age.

Purpose

Spermatogenesis produces mature male gametes, commonly called sperm but more specifically known as spermatozoa, which are able to fertilize the counterpart female gamete, the oocyte, during conception to produce a single-celled individual known as a zygote. This is the cornerstone of sexual reproduction and involves the two gametes both contributing half the normal set of chromosomes (haploid) to result in a chromosomally normal (diploid) zygote.

To preserve the number of chromosomes in the offspring – which differs between species – one of each gamete must have half the usual number of chromosomes present in other body cells. Otherwise, the offspring will have twice the normal number of chromosomes, and serious abnormalities may result. In humans, chromosomal abnormalities arising from incorrect spermatogenesis results in congenital defects and abnormal birth defects (Down syndrome, Klinefelter syndrome) and in most cases, spontaneous abortion of the developing foetus.

Location in humans

Spermatogenesis takes place within several structures of the male reproductive system. The initial stages occur within the testes and progress to the epididymis where the developing gametes mature and are stored until ejaculation. The seminiferous tubules of the testes are the starting point for the process, where spermatogonial stem cells adjacent to the inner tubule wall divide in a centripetal direction—beginning at the walls and proceeding into the innermost part, or lumen—to produce immature sperm. Maturation occurs in the epididymis. The location [Testes/Scrotum] is specifically important as the process of spermatogenesis requires a lower temperature to produce viable sperm, specifically 1°-8 °C lower than normal body temperature of 37 °C (98.6 °F). Clinically, small fluctuations in temperature such as from an athletic support strap, causes no impairment in sperm viability or count.

Duration

For humans, the entire process of spermatogenesis is variously estimated as taking 74 days (according to tritium-labelled biopsies) and approximately 120 days (according to DNA clock measurements). Including the transport on ductal system, it takes 3 months. Testes produce 200 to 300 million spermatozoa daily. However, only about half or 100 million of these become viable sperm.

Stages

The entire process of spermatogenesis can be broken up into several distinct stages, each corresponding to a particular type of cell in humans. In the following table, ploidy, copy number and chromosome/chromatid counts are for one cell, generally prior to DNA synthesis and division (in G1 if applicable). The primary spermatocyte is arrested after DNA synthesis and prior to division.

Cell typeploidy/chromosomes in humanDNA copy number/chromatids in humanProcess entered by cell
spermatogonium (types Ad, Ap and B) diploid (2N) / 46 2C / 46 spermatocytogenesis (mitosis)
primary spermatocyte diploid (2N) / 46 4C / 2x46 spermatidogenesis (meiosis I)
two secondary spermatocytes haploid (N) / 23 2C / 2x23 spermatidogenesis (meiosis II)
four spermatids haploid (N) / 23 C / 23 spermiogenesis
four functional spermatozoids haploid (N) / 23 C / 23 spermiation

Spermatocytogenesis

The process of spermatogenesis as the cells progress from primary spermatocytes, to secondary spermatocytes, to spermatids, to mature sperm.
 
Full diagram of human spermatogenesis

Spermatocytogenesis is the male form of gametocytogenesis and results in the formation of spermatocytes possessing half the normal complement of genetic material. In spermatocytogenesis, a diploid spermatogonium, which resides in the basal compartment of the seminiferous tubules, divides mitotically, producing two diploid intermediate cells called primary spermatocytes. Each primary spermatocyte then moves into the adluminal compartment of the seminiferous tubules and duplicates its DNA and subsequently undergoes meiosis I to produce two haploid secondary spermatocytes, which will later divide once more into haploid spermatids. This division implicates sources of genetic variation, such as random inclusion of either parental chromosomes, and chromosomal crossover, to increase the genetic variability of the gamete.

Each cell division from a spermatogonium to a spermatid is incomplete; the cells remain connected to one another by bridges of cytoplasm to allow synchronous development. It should also be noted that not all spermatogonia divide to produce spermatocytes; otherwise, the supply of spermatogonia would run out. Instead, spermatogonial stem cells divide mitotically to produce copies of themselves, ensuring a constant supply of spermatogonia to fuel spermatogenesis.

Spermatidogenesis

Spermatidogenesis is the creation of spermatids from secondary spermatocytes. Secondary spermatocytes produced earlier rapidly enter meiosis II and divide to produce haploid spermatids. The brevity of this stage means that secondary spermatocytes are rarely seen in histological studies.

