Search This Blog

Saturday, June 8, 2024

Spitzer Space Telescope

From Wikipedia, the free encyclopedia
 
Spitzer Space Telescope
An artist rendering of the Spitzer Space Telescope.
 
NamesSpace Infrared Telescope Facility

Mission typeInfrared space telescope
OperatorNASA / JPL / Caltech
COSPAR ID2003-038A Edit this at Wikidata
SATCAT no.27871
Websitewww.spitzer.caltech.edu
Mission durationPlanned: 2.5 to 5+ years
Primary mission: 5 years, 8 months, 19 days
Final: 16 years, 5 months, 4 days

Spacecraft properties
ManufacturerLockheed
Ball Aerospace
Launch mass950 kg (2,094 lb)
Dry mass884 kg (1,949 lb)
Payload mass851.5 kg (1,877 lb)
Power427 W

Start of mission
Launch date25 August 2003, 05:35:39 UTC
RocketDelta II 7920H
Launch siteCape Canaveral SLC-17B
Entered service18 December 2003

End of mission
DisposalDeactivated in Earth-trailing orbit
Deactivated30 January 2020

Orbital parameters
Reference systemHeliocentric
RegimeEarth-trailing
Eccentricity0.011
Perihelion altitude1.003 AU
Aphelion altitude1.026 AU
Inclination1.13°
Period373.2 days
Epoch16 March 2017 00:00:00

Main telescope
TypeRitchey–Chrétien
Diameter0.85 m (2.8 ft)
Focal length10.2 m (33 ft)
Wavelengthsinfrared, 3.6–160 μm
← Chandra
 
Infrared observations can see objects hidden in visible light, such as HUDF-JD2, shown. This shows how the Spitzer IRAC camera was able to see beyond the wavelengths of Hubble's instruments.

The Spitzer Space Telescope, formerly the Space Infrared Telescope Facility (SIRTF), is an infrared space telescope launched in 2003, that was deactivated when operations ended on 30 January 2020. Spitzer was the third space telescope dedicated to infrared astronomy, following IRAS (1983) and ISO (1995–1998). It was the first spacecraft to use an Earth-trailing orbit, later used by the Kepler planet-finder.

The planned mission period was to be 2.5 years with a pre-launch expectation that the mission could extend to five or slightly more years until the onboard liquid helium supply was exhausted. This occurred on 15 May 2009. Without liquid helium to cool the telescope to the very low temperatures needed to operate, most of the instruments were no longer usable. However, the two shortest-wavelength modules of the IRAC camera continued to operate with the same sensitivity as before the helium was exhausted, and continued to be used into early 2020 in the Spitzer Warm Mission.

During the warm mission, the two short wavelength channels of IRAC operated at 28.7 K and were predicted to experience little to no degradation at this temperature compared to the nominal mission. The Spitzer data, from both the primary and warm phases, are archived at the Infrared Science Archive (IRSA).

In keeping with NASA tradition, the telescope was renamed after its successful demonstration of operation, on 18 December 2003. Unlike most telescopes that are named by a board of scientists, typically after famous deceased astronomers, the new name for SIRTF was obtained from a contest open to the general public. The contest led to the telescope being named in honor of astronomer Lyman Spitzer, who had promoted the concept of space telescopes in the 1940s. Spitzer wrote a 1946 report for RAND Corporation describing the advantages of an extraterrestrial observatory and how it could be realized with available or upcoming technology. He has been cited for his pioneering contributions to rocketry and astronomy, as well as "his vision and leadership in articulating the advantages and benefits to be realized from the Space Telescope Program."

The US$776 million Spitzer was launched on 25 August 2003 at 05:35:39 UTC from Cape Canaveral SLC-17B aboard a Delta II 7920H rocket. It was placed into a heliocentric (as opposed to a geocentric) orbit trailing and drifting away from Earth's orbit at approximately 0.1 astronomical units per year (an "Earth-trailing" orbit).

The primary mirror is 85 centimeters (33 in) in diameter, f/12, made of beryllium and was cooled to 5.5 K (−268 °C; −450 °F). The satellite contains three instruments that allowed it to perform astronomical imaging and photometry from 3.6 to 160 micrometers, spectroscopy from 5.2 to 38 micrometers, and spectrophotometry from 55 to 95 micrometers.

History

By the early 1970s, astronomers began to consider the possibility of placing an infrared telescope above the obscuring effects of Earth's atmosphere. In 1979, a report from the National Research Council of the National Academy of Sciences, A Strategy for Space Astronomy and Astrophysics for the 1980s, identified a Shuttle Infrared Telescope Facility (SIRTF) as "one of two major astrophysics facilities [to be developed] for Spacelab", a shuttle-borne platform. Anticipating the major results from an upcoming Explorer satellite and from the Shuttle mission, the report also favored the "study and development of ... long-duration spaceflights of infrared telescopes cooled to cryogenic temperatures."

The launch in January 1983 of the Infrared Astronomical Satellite, jointly developed by the United States, the Netherlands, and the United Kingdom, to conduct the first infrared survey of the sky, whetted the appetites of scientists worldwide for follow-up space missions capitalizing on the rapid improvements in infrared detector technology.

Earlier infrared observations had been made by both space-based and ground-based observatories. Ground-based observatories have the drawback that at infrared wavelengths or frequencies, both the Earth's atmosphere and the telescope itself will radiate (glow) brightly. Additionally, the atmosphere is opaque at most infrared wavelengths. This necessitates lengthy exposure times and greatly decreases the ability to detect faint objects. It could be compared to trying to observe the stars in the optical at noon from a telescope built out of light bulbs. Previous space observatories (such as IRAS, the Infrared Astronomical Satellite, and ISO, the Infrared Space Observatory) were launched during the 1980s and 1990s and great advances in astronomical technology have been made since then.

The SIRTF in a Kennedy Space Center clean room.
 
The launch of SIRTF in 2003 aboard the 300th Delta rocket.

