| Polytetrafluoroethylene |
|---|
 |
 |
poly(1,1,2,2-tetrafluoroethylene) [1]
|
Syncolon, Fluon, Poly(tetrafluoroethene), Poly(difluoromethylene), Poly(tetrafluoroethylene)
|
| Identifiers |
|---|
| Abbreviations | PTFE |
| CAS number | 9002-84-0  Y |
| KEGG | D08974  N= |
| ChEBI | CHEBI:53251 N |
| Properties |
|---|
| Molecular formula | (C2F4)n |
| Density | 2200 kg/m3 |
| Melting point | 600 K |
| Thermal conductivity | 0.25 W/(m·K) |
| Hazards |
|---|
| MSDS | External MSDS |
| NFPA 704 |
|
| Supplementary data page |
|---|
Structure and
properties | n, εr, etc. |
Thermodynamic
data | Phase behaviour
Solid, liquid, gas |
| Spectral data | UV, IR, NMR, MS |
| Except where noted otherwise, data are given for materials in their standard state (at 25 °C (77 °F), 100 kPa) |
 N (verify) (what is:  Y/ N?) |
| Infobox references |
| |
Polytetrafluoroethylene (
PTFE) is a synthetic
fluoropolymer of
tetrafluoroethylene that has numerous applications. The best known brand name of PTFE-based formulas is
Teflon by
DuPont Co., who discovered the compound.
PTFE is a
fluorocarbon solid, as it is a high-
molecular-weight compound consisting wholly of
carbon and
fluorine. PTFE is
hydrophobic: neither water nor water-containing substances wet PTFE, as fluorocarbons demonstrate mitigated
London dispersion forces due to the high
electronegativity of fluorine. PTFE has one of the lowest coefficients of
friction against any solid.
PTFE is used as a
non-stick coating for pans and other
cookware. It is very non-reactive, partly because of the strength of
carbon–fluorine bonds and so it is often used in containers and pipework for reactive and corrosive chemicals. Where used as a
lubricant, PTFE reduces friction, wear and energy consumption of machinery. It is also commonly used as a graft material in surgical interventions.
History
PTFE was accidentally discovered in 1938 by
Roy Plunkett while he was working in New Jersey for
Kinetic Chemicals. As Plunkett attempted to make a new
chlorofluorocarbon refrigerant, the
tetrafluoroethylene gas in its pressure bottle stopped flowing before the bottle's weight had dropped to the point signaling "empty." Since Plunkett was measuring the amount of gas used by weighing the bottle, he became curious as to the source of the weight, and finally resorted to sawing the bottle apart. He found the bottle's interior coated with a waxy white material that was oddly slippery.
Analysis showed that it was polymerized perfluoroethylene, with the iron from the inside of the container having acted as a catalyst at high pressure. Kinetic Chemicals patented the new fluorinated plastic (analogous to the already known
polyethylene) in 1941,
[2] and registered the Teflon trademark in 1945.
[3][4]
By 1948, DuPont, which founded Kinetic Chemicals in partnership with
General Motors, was producing over two million pounds (900 tons) of Teflon brand PTFE per year in
Parkersburg, West Virginia.
[5] An early use was in the
Manhattan Project as a material to coat valves and seals in the pipes holding highly reactive
uranium hexafluoride at the vast
K-25 uranium enrichment plant in
Oak Ridge, Tennessee.
[6]
In 1954, the wife of French engineer Marc Grégoire urged him to try the material he had been using on fishing tackle on her cooking pans. He subsequently created the first Teflon-coated, non-stick pans under the brandname
Tefal (combining "Tef" from "Teflon" and "al" from aluminum).
[7] In the United States,
Marion A. Trozzolo, who had been using the substance on scientific utensils, marketed the first US-made Teflon-coated pan, "The Happy Pan", in 1961.
[8]
However, Tefal was not the only company to utilize PTFE in nonstick cookware coatings. In subsequent years, many cookware manufacturers developed proprietary PTFE-based formulas, including
Swiss Diamond International which uses a diamond-reinforced PTFE formula ,
[9] Scanpan which uses a titanium-reinforced PTFE formula,
[10] Cuisinart's Chef's Classic and Advantage nonstick collections
[11] and
All-Clad[12] and
Newell Rubbermaid's Calphalon which use a non-reinforced PTFE-based nonstick.
[13] Other cookware companies, such as
Meyer Corporation's Anolon, use
Teflon[14] nonstick coatings purchased from
DuPont.
In the 1990s, it was found that PTFE could be radiation
cross-linked above its melting point in an oxygen-free environment.
[15] Electron beam processing is one example of radiation processing. Cross-linked PTFE has improved high-temperature mechanical properties and radiation stability. This was significant because, for many years, irradiation at ambient conditions had been used to break down PTFE for recycling.