Spermiogenesis

During spermiogenesis, the spermatids begin to form a tail by growing microtubules on one of the centrioles, which turns into basal body. These microtubules form an axoneme. Later the centriole is modified in the process of centrosome reduction. The anterior part of the tail (called midpiece) thickens because mitochondria are arranged around the axoneme to ensure energy supply. Spermatid DNA also undergoes packaging, becoming highly condensed. The DNA is packaged firstly with specific nuclear basic proteins, which are subsequently replaced with protamines during spermatid elongation. The resultant tightly packed chromatin is transcriptionally inactive. The Golgi apparatus surrounds the now condensed nucleus, becoming the acrosome.
Maturation then takes place under the influence of testosterone, which removes the remaining unnecessary cytoplasm and organelles. The excess cytoplasm, known as residual bodies, is phagocytosed by surrounding Sertoli cells in the testes. The resulting spermatozoa are now mature but lack motility, rendering them sterile. The mature spermatozoa are released from the protective Sertoli cells into the lumen of the seminiferous tubule in a process called spermiation.

The non-motile spermatozoa are transported to the epididymis in testicular fluid secreted by the Sertoli cells with the aid of peristaltic contraction. While in the epididymis the spermatozoa gain motility and become capable of fertilization. However, transport of the mature spermatozoa through the remainder of the male reproductive system is achieved via muscle contraction rather than the spermatozoon's recently acquired motility.

Role of Sertoli cells

Labelled diagram of the organisation of Sertoli cells (red) and spermatocytes (blue) in the testis. Spermatids which have not yet undergone spermiation are attached to the lumenal apex of the cell

At all stages of differentiation, the spermatogenic cells are in close contact with Sertoli cells which are thought to provide structural and metabolic support to the developing sperm cells. A single Sertoli cell extends from the basement membrane to the lumen of the seminiferous tubule, although the cytoplasmic processes are difficult to distinguish at the light microscopic level.

Sertoli cells serve a number of functions during spermatogenesis, they support the developing gametes in the following ways:
  • Maintain the environment necessary for development and maturation, via the blood-testis barrier;
  • Secrete substances initiating meiosis;
  • Secrete supporting testicular fluid;
  • Secrete androgen-binding protein (ABP), which concentrates testosterone in close proximity to the developing gametes:
    • Testosterone is needed in very high quantities for maintenance of the reproductive tract, and ABP allows a much higher level of fertility;
  • Secrete hormones affecting pituitary gland control of spermatogenesis, particularly the polypeptide hormone, inhibin;
  • Phagocytose residual cytoplasm left over from spermiogenesis;
  • Secretion of anti-Müllerian hormone causes deterioration of the Müllerian duct;
  • Protect spermatids from the immune system of the male, via the blood-testis barrier;
  • Contribute to the spermatogonial stem cell niche.
The intercellular adhesion molecules ICAM-1 and soluble ICAM-1 have antagonistic effects on the tight junctions forming the blood-testis barrier. ICAM-2 molecules regulate spermatid adhesion on the apical side of the barrier (towards the lumen).

Influencing factors

The process of spermatogenesis is highly sensitive to fluctuations in the environment, particularly hormones and temperature. Testosterone is required in large local concentrations to maintain the process, which is achieved via the binding of testosterone by androgen binding protein present in the seminiferous tubules. Testosterone is produced by interstitial cells, also known as Leydig cells, which reside adjacent to the seminiferous tubules.

Seminiferous epithelium is sensitive to elevated temperature in humans and some other species, and will be adversely affected by temperatures as high as normal body temperature. Consequently, the testes are located outside the body in a sack of skin called the scrotum. The optimal temperature is maintained at 2 °C (man)–8 °C (mouse) below body temperature. This is achieved by regulation of blood flow and positioning towards and away from the heat of the body by the cremasteric muscle and the dartos smooth muscle in the scrotum.

Dietary deficiencies (such as vitamins B, E and A), anabolic steroids, metals (cadmium and lead), x-ray exposure, dioxin, alcohol, and infectious diseases will also adversely affect the rate of spermatogenesis. In addition, the male germ line is susceptible to DNA damage caused by oxidative stress, and this damage likely has a significant impact on fertilization and pregnancy. Exposure to pesticides also affects spermatogenesis.

Hormonal control

Hormonal control of spermatogenesis varies among species. In humans the mechanism is not completely understood; however it is known that initiation of spermatogenesis occurs at puberty due to the interaction of the hypothalamus, pituitary gland and Leydig cells. If the pituitary gland is removed, spermatogenesis can still be initiated by follicle stimulating hormone (FSH) and testosterone. In contrast to FSH, LH appears to have little role in spermatogenesis outside of inducing gonadal testosterone production.

