Search This Blog

Tuesday, November 25, 2014

Colony collapse disorder

From Wikipedia, the free encyclopedia

Honey bees at a hive entrance: One is about to land and the other is fanning.

Colony collapse disorder (CCD) is a phenomenon in which worker bees from a European honey bee colony abruptly disappear. While such disappearances have occurred throughout the history of apiculture, and were known by various names (disappearing disease, spring dwindle, May disease, autumn collapse, and fall dwindle disease),[1] the syndrome was renamed colony collapse disorder in late 2006[2] in conjunction with a drastic rise in the number of disappearances of western honeybee colonies in North America.[3] European beekeepers observed similar phenomena in Belgium, France, the Netherlands, Greece, Italy, Portugal, and Spain,[4] and initial reports have also come in from Switzerland and Germany, albeit to a lesser degree[5] while the Northern Ireland Assembly received reports of a decline greater than 50%.[6]

Colony collapse disorder is significant economically because many agricultural crops worldwide are pollinated by European honey bees. According to the Agriculture and Consumer Protection Department of the Food and Agriculture Organization of the United Nations, the worth of global crops with honeybee’s pollination was estimated to be close to $200 billion in 2005.[7] Shortages of bees in the US have increased the cost to farmers renting them for pollination services by up to 20%.[8]

The mechanisms of CCD and the reasons for its increasing prevalence remain unclear, but many possible causes have been proposed: pesticides, primarily neonicotinoids; infections with Varroa and Acarapis mites; malnutrition; various pathogens; genetic factors; immunodeficiencies; loss of habitat; changing beekeeping practices; or a combination of factors.[9]

History

Limited occurrences resembling CCD have been documented as early as 1869[10][11] and this set of symptoms has, in the past several decades, been given many different names (disappearing disease, spring dwindle, May disease, autumn collapse, and fall dwindle disease).[1] Most recently, a similar phenomenon in the winter of 2004/2005 occurred, and was attributed to varroa mites (the "vampire mite" scare), though this was never ultimately confirmed. The cause of the appearance of this syndrome has never been determined. Upon recognition that the syndrome does not seem to be seasonally restricted, and that it may not be a "disease" in the standard sense—that there may not be a specific causative agent—the syndrome was renamed.[12]

A well-documented outbreak of colony losses spread from the Isle of Wight to the rest of the UK in 1906. These losses later were attributed to a combination of factors, including adverse weather, intensive apiculture leading to inadequate forage, and a new infection, the chronic bee paralysis virus, [13] but at the time, the cause of this agricultural beekeeping problem was similarly mysterious and unknown.

Reports show this behavior in hives in the US in 1918[14] and 1919.[15] Coined "mystery disease" by some,[16] it eventually became more widely known as "disappearing disease".[17] Oertel, in 1965,[18] reported that hives afflicted with disappearing disease in Louisiana had plenty of honey in the combs, although few or no bees were present, discrediting reports that attributed the disappearances to lack of food.

From 1972 to 2006, dramatic reductions continued in the number of feral honey bees in the U.S.[19] and a significant though somewhat gradual decline in the number of colonies maintained by beekeepers. This decline includes the cumulative losses from all factors, such as urbanization, pesticide use, tracheal and Varroa mites, and commercial beekeepers' retiring and going out of business. However, in late 2006 and early 2007, the rate of attrition was alleged to have reached new proportions, and the term "colony collapse disorder" began to be used to describe this sudden rash of disappearances (sometimes referred to as "spontaneous hive collapse" or the "Mary Celeste syndrome" in the United Kingdom).[3][20]

Losses had remained stable since the 1990s at 17%–20% per year attributable to a variety of factors, such as mites, diseases, and management stress.[21] The first report of CCD was in mid-November 2006 by a Pennsylvania beekeeper overwintering in Florida. By February 2007, large commercial migratory beekeepers in several states had reported heavy losses associated with CCD. Their reports of losses varied widely, ranging from 30% to 90% of their bee colonies; in some cases, beekeepers reported losses of nearly all of their colonies with surviving colonies so weakened that they might no longer be viable to pollinate or produce honey.[22]

Losses were reported in migratory operations wintering in California, Florida, Oklahoma, and Texas. In late February, some larger nonmigratory beekeepers in the mid-Atlantic and Pacific Northwest regions also reported significant losses of more than 50%.[citation needed] Colony losses also were reported in five Canadian provinces, several European countries, and countries in South and Central America and Asia. In 2010, the USDA reported that data on overall honey bee losses for 2010 indicated an estimated 34% loss, which is statistically similar to losses reported in 2007, 2008, and 2009.[22]

After bee populations dropped 23% in the winter of 2013, the Environmental Protection Agency and Department of Agriculture formed a task force to address the issue.[23]

Signs and symptoms

In collapsed colonies, CCD is suspected when a complete absence of adult bees is found in colonies, with no or little buildup of dead bees in the hive or in front of the hive. A colony which has collapsed from CCD is generally characterized by all of these conditions occurring simultaneously:[24]
  • Presence of capped brood in abandoned colonies: Bees normally will not abandon a hive until the capped brood have all hatched.
  • Presence of food stores, both honey and bee pollen:
  • Presence of the queen bee: If the queen is not present, the hive died because it was queenless, which is not considered CCD.
Precursor symptoms that may arise before the final colony collapse are:
  • Insufficient workforce to maintain the brood that is present
  • Workforce seems to be made up of young adult bees
  • The colony members are reluctant to consume provided feed, such as sugar syrup and protein supplement.

Scope and distribution

North America

The National Agriculture Statistics Service reported 2.44 million honey-producing hives were in the United States in February 2008, down from 4.5 million in 1980, and 5.9 million in 1947, though these numbers underestimate the total number of managed hives, as they exclude several thousand hives managed for pollination contracts only, and also do not include hives managed by beekeepers owning fewer than five hives. This under-representation may be offset by the practice of counting some hives more than once; hives that are moved to different states to produce honey are counted in each state's total and summed in total counts.[25]

Non-CCD winter losses as high as 50% have occurred in some years and regions (e.g., 2000–2001 in Pennsylvania). Normal winter losses are typically considered to be in the range of 15–25%. In many cases, beekeepers reporting significant losses of bees did not experience true CCD, but losses due to other causes.

In 2007 in the US, at least 24 different states,[26] as well as portions of Canada, had reported at least one case of CCD.[27] In a 2007 survey of 384 responding beekeepers from 13 states, 23.8% met the specified criterion for CCD (that 50% or more of their dead colonies were found without bees and/or with very few dead bees in the hive or apiary).[27]

In the US in 2006–2007, CCD-suffering operations had a total loss of 45% compared to the total loss of 25% of all colonies experienced by non-CCD suffering beekeepers.[25][27]

A 2007–2008 survey of over 19% of all colonies revealed a total loss of 35.8%. Operations that pollinated almonds lost, on average, the same number of colonies as those that did not. The 37.9% of operations that reported having at least some of their colonies die with a complete lack of bees had a total loss of 40.8% of colonies compared to the 17.1% loss reported by beekeepers without this symptom. Large operations were more likely to have this symptom, suggesting a contagious condition may be a causal factor. About 60% of all colonies that were reported dead in this survey died without the presence of dead bees in the hive, thus possibly suffered from CCD.[25]

In 2010, the USDA reported that data on overall honey bee losses for the year indicate an estimated 34% loss, which is statistically similar to losses reported in 2007, 2008, and 2009.[22] In 2011, the loss was 30%.[28] In 2012–2013, CCD was blamed for the loss of about half of the US honeybee hives, far more than the 33% losses observed on average over previous years.