Most of the early concepts envisioned repeated flights aboard the NASA Space Shuttle. This approach was developed in an era when the Shuttle program was expected to support weekly flights of up to 30 days duration. A May 1983 NASA proposal described SIRTF as a Shuttle-attached mission, with an evolving scientific instrument payload. Several flights were anticipated with a probable transition into a more extended mode of operation, possibly in association with a future space platform or space station. SIRTF would be a 1-meter class, cryogenically cooled, multi-user facility consisting of a telescope and associated focal plane instruments. It would be launched on the Space Shuttle and remain attached to the Shuttle as a Spacelab payload during astronomical observations, after which it would be returned to Earth for refurbishment prior to re-flight. The first flight was expected to occur about 1990, with the succeeding flights anticipated beginning approximately one year later. However, the Spacelab-2 flight aboard STS-51-F showed that the Shuttle environment was poorly suited to an onboard infrared telescope due to contamination from the relatively "dirty" vacuum associated with the orbiters. By September 1983, NASA was considering the "possibility of a long duration [free-flyer] SIRTF mission".

Spitzer is the only one of the Great Observatories not launched by the Space Shuttle, as was originally intended. However, after the 1986 Challenger disaster, the Shuttle-Centaur upper stage, which would have been required to place it into its final orbit, was abandoned. The mission underwent a series of redesigns during the 1990s, primarily due to budget considerations. This resulted in a much smaller but still fully capable mission that could use the smaller Delta II expendable launch vehicle.

Animation of Spitzer Space Telescope
Around the Earth
 
Around the Sun - Frame rotating with the Earth
   Spitzer Space Telescope  ·   Earth ·   Sun

One of the most important advances of this redesign was an Earth-trailing orbit. Cryogenic satellites that require liquid helium (LHe, T ≈ 4 K) temperatures in near-Earth orbit are typically exposed to a large heat load from Earth, and consequently require large amounts of LHe coolant, which then tends to dominate the total payload mass and limits mission life. Placing the satellite in solar orbit far from Earth allowed innovative passive cooling. The sun shield protected the rest of the spacecraft from the Sun's heat, the far side of the spacecraft was painted black to enhance passive radiation of heat, and the spacecraft bus was thermally isolated from the telescope. All of these design choices combined to drastically reduce the total mass of helium needed, resulting in an overall smaller and lighter payload, resulting in major cost savings, but with a mirror the same diameter as originally designed. This orbit also simplified telescope pointing, but did require the NASA Deep Space Network for communications.

The primary instrument package (telescope and cryogenic chamber) was developed by Ball Aerospace & Technologies, in Boulder, Colorado. The individual instruments were developed jointly by industrial, academic, and government institutions, the principals being Cornell, the University of Arizona, the Smithsonian Astrophysical Observatory, Ball Aerospace, and Goddard Spaceflight Center. The shorter-wavelength infrared detectors were developed by Raytheon in Goleta, California. Raytheon used indium antimonide and a doped silicon detector in the creation of the infrared detectors. These detectors are 100 times more sensitive than what was available at the beginning of the project during the 1980s. The far-infrared detectors (70–160 micrometers) were developed jointly by the University of Arizona and Lawrence Berkeley National Laboratory using gallium-doped germanium. The spacecraft was built by Lockheed Martin. The mission was operated and managed by the Jet Propulsion Laboratory and the Spitzer Science Center, located at IPAC on the Caltech campus in Pasadena, California.

Schematic view of Spitzer:
A Optics : 1 - secondary mirror; 3 - primary mirror; 2 - outer shell;
B Cryostat: 4 - instruments; 10 - helium tank;
C Service module: 5 - service module shield; 6 - star tracker; 7 - batteries; 8 - high-gain antenna; 9 - nitrogen tank;
D Solar panels

Launch and commissioning

Warm mission and end of mission

Spitzer ran out of liquid helium coolant on 15 May 2009, which stopped far-IR observations. Only the IRAC instrument remained in use, and only at the two shorter wavelength bands (3.6 μm and 4.5 μm). The telescope equilibrium temperature was then around 30 K (−243 °C; −406 °F), and IRAC continued to produce valuable images at those wavelengths as the "Spitzer Warm Mission".

Late in the mission, ~2016, Spitzer's distance to Earth and the shape of its orbit meant the spacecraft had to pitch over at an extreme angle to aim its antenna at Earth. The solar panels were not fully illuminated at this angle, and this limited those communications to 2.5 hours due to the battery drain. The telescope was retired on 30 January 2020 when NASA sent a shutdown signal to the telescope from the Goldstone Deep Space Communications Complex (GDSCC) instructing the telescope to go into safe mode. After receiving confirmation that the command was successful, Spitzer Project Manager Joseph Hunt officially declared that the mission had ended.

Instruments

Cryogenic Telescope Assembly (CTA)

Spitzer carries three instruments on board:

Infrared Array Camera (IRAC)
An infrared camera which operated simultaneously on four wavelengths (3.6 μm, 4.5 μm, 5.8 μm and 8 μm). Each module used a 256×256-pixel detector—the short-wavelength pair used indium antimonide technology, the long-wavelength pair used arsenic-doped silicon impurity band conduction technology. The principal investigator was Giovanni Fazio of Center for Astrophysics | Harvard & Smithsonian; the flight hardware was built by NASA Goddard Space Flight Center.
Infrared Spectrograph (IRS)
An infrared spectrometer with four sub-modules which operate at the wavelengths 5.3–14 μm (low resolution), 10–19.5 μm (high resolution), 14–40 μm (low resolution), and 19–37 μm (high resolution). Each module used a 128×128-pixel detector—the short-wavelength pair used arsenic-doped silicon blocked impurity band technology, the long-wavelength pair used antimony-doped silicon blocked impurity band technology. The principal investigator was James R. Houck of Cornell University; the flight hardware was built by Ball Aerospace.
Multiband Imaging Photometer for Spitzer (MIPS)
Three detector arrays in the mid- to far-infrared (128 × 128 pixels at 24 μm, 32 × 32 pixels at 70 μm, 2 × 20 pixels at 160 μm). The 24 μm detector is identical to one of the IRS short-wavelength modules. The 70 μm detector used gallium-doped germanium technology, and the 160 μm detector also used gallium-doped germanium, but with mechanical stress added to each pixel to lower the bandgap and extend sensitivity to this long-wavelength. The principal investigator was George H. Rieke of the University of Arizona; the flight hardware was built by Ball Aerospace.