FSH stimulates both the production of androgen binding protein (ABP) by Sertoli cells, and the formation of the blood-testis barrier. ABP is essential to concentrating testosterone in levels high enough to initiate and maintain spermatogenesis. Intratesticular testosterone levels are 20–100 or 50–200 times higher than the concentration found in blood, although there is variation over a 5- to 10-fold range amongst healthy men. FSH may initiate the sequestering of testosterone in the testes, but once developed only testosterone is required to maintain spermatogenesis. However, increasing the levels of FSH will increase the production of spermatozoa by preventing the apoptosis of type A spermatogonia. The hormone inhibin acts to decrease the levels of FSH. Studies from rodent models suggest that gonadotropins (both LH and FSH) support the process of spermatogenesis by suppressing the proapoptotic signals and therefore promote spermatogenic cell survival.

The Sertoli cells themselves mediate parts of spermatogenesis through hormone production. They are capable of producing the hormones estradiol and inhibin. The Leydig cells are also capable of producing estradiol in addition to their main product testosterone. Estrogen has been found to be essential for spermatogenesis in animals. However, a man with estrogen insensitivity syndrome (a defective ERα) was found produce sperm with a normal sperm count, albeit abnormally low sperm viability; whether he was sterile or not is unclear. Levels of estrogen that are too high can be detrimental to spermatogenesis due to suppression of gonadotropin secretion and by extension intratesticular testosterone production. Prolactin also appears to be important for spermatogenesis.

Cryoconservation of animal genetic resources

From Wikipedia, the free encyclopedia

Cryoconservation of animal genetic resources at the USDA Gene Bank

Cryoconservation of animal genetic resources is a strategy wherein samples of animal genetic materials are preserved cryogenically.

Animal genetic resources, as defined by the Food and Agriculture Organization of the United Nations, are "those animal species that are used, or may be used, for the production of food and agriculture, and the populations within each of them. These populations within each species can be classified as wild and feral populations, landraces and primary populations, standardised breeds, selected lines, varieties, strains and any conserved genetic material; all of which are currently categorized as Breeds." Genetic materials that are typically cryogenically preserved include sperm, oocytes, embryos and somatic cells. Cryogenic facilities are called gene banks and can vary greatly in size usually according to the economic resources available. They must be able to facilitate germplasm collection, processing, freezing, and long term storage, all in a hygienic and organized manner. Gene banks must maintain a precise database and make information and genetic resources accessible to properly facilitate cryoconservation. Cryoconservation is an ex situ conservation strategy that often coexists alongside in situ conservation to protect and preserve livestock genetics.

Cryoconservation of livestock genetic resources is primarily done in order to preserve the genetics of populations of interest, such as indigenous breeds, also known as local or minor breeds. Material may be stored because individuals shared specific genes and phenotypes that may be of value or have potential value for researchers or breeders. Therefore, one of the main goals remains preserving the gene pool of local breeds that may be threatened. Indigenous livestock genetics are commonly threatened by factors such as globalization, modernization, changes in production systems, inappropriate introduction of major breeds, genetic drift, inbreeding, crossbreeding, climate change, natural disasters, disease, cultural changes, and urbanization. Indigenous livestock are critical to sustainable agricultural development and food security, due to their: adaptation to environment and endemic diseases, indispensable part in local production systems, social and cultural significance, and importance to local rural economies. The genetic resources of minor breeds have value to the local farmers, consumers of the products, private companies and investors interested in crossbreeding, breed associations, governments, those conducting research and development, and non-governmental organizations. Therefore, efforts have been made by national governments and non-governmental organizations, such as the Livestock Conservancy, to encourage conservation of livestock genetics through cryoconservation, as well as through other ex situ and in situ strategies. Cryogenic specimens of livestock genetic resources can be preserved and used for extended periods of time. This advantage makes cryoconservation beneficial particularly for threatened breeds who have low breed populations. Cryogenically preserved specimens can be used to revive breeds that are endangered or extinct, for breed improvement, crossbreeding, research and development. However, cryoconservation can be an expensive strategy and requires long term hygienic and economic commitment for germplasms to remain viable. Cryoconservation can also face unique challenges based on the species, as some species have a reduced survival rate of frozen germplasm.

Description

Cryoconservation is the process of freezing cells and tissues using liquid nitrogen to achieve extreme low temperatures with the intent of using the preserved sample to prevent the loss of genetic diversity. Semen, embryos, oocytes, somatic cells, nuclear DNA, and other types of biomaterial such as blood and serum can be stored using cryopreservation, in order to preserve genetic materials. The primary benefit of cryoconservation is the ability to save germplasms for extended periods of time, therefore maintaining the genetic diversity of a species or breed. There are two common techniques of cryopreservation: slow freezing and vitrification. Slow freezing helps eliminate the risk of intracellular ice crystals. If ice crystals form in the cells, there can be damage or destruction of genetic material. Vitrification is the process of freezing without the formation of ice crystals.