Europe

According to the European Food Safety Authority (EFSA), in 2007, the United Kingdom had 274,000 hives, Italy had 1,091,630, and France 1,283,810. In 2008, the British Beekeepers Association reported the bee population in the United Kingdom dropped by around 30% between 2007 and 2008, and an EFSA study revealed that in Italy the mortality rate was 40–50%. However, EFSA officials point out the figures are not very reliable because before the bees started dying, no harmonisation was used in the way different countries collected statistics on their bee populations. At that time (2008), the reports blamed the high death rate on the varroa mite, two seasons of unusually wet European summers, and some pesticides.[29]

In 2010, David Aston of the British Beekeepers’ Association stated, "We still do not believe CCD (which is now better defined) is a cause of colony losses in the UK, however we are continuing to experience colony losses, many if not most of which can be explained". He feels recent studies suggest "further evidence to the evolving picture that there are complex interactions taking place between a number of factors, pathogens, environmental, beekeeping practices and other stressors, which are causing honey bee losses described as CCD in the US".[30]

In 2009, Tim Lovett, president of the British Beekeepers' Association, said: "Anecdotally, it is hugely variable. There are reports of some beekeepers losing almost a third of their hives and others losing none. John Chapple, chairman of the London Beekeepers' Association, put losses among his 150 members at between a fifth and a quarter. "There are still a lot of mysterious disappearances; we are no nearer to knowing what is causing them." The government's National Bee Unit continued to deny the existence of CCD in Britain; it attributes the heavy losses to the varroa mite and rainy summers that stop bees foraging for food.[31]

Beekeepers in Scotland also reported losses for the past three years. Andrew Scarlett, a Perthshire-based bee farmer and honey packer, lost 80% of his 1,200 hives during the 2009 winter. He attributed the losses to a virulent bacterial infection that quickly spread because of a lack of bee inspectors, coupled with sustained poor weather that prevented honeybees from building up sufficient pollen and nectar stores.[31]

In Germany, where some of the first reports of CCD in Europe appeared, and where, according to the German national association of beekeepers, 40% of the honey bee colonies died,[32] there was no scientific confirmation; in early May 2007, the German media reported no confirmed CCD cases seemed to have occurred in Germany.[33][34]

At the end of May 2012, the Swiss government reported about half of the bee population had not survived the winter. The main cause of the decline was thought to be the parasite Varroa destructor.[35]

Possible causes

The mechanisms of CCD are still unknown, but many causes are currently being considered, such as pesticides, mites, fungus, beekeeping practices (such as the use of antibiotics or long-distance transportation of beehives), malnutrition, other pathogens, and immunodeficiencies. The current scientific consensus is that no single factor is causing CCD, but that some of these factors in combination may lead to CCD either additively or synergistically.[36][37][38][39][40][41][42]

In 2006, the Colony Collapse Disorder Working Group, based primarily at Pennsylvania State University, was established. Their preliminary report pointed out some patterns, but drew no strong conclusions.[2] A survey of beekeepers early in 2007 indicated most hobbyist beekeepers believed that starvation was the leading cause of death in their colonies, while commercial beekeepers overwhelmingly believed invertebrate pests (Varroa mites, honey bee tracheal mites, and/or small hive beetles) were the leading cause of colony mortality.[27] A scholarly review in June 2007 similarly addressed numerous theories and possible contributing factor, but left the issue unresolved.[1]

In July 2007, the United States Department of Agriculture (USDA) released its "CCD Action Plan", which outlined a strategy for addressing CCD consisting of four main components:[43]
  1. survey and data collection
  2. analysis of samples
  3. hypothesis-driven research
  4. mitigation and preventive action
In July 2009, the first annual report of the U.S. Colony Collapse Disorder Steering Committee was published.[44] It suggested CCD may be caused by the interaction of many agents in combination.[45]
Similarly, in 2009, the CCD Working Group published a comprehensive descriptive study that concluded: "Of the 61 variables quantified (including adult bee physiology, pathogen loads, and pesticide levels), no single factor was found with enough consistency to suggest one causal agent. Bees in CCD colonies had higher pathogen loads and were co-infected with more pathogens than control populations, suggesting either greater pathogen exposure or reduced defenses in CCD bees."[46]

The second annual Steering Committee report was released in November 2010. The group reported, although many associations, including pesticides, parasites, and pathogens have been identified throughout the course of research, "it is becoming increasingly clear that no single factor alone is responsible for [CCD]". Their findings indicated an absence of damaging levels of the parasite Nosema or parasitic Varroa mites at the time of collapse.[22]

They did find an association of sublethal effects of some pesticides with CCD, including two common miticides in particular, coumaphos and fluvalinate, which are pesticides registered for use by beekeepers to control varroa mites. Studies also identified sublethal effects of neonicotinoids and fungicides, pesticides that may impair the bees' immune systems and may leave them more susceptible to bee viruses.[22][47][48]

Pesticides

According to the USDA, pesticides may be contributing to CCD.[49] A 2013 peer-reviewed literature review concluded neonicotinoids in the amounts typically used harm bees and safer alternatives are urgently needed.[50] At the same time, other sources suggest the evidence is not conclusive, and that clarity regarding the facts is hampered by the role played by various issue advocates and lobby groups.[51]

Scientists have long been concerned that pesticides and possibly some fungicides may have sublethal effects on bees, not killing them outright, but instead impairing their development and behavior. Of special interest is the class of insecticides called neonicotinoids, which contain the active ingredient imidacloprid, and similar other chemicals, such as clothianidin and thiamethoxam. Honey bees may be affected by such chemicals when they are used as a seed treatment because they are known to work their way through the plant up into the flowers and leave residues in the nectar. The doses taken up by bees are not lethal, but possible chronic problems could be caused by long-term exposure.[21] Most corn grown in the US is treated with neonicoticoids, and a 2012 study found high levels of clothianidin in pneumatic planter exhaust. In the study, the insecticide was present in the soil of unplanted fields near those planted with corn and on dandelions growing near those fields.[52] Another 2012 study also found clothianidin and imidacloprid in the exhaust of pneumatic seeding equipment.

A 2010 survey reported 98 pesticides and metabolites detected in aggregate concentrations up to 214 ppm in bee pollen; this figure represents over half of the individual pesticide incidences ever reported for apiaries. It was suggested that "while exposure to many of these neurotoxicants elicits acute and sublethal reductions in honey bee fitness, the effects of these materials in combinations and their direct association with CCD or declining bee health remains to be determined."[53]

Evaluating pesticide contributions to CCD is particularly difficult for several reasons. First, the variety of pesticides in use in the different areas reporting CCD makes it difficult to test for all possible pesticides simultaneously. Second, many commercial beekeeping operations are mobile, transporting hives over large geographic distances over the course of a season, potentially exposing the colonies to different pesticides at each location. Third, the bees themselves place pollen and honey into long-term storage, effectively meaning a delay may occur from days to months before contaminated provisions are fed to the colony, negating any attempts to associate the appearance of symptoms with the actual time at which exposure to pesticides occurred.

Pesticides used on bee forage are far more likely to enter the colony by the pollen stores rather than nectar (because pollen is carried externally on the bees, while nectar is carried internally, and may kill the bee if too toxic), though not all potentially lethal chemicals, either natural or man-made, affect the adult bees; many primarily affect the brood, but brood die-off does not appear to be happening in CCD. Most significantly, brood are not fed honey, and adult bees consume relatively little pollen; accordingly, the pattern in CCD suggests, if contaminants or toxins from the environment 'are' responsible, it is most likely to be via the honey, as the adults are dying (or leaving), not the brood (though possibly effects of contaminated pollen consumed by juveniles may only show after they have developed into adults).

To date, most of the evaluation of possible roles of pesticides in CCD have relied on the use of surveys submitted by beekeepers, but direct testing of samples from affected colonies seems likely to be needed, especially given the possible role of systemic insecticides such as the neonicotinoid imidacloprid (which are applied to the soil and taken up into the plant's tissues, including pollen and nectar), which may be applied to a crop when the beekeeper is not present. The known effects of imidacloprid on insects, including honey bees, are consistent with the symptoms of CCD;[54] for example, the effects of imidacloprid on termites include apparent failure of the immune system, and disorientation.[55]

In Europe, the interaction of the phenomenon of "dying bees" with imidacloprid has been discussed for quite some time.[56][57][58] A study from the "Comité Scientifique et Technique (CST)" was at the center of discussion, and led to a partial ban of imidacloprid in France. The imidacloprid pesticide Gaucho was banned in 1999 by the French Minister of Agriculture Jean Glavany, primarily due to concern over potential effects on honey bees.[59][60][61] Subsequently, when fipronil, a phenylpyrazole insecticide and in Europe mainly labeled "Regent", was used as a replacement, it was also found to be toxic to bees, and banned partially in France in 2004.[62]

In February 2007, about 40 French deputies, led by Jacques Remiller of the UMP, requested the creation of a parliamentary investigation commission on overmortality of bees, underlining that honey production had decreased by 1,000 tons a year for a decade. By August 2007, no investigation had opened.[63] Five other insecticides based on fipronil were also accused of killing bees. However, the scientific committees of the European Union are still of the opinion "that the available monitoring studies were mainly performed in France and EU-member-states should consider the relevance of these studies for the circumstances in their country".[64]