All three instruments used liquid helium for cooling the sensors. Once the helium was exhausted, only the two shorter wavelengths in IRAC were used in the "warm mission".

A Henize 206 viewed by different instruments in March 2004. The separate IRAC and MIPS images are at right.

Results

While some time on the telescope was reserved for participating institutions and crucial projects, astronomers around the world also had the opportunity to submit proposals for observing time. Prior to launch, there was a proposal call for large, coherent investigations using Spitzer. If the telescope failed early and/or ran out of cryogen very quickly, these so-called Legacy Projects would ensure the best possible science could be obtained quickly in the early months of the mission. As a requirement tied to the funding these Legacy teams received, the teams had to deliver high-level data products back to the Spitzer Science Center (and the NASA/IPAC Infrared Science Archive) for use by the community, again ensuring the rapid scientific return of the mission. The international scientific community quickly realized the value of delivering products for others to use, and even though Legacy projects were no longer explicitly solicited in subsequent proposal calls, teams continued to deliver products to the community. The Spitzer Science Center later reinstated named "Legacy" projects (and later still "Exploration Science" projects) in response to this community-driven effort.

Important targets included forming stars (young stellar objects, or YSOs), planets, and other galaxies. Images are freely available for educational and journalistic purposes.

The Cepheus C & B Regions. – The Spitzer Space Telescope (30 May 2019).
The Spitzer's first light image of IC 1396.

The first released images from Spitzer were designed to show off the abilities of the telescope and showed a glowing stellar nursery, a big swirling, dusty galaxy, a disc of planet-forming debris, and organic material in the distant universe. Since then, many monthly press releases have highlighted Spitzer's capabilities, as the NASA and ESA images do for the Hubble Space Telescope.

As one of its most noteworthy observations, in 2005, Spitzer became one of the first telescopes to directly capture light from exoplanets, namely the "hot Jupiters" HD 209458 b and TrES-1b, although it did not resolve that light into actual images. This was one of the first times the light from extrasolar planets had been directly detected; earlier observations had been indirectly made by drawing conclusions from behaviors of the stars the planets were orbiting. The telescope also discovered in April 2005 that Cohen-kuhi Tau/4 had a planetary disk that was vastly younger and contained less mass than previously theorized, leading to new understandings of how planets are formed.

The Helix Nebula, blue shows infrared light of 3.6 to 4.5 micrometers, green shows infrared light of 5.8 to 8 micrometers, and red shows infrared light of 24 micrometers.

In 2004, it was reported that Spitzer had spotted a faintly glowing body that may be the youngest star ever seen. The telescope was trained on a core of gas and dust known as L1014 which had previously appeared completely dark to ground-based observatories and to ISO (Infrared Space Observatory), a predecessor to Spitzer. The advanced technology of Spitzer revealed a bright red hot spot in the middle of L1014.

Scientists from the University of Texas at Austin, who discovered the object, believe the hot spot to be an example of early star development, with the young star collecting gas and dust from the cloud around it. Early speculation about the hot spot was that it might have been the faint light of another core that lies 10 times further from Earth but along the same line of sight as L1014. Follow-up observation from ground-based near-infrared observatories detected a faint fan-shaped glow in the same location as the object found by Spitzer. That glow is too feeble to have come from the more distant core, leading to the conclusion that the object is located within L1014. (Young et al., 2004)

In 2005, astronomers from the University of Wisconsin at Madison and Whitewater determined, on the basis of 400 hours of observation on the Spitzer Space Telescope, that the Milky Way galaxy has a more substantial bar structure across its core than previously recognized.

An artificial color image of the Double Helix Nebula, thought to be generated at the galactic center by magnetic torsion 1000 times greater than the Sun's.

Also in 2005, astronomers Alexander Kashlinsky and John Mather of NASA's Goddard Space Flight Center reported that one of Spitzer's earliest images may have captured the light of the first stars in the universe. An image of a quasar in the Draco constellation, intended only to help calibrate the telescope, was found to contain an infrared glow after the light of known objects was removed. Kashlinsky and Mather are convinced that the numerous blobs in this glow are the light of stars that formed as early as 100 million years after the Big Bang, redshifted by cosmic expansion.

In March 2006, astronomers reported an 80-light-year long (25 pc) nebula near the center of the Milky Way Galaxy, the Double Helix Nebula, which is, as the name implies, twisted into a double spiral shape. This is thought to be evidence of massive magnetic fields generated by the gas disc orbiting the supermassive black hole at the galaxy's center, 300 light-years (92 pc) from the nebula and 25,000 light-years (7,700 pc) from Earth. This nebula was discovered by Spitzer and published in the magazine Nature on 16 March 2006.

In May 2007, astronomers successfully mapped the atmospheric temperature of HD 189733 b, thus obtaining the first map of some kind of an extrasolar planet.

Starting in September 2006, the telescope participated in a series of surveys called the Gould Belt Survey, observing the Gould's Belt region in multiple wavelengths. The first set of observations by the Spitzer Space Telescope was completed from 21 September 2006 through 27 September. Resulting from these observations, the team of astronomers led by Dr. Robert Gutermuth, of the Center for Astrophysics | Harvard & Smithsonian reported the discovery of Serpens South, a cluster of 50 young stars in the Serpens constellation.

The Andromeda Galaxy imaged by MIPS at 24 micrometers.