Value

Cryoconservation is an indispensable tool in the storage of genetic material of animal origin and will continue to be useful for the conservation of livestock into the future. Cryoconservation serves as a way to preserve germplasms, which is particularly beneficial for threatened breeds. Indigenous livestock may be conserved for a variety of reasons, including the preservation of local genetics, their importance in local traditions and their value to the culture identity and heritage of the area. The loss of regional livestock diversity could increase instability, decreases future possibilities and challenge production systems. Moreover, the maintenance of indigenous breeds can aid in the preservation of traditional lifestyles and livelihoods, even providing income through cultural tourism. Indigenous breeds can contribute to local economies and production systems by utilising land that is unsuitable for crop production to produce food products, as well as providing hides, manure and draft power. Therefore, the conservation and progression of these breeds are of the utmost importance for food security and sustainability.

Another beneficial factor in cryoconservation of indigenous livestock is in terms of food security and economic development. Indigenous livestock often have beneficial traits related to adaptation to local climate and diseases that can be incorporated into major breeds through cryoconservation practices. Cryoconservation is a favorable strategy because it allows germplasms to be stored for extended periods of time in a small confined area. An additional benefit of cryoconservation is the ability to preserve the biological material of both maternal and paternal cells and maintain viability over extended periods of time. Cryoconservation has been successfully used as a conservation strategy for species and breeds that have since been endangered. One drawback is that cryoconservation can only be done if preparation has taken place in advance. With proper preparation of collecting and maintaining genetic material, this method is very beneficial for the conservation of rare and endangered livestock. Cryoconservation can serve as a contingency plan when a breed population needs to be restored or when a breed has become extinct, as well as for breed improvement. This process benefits companies and researchers by making genetic materials available.

Conservation Goals
Flexibility of country's AGR to meet changes Insurance against changes in production conditions Safeguarding against diseases, disasters, etc. Opportunities for genomic research
Genetic Factors Allowing continued breed evolution/genetic adaption Increasing knowledge of phenotypic characteristics of breed Minimizing exposed to genetic drafts
Sustainable utilization of total areas Opportunities for development in rural areas Maintenance of agro-ecosystem diversity Conservation of rural culture diversity

The support of numerous stakeholders make this process possible in the establishment and operations of cryoconservation. Before every phase is executed, all participating stakeholders must be briefed to understand the possible phase impending. This would include informing the stakeholders of their responsibilities and receiving their consent for the cryoconservation process. The possible stakeholders within the cryoconservation process could include:

Methods

Collection

There are several ways to collect the genetic materials based on which type of germplasm.

Semen

Freezing semen is a commonly used technique in the modern animal agriculture industry, which is well researched with established methods Semen is often collected using an artificial vagina, electroejaculation, gloved-hand technique, abdominal stroking, or epididymal sperm collection. Preferred collection techniques vary based on species and available tools. Patience and technique are keys to successful collection of semen. There are several styles and types of artificial vaginas that can be used depending on the breed and species of the male. During this process the penis enters a tube that is the approximate pressure and temperature of the female's vagina. There is a disposable bag inside the tube that collects the semen. During this process it may be beneficial to have a teaser animal—an animal used to sexually tease but not impregnate the animal—to increase the arousal of the male. Electroejaculation is a method of semen collection in the cattle industry because it yields high quality semen. However, this process requires the animal to be trained and securely held, thus it is not ideal when working with wild or feral animals. When performing this process the electroejaculator is inserted into the rectum of the male. The electroejaculator stimulates the male causing an ejaculation, after which the semen is collected. The glove hand collection technique is used mainly in the swine industry. During this process, the boar mounts a dummy, while the handler grasps the penis of the boar between the ridges of his fingers and collects the semen. Abdominal stroking is exclusively used in the poultry industry. During the technique, one technician will hold the bird, while a second technician massages the bird's cloaca. However, feces and semen both exit the male bird's body through the cloaca, so the semen quality is often low.