Around the same time French beekeepers succeeded in banning neonicotinoids, the Clinton administration permitted pesticides which were previously banned,[65] including imidacloprid. In 2004, the Bush administration reduced regulations further and pesticide applications increased.[66][67]
In 2005, a team of scientists led by the National Institute of Beekeeping in Bologna, Italy, found pollen obtained from seeds dressed with imidacloprid contain significant levels of the insecticide, and suggested the polluted pollen might cause honey bee colony death.[68] Analysis of maize and sunflower crops originating from seeds dressed with imidacloprid suggest large amounts of the insecticide will be carried back to honey bee colonies.[69] Sublethal doses of imidacloprid in sucrose solution have also been documented to affect homing and foraging activity of honey bees.[70]
Imidacloprid in sucrose solution fed to bees in the laboratory impaired their communication for a few hours.[71] Sublethal doses of imidacloprid in laboratory and field experiment decreased flight activity and olfactory discrimination, and olfactory learning performance was impaired.[72]

Research, in 2008, by scientists from Pennsylvania State University found high levels of the pesticides fluvalinate and coumaphos in samples of wax from hives, as well as lower levels of 70 other pesticides.[46] These chemicals have been used to try to eradicate varroa mites, a bee pest that itself has been thought to be a cause of CCD. Researchers from Washington State University, under entomology professor Steve Sheppard in 2009, confirmed high levels of pesticide residue in hive wax and found an association between it and significantly reduced bee longevity.[73]

The WSU work also focused on the impact of the microsporidian pathogen Nosema ceranae, the build-up of which was high in the majority of the bees tested, even after large doses of the antibiotic fumagillin. Penn State's Dr. Maryann Frazier said, "Pesticides alone have not shown they are the cause of CCD. We believe that it is a combination of a variety of factors, possibly including mites, viruses and pesticides."[73]

In 2010, fipronil was blamed for the spread of CCD among bees, in a study by the Minutes-Association for Technical Coordination Fund in France, which found that even at very low nonlethal doses, this pesticide still impairs the ability to locate the hive, resulting in large numbers of foragers lost with every pollen-finding expedition, though no mention was made regarding any of the other symptoms of CCD;[74] other studies, however, have shown no acute effect of fipronil on honey bees.[75] Fipronil is designed to eliminate insects similar to bees, such as yellowjackets (Vespula germanica) and many other colonial pests by a process of 'toxic baiting', whereby one insect returning to the hive spreads the pesticide among the brood.[76]

A large 2010 survey of healthy and CCD-affected colonies also revealed elevated levels of pesticides in wax and pollen, but the amounts of pesticides were similar in both failing and healthy hives. They also confirmed suspected links between CCD and poor colony health, inadequate diet, and long-distance transportation. Studies continue to show very high levels of pathogens in CCD-affected samples and lower pathogen levels in unaffected samples, consistent with the empirical observation that healthy honey bee colonies normally fend off pathogens. These observations have led to the hypothesis that bee declines are resulting from immune suppression.[22]

In 2012, researchers announced findings that sublethal exposure to imidacloprid rendered honey bees significantly more susceptible to infection by the fungus Nosema, thereby suggesting a potential link to CCD, given that Nosema is increasingly considered to contribute to CCD.[77]

Neonicotinoids may interfere with bees' natural homing abilities, causing them to become disoriented and preventing them from finding their way back to the hive.[78][79][80]

Also, in 2012, researchers in Italy published findings that the pneumatic drilling machines that plant corn seeds coated with clothianidin and imidacloprid release large amounts of the pesticide into the air, causing significant mortality in foraging honey bees. According to the study, "Experimental results show that the environmental release of particles containing neonicotinoids can produce high exposure levels for bees, with lethal effects compatible with colony losses phenomena observed by beekeepers."[81] Commonly used pesticides, such as the imidacloprid, reduce colony growth and new queen production in experimental exposure matched to field levels.[82] Lu et al. (2012) reported they were able to replicate CCD with imidacloprid.[83] Another neonicotinoid, thiamethoxam, causes navigational homing failure of foraging bees, with high mortality.[84]

A 2012 in situ study provided strong evidence that exposure to sublethal levels of imidacloprid in high fructose corn syrup (HFCS) used to feed honey bees when forage is not available causes bees to exhibit symptoms consistent to CCD 23 weeks after imidacloprid dosing. The researchers suggested, "the observed delayed mortality in honey bees caused by imidacloprid in HFCS is a novel and plausible mechanism for CCD, and should be validated in future studies".[85][86]

In March 2013, two studies were published showing that neonicotinoids affect bee long-term and short-term memory, suggesting a cause of action resulting in failure to return to the hive.[87][88] In another study done in 2013, scientists reported that experiments suggested that exposure to the neonicotinoid pesticides clothianidin and imidicloprid results in increased levels of a particular protein in bees that inhibits a key molecule involved in the immune response, making the insects more susceptible to attack by harmful viruses.[89] Growth in the use of neonicotinoid pesticides has roughly tracked rising bee deaths.[8][90] A 2013 peer reviewed literature review concluded that neonicotinoids in the amounts that they are typically used harm bees and that safer alternatives are urgently needed.[50]

European Food Safety Authority statement

In 2012, several peer-reviewed independent studies were published showing that neonicotinoids had previously undetected routes of exposure affecting bees including through dust, pollen, and nectar[81] and that subnanogram toxicity resulted in failure to return to the hive without immediate lethality,[91] one primary symptom of CCD.[77] Research also showed environmental persistence in agricultural irrigation channels and soil.[92] These reports prompted a formal peer review by the European Food Safety Authority, which stated in January 2013 that some neonicotinoids pose an unacceptably high risk to bees, and identified several data gaps not previously considered. Their review concluded, "A high acute risk to honey bees was identified from exposure via dust drift for the seed treatment uses in maize, oilseed rape and cereals. A high acute risk was also identified from exposure via residues in nectar and/or pollen."[93][94] Dave Goulson, an author of one of the studies which prompted the EFSA review, has suggested that industry science pertaining to neonicotinoids may have been deliberately deceptive, and the UK Parliament has asked manufacturer Bayer Cropscience to explain discrepancies in evidence they have submitted to an investigation.[95]

Neonicotinoids banned by European Union

Early in 2013, the European Food Safety Authority issued a declaration that three specific neonicotinoid pesticides pose an acute risk to honeybees, and the European Commission (EC) proposed a two-year ban on them.[96] David Goulson, who led one of the key 2012 studies at the University of Stirling, said the decision "begs the question of what was going on when these chemicals were first approved." The chemical manufacturer Bayer said it was "ready to work with" the EC and member states.[97] In April 2013, the European Union voted for a two-year restriction on neonicotinoid insecticides. The ban will restrict the use of imidacloprid, clothianidin, and thiamethoxam for use on crops that are attractive to bees. Eight nations voted against the motion, including the British government, which argued that the science was incomplete.[98] The ban can be seen as an application of the "precautionary principle", established at the 1992 Rio Conference on the Environment and Development, which advocates that "lack of full scientific certainty shall not be used as a reason for postponing cost-effective measures to prevent environmental degradation". [99][100]

Initiatives to ban neonicotinoids in the United States

In March 2013, professional beekeepers and environmentalists jointly filed a lawsuit against the United States Environmental Protection Agency (EPA) for continuing to allow the use of neonicotinoids in the United States. The suit specifically asks for suspension of clothianidin and thiamethoxam. The lawsuit follows a dramatic die off of bees in the United States, with some beekeepers losing 50% of their hives.[101] The EPA responded to the suit by issuing a report blaming the Varroa mite for the decline in bees and claiming the role of neonicotinoids in bee extinction has been overstated.[102]

Also in 2013, the Save America's Pollinators Act of 2013 (H.R. 2692) was introduced in Congress by Earl Blumenauer of Oregon.[103][104] The proposed act, spearheaded by Representatives John Conyers (D, MI) and Earl Blumenauer (D, OR), and cosponsored by Rep. Lucille Roybal-Allard (D, CA) and Rep. Carol Shea-Porter (D, NH), asks that neonicotinoids be suspended until a full review of their impacts has occurred.