Scientists have long wondered how tiny silicate crystals, which need high temperatures to form, have found their way into frozen comets, born in the very cold environment of the Solar System's outer edges. The crystals would have begun as non-crystallized, amorphous silicate particles, part of the mix of gas and dust from which the Solar System developed. This mystery has deepened with the results of the Stardust sample return mission, which captured particles from Comet Wild 2. Many of the Stardust particles were found to have formed at temperatures in excess of 1,000 K.

In May 2009, Spitzer researchers from Germany, Hungary, and the Netherlands found that amorphous silicate appears to have been transformed into crystalline form by an outburst from a star. They detected the infrared signature of forsterite silicate crystals on the disk of dust and gas surrounding the star EX Lupi during one of its frequent flare-ups, or outbursts, seen by Spitzer in April 2008. These crystals were not present in Spitzer's previous observations of the star's disk during one of its quiet periods. These crystals appear to have formed by radiative heating of the dust within 0.5 AU of EX Lupi.

In August 2009, the telescope found evidence of a high-speed collision between two burgeoning planets orbiting a young star.

In October 2009, astronomers Anne J. Verbiscer, Michael F. Skrutskie, and Douglas P. Hamilton published findings of the "Phoebe ring" of Saturn, which was found with the telescope; the ring is a huge, tenuous disc of material extending from 128 to 207 times the radius of Saturn.

GLIMPSE and MIPSGAL surveys

GLIMPSE, the Galactic Legacy Infrared Mid-Plane Survey Extraordinaire, was a series of surveys that spanned 360° of the inner region of the Milky Way galaxy, which provided the first large-scale mapping of the galaxy. It consists of more than 2 million snapshots taken in four separate wavelengths using the Infrared Array Camera. The images were taken over a 10-year period beginning in 2003 when Spitzer launched.

MIPSGAL, a similar survey that complements GLIMPSE, covers 248° of the galactic disk using the 24 and 70 μm channels of the MIPS instrument.

On 3 June 2008, scientists unveiled the largest, most detailed infrared portrait of the Milky Way, created by stitching together more than 800,000 snapshots, at the 212th meeting of the American Astronomical Society in St. Louis, Missouri. This composite survey is now viewable with the GLIMPSE/MIPSGAL Viewer.

2010s

An arrow points to the embryonic star HOPS-68, where scientists believe forsterite crystals are raining down onto the central dust disk.

Spitzer observations, announced in May 2011, indicate that tiny forsterite crystals might be falling down like rain on to the protostar HOPS-68. The discovery of the forsterite crystals in the outer collapsing cloud of the protostar is surprising because the crystals form at lava-like high temperatures, yet they are found in the molecular cloud where the temperatures are about −170 °C (103 K; −274 °F). This led the team of astronomers to speculate that the bipolar outflow from the young star may be transporting the forsterite crystals from near the star's surface to the chilly outer cloud.

In January 2012, it was reported that further analysis of the Spitzer observations of EX Lupi can be understood if the forsterite crystalline dust was moving away from the protostar at a remarkable average speed of 38 kilometres per second (24 mi/s). It would appear that such high speeds can arise only if the dust grains had been ejected by a bipolar outflow close to the star. Such observations are consistent with an astrophysical theory, developed in the early 1990s, where it was suggested that bipolar outflows garden or transform the disks of gas and dust that surround protostars by continually ejecting reprocessed, highly heated material from the inner disk, adjacent to the protostar, to regions of the accretion disk further away from the protostar.

In April 2015, Spitzer and the Optical Gravitational Lensing Experiment were reported as co-discovering one of the most distant planets ever identified: a gas giant about 13,000 light-years (4,000 pc) away from Earth.

An illustration of a brown dwarf combined with a graph of light curves from OGLE-2015-BLG-1319: Ground-based data (grey), Swift (blue), and Spitzer (red).

In June and July 2015, the brown dwarf OGLE-2015-BLG-1319 was discovered using the gravitational microlensing detection method in a joint effort between Swift, Spitzer, and the ground-based Optical Gravitational Lensing Experiment, the first time two space telescopes have observed the same microlensing event. This method was possible because of the large separation between the two spacecraft: Swift is in low-Earth orbit while Spitzer is more than one AU distant in an Earth-trailing heliocentric orbit. This separation provided significantly different perspectives of the brown dwarf, allowing for constraints to be placed on some of the object's physical characteristics.

Reported in March 2016, Spitzer and Hubble were used to discover the most distant-known galaxy, GN-z11. This object was seen as it appeared 13.4 billion years ago.

Spitzer Beyond

On 1 October 2016, Spitzer began its Observation Cycle 13, a 2+12 year extended mission nicknamed Beyond. One of the goals of this extended mission was to help prepare for the James Webb Space Telescope, also an infrared telescope, by identifying candidates for more detailed observations.

Another aspect of the Beyond mission was the engineering challenges of operating Spitzer in its progressing orbital phase. As the spacecraft moved farther from Earth on the same orbital path from the Sun, its antenna had to point at increasingly higher angles to communicate with ground stations; this change in angle imparted more and more solar heating on the vehicle while its solar panels received less sunlight.

Planet hunter

An artist's impression of the TRAPPIST-1 system.

Spitzer was also put to work studying exoplanets thanks to creatively tweaking its hardware. This included doubling its stability by modifying its heating cycle, finding a new use for the "peak-up" camera, and analyzing the sensor at a sub-pixel level. Although in its "warm" mission, the spacecraft's passive cooling system kept the sensors at 29 K (−244 °C; −407 °F). Spitzer used the transit photometry and gravitational microlensing techniques to perform these observations. According to NASA's Sean Carey, "We never even considered using Spitzer for studying exoplanets when it launched. ... It would have seemed ludicrous back then, but now it's an important part of what Spitzer does."