Embryo

Embryo collection is more demanding and requires more training than semen collection because the female reproductive organs are located inside of the body cavity. Superovulation is a technique used in order to have a female release more oocytes than normal. This can be achieved by using hormones to manipulate the female's reproductive organs. The hormones used are typically gonadotropin-like, meaning they stimulate the gonads. Follicle stimulating hormone is the preferred hormone in cattle, sheep and goats. While in pigs, equine chorionic gonadotropin is preferred. However, this is not commonly done in the swine industry because gilts and sows (female pigs) naturally ovulate more than one oocyte at one time. Superovulation can be difficult because not all females will respond the same way and success will vary by species. Once the female has released the oocytes, they are fertilized internally—in vivo—and flushed out of her body. In vivo fertilization is more successful than in vitro fertilization. In cattle, usually 10 or more embryos are removed from the flushing process. In order to flush the uterus, a technician will first seal off the female's cervix and add fluid, which allows the ovum to be flushed out of the uterine horns and into a cylinder for analysis. This process typically takes 30 minutes or less. Technicians are able to determine the sex of the embryo, which can be especially beneficial in the dairy industry because it is more desirable for the embryo to be a female. Vitrification is the preferred method of embryo freezing because it yields higher quality embryos. It is crucial technicians handle the embryos with care and freeze them within 3–4 hours in order to preserve viability of the greatest percentage of embryos.

Oocytes

Oocytes can be collected from most mammalian species. Conventional oocyte collection is when ovaries are removed from a donor animal; this is done posthumously in slaughter facilities. The ovaries are kept warm as they are brought back to a laboratory for oocyte collection. Keeping the ovaries warm helps increase the success rate of fertilization. Once collected the oocytes are assessed and categorized into small, medium, and large, and then matured for 20–23 hours. This simple, inexpensive technique can lead to about 24 oocytes collected from a bovine. Conventional oocyte collection is especially useful for females who unexpectedly die or who are incapable of being bred due to injury. A second option for oocyte collection is to utilize the transvaginal ultrasound guided oocyte collection method otherwise known as TUGA. Collection technique varies slightly by species, but the general methods for collection are the same; a needle is inserted into each ovarian follicle and pulled out via vacuum. The major benefit of using this method is the ability to expand the lifetime reproductive productivity, or the number of productive days an animal is in her estrous cycle. Pregnant cows and mares continue to develop new follicles until the middle of pregnancy. Thus, TUGA can be used to substantially increase the fitness of an individual because the female then has the potential produce more than one offspring per gestation.

Somatic cells

Somatic cells are an additional resource which can be retrieved for gene banking, particularly in the cases of emergency wherein gametes cannot be collected or stored. Tissues can be taken from living animals or shortly after death. These tissues can be saved via cryopreservation or dehydrated. Blood cells can also be useful for DNA analysis such as comparing homozygosity[36][37] It is recommended by the FAO that two vials of blood be drawn to reduce the chance that all samples will be lost from a particular animal. DNA can be extracted using commercial kits, making this an affordable and accessible strategy for collecting germplasms.

Semen Semen and Oocytes Embryos
Number of samples needed to restore a breed 2000 100 of each 200
Backcrossing needed? Yes No No
Mitochondrial genes included? No Yes Yes
Collection Possible in livestock species Mostly, not always Yes, in some species. Operational for bovines Yes, in some species. Operational for bovines
Cost of collection $$ $$ $$$$
Cryopreservation possible? Yes Still in experimental stage Operational in bovines, horses and sheep. Promising in pigs. Impossible in poultry
Utilization Surgical or non-surgical insemination backcrossing for 4 generations In vitro maturation/IVF followed by surgical or non-surgical ET Surgical or non-surgical ET
Current feasibility High Medium High depending on available resources

Freezing

There are two cryopreservation freezing methods: slow freezing and vitrification.

Example freezing laboratory

Slow freezing

During slow freezing, cells are placed in a medium which is cooled below the freezing point using liquid nitrogen. This causes an ice mass to form in the medium. As the water in the medium freezes, the concentration of the sugars, salts, and cryoprotectant increase. Due to osmosis, the water from the cells enters the medium to keep the concentrations of sugars, salts, and cryoprotectant equal. The water that leaves the cells is eventually frozen, causing more water to diffuse out of the cell. Eventually, the unfrozen portion—cellular—becomes too viscous for ice crystals to form inside of the cell.

Vitrification

The second technique for cryoconservation is vitrification or flash freezing. Vitrification is the transformation from a liquid to solid state without the formation of crystals. The process and mechanics of vitrification are similar to slow freezing, the difference lying in the concentration of the medium. The vitrification method applies a selected medium which has a higher concentration of solute so the water will leave the cells via osmosis. The medium is concentrated enough so all of the intracellular water will leave without the medium needing to be reconcentrated. The higher concentration of the medium in vitrification allows the germplasms to be frozen more rapidly than with slow freezing. Vitrification is considered to be the more effective technique of freezing germplasms.

Facility design and equipment

Facility design

Example of animal holding and collecting facility

When designing a facility, there are several things that should be kept in mind including biosecurity, worker safety and efficiency, and animal welfare. Diverse infrastructure is required in order to successfully collect and store genetic material. The buildings needed depend on the size of facilities as well as the extent of the operations.