In 2010 a French study found that even at very low nonlethal doses, it still impairs the ability to locate the hive, resulting in large numbers of foragers lost with every pollen-finding expedition.[74] Other studies, however, showed no acute effect of Fipronil on honey bees.[75]

Pathogens and immunodeficiency theories

Early researchers commented that the pathway of propagation functions in the manner of a contagious disease; however, some sentiment existed that the disorder may involve an immunosuppressive mechanism,[105] potentially linked to "stress" leading to a weakened immune system. Specifically, according to research done in 2007 at the Pennsylvania State University: "The magnitude of detected infectious agents in the adult bees suggests some type of immunosuppression". These researchers initially suggested a connection between Varroa destructor mite infestation and CCD, suggesting that a combination of these bee mites, deformed wing virus (which the mites transmit) and bacteria work together to suppress immunity and may be one cause of CCD.[2][106]
When a colony is dying, for whatever cause, and other healthy colonies are nearby (as is typical in a bee yard), those healthy colonies often enter the dying colony and rob its provisions for their own use. If the dying colony's provisions were contaminated (by natural or man-made toxins), the resulting pattern (of healthy colonies becoming sick when in proximity to a dying colony) might suggest to an observer that a contagious disease is involved. However, it is typical in CCD cases that provisions of dying colonies are not being robbed, suggesting that at least this particular mechanism (toxins being spread via robbing, thereby mimicking a disease) is not involved in CCD. Additional evidence that CCD is an infectious disease came from the following observations: the hives of colonies that had died from CCD could be reused with a healthy colony only if they were first treated with DNA-destroying radiation,[107] and the CCD Working Group report in 2010 indicated that CCD-exhibiting hives tended to occur in proximity to one another within apiaries.[46]

Varroa mites

Varroa destructor on a honey bee host

According to a 2007 article, the mite Varroa destructor remains the world's most destructive honey bee killer, due in part to the viruses it carries, including deformed wing virus and acute bee paralysis virus, which have both been implicated in CCD.[106][108] Affliction with Varroa mites also tends to weaken the immune system of the bees. Dr. Enesto Guzman, an entomological researcher at the University of Guelph in Canada, studied 413 Ontario bee colonies in 2007–08. About 27% of hives did not survive the winter, and the Varroa mite was identified as the cause in 85% of the cases.[109] As such, Varroa mites have been considered as a possible cause of CCD, though not all dying colonies contain these mites.[110]

Israeli acute paralysis virus

In 2004, Israeli acute paralysis virus (IAPV), was discovered in Israel and at one time it was considered the cause of CCD. It was named after the place it was first identified; its place of origin is unknown. In September 2007, results of a large-scale statistical RNA sequencing study of afflicted and unafflicted colonies were reported. RNA from all organisms in a colony was sequenced and compared with sequence databases to detect the presence of pathogens. All colonies were found to be infected with numerous pathogens, but only the IAPV virus showed a significant association with CCD: the virus was found in 25 of the 30 tested CCD colonies, and only in one of the 21 tested non-CCD colonies.[107][111]

Research in 2009 has found that an indicator for an impaired protein production is common among all bees affected by CCD, a pattern consistent with IAPV infection. It is conjectured that Dicistroviridae, like the IAPV, cause degradation of the ribosomes, which are responsible for protein production of cells, and that this reduced ribosomal function weakens the bees, making them more vulnerable to factors that might not otherwise be lethal.[112][113]

Nosema

Some have suggested the syndrome may be an inability by beekeepers to correctly identify known diseases such as European foulbrood or the microsporidian fungus Nosema apis. The testing and diagnosis of samples from affected colonies (already performed) makes this highly unlikely, as the symptoms are fairly well known and differ from what is classified as CCD. A high rate of Nosema infection was reported in samples of bees from Pennsylvania, but this pattern was not reported from samples elsewhere.[2]

Mariano Higes, a scientist heading a team at a government-funded apiculture centre in Guadalajara, Spain, has reported that when hives of European honey bees were infected with Nosema ceranae, a microsporidian fungus, the colonies were wiped out within eight days.[114] Higes has extrapolated from this research to conclude that CCD is caused by N. ceranae. Higes and his team have worked on this problem since 2000, and claim to have ruled out many other potential causes.[115][116] However, a 2009 comprehensive survey of CCD-affected bee populations in the United States suggested CCD likely involves an interaction between pathogens and other stress factors. They reported their survey found only about half of the colonies sampled, both in CCD and control populations, were infected with N. ceranae.[46]

The primary antifungal agent used against Nosema is fumagillin, which has been used in a German research project to reduce the microsporidian's impact, and is mentioned as a possible remedy by the CCDWG.[117] Higes also claims to have successfully cured colonies with fumagillin.[118][119] A review of these results described these results as promising, but cautioned "N. ceranae may not be to blame for all cases of colony collapse".[120] Various areas in Europe have reported this fungus, but no direct link to CCD has yet been established.[121][122]

Highly preliminary evidence of N. ceranae was recently reported in a few hives in the Merced Valley area of California.[123][124] The researcher did not, however, believe this was conclusive evidence of a link to CCD; "We don't want to give anybody the impression that this thing has been solved".[125] A USDA bee scientist has similarly stated, "while the parasite Nosema ceranae may be a factor, it cannot be the sole cause. The fungus has been seen before, sometimes in colonies that were healthy".[126] Likewise, a Washington beekeeper familiar with N. ceranae in his own hives, discounts it as being the cause of CCD.[127]

In the United States, N. ceranae has been detected in honey bees from Nebraska, Wisconsin, Arkansas, New York, and South Dakota using PCR of the 16S gene.[128][129] In New York, N. ceranae was detected in 49 counties, and of the 1,200 honey bee samples collected, 528 (44%) were positive for Nosema, from which, PCR analysis of 371 spore positive samples revealed 96% were N. ceranae, 3% had both N. ceranae and N. apis, and 1% had N. apis only.[130]

Viral and fungal combination

A University of Montana and Montana State University team of scientists headed by Jerry Bromenshenk and working with the US Army's Edgewood Chemical Biological Center published a paper in October 2010 saying that a new DNA virus, invertebrate iridescent virus or IIV6, and the fungus Nosema ceranae were found in every killed colony the group studied. In their study, they found neither agent alone seemed deadly, but a combination of the virus and N. ceranae was always 100% fatal.[131][132][133] Information about the study was released to the public in a front page article in The New York Times.[134] A few days later, an article was published in Fortune Magazine with the title, "What a scientist didn't tell the New York Times about his study on bee deaths". Professor of entomology at Penn State University James Frazier, who is currently researching the sublethal impact of pesticides on bees, said that while Bromenshenk's study generated some useful data, Bromenshenk has a conflict of interest as CEO of a company developing scanners to diagnose bee diseases.[135] A few months later, the methods used to interpret the mass spectrometry data in the Bromenshenk study were called into question, raising doubts as to whether IIV6 was ever correctly identified in any of the samples examined.[136][137]

Fungicides

In 2013, researchers collected pollen from hives and fed it to healthy bees. The pollen had an average of nine different pesticides and fungicides. Further, the researchers discovered that bees that ate pollen with fungicides were three times more likely to be infected by parasites. Their study shows that fungicides, thought harmless to bees, may actually play a significant role in CCD. Their research also showed that spraying practices may need to be reviewed because the bees sampled by the authors foraged not from crops, but almost exclusively from weeds and wildflowers, suggesting that bees are more widely exposed to pesticides than thought.[138]

Antibiotics and miticides

Most beekeepers affected by CCD report that they use antibiotics and miticides in their colonies, though the lack of uniformity as to which particular chemicals are used[2] makes it seem unlikely that any single such chemical is involved. However, it is possible that not all such chemicals in use have been tested for possible effects on honey bees, and could therefore potentially be contributing to the CCD phenomenon.[1][139]

Fluvalinate/coumaphos

Research, in 2008, by scientists from Pennsylvania State University found high levels of the pesticides fluvalinate and coumaphos in samples of wax from hives, as well as lower levels of 70 other pesticides.[46] These chemicals have been used to try to eradicate varroa mites, a bee pest that itself has been thought to be a cause of CCD. A 2009 study confirmed high levels of pesticide residue in hive wax and found an association between it and significantly reduced bee longevity.[73] The microsporidian pathogen Nosema ceranae, was found in high concentrations in the majority of the bees tested, even after administering large doses of the antibiotic fumagillin. Maryann Frazier commented, "Pesticides alone have not shown they are the cause of CCD. We believe that it is a combination of a variety of factors, possibly including mites, viruses and pesticides."[73]

Bee rentals and migratory beekeeping

Moving spring bees from South Carolina to Maine for blueberry pollination

Since U.S. beekeeper Nephi Miller first began moving his hives to different areas of the country for the winter of 1908, migratory beekeeping has become widespread in America.

Bee rental for pollination is a crucial element of U.S. agriculture, which could not produce anywhere near its current levels with native pollinators alone.[140] U.S. beekeepers collectively earn much more from renting their bees out for pollination than they do from honey production.