Examples of exoplanets discovered using Spitzer include HD 219134 b in 2015, which was shown to be a rocky planet about 1.5 times as large as Earth in a three-day orbit around its star;[62] and an unnamed planet found using microlensing located about 13,000 light-years (4,000 pc) from Earth.[63]

In September–October 2016, Spitzer was used to discover five of a total of seven known planets around the star TRAPPIST-1, all of which are approximately Earth-sized and likely rocky.[64][65] Three of the discovered planets are located in the habitable zone, which means they are capable of supporting liquid water given sufficient parameters.[66] Using the transit method, Spitzer helped measure the sizes of the seven planets and estimate the mass and density of the inner six. Further observations will help determine if there is liquid water on any of the planets.

Seyfert galaxy

From Wikipedia, the free encyclopedia
https://en.wikipedia.org/wiki/Seyfert_galaxy
The Circinus Galaxy, a Type II Seyfert galaxy

Seyfert galaxies are one of the two largest groups of active galaxies, along with quasar host galaxies. They have quasar-like nuclei (very luminous sources of electromagnetic radiation that are outside of our own galaxy) with very high surface brightnesses whose spectra reveal strong, high-ionisation emission lines, but unlike quasars, their host galaxies are clearly detectable.

Seyfert galaxies account for about 10% of all galaxies and are some of the most intensely studied objects in astronomy, as they are thought to be powered by the same phenomena that occur in quasars, although they are closer and less luminous than quasars. These galaxies have supermassive black holes at their centers which are surrounded by accretion discs of in-falling material. The accretion discs are believed to be the source of the observed ultraviolet radiation. Ultraviolet emission and absorption lines provide the best diagnostics for the composition of the surrounding material.

Seen in visible light, most Seyfert galaxies look like normal spiral galaxies, but when studied under other wavelengths, it becomes clear that the luminosity of their cores is of comparable intensity to the luminosity of whole galaxies the size of the Milky Way.

Seyfert galaxies are named after Carl Seyfert, who first described this class in 1943.

Discovery

NGC 1068 (Messier 77), one of the first Seyfert galaxies classified

Seyfert galaxies were first detected in 1908 by Edward A. Fath and Vesto Slipher, who were using the Lick Observatory to look at the spectra of astronomical objects that were thought to be "spiral nebulae". They noticed that NGC 1068 showed six bright emission lines, which was considered unusual as most objects observed showed an absorption spectrum corresponding to stars.

In 1926, Edwin Hubble looked at the emission lines of NGC 1068 and two other such "nebulae" and classified them as extragalactic objects. In 1943, Carl Keenan Seyfert discovered more galaxies similar to NGC 1068 and reported that these galaxies have very bright stellar-like nuclei that produce broad emission lines. In 1944 Cygnus A was detected at 160 MHz, and detection was confirmed in 1948 when it was established that it was a discrete source. Its double radio structure became apparent with the use of interferometry. In the next few years, other radio sources such as supernova remnants were discovered. By the end of the 1950s, more important characteristics of Seyfert galaxies were discovered, including the fact that their nuclei are extremely compact (< 100 pc, i.e. "unresolved"), have high mass (≈109±1 solar masses), and the duration of peak nuclear emissions is relatively short (> 108 years).

NGC 5793 is a Seyfert galaxy located over 150 million light-years away in the constellation of Libra.

In the 1960s and 1970s, research to further understand the properties of Seyfert galaxies was carried out. A few direct measurements of the actual sizes of Seyfert nuclei were taken, and it was established that the emission lines in NGC 1068 were produced in a region over a thousand light years in diameter. Controversy existed over whether Seyfert redshifts were of cosmological origin. Confirming estimates of the distance to Seyfert galaxies and their age were limited since their nuclei vary in brightness over a time scale of a few years; therefore arguments involving distance to such galaxies and the constant speed of light cannot always be used to determine their age. In the same time period, research had been undertaken to survey, identify and catalogue galaxies, including Seyferts. Beginning in 1967, Benjamin Markarian published lists containing a few hundred galaxies distinguished by their very strong ultraviolet emission, with measurements on the position of some of them being improved in 1973 by other researchers. At the time, it was believed that 1% of spiral galaxies are Seyferts. By 1977, it was found that very few Seyfert galaxies are ellipticals, most of them being spiral or barred spiral galaxies. During the same time period, efforts have been made to gather spectrophotometric data for Seyfert galaxies. It became obvious that not all spectra from Seyfert galaxies look the same, so they have been subclassified according to the characteristics of their emission spectra. A simple division into types I and II has been devised, with the classes depending on the relative width of their emission lines. It has been later noticed that some Seyfert nuclei show intermediate properties, resulting in their being further subclassified into types 1.2, 1.5, 1.8 and 1.9 (see Classification). Early surveys for Seyfert galaxies were biased in counting only the brightest representatives of this group. More recent surveys that count galaxies with low-luminosity and obscured Seyfert nuclei suggest that the Seyfert phenomenon is actually quite common, occurring in 16% ± 5% of galaxies; indeed, several dozen galaxies exhibiting the Seyfert phenomenon exist in the close vicinity (≈27 Mpc) of our own galaxy. Seyfert galaxies form a substantial fraction of the galaxies appearing in the Markarian catalog, a list of galaxies displaying an ultraviolet excess in their nuclei.

Characteristics

Optical and ultraviolet images of the black hole in the center of NGC 4151, a Seyfert galaxy

An active galactic nucleus (AGN) is a compact region at the center of a galaxy that has a higher than normal luminosity over portions of the electromagnetic spectrum. A galaxy having an active nucleus is called an active galaxy. Active galactic nuclei are the most luminous sources of electromagnetic radiation in the Universe, and their evolution puts constraints on cosmological models. Depending on the type, their luminosity varies over a timescale from a few hours to a few years. The two largest subclasses of active galaxies are quasars and Seyfert galaxies, the main difference between the two being the amount of radiation they emit. In a typical Seyfert galaxy, the nuclear source emits at visible wavelengths an amount of radiation comparable to that of the whole galaxy's constituent stars, while in a quasar, the nuclear source is brighter than the constituent stars by at least a factor of 100. Seyfert galaxies have extremely bright nuclei, with luminosities ranging between 108 and 1011 solar luminosities. Only about 5% of them are radio bright; their emissions are moderate in gamma rays and bright in X-rays. Their visible and infrared spectra show very bright emission lines of hydrogen, helium, nitrogen, and oxygen. These emission lines exhibit strong Doppler broadening, which implies velocities from 500 to 4,000 km/s (310 to 2,490 mi/s), and are believed to originate near an accretion disc surrounding the central black hole.