Biosecurity

Biosecurity, a management measure used to prevent the transmission of diseases and disease agents on the facility, is important to keep in mind when designing a facility. In order to achieve a high level of biosecurity, collection facilities should be placed as far as possible from one another, as well as from farms. According to the FAO's recommendations, facilities should be "at least 3 km from farms or other biological risks and 1 km from main roads and railways". Separation between collection facilities and surrounding farms can improve biosecurity as pests, such as flies and mice, have the potential to travel from farm to facility and vice versa. Other disease agents may be able to travel through the air via wind, furthering the importance of separation of farms and proper air sanitation and ventilation. Additionally, a perimeter fence is used to prevent potential threats that could cause contamination to germplasms, such as unauthorized personnel or unwanted animals, from entering the facilities. Animals may be housed in pens located inside or outside of a barn as long as they are contained within the perimeter fence. When interaction with outside objects, such as feed trucks or veterinary personnel, is necessary, complete sanitation is required to decrease the risk of contamination. There is always the possibility of disease spreading among the animals whose biological data is being collected or from animal to human. An example of a disease that can easily spread through germplasm is Porcine Reproductive and Respiratory Syndrome, otherwise known as PRRS. A highly contagious disease between swine, PRRS causes millions of dollars to be lost annually by producers. The disease can be spread through boar semen. Therefore, biosecurity is particularly important when genetic material will be inserted into another animal to prevent the spread of such diseases.

Human considerations

Worker safety is always a priority when handling livestock. Escape routes and alternative access throughout the facility are crucial for both the handlers and livestock. Germplasm storage and collection sites must include locker rooms for staff, which provide lockers, showers, and storage of clothing and footwear, in order to meet sanitation requirements.

Animal considerations

Animal housing practical when collecting germplasms because they keep donor animals in an easily accessible area, making the process of collecting germplasms easier and more efficient. The species and breeds of animals housed should be considered while planning the facility; facilities should be big enough to meet animal welfare standards, yet small enough to reduce human contact and increase ease of handling while reducing stress of the animal. As the process of collecting germplasm may take several days, the animal may become stressed causing a lower quality of genetic material to be obtained. Thus, training the animal to become familiar with the process is key. Holding facilities for animals may also serve as a quarantine. Quarantine facilities are necessary in order to prevent the transmission of disease from animal to animal, animal to germplasm, germplasm to germplasm, and germplasm to animal. Introducing quarantine to separate the diseased animal(s) from the healthy should be done immediately. However, a quarantine does not always prevent the spread of disease.

Temperature control and ventilation

Temperature control and ventilation should be included in the design of the holding and collection facilities to keep the animals comfortable and healthy, while limiting stress during the germplasm collection process. Ventilation serves as an effective way to keep clean airflow throughout the facilities and eliminate odors Temperature control helps regulate the air quality and humidity level inside the barn.

Equipment

A freezing and processing laboratory for genetic materials can be on the same site as the holding and collecting facility. However, the laboratory must have higher sanitation standards. According to the FAO, a proper germplasm laboratory should include the following:
 
Cryopreservation requires equipment to collect biological material and test tubes for storage. Price is highly variable based on the quality of the collection and storage materials. The life expectancy of tools should be considered when determining costs. In addition to traditional laboratory equipment, the FAO also suggests the following:

Cryoconservation is limited by the cells and tissues that can be frozen and successfully thawed. Cells and tissues that can be successfully frozen are limited by their surface area. To keep cells and tissues viable, they must be frozen quickly to prevent ice crystal formation. Thus, a large surface area is beneficial. Another limitation is the species being preserved. There have been difficulties using particular methods of cryoconservation with certain species. For example, artificial insemination is more difficult in sheep than cattle, goats, pigs, or horses due to posterior folds in the cervix of ovines. Cryopreservation of embryos is dependent on the species and the stage of development of the embryo. Pig embryos are the most difficult to freeze, thaw, and utilize produce live offspring due to their sensitivity to chilling and high lipid content.