Researchers are concerned that trucking colonies around the country to pollinate crops, where they intermingle with other bees from all over, helps spread viruses and mites among colonies. Additionally, such continuous movement and re-settlement is considered by some a strain and disruption for the entire hive, possibly rendering it less resistant to all sorts of systemic disorder.[141]

Selective commercial breeding and lost genetic diversity in industrial apiculture

Most of the focus on CCD has been toward environmental factors. CCD is a condition recognised for greatest impact in regions of 'industrial' or agricultural use of commercially bred bee colonies.
Natural breeding and colony reproduction of wild bees is a complex and highly selective process, leading to a diverse genetic makeup in large populations of bees, both within[142] and between colonies.[citation needed] Genetic diversity through sexual reproduction is a significant evolutionary factor in resistance to parasites and infectious diseases.[citation needed] Many artificially bred species, especially domestic and agricultural species, suffer from lack of genetic variation.[citation needed] resulting in increased risk of hereditable diseases, loss of vitality or vigour, and heightened uniform susceptibility to infectious diseases.[citation needed] There may be an analogy in artificially introduced invasive ants, which displace native species by their ecological release and supercolonies (a manifestation of genetic homogeneity), only to suffer collapse of colonies attributed to lack of genetic diversity.[143][144] Displaced indigenous species rebounded from residual populations.

Industrial apiculture has adopted simple breeding programs[145] for uniform desired traits, and seasonal transportation of colonies over vast distances causes increased infectious exposures from mixing of these domestic and residual displaced wild populations..[citation needed] Brood incubation conditions may be stressful with respect to deficient nutrition, temperature[146] and other basics. This combination of ecological factors, especially the host factor of loss of genetic variation and hybrid vigor, may account for the apparent multifactorial environmental 'causes' of CCD including concurrent infections.[citation needed]

Malnutrition

In 2007, one of the patterns reported by the CCD Study Group at Pennsylvania State was that all producers in a preliminary survey noted a period of "extraordinary stress" affecting the colonies in question prior to their die-off, most commonly involving poor nutrition and/or drought.[2] This was the only factor that all of the cases of CCD had in common in the report; accordingly, there appeared to be at least some significant possibility that the phenomenon was correlated to nutritional stress that may not manifest in healthy, well-nourished colonies. This was similar to the findings of another independent survey done in 2007 in which small-scale beekeeping operations (up to 500 colonies) in several states reported their belief that malnutrition and/or weak colonies was the factor responsible for their bees dying in over 50% of the cases, whether the losses were believed to be due to CCD or not.[27]

Some researchers have attributed the syndrome to the practice of feeding high-fructose corn syrup (HFCS) to supplement winter stores. The variability of HFCS may be relevant to the apparent inconsistencies of results. One European writer has suggested a possible connection with HFCS produced from genetically modified corn.[5] If this were the sole factor involved, however, this should also lead to the exclusive appearance of CCD in wintering colonies being fed HFCS, but many reports of CCD occur in other contexts with beekeepers who do not use HFCS.

Other researchers state that colony collapse disorder is mainly a problem of feeding the bees a monoculture diet when they should receive food from a variety of sources/plants. In winter, the bees are given a single food source such as corn syrup (high-fructose or other), sugar and pollen substitute. In summer, they may only pollinate a single crop (e.g., almonds, cherries, or apples).[147]

A study published in 2010 found that bees that were fed pollen from a variety of different plant species showed signs of having a healthier immune system than those eating pollen from a single species. Bees fed pollen from five species had higher levels of glucose oxidase than bees fed pollen from one species, even if the pollen had a higher protein content. The authors hypothesised that CCD may be linked to a loss of plant diversity.[148]

A 2013 study found that p-coumaric acid, which is normally present in honey, assists bees in detoxifying certain pesticides. Its absence in artificial nutrients fed to bees may therefore contribute to CCD.[149]

Electromagnetic radiation

Despite considerable discussion on the Internet and in the lay media, there have been few studies published in peer reviewed scientific literature on effects of electromagnetic radiation on honey bees. In 2004, an exploratory study was conducted by investigators at the University of Landau on the non-thermal effects of radio frequency ("RF") on honey bees (Apis mellifera carnica). The investigators did not find any change in behavior due to RF exposure from DECT cordless phone base stations embedded in them, operating at 1880–1900 MHz.[150] In 2006, these same investigators extended this study and this time suggested that the close-range electromagnetic field ("EMF") may reduce the ability of bees to return to their hive; they also noticed a slight reduction in honeycomb weight in treated colonies.[151] In the course of their study, one half of their colonies broke down, including some of their controls which did not have DECT base stations embedded in them. In April 2007, news of this study appeared in various media outlets, beginning with an article in The Independent, which stated that the subject of the study included mobile phones and had related them to CCD.[152] Though cellular phones were implicated by other media reports at the time, they were not covered in the study. Researchers involved have since stated that their research did not include findings on cell phones, or their relationship to CCD, and indicated that the Independent article had misinterpreted their results and created "a horror story".[153][154]

In October 2011, a review study was published by the Indian government's Ministry of Environment and Forests that looked at 919 peer-reviewed scientific studies investigating impacts of EMF on birds, bees, humans, animals/wildlife, and plants.[155] Only 7 of the 919 studies involved honey bees, and 6 of these claimed negative effects from exposure to EMF radiation, but none specifically demonstrated any link to CCD. The review noted that according to one study,[156] when active mobile phones were kept inside beehives, worker bees stopped coming to the hives after ten days. The same study also found drastic decrease in the egg production of queen bees in these colonies and goes on to claim that "electromagnetic radiation exposure provides a better explanation for Colony Collapse Disorder (CCD) than other theories". In view of evidence from this and several other studies, the review authors concluded: "existing literature shows that the EMRs are interfering with the biological systems in more ways than one" and recommended recognising EMF as a pollutant. However, they also noted that "these studies are not representative of the real life situations or natural levels of EMF exposure. More studies need to be taken up to scientifically establish the link, if any, between the observed abnormalities and disorders in bee hives such as Colony Collapse Disorder (CCD)".

Parasitic phorid fly

While there are many possible causes of this CCD, research has not shown why the workers abandon the hive, one of the key markers of CCD. In January 2012, a researcher discovered Apocephalus borealis larvae, a parasitic fly known to prey on bumble bees and wasps, in the test tube of a dead honey bee believed to have been affected by CCD.[157] Since that time, it has been suggested that the phorid fly may be one of the causes of CCD. The fly lays eggs in the bees' abdomen and after they hatch the larva feed on the bee. Infected bees act oddly, foraging at night and gathering around lights like moths. Eventually the bee leaves the colony to die. The mature phorid fly larvae then emerge from the neck of the bee.[158][159]

Genetically modified crops

In 2008 a meta-analysis[160] of 25 independent studies assessing effects of Bt Cry proteins on honeybee survival (mortality) showed that Bt proteins used in commercialized GE crops to control lepidopteran and coleopteran pests do not negatively impact the survival of honeybee larvae or adults. Additionally, larvae consume only a small percent of their protein from pollen, and there is also a lack of geographic correlation between GM crop locations and regions where CCD occurs.[161]

Management

As of 1 March 2007, the Mid-Atlantic Apiculture Research and Extension Consortium (MAAREC) offered the following tentative recommendations for beekeepers noticing the symptoms of CCD:[117]
  1. Do not combine collapsing colonies with strong colonies.
  2. When a collapsed colony is found, store the equipment where you can use preventive measures to ensure that bees will not have access to it.
  3. If you feed your bees sugar syrup, use Fumagillin.
  4. If you are experiencing colony collapse and see a secondary infection, such as European Foulbrood, treat the colonies with oxytetracycline, not tylosin.
Another proposed remedy for farmers of pollinated crops is simply to switch from using beekeepers to the use of native bees, such as bumble bees and mason bees.[162][163] Native bees can be helped to establish themselves by providing suitable nesting locations and some additional crops the bees could use to feed from (e.g. when the pollination season of the commercial crops on the farm has ended).[164][165]

A British beekeeper successfully developed a strain of bees that are resistant to varroa mites.[166][167][168][169] Russian honey bees also resist infestations of varroa mites but are still susceptible to other factors associated with colony collapse disorder, and have detrimental traits that limit their relevance in commercial apiculture.

In the United Kingdom, a national bee database was set up in March 2009 to monitor colony collapse as a result of a 15% reduction in the bee population that had taken place over the previous two years.[170] In particular, the register, funded by the Department for Environment, Food and Rural Affairs and administered by the National Bee Unit, will be used to monitor health trends and help establish whether the honey industry is under threat from supposed colony collapse disorder. Britain's 20,000 beekeepers have been invited to participate. In October 2010, David Aston of the British Beekeepers’ Association stated, ‘We still do not believe CCD is a cause of colony losses in the UK, however we are continuing to experience colony losses, many if not most of which can be explained. The approach being taken in UK beekeeping is to raise the profile of integrated bee health management, in other words identifying and trying to eliminate factors which reduce the health status of a colony. This incorporates increasing the skill level of beekeepers through training and education, raising the profile of habitat destruction and its effect of forage (nectar and pollen) availability, and of course research on the incidence and distribution of diseases and conditions in the UK together with more applied research and development on providing solutions."[29][30]

Consequences

The phenomenon is particularly important for crops such as almond growing in California, where honey bees are the predominant pollinator and the crop value in 2006 was $1.5 billion. In 2000, the total U.S. crop value that was wholly dependent on honey bee pollination was estimated to exceed $15 billion.[171]
Honey bees are not native to the Americas, therefore their necessity as pollinators in the U.S. is limited to strictly agricultural/ornamental uses, as no native plants require honey bee pollination, except where concentrated in monoculture situations—where the pollination need is so great at bloom time that pollinators must be concentrated beyond the capacity of native bees (with current technology).