Eddington luminosity

Active galaxy Markarian 1018 has a supermassive black hole at its core.

A lower limit to the mass of the central black hole can be calculated using the Eddington luminosity. This limit arises because light exhibits radiation pressure. Assume that a black hole is surrounded by a disc of luminous gas. Both the attractive gravitational force acting on electron-ion pairs in the disc and the repulsive force exerted by radiation pressure follow an inverse-square law. If the gravitational force exerted by the black hole is less than the repulsive force due to radiation pressure, the disc will be blown away by radiation pressure.

A model of an active galactic nucleus. The central black hole is surrounded by an accretion disc, which is surrounded by a torus. The broad line region and narrow line emission region are shown, as well as jets coming out of the nucleus.

Emissions

The emission lines seen on the spectrum of a Seyfert galaxy may come from the surface of the accretion disc itself, or may come from clouds of gas illuminated by the central engine in an ionization cone. The exact geometry of the emitting region is difficult to determine due to poor resolution of the galactic center. However, each part of the accretion disc has a different velocity relative to our line of sight, and the faster the gas is rotating around the black hole, the broader the emission line will be. Similarly, an illuminated disc wind also has a position-dependent velocity.

The narrow lines are believed to originate from the outer part of the active galactic nucleus, where velocities are lower, while the broad lines originate closer to the black hole. This is confirmed by the fact that the narrow lines do not vary detectably, which implies that the emitting region is large, contrary to the broad lines which can vary on relatively short timescales. Reverberation mapping is a technique which uses this variability to try to determine the location and morphology of the emitting region. This technique measures the structure and kinematics of the broad line emitting region by observing the changes in the emitted lines as a response to changes in the continuum. The use of reverberation mapping requires the assumption that the continuum originates in a single central source. For 35 AGN, reverberation mapping has been used to calculate the mass of the central black holes and the size of the broad line regions.

In the few radio-loud Seyfert galaxies that have been observed, the radio emission is believed to represent synchrotron emission from the jet. The infrared emission is due to radiation in other bands being reprocessed by dust near the nucleus. The highest energy photons are believed to be created by inverse Compton scattering by a high temperature corona near the black hole.

Classification

NGC 1097 is an example of a Seyfert galaxy. A supermassive black hole with a mass of 100 million solar masses lies at the center of the galaxy. The area around the black hole emits large amounts of radiation from the matter falling into the black hole.

Seyferts were first classified as Type I or II, depending on the emission lines shown by their spectra. The spectra of Type I Seyfert galaxies show broad lines that include both allowed lines, like H I, He I or He II and narrower forbidden lines, like O III. They show some narrower allowed lines as well, but even these narrow lines are much broader than the lines shown by normal galaxies. However, the spectra of Type II Seyfert galaxies show only narrow lines, both permitted and forbidden. Forbidden lines are spectral lines that occur due to electron transitions not normally allowed by the selection rules of quantum mechanics, but that still have a small probability of spontaneously occurring. The term "forbidden" is slightly misleading, as the electron transitions causing them are not forbidden but highly improbable.

NGC 6300 is a Type II galaxy in the southern constellation of Ara.

In some cases, the spectra show both broad and narrow permitted lines, which is why they are classified as an intermediate type between Type I and Type II, such as Type 1.5 Seyfert. The spectra of some of these galaxies have changed from Type 1.5 to Type II in a matter of a few years. However, the characteristic broad emission line has rarely, if ever, disappeared. The origin of the differences between Type I and Type II Seyfert galaxies is not known yet. There are a few cases where galaxies have been identified as Type II only because the broad components of the spectral lines have been very hard to detect. It is believed by some that all Type II Seyferts are in fact Type I, where the broad components of the lines are impossible to detect because of the angle we are at with respect to the galaxy. Specifically, in Type I Seyfert galaxies, we observe the central compact source more or less directly, therefore sampling the high velocity clouds in the broad line emission region moving around the supermassive black hole thought to be at the center of the galaxy. By contrast, in Type II Seyfert galaxies, the active nuclei are obscured and only the colder outer regions located further away from the clouds' broad line emission region are seen. This theory is known as the "Unification scheme" of Seyfert galaxies. However, it is not yet clear if this hypothesis can explain all the observed differences between the two types.

Type I Seyfert galaxies

NGC 6814 is a Seyfert galaxy with a highly variable source of X-ray radiation.

Type I Seyferts are very bright sources of ultraviolet light and X-rays in addition to the visible light coming from their cores. They have two sets of emission lines on their spectra: narrow lines with widths (measured in velocity units) of several hundred km/s, and broad lines with widths up to 104 km/s. The broad lines originate above the accretion disc of the supermassive black hole thought to power the galaxy, while the narrow lines occur beyond the broad line region of the accretion disc. Both emissions are caused by heavily ionised gas. The broad line emission arises in a region 0.1–1 parsec across. The broad line emission region, RBLR, can be estimated from the time delay corresponding to the time taken by light to travel from the continuum source to the line-emitting gas.

Type II Seyfert galaxies

NGC 3081 is known as a Type II Seyfert galaxy, characterised by its dazzling nucleus.

Type II Seyfert galaxies have the characteristic bright core, as well as appearing bright when viewed at infrared wavelengths. Their spectra contain narrow lines associated with forbidden transitions, and broader lines associated with allowed strong dipole or intercombination transitions. NGC 3147 is considered the best candidate to be a true Type II Seyfert galaxy. In some Type II Seyfert galaxies, analysis with a technique called spectro-polarimetry (spectroscopy of polarised light component) revealed obscured Type I regions. In the case of NGC 1068, nuclear light reflected off a dust cloud was measured, which led scientists to believe in the presence of an obscuring dust torus around a bright continuum and broad emission line nucleus. When the galaxy is viewed from the side, the nucleus is indirectly observed through reflection by gas and dust above and below the torus. This reflection causes the polarisation.