Legal issues

The collection and utilization of genetic materials requires clear agreements between stakeholders with regards to their rights and responsibilities. The FAO and others, such as Mendelsohn, suggests that governments establish policies with regards to livestock genetic resources and their collection, storage, distribution, and utilization are governments. The FAO also recommends that national or regional livestock industries establish an advisory committee to advise and provide recommendations on policy. Livestock are traditionally a private good; in order to obtain ownership of genetic materials, gene banks have several strategies that they can deploy. Gene banks may either:

Hungarian Grey cattle

An example of the use of cryoconservation to prevent the extinction of a livestock breed is the case of the Hungarian Grey cattle, or Magya Szurke. Hungarian Grey cattle were once a dominant breed in southeastern Europe with a population of 4.9 million head in 1884. They were mainly used for draft power and meat. However, the population had decreased to 280,000 head by the end of World War II and eventually reached the low population of 187 females and 6 males from 1965 to 1970. The breed's decreased use was due primarily to the mechanization of agriculture and the adoption of major breeds, which yield higher milk production. The Hungarian government launched a project to preserve the breed, as it possesses valuable traits, such as stamina, calving ease, disease resistance, and easy adaptation to a variety of climates. The government program included various conservation strategies, including the cryopreservation of semen and embryos. The Hungarian government's conservation effort brought the population up to 10,310 in 2012, which shows significant improvement using cryoconservation.

The Gaur

Gaur, also known as the Indian bison, is the heaviest and most powerful of all wild cattle native to South and Southeast Asia. It is indicated in field data that the population of mature animals is about 5,200–18,000. Male and female Gaur both have distinctive humps between the head and shoulders, a dorsal ridge, prominent horns, and a dewlap which extends to the front legs.The Gaur grows 60% faster than domestic cattle, meaning farmers meat can be harvested at a faster rate, making beef production two to three times more profitable. Gaur meat is preferred over other breeds' meat among local people. Another benefit of the bovine is that it has the ability to sweat and tolerates heat well.

The Gaur population experienced a drastic decline of about 90% between the 1960s and 1990s due to poaching, commercial hunting, shrinking habitat, and the spreading of disease. According to the International Union for Conservation of Nature's Red List, the Gaur is a vulnerable species due to its declining population in Southeast Asia. Although the global Gaur population has declined by 30% over the past 30 years, the Gaur has a relatively stable population in India, due to protective efforts such as cryoconservation. The American Association of Zoos and Aquariums, Integrated Conservation Research (ICR), and Advanced Cell Technology have made efforts to use cryopreserved specimens of the Gaur through artificial insemination, embryo transfer, and cloning, respectively. Hybridization with domestic cattle has been successfully achieved by ICR, in order to create higher yielding, heat resistant cattle.

Oocyte

From Wikipedia, the free encyclopedia

An oocyte (UK: /ˈəst/, US: /ˈ-/), oöcyte, ovocyte, or rarely ocyte, is a female gametocyte or germ cell involved in reproduction. In other words, it is an immature ovum, or egg cell. An oocyte is produced in the ovary during female gametogenesis. The female germ cells produce a primordial germ cell (PGC), which then undergoes mitosis, forming oogonia. During oogenesis, the oogonia become primary oocytes. An oocyte is a form of genetic material that can be collected for cryoconservation. Cryoconservation of animal genetic resources have been put into action as a means of conserving traditional livestock.

Formation

Diagram showing the reduction in number of the chromosomes in the process of maturation of the ovum; the process is known as meiosis.

The formation of an oocyte is called oocytogenesis, which is a part of oogenesis. Oogenesis results in the formation of both primary oocytes during fetal period, and of secondary oocytes after it as part of ovulation.

Cell type ploidy/chromosomes chromatids Process Time of completion
Oogonium diploid/46(2N) 2C Oocytogenesis (mitosis) third trimester
primary Oocyte diploid/46(2N) 4C Ootidogenesis (meiosis I) (Folliculogenesis) Dictyate in prophase I for up to 50 years
secondary Oocyte haploid/23(1N) 2C Ootidogenesis (meiosis II) Halted in metaphase II until fertilization
Ootid haploid/23(1N) 1C Ootidogenesis (meiosis II) Minutes after fertilization
Ovum haploid/23(1N) 1C

Characteristics

Cytoplasm

Oocytes are rich in cytoplasm, which contains yolk granules to nourish the cell early in development.

Nucleus

During the primary oocyte stage of oogenesis, the nucleus is called a germinal vesicle.

The only normal human type of secondary oocyte has the 23rd (sex) chromosome as 23,X (female-determining), whereas sperm can have 23,X (female-determining) or 23,Y (male-determining).

Nest

The space within an ovum or immature ovum is located is the cell-nest.

Maternal contributions

diagram of an oocyte with its vegetal and animal hemispheres identified
Oocyte poles

Because the fate of an oocyte is to become fertilized and ultimately grow into a fully functioning organism, it must be ready to regulate multiple cellular and developmental processes. The oocyte, a large and complex cell, must be supplied with numerous molecules that will direct the growth of the embryo and control cellular activities. As the oocyte is a product of female gametogenesis, the maternal contribution to the oocyte and consequently the newly fertilized egg is enormous. There are many types of molecules that are maternally supplied to the oocyte, which will direct various activities within the growing zygote.