They are responsible for pollination of approximately one third of the United States' crop species, including such species as almonds, peaches, apples, pears, cherries, raspberries, blackberries, cranberries, watermelons, cantaloupes, cucumbers, and strawberries. Many, but not all, of these plants can be (and often are) pollinated by other insects in small holdings in the U.S., including other kinds of bees (e.g., squash bees on cucurbits[172]), but typically not on a commercial scale. While some farmers of a few kinds of native crops do bring in honey bees to help pollinate, none specifically need them, and when honey bees are absent from a region, there is a presumption that native pollinators may reclaim the niche, typically being better adapted to serve those plants (assuming that the plants normally occur in that specific area).

However, even though on a per-individual basis, many other species are actually more efficient at pollinating, on the 30% of crop types where honey bees are used, most native pollinators cannot be mass-utilized as easily or as effectively as honey bees—in many instances they will not visit the plants at all. Beehives can be moved from crop to crop as needed, and the bees will visit many plants in large numbers, compensating via saturation pollination for what they lack in efficiency. The commercial viability of these crops is therefore strongly tied to the beekeeping industry. In China, hand pollination of apple orchards is labor-intensive, time consuming, and costly.[173][174]

Media

A number of documentaries have been produced in which possible causes of CCD have been explored.
  • Silence of the Bees (October 2007) is a part of the Nature television series and covers several recent investigative discoveries.[175]
  • The 2009 documentary Vanishing of the Bees pointed to neonicotinoid pesticides as being the most likely culprit, though the experts interviewed concede that no firm data yet exists.[176]
  • Colony is a 2009 feature length documentary focusing on several beekeepers in the United States coping with colony collapse disorder.
  • The 2010 feature length documentary Queen of the Sun: What are the bees telling us? features interviews with beekeepers, scientists, farmers, and philosophers.[177]
  • The 2012 documentary, Nicotine Bees, appears to offer substantial anecdotal and scientific proof that the class of neo nicotinoid pesticides are principally responsible for Colony Collapse Disorder.[178]
  • More than Honey, a 2012 documentary, examines the relationship between humans and bees and explores the possible causes of CCD.[179]

Monday, November 24, 2014

Molten salt reactor

From Wikipedia, the free encyclopedia
Molten salt reactor scheme.

A molten salt reactor (MSR) is a class of nuclear fission reactors in which the primary coolant, or even the fuel itself, is a molten salt mixture. MSRs run at higher temperatures than water-cooled reactors for higher thermodynamic efficiency, while staying at low vapor pressure.

The nuclear fuel may be solid or dissolved in the coolant itself. In many designs the nuclear fuel is dissolved in the molten fluoride salt coolant as uranium tetrafluoride (UF4). The fluid becomes critical in a graphite core which serves as the moderator. Solid fuel designs rely on ceramic fuel dispersed in a graphite matrix, with the molten salt providing low pressure, high temperature cooling. The salts are much more efficient than compressed helium at removing heat from the core, reducing the need for pumping and piping and reducing the size of the core.

The early Aircraft Reactor Experiment (1954) was primarily motivated by the small size that the design could provide, while the Molten-Salt Reactor Experiment (1965–1969) was a prototype for a thorium fuel cycle breeder reactor nuclear power plant. One of the Generation IV reactor designs is a molten-salt-cooled, molten-salt-fuelled reactor (illustrated on the right); the initial reference design is 1000 MWe.[1]

History

Aircraft reactor experiment

Aircraft Reactor Experiment building at ORNL, it was later retrofitted for the MSRE.

Extensive research into molten salt reactors started with the U.S. aircraft reactor experiment (ARE) in support of the U.S. Aircraft Nuclear Propulsion program. The ARE was a 2.5 MWth nuclear reactor experiment designed to attain a high power density for use as an engine in a nuclear-powered bomber. The project included several reactor experiments including high temperature reactor and engine tests collectively called the Heat Transfer Reactor Experiments: HTRE-1, HTRE-2 and HTRE-3 at the National Reactor Test Station (now Idaho National Laboratory) as well as an experimental high-temperature molten salt reactor at Oak Ridge National Laboratory - the ARE. The ARE used molten fluoride salt NaF-ZrF4-UF4 (53-41-6 mol%) as fuel, was moderated by beryllium oxide (BeO), used liquid sodium as a secondary coolant and had a peak temperature of 860 °C. It operated for 100 MW-hours over nine days in 1954. This experiment used Inconel 600 alloy for the metal structure and piping.[2] After the ARE, another reactor was made critical at the Critical Experiments Facility of the Oak Ridge National Laboratory in 1957 as part of the circulating-fuel reactor program of the Pratt and Whitney Aircraft Company (PWAC). This was called the PWAR-1, the Pratt and Whitney Aircraft Reactor-1. The experiment was run for only a few weeks and at essentially zero nuclear power, but it was a critical reactor. The operating temperature was held constant at approximately 1250°F (677°C). Like the 2.5 MWt ARE, the PWAR-1 used NaF-ZrF4-UF4 as the primary fuel and coolant, making it one of the three critical molten salt reactors ever built. [3]

Molten-salt reactor experiment

MSRE plant diagram

Oak Ridge National Laboratory (ORNL) took the lead in researching the MSR through 1960s, and much of their work culminated with the Molten-Salt Reactor Experiment (MSRE). The MSRE was a 7.4 MWth test reactor simulating the neutronic "kernel" of a type of epithermal thorium molten salt breeder reactor called the Liquid fluoride thorium reactor. The large, expensive breeding blanket of thorium salt was omitted in favor of neutron measurements.

The MSRE was located at ORNL. Its piping, core vat and structural components were made from Hastelloy-N and its moderator was pyrolytic graphite. It went critical in 1965 and ran for four years. The fuel for the MSRE was LiF-BeF2-ZrF4-UF4 (65-29-5-1), the graphite core moderated it, and its secondary coolant was FLiBe (2LiF-BeF2). It reached temperatures as high as 650 °C and operated for the equivalent of about 1.5 years of full power operation.

Oak Ridge National Laboratory molten salt breeder reactor

The culmination of the Oak Ridge National Laboratory research during the 1970–1976 timeframe resulted in a proposed molten salt breeder reactor (MSBR) design which would use LiF-BeF2-ThF4-UF4 (72-16-12-0.4) as fuel, was to be moderated by graphite with a 4-year replacement schedule, use NaF-NaBF4 as the secondary coolant, and have a peak operating temperature of 705 °C.[4] Despite the success, the MSR program closed down in the early 1970s in favor of the liquid metal fast-breeder reactor (LMFBR),[5] after which research stagnated in the United States.[6][7] As of 2011, the ARE and the MSRE remained the only molten-salt reactors ever operated.
The MSBR project received funding until 1976. Inflation-adjusted to 1991 dollars, the project received $38.9 million from 1968 to 1976.[8]

The following reasons were cited as responsible for the program cancellation:
  • The political and technical support for the program in the United States was too thin geographically. Within the United States, only in Oak Ridge, Tennessee, was the technology well understood.[5]
  • The MSR program was in competition with the fast breeder program at the time, which got an early start and had copious government development funds being spent in many parts of the United States. When the MSR development program had progressed far enough to justify a greatly expanded program leading to commercial development, the AEC could not justify the diversion of substantial funds from the LMFBR to a competing program.[5]

Oak Ridge National Laboratory denatured molten salt reactor (DMSR)

In 1980, the engineering technology division at Oak Ridge National Laboratory published a paper entitled “Conceptual Design Characteristics of a Denatured Molten-Salt Reactor with Once-Through Fueling.” In it, the authors “examine the conceptual feasibility of a molten-salt power reactor fueled with denatured uranium-235 (i.e. with low-enriched uranium) and operated with a minimum of chemical processing.” The main priority behind the design characteristics is proliferation resistance.[9] Lessons learned from past projects and research at ORNL were taken into strong consideration. Although the DMSR can theoretically be fueled partially by thorium or plutonium, fueling solely on low enriched uranium (LEU) helps maximize proliferation resistance.