Type 1.2, 1.5, 1.8 and 1.9 Seyfert galaxies

NGC 1275, a Type 1.5 Seyfert galaxy

In 1981, Donald Osterbrock introduced the notations Type 1.5, 1.8 and 1.9, where the subclasses are based on the optical appearance of the spectrum, with the numerically larger subclasses having weaker broad-line components relative to the narrow lines. For example, Type 1.9 only shows a broad component in the line, and not in higher order Balmer lines. In Type 1.8, very weak broad lines can be detected in the lines as well as Hα, even if they are very weak compared to the Hα. In Type 1.5, the strength of the Hα and Hβ lines are comparable.

Other Seyfert-like galaxies

Messier 94, a galaxy with a Seyfert-like LINER nucleus

In addition to the Seyfert progression from Type I to Type II (including Type 1.2 to Type 1.9), there are other types of galaxies that are very similar to Seyferts or that can be considered as subclasses of them. Very similar to Seyferts are the low-ionisation narrow-line emission radio galaxies (LINER), discovered in 1980. These galaxies have strong emission lines from weakly ionised or neutral atoms, while the emission lines from strongly ionised atoms are relatively weak by comparison. LINERs share a large amount of traits with low luminosity Seyferts. In fact, when seen in visible light, the global characteristics of their host galaxies are indistinguishable. Also, they both show a broad line emission region, but the line emitting region in LINERs has a lower density than in Seyferts. An example of such a galaxy is M104 in the Virgo constellation, also known as the Sombrero Galaxy. A galaxy that is both a LINER and a Type I Seyfert is NGC 7213, a galaxy that is relatively close compared to other AGNs. Another very interesting subclass are the narrow line Type I galaxies (NLSy1), which have been subject to extensive research in recent years. They have much narrower lines than the broad lines from classic Type I galaxies, steep hard and soft X-ray spectra and strong Fe[II] emission. Their properties suggest that NLSy1 galaxies are young AGNs with high accretion rates, suggesting a relatively small but growing central black hole mass. There are theories suggesting that NLSy1s are galaxies in an early stage of evolution, and links between them and ultraluminous infrared galaxies or Type II galaxies have been proposed.

Evolution

The majority of active galaxies are very distant and show large Doppler shifts. This suggests that active galaxies occurred in the early Universe and, due to cosmic expansion, are receding away from the Milky Way at very high speeds. Quasars are the furthest active galaxies, some of them being observed at distances 12 billion light years away. Seyfert galaxies are much closer than quasars. Because light has a finite speed, looking across large distances in the Universe is equivalent to looking back in time. Therefore, the observation of active galactic nuclei at large distances and their scarcity in the nearby Universe suggests that they were much more common in the early Universe, implying that active galactic nuclei could be early stages of galactic evolution. This leads to the question about what would be the local (modern-day) counterparts of AGNs found at large redshifts. It has been proposed that NLSy1s could be the small redshift counterparts of quasars found at large redshifts (z > 4). The two have many similar properties, for example: high metallicities or similar pattern of emission lines (strong Fe [II], weak O [III]). Some observations suggest that AGN emission from the nucleus is not spherically symmetric and that the nucleus often shows axial symmetry, with radiation escaping in a conical region. Based on these observations, models have been devised to explain the different classes of AGNs as due to their different orientations with respect to the observational line of sight. Such models are called unified models. Unified models explain the difference between Type I and Type II galaxies as being the result of Type II galaxies being surrounded by obscuring toruses which prevent telescopes from seeing the broad line region. Quasars and blazars can be fit quite easily in this model. The main problem of such a unification scheme is trying to explain why some AGN are radio loud while others are radio quiet. It has been suggested that these differences may be due to differences in the spin of the central black hole.

Sticky bead argument

From Wikipedia, the free encyclopedia

In general relativity, the sticky bead argument is a simple thought experiment designed to show that gravitational radiation is indeed predicted by general relativity, and can have physical effects. These claims were not widely accepted prior to about 1955, but after the introduction of the bead argument, any remaining doubts soon disappeared from the research literature.

The argument is often credited to Hermann Bondi, who popularized it, but it was originally proposed by Richard Feynman.

Description

The thought experiment was first described by Feynman in 1957 at a conference at Chapel Hill, North Carolina, and later addressed in his private letter to Victor Weisskopf:

Feynman’s gravitational wave detector: It is simply two beads sliding freely (but with a small amount of friction) on a rigid rod. As the wave passes over the rod, atomic forces hold the length of the rod fixed, but the proper distance between the two beads oscillates. Thus, the beads rub against the rod, dissipating heat.

As the gravitational waves are mainly transverse, the rod has to be oriented perpendicular to the propagation direction of the wave.

History of arguments on the properties of gravitational waves

Einstein's double reversal

The creator of the theory of general relativity, Albert Einstein, argued in 1916 that gravitational radiation should be produced, according to his theory, by any mass-energy configuration that has a time-varying quadrupole moment (or higher multipole moment). Using a linearized field equation (appropriate for the study of weak gravitational fields), he derived the famous quadrupole formula quantifying the rate at which such radiation should carry away energy. Examples of systems with time varying quadrupole moments include vibrating strings, bars rotating about an axis perpendicular to the symmetry axis of the bar, and binary star systems, but not rotating disks.

In 1922, Arthur Stanley Eddington wrote a paper expressing (apparently for the first time) the view that gravitational waves are in essence ripples in coordinates, and have no physical meaning. He did not appreciate Einstein's arguments that the waves are real.