Avoidance of damage to germ-line DNA

The DNA of a cell is vulnerable to the damaging effect of oxidative free radicals produced as byproducts of cellular metabolism. DNA damage occurring in oocytes, if not repaired, can be lethal and result in reduced fecundity and loss of potential progeny. Oocytes are substantially larger than the average somatic cell, and thus considerable metabolic activity is necessary for their provisioning. If this metabolic activity were carried out by the oocyte’s own metabolic machinery, the oocyte genome would be exposed to the reactive oxidative by-products generated. Thus it appears that a process evolved to avoid this vulnerability of germ line DNA. It was proposed that, in order to avoid damage to the DNA genome of the oocytes, the metabolism contributing to the synthesis of much of the oocyte’s constituents was shifted to other maternal cells that then transferred these constituents to oocytes. Thus, oocytes of many organisms are protected from oxidative DNA damage while storing up a large mass of substances to nurture the zygote in its initial embryonic growth.

mRNAs and proteins

During the growth of the oocyte, a variety of maternally transcribed messenger RNAs, or mRNAs, are supplied by maternal cells. These mRNAs can be stored in mRNP (message ribonucleoprotein) complexes and be translated at specific time points, they can be localized within a specific region of the cytoplasm, or they can be homogeneously dispersed within the cytoplasm of the entire oocyte. Maternally loaded proteins can also be localized or ubiquitous throughout the cytoplasm. The translated products of the mRNAs and the loaded proteins have multiple functions; from regulation of cellular "house-keeping" such as cell cycle progression and cellular metabolism, to regulation of developmental processes such as fertilization, activation of zygotic transcription, and formation of body axes. Below are some examples of maternally inherited mRNAs and proteins found in the oocytes of the African clawed frog.

Name Type of maternal molecule Localization Function
VegT mRNA Vegetal hemisphere Transcription factor
Vg1 mRNA Vegetal hemisphere Transcription factor
XXBP-1 mRNA Not known Transcription factor
CREB Protein Ubiquitous Transcription factor
FoxH1 mRNA Ubiquitous Transcription factor
p53 Protein Ubiquitous Transcription Factor
Lef/Tcf mRNA Ubiquitous Transcription factor
FGF2 Protein Nucleus Not known
FGF2, 4, 9 FGFR1 mRNA Not known FGF signaling
Ectodermin Protein Animal hemisphere Ubiquitin ligase
PACE4 mRNA Vegetal hemisphere Proprotein convertase
Coco Protein Not known BMP inhibitor
Twisted gastrulation Protein Not known BMP/Chordin binding protein
fatvg mRNA Vegetal hemisphere Germ cell formation and cortical rotation

a diagram of the Xenopus laevis oocyte and its maternal determinants
Maternal determinants in Xenopus laevis oocyte

Mitochondria

The oocyte receives mitochondria from maternal cells, which will go on to control embryonic metabolism and apoptotic events. The partitioning of mitochondria is carried out by a system of microtubules that will localize mitochondria throughout the oocyte. In certain organisms, such as mammals, paternal mitochondria brought to the oocyte by the spermatozoon are degraded through the attachment of ubiquitinated proteins. The destruction of paternal mitochondria ensures the strictly maternal inheritance of mitochondria and mitochondrial DNA or mtDNA.

Nucleolus

In mammals, the nucleolus of the oocyte is derived solely from maternal cells. The nucleolus, a structure found within the nucleus, is the location where rRNA is transcribed and assembled into ribosomes. While the nucleolus is dense and inactive in a mature oocyte, it is required for proper development of the embryo.

Ribosomes

Maternal cells also synthesize and contribute a store of ribosomes that are required for the translation of proteins before the zygotic genome is activated. In mammalian oocytes, maternally derived ribosomes and some mRNAs are stored in a structure called cytoplasmic lattices. These cytoplasmic lattices, a network of fibrils, protein, and RNAs, have been observed to increase in density as the number of ribosomes decrease within a growing oocyte.

Paternal contributions

The spermatozoon that fertilizes an oocyte will contribute its pronucleus, the other half of the zygotic genome. In some species, the spermatozoon will also contribute a centriole, which will help make up the zygotic centrosome required for the first division. However, in some species, such as in the mouse, the entire centrosome is acquired maternally. Currently under investigation is the possibility of other cytoplasmic contributions made to the embryo by the spermatozoon.

During fertilization, the sperm provides three essential parts to the oocyte: (1) a signalling or activating factor, which causes the metabolically dormant oocyte to activate; (2) the haploid paternal genome; (3) the centrosome, which is responsible for maintaining the microtubule system.

Abnormalities

Operator (computer programming)

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Operator_(computer_programmin...