Another important goal of the DMSR is to minimize R&D required and to maximize feasibility. The Generation IV international Forum (GIF) includes “salt processing” as a technology gap for molten salt reactors.[10] The DMSR requires minimal chemical processing because it is a burner design as opposed to a breeder. Both experimental reactors built at ORNL were burner designs. In addition, the choices to use graphite for neutron moderation, and enhanced Hastelloy-N for piping simplify the design and reduce R&D needed.

Russian MSR research program

In Russia, a molten-salt reactor research program was started in the second half of the 1970s at the Kurchatov Institute. It covered a wide range of theoretical and experimental studies, particularly the investigation of mechanical, corrosion and radiation properties of the molten salt container materials.
The main findings of completed program supported the conclusion that there are no physical nor technological obstacles to the practical implementation of MSRs.[11] A reduction in activity occurred after 1986 due to the Chernobyl disaster, along with a general stagnation of nuclear power and nuclear industry.[12](p381)

Recent developments

Denatured molten salt reactor

Terrestrial Energy Inc. (TEI), a Canadian based company, is developing a DMSR design called the Integral Molten Salt Reactor (IMSR). The IMSR is designed to be deployable as a small modular reactor (SMR) and will be constructed in three power formulations ranging from 80 to 600 MWth. With high operating temperatures, the IMSR has application in industrial heat markets as well as traditional power markets. The main design features include neutron moderation from graphite (thermal spectrum), fueling with low-enriched uranium, and a compact and replaceable Core-unit. The latter feature permits the operational simplicity necessary for industrial deployment.[13]

Liquid-salt very-high-temperature reactor

As of September 2010, research was continuing for reactors that utilize molten salts for coolant. Both the traditional molten-salt reactor and the very high temperature reactor (VHTR) were selected as potential designs for study under the Generation Four Initiative (GEN-IV). A version of the VHTR being studied was the liquid-salt very-high-temperature reactor (LS-VHTR), also commonly called the advanced high-temperature reactor (AHTR).[citation needed] It is essentially a standard VHTR design that uses liquid salt as a coolant in the primary loop, rather than a single helium loop. It relies on "TRISO" fuel dispersed in graphite. Early AHTR research focused on graphite would be in the form of graphite rods that would be inserted in hexagonal moderating graphite blocks, but current studies focus primarily on pebble-type fuel.[citation needed] The LS-VHTR has many attractive features, including: the ability to work at very high temperatures (the boiling point of most molten salts being considered are >1400 °C); low-pressure cooling that can be used to more easily match hydrogen production facility conditions (most thermochemical cycles require temperatures in excess of 750 °C); better electric conversion efficiency than a helium-cooled VHTR operating at similar conditions; passive safety systems, and better retention of fission products in the event of an accident.[citation needed] This concept is now referred to as "fluoride salt-cooled high-temperature reactor" (FHR).[14]

Liquid fluoride thorium reactor

Reactors containing molten thorium salt, called liquid fluoride thorium reactors (LFTR), would tap the abundant energy source of the thorium fuel cycle. Private companies from Japan, Russia, Australia and the United States, and the Chinese government, have expressed interest in developing this technology.[15][16][17]

Advocates estimate that five hundred metric tons of thorium could supply all U.S. energy needs for one year.[18] The U.S. Geological Survey estimates that the largest known U.S. thorium deposit, the Lemhi Pass district on the Montana-Idaho border, contains thorium reserves of 64,000 metric tons of thorium.[19]

Fuji reactor

The FUJI MSR is a 100 to 200 MWe LFTR, using technology similar to the Oak Ridge National Laboratory Reactor. It is being developed by a consortium including members from Japan, the U.S. and Russia. It would likely take 20 years to develop a full size reactor[20] but the project seems to lack funding.[15]

Chinese project

Under the direction of Jiang Mianheng, The People’s Republic of China has initiated a research project in thorium molten-salt reactor technology. It was formally announced at the Chinese Academy of Sciences (CAS) annual conference in January 2011. The plan was "to build a tiny 2 MW plant using liquid fluoride fuel by the end of the decade, before scaling up to commercially viable size over the 2020s. It is also working on a pebble-bed reactor."[17][21] The proposed completion date for a test 2 MW pebble-bed solid thorium and molten salt cooled reactor has been delayed from 2015 to 2017. The proposed "test thorium molten-salt reactor" has also been delayed.[22]

Indian research

Ratan Kumar Sinha, Chairman of Atomic Energy Commission of India, stated in 2013: "India is also investigating Molten Salt Reactor (MSR) technology. We have molten salt loops operational at BARC."[23]

U.S. companies

Kirk Sorensen, former NASA scientist and chief nuclear technologist at Teledyne Brown Engineering, has been a long-time promoter of the thorium fuel cycle, coining the term liquid fluoride thorium reactor. In 2011, Sorensen founded Flibe Energy, a company aimed at developing 20-50 MW LFTR reactor designs to power military bases. (It is easier to approve novel military designs than civilian power station designs in today's US nuclear regulatory environment).[16][24][25][26]

Another startup company, Transatomic Power, has been created by Ph.D. students from MIT including Dr Leslie Dewan, ceo and Russ Wilcox of E Ink.[27] They are pursuing what they term a Waste-Annihilating Molten Salt Reactor (acronym WAMSR), focused on the potential to consume existing nuclear waste more thoroughly.[28][29]

Weinberg Foundation

The Weinberg Foundation is a British non-profit organization founded in 2011, dedicated to act as a communications, debate and lobbying hub to raise awareness about the potential of thorium energy and LFTR. It was formally launched at the House of Lords on 8 September 2011.[30][31][32] It is named after American nuclear physicist Alvin M. Weinberg, who pioneered the thorium molten salt reactor research.

Molten-salt fueling options

Molten-salt-cooled reactors

Molten-salt-fueled reactors are quite different from molten-salt-cooled solid-fuel reactors, called simply "molten salt reactor system" in the Generation IV proposal, also called MSCR, which is also the acronym for the Molten Salt Converter Reactor design. These reactors were additionally referred to as "advanced high-temperature reactors (AHTRs), but since about 2010 the preferred DOE designation is "fluoride high-temperature reactors (FHRs)".[34]

The FHR concept cannot reprocess fuel easily and has fuel rods that need to be fabricated and validated, delaying deployment by up to twenty years[citation needed] from project inception. However, since it uses fabricated fuel, reactor manufacturers can still profit by selling fuel assemblies.

The FHR retains the safety and cost advantages of a low-pressure, high-temperature coolant, also shared by liquid metal cooled reactors. Notably, there is no steam in the core to cause an explosion, and no large, expensive steel pressure vessel. Since it can operate at high temperatures, the conversion of the heat to electricity can also use an efficient, lightweight Brayton cycle gas turbine.

Much of the current research on FHRs is focused on small compact heat exchangers. By using smaller heat exchangers, less molten salt needs to be used and therefore significant cost savings could be achieved.[35]

Molten salts can be highly corrosive, more so as temperatures rise. For the primary cooling loop of the MSR, a material is needed that can withstand corrosion at high temperatures and intense radiation. Experiments show that Hastelloy-N and similar alloys are quite suited to the tasks at operating temperatures up to about 700 °C. However, long-term experience with a production scale reactor has yet to be gained. In spite of serious engineering difficulties higher operating temperatures may be desirable - at 850 °C thermochemical production of hydrogen becomes possible. Materials for this temperature range have not been validated, though carbon composites, molybdenum alloys (e.g. TZM), carbides, and refractory metal based or ODS alloys might be feasible.

Fused salt selection

Molten FLiBe

The salt mixtures are chosen to make the reactor safer and more practical. Fluoride salts are favored, because fluorine has only one stable isotope (F-19), and it does not easily become radioactive under neutron bombardment. Both of these make fluorine better than chlorine, which has two stable isotopes (Cl-35 and Cl-37), as well as a slow-decaying isotope between them which facilitates neutron absorption by Cl-35. Compared to chlorine and other halides, fluorine also absorbs fewer neutrons and slows ("moderates") neutrons better. Low-valence fluorides boil at high temperatures, though many pentafluorides and hexafluorides boil at low temperatures. They also must be very hot before they break down into their simpler components, such molten salts are "chemically stable" when maintained well below their boiling points.

On the other hand, some salts are so useful that isotope separation of the halide is worthwhile. Chlorides permit fast breeder reactors to be constructed using molten salts. However, not nearly as much work has been done on reactor designs using chloride salts. Chlorine, unlike fluorine, must be purified to isolate the heavier stable isotope, chlorine-37, thus reducing production of sulfur tetrafluoride that occurs when chlorine-35 absorbs a neutron to become chlorine-36, then degrades by beta decay to sulfur-36. Similarly, any lithium present in a salt mixture must be in the form of purified lithium-7 to reduce tritium production by lithium-6 (the tritium then forms corrosive hydrogen fluoride).