In 1936, together with Nathan Rosen, Einstein rediscovered the Beck vacuums, a family of exact gravitational wave solutions with cylindrical symmetry (sometimes also called Einstein–Rosen waves). While investigating the motion of test particles in these solutions, Einstein and Rosen became convinced that gravitational waves were unstable to collapse. Einstein reversed himself and declared that gravitational radiation was not after all a prediction of his theory. Einstein wrote to his friend Max Born

Together with a young collaborator, I arrived at the interesting result that gravitational waves do not exist, though they had been assumed a certainty to the first approximation. This shows that the nonlinear field equations can show us more, or rather limit us more, than we have believed up till now.

In other words, Einstein believed that he and Rosen had established that their new argument showed that the prediction of gravitational radiation was a mathematical artifact of the linear approximation he had employed in 1916. Einstein believed these plane waves would gravitationally collapse into points; he had long hoped something like this would explain quantum mechanical wave-particle duality.

Einstein and Rosen accordingly submitted a paper entitled Do gravitational waves exist? to a leading physics journal, Physical Review, in which they described their wave solutions and concluded that the "radiation" that seemed to appear in general relativity was not genuine radiation capable of transporting energy or having (in principle) measurable physical effects. The anonymous referee, who—as the current editor of Physical Review recently confirmed, all parties now being deceased—was the combative cosmologist, Howard Percy Robertson, pointed out the error described below, and the manuscript was returned to the authors with a note from the editor asking them to revise the paper to address these concerns. Quite uncharacteristically, Einstein took this criticism very badly, angrily replying "I see no reason to address the, in any case erroneous, opinion expressed by your referee." He vowed never again to submit a paper to Physical Review. Instead, Einstein and Rosen resubmitted the paper without change to another and much less well known journal, The Journal of the Franklin Institute. He kept his vow regarding Physical Review.

Leopold Infeld, who arrived at Princeton University at this time, later remembered his utter astonishment on hearing of this development, since radiation is such an essential element for any classical field theory worthy of the name. Infeld expressed his doubts to a leading expert on general relativity: H. P. Robertson, who had just returned from a visit to Caltech. Going over the argument as Infeld remembered it, Robertson was able to show Infeld the mistake: locally, the Einstein–Rosen waves are gravitational plane waves. Einstein and Rosen had correctly shown that a cloud of test particles would, in sinusoidal plane waves, form caustics, but changing to another chart (essentially the Brinkmann coordinates) shows that the formation of the caustic is not a contradiction at all, but in fact just what one would expect in this situation. Infeld then approached Einstein, who concurred with Robertson's analysis (still not knowing it was he who reviewed the Physical Review submission).

Since Rosen had recently departed for the Soviet Union, Einstein acted alone in promptly and thoroughly revising their joint paper. This third version was retitled On gravitational waves, and, following Robertson's suggestion of a transformation to cylindrical coordinates, presented what are now called Einstein–Rosen cylindrical waves (these are locally isometric to plane waves). This is the version that eventually appeared. However, Rosen was unhappy with this revision and eventually published his own version, which retained the erroneous "disproof" of the prediction of gravitational radiation.

In a letter to the editor of Physical Review, Robertson wryly reported that in the end, Einstein had fully accepted the objections that had initially so upset him.

Bern and Chapel Hill conferences

In 1955, an important conference honoring the semi-centennial of special relativity was held in Bern, the Swiss capital city where Einstein was working in the famous patent office during the Annus mirabilis. Rosen attended and gave a talk in which he computed the Einstein pseudotensor and Landau–Lifshitz pseudotensor (two alternative, non-covariant, descriptions of the energy carried by a gravitational field, a notion that is notoriously difficult to pin down in general relativity). These turn out to be zero for the Einstein–Rosen waves, and Rosen argued that this reaffirmed the negative conclusion he had reached with Einstein in 1936.

However, by this time a few physicists, such as Felix Pirani and Ivor Robinson, had come to appreciate the role played by curvature in producing tidal accelerations, and were able to convince many peers that gravitational radiation would indeed be produced, at least in cases such as a vibrating spring where different pieces of the system were clearly not in inertial motion. Nonetheless, some physicists continued to doubt whether radiation would be produced by a binary star system, where the world lines of the centers of mass of the two stars should, according to the EIH approximation (dating from 1938 and due to Einstein, Infeld, and Banesh Hoffmann), follow timelike geodesics.

Inspired by conversations by Felix Pirani, Hermann Bondi took up the study of gravitational radiation, in particular the question of quantifying the energy and momentum carried off 'to infinity' by a radiating system. During the next few years, Bondi developed the Bondi radiating chart and the notion of Bondi energy to rigorously study this question in maximal generality.

In 1957, at a conference at Chapel Hill, North Carolina, appealing to various mathematical tools developed by John Lighton Synge, A. Z. Petrov and André Lichnerowicz, Pirani explained more clearly than had previously been possible the central role played by the Riemann tensor and in particular the tidal tensor in general relativity. He gave the first correct description of the relative (tidal) acceleration of initially mutually static test particles that encounter a sinusoidal gravitational plane wave.

Feynman's argument

Later in the Chapel Hill conference, Richard Feynman used Pirani's description to point out that a passing gravitational wave should in principle cause a bead on a stick (oriented transversely to the direction of propagation of the wave) to slide back and forth, thus heating the bead and the stick by friction. This heating, said Feynman, showed that the wave did indeed impart energy to the bead and stick system, so it must indeed transport energy, contrary to the view expressed in 1955 by Rosen.

In two 1957 papers, Bondi and (separately) Joseph Weber and John Archibald Wheeler used this bead argument to present detailed refutations of Rosen's argument.

Rosen's final views

Nathan Rosen continued to argue as late as the 1970s, on the basis of a supposed paradox involving the radiation reaction, that gravitational radiation is not in fact predicted by general relativity. His arguments were generally regarded as invalid, but in any case the sticky bead argument had by then long since convinced other physicists of the reality of the prediction of gravitational radiation.

Natural aristocracy

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Natural_aristocracy ...