Reactor salts are usually close to eutectic mixtures to reduce their melting point. A low melting point simplifies melting the salt at startup and reduces the risk of the salt freezing as it's cooled in the heat exchanger.

Due to the high "redox window" of fused fluoride salts, the chemical potential of the fused salt system can be changed. Fluorine-Lithium-Beryllium ("FLiBe") can be used with beryllium additions to lower the electrochemical potential and almost eliminate corrosion. However, since beryllium is extremely toxic, special precautions must be engineered into the design to prevent its release into the environment. Many other salts can cause plumbing corrosion, especially if the reactor is hot enough to make highly reactive hydrogen.

To date, most research has focused on FLiBe, because lithium and beryllium are reasonably effective moderators, and form a eutectic salt mixture with a lower melting point than each of the constituent salts. Beryllium also performs neutron doubling, improving the neutron economy. This process occurs when the Beryllium nucleus re-emits two neutrons after absorbing a single neutron. For the fuel carrying salts, generally 1% or 2% (by mole) of UF4 is added. Thorium and plutonium fluorides have also been used.

Comparison of the neutron capture and moderating efficiency of several materials. Red are Be-bearing, blue are ZrF4-bearing and green are LiF-bearing salts.[36]
Material Total neutron capture
relative to graphite
(per unit volume)
Moderating ratio
(Avg. 0.1 to 10 eV)
Heavy water 0.2 11449
Light water 75 246
Graphite 1 863
Sodium 47 2
UCO 285 2
UO2 3583 0.1
2LiF–BeF2 8 60
LiF–BeF2–ZrF4 (64.5–30.5–5) 8 54
NaF–BeF2 (57–43) 28 15
LiF–NaF–BeF2 (31–31–38) 20 22
LiF–ZrF4 (51–49) 9 29
NaF–ZrF4 (59.5–40.5) 24 10
LiF-NaF–ZrF4 (26–37–37) 20 13
KF–ZrF4 (58–42) 67 3
RbF–ZrF4 (58–42) 14 13
LiF–KF (50–50) 97 2
LiF–RbF (44–56) 19 9
LiF–NaF–KF (46.5–11.5–42) 90 2
LiF–NaF–RbF (42–6–52) 20 8

Fused salt purification

Techniques for preparing and handling molten salt had been first developed at Oak Ridge National Lab.[37] The purpose of salt purification was to eliminate oxides, Sulfur, and metal impurities. Oxides could result in the deposition of solid particles in reactor operation. Sulfur had to be removed because of their corrosive attack on nickel-base alloys at operational temperature. Structural metal such as Chromium, Nickel, and Iron had to be removed for corrosion control.

A water content reduction purification stage using HF and Helium sweep gas was specified to run at 400 °C. Oxide and Sulfur contamination in the salt mixtures were removed using gas sparging of HF - H2 mixture, with the salt heated to 600 °C.[37](p8) Structural metal contamination in the salt mixtures were removed using Hydrogen gas sparging, at 700 °C.[37](p26) Solid ammonium hydrofluoride was proposed as a safer alternative for oxide removal.[38]

Fused salt processing

The possibility of online processing can be an advantage of the MSR design. Continuous processing would reduce the inventory of fission products, control corrosion and improve neutron economy by removing fission products with high neutron absorption cross-section, especially xenon. This makes the MSR particularly suited to the neutron-poor thorium fuel cycle. Online fuel processing can introduce risks of fuel processing accidents[39](p15), which can trigger release of radio isotopes.

In some thorium breeding scenarios, the intermediate product protactinium-233 would be removed from the reactor and allowed to decay into highly pure uranium-233, an attractive bomb-making material. More modern designs propose to use a lower specific power or a separate large thorium breeding blanket. This dilutes the protactinium to such an extent that few protactinium atoms absorb a second neutron or, via a (n, 2n) reaction (in which an incident neutron is not absorbed but instead knocks a neutron out of the nucleus), generate uranium-232. Because U-232 has a short half-life and its decay chain contains hard gamma emitters, it makes the isotopic mix of uranium less attractive for bomb-making. This benefit would come with the added expense of a larger fissile inventory or a 2-fluid design with a large quantity of blanket salt.

The necessary fuel salt reprocessing technology has been demonstrated, but only at laboratory scale. A prerequisite to full-scale commercial reactor design is the R&D to engineer an economically competitive fuel salt cleaning system.

Fissile fuel reprocessing issues

Reprocessing refers to the chemical separation of fissionable uranium and plutonium from spent nuclear fuel.[40] The recovery of uranium or plutonium could be subject to the risk of nuclear proliferation. In the United States the regulatory regime has varied dramatically in different administrations.[40]

In the original 1971 Molten Salt Breeder Reactor proposal, uranium reprocessing was scheduled every ten days as part of reactor operation.[41](p181) Subsequently a once-through fueling design was proposed that limited uranium reprocessing to every thirty years at the end of useful salt life.[42](p98) A mixture of uranium-238 was called for to make sure recovered uranium would not be weapons grade. This design is referred to as denatured molten salt reactor.[43] If reprocessing were to be prohibited then the uranium would be disposed with other fission products.

Comparison to ordinary light water reactors

MSRs, especially those with the fuel dissolved in the salt differ considerably from conventional reactors. The pressure can be low and the temperature is much higher. In this respect an MSR is more similar to a liquid metal cooled reactor than a conventional light water cooled reactor. As an additional difference MSRs are often planned as breeding reactor with a closed fuel cycle - as opposed to using a once-through fuel currently used in US nuclear reactors.

The typical safety concepts rely on a negative temperature coefficient of reactivity and a large possible temperature rise to limit reactivity excursions. As an additional method for shutdown a separate, passively cooled container below the reactor is planned. In case of problems and for regular maintenance the fuel is drained from the reactor. This stops the nuclear reaction and gives a second cooling system. Neutron-producing accelerators have even been proposed for some super-safe subcritical experimental designs.[44]

Cost estimates from the 1970s were slightly lower than for conventional light-water reactors.[45]
The temperatures of some proposed designs are high enough to produce process heat for hydrogen production or other chemical reactions. Because of this, they have been included in the GEN-IV roadmap for further study.[46]

Advantages

The molten salt reactor offers many potential advantages compared to current light water reactors:[4]
  • Inherently safe design (safety by passive components and the strong negative temperature coefficient of reactivity of some designs).
  • Operating at a low pressure improves safety and simplifies the design
  • In theory a full recycle system can be much cleaner: the discharge wastes after chemical separation are predominately fission products, most of which have relatively short half lives compared to longer-lived actinide wastes. This can result in a significant reduction in the containment period in a geologic repository (300 years vs. tens of thousands of years).
  • The fuel's liquid phase is adequate for pyroprocessing for separation of fission products. This may have advantages over conventional reprocessing, though much development is still needed.
  • There is no need for fuel rod manufacturing
  • Some designs can "burn" problematic transuranic elements from traditional solid-fuel nuclear reactors.
  • An MSR can react to load changes in less than 60 seconds (unlike "traditional" solid-fuel nuclear power plants that suffer from Xenon poisoning).
  • Molten salt reactors can run at high temperatures, yielding high efficiencies to produce electricity.
  • Some MSRs can offer a high "specific power", that is high power at a low mass. This was demonstrated by the ARE, the aircraft reactor experiment.[2]
  • A possibly good neutron economy makes the MSR attractive for the neutron poor thorium fuel cycle.
  • Lithium containing salts will cause significant tritium production (comparable with heavy water reactors), even if pure 7Li is used. Tritium itself is valuable, but also decays (half-life 12.32 yrs) to helium-3, another valuable product.
  • LWR's (and most other solid-fuel reactors) have no clean "off switch", but once the initial criticality is overcome an MSR is comparatively easy and fast to turn on and off. For example, it is said that the researchers would "turn off the Molten-Salt Reactor Experiment for the weekend". At a minimum, the reactor needs enough energy to re-melt the salt and engage the pumps.

Disadvantages

  • Little development compared to most Gen IV designs - much is unknown.
  • Need to operate an on-site chemical plant to manage core mixture and remove fission products.
  • Likely need for regulatory changes to deal with radically different design features.
  • Corrosion may occur over many decades of reactor operation and could be problematic.[47]
  • Nickel and iron based alloys are prone to embrittlement under high neutron flux.[42](p83)
  • Being a breeder reactor, it may be possible to modify an MSR to produce weapons grade nuclear material.[48]

Neurophilosophy

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Neurophilosophy ...