[16] The radiation-induced chain scissioning allows it to be more easily reground and reused.
Production
PTFE is produced by
free-radical polymerization of tetrafluoroethylene. The net equation is:
- n F2C=CF2 → 1/n —{ F2C—CF2}n—
Because tetrafluoroethylene can explosively decompose to tetrafluoromethane and carbon, special apparatus is required for the polymerization to prevent hot spots that might initiate this dangerous side reaction. The process is typically initiated with
persulfate, which homolyzes to generate sulfate radicals:
- [O3SO-OSO3]2−⇌ 2 SO4•−
The resulting polymer is terminated with
sulfate ester groups, which can be hydrolyzed to give OH-
end-groups.
[17]
Because PTFE is poorly soluble in almost all solvents, the polymerization is conducted as an emulsion in water. This process gives a suspension of polymer particles. Alternatively, the polymerization is conducted using a surfactant such as
PFOS.
Properties
PTFE is a
thermoplastic polymer, which is a white solid at room temperature, with a density of about 2200 kg/m
3. According to DuPont, its melting point is 600 K (327 °C; 620 °F).
[18] It maintains high strength, toughness and self-lubrication at low temperatures down to 5 K (−268.15 °C; −450.67 °F), and good flexibility at temperatures above 194 K (−79 °C; −110 °F).
[19] PTFE gains its properties from the aggregate effect of
carbon-fluorine bonds, as do all fluorocarbons. The only chemicals known to affect these carbon-fluorine bonds are certain
alkali metals and fluorinating agents such as
xenon difluoride and
cobalt(III) fluoride.
[20]
The
coefficient of friction of plastics is usually measured against polished steel.
[24] PTFE's coefficient of friction is 0.05 to 0.10,
[18] which is the third-lowest of any known solid material (
BAM being the first, with a coefficient of friction of 0.02;
diamond-like carbon being second-lowest at 0.05). PTFE's resistance to
van der Waals forces means that it is the only known surface to which a
gecko cannot stick.
[25] In fact, PTFE can be used to prevent insects climbing up surfaces painted with the material. PTFE is so slippery that insects cannot get a grip and tend to fall off. For example, PTFE is used to prevent ants climbing out of
formicaria.
Because of its chemical inertness, PTFE cannot be
cross-linked like an
elastomer. Therefore, it has no "memory" and is subject to
creep. Because of its superior chemical and thermal properties, PTFE is often used as a gasket material. However, because of the propensity to creep, the long-term performance of such seals is worse than for elastomers which exhibit zero, or near-zero, levels of creep. In critical applications, Belleville washers are often used to apply continuous force to PTFE gaskets, ensuring a minimal loss of performance over the lifetime of the gasket.
[26]
Applications and uses
The major application of PTFE, consuming about 50% of production, is for wiring in aerospace and computer applications (e.g. hookup wire, coaxial cables). This application exploits the fact that PTFE has excellent
dielectric properties. This is especially true at high
radio frequencies, making it suitable for use as an
insulator in
cables and
connector assemblies and as a material for
printed circuit boards used at
microwave frequencies. Combined with its high melting temperature, this makes it the material of choice as a high-performance substitute for the weaker and lower-melting-point
polyethylene commonly used in low-cost applications.
Another major application is in fuel and hydraulic lines, due to PTFE's low resistance against flowing liquids. Colder temperatures at high altitudes cause these fluids to flow more slowly. Coating the lines's interior surfaces with low-resistance PTFE helps to compensate by allowing the liquids to move more easily.
[17]
In industrial applications, owing to its low friction, PTFE is used for applications where sliding action of parts is needed:
plain bearings,
gears,
slide plates, etc. In these applications, it performs significantly better than
nylon and
acetal; it is comparable to
ultra-high-molecular-weight polyethylene (UHMWPE). Although UHMWPE is more resistant to wear than PTFE, for these applications, versions of PTFE with mineral oil or
molybdenum disulfide embedded as additional
lubricants in its matrix are being manufactured. Its extremely high bulk
resistivity makes it an ideal material for fabricating long-life
electrets, useful devices that are the
electrostatic analogues of
magnets.
Gore-Tex is a material incorporating a fluoropolymer membrane with micropores. The roof of the
Hubert H. Humphrey Metrodome in
Minneapolis, USA, is one of the largest applications of PTFE coatings. 20 acres (81,000 m
2) of the material was used in the creation of the white double-layered PTFE-coated fiberglass dome.
Other
PTFE (Teflon) is best known for its use in coating non-stick
frying pans and other cookware, as it is
hydrophobic and possesses fairly high heat resistance.
PTFE tapes with pressure-sensitive adhesive backing
Niche
PTFE is a versatile material that is found in many niche applications:
- It is used as a film interface patch for sports and medical applications, featuring a pressure-sensitive adhesive backing, which is installed in strategic high friction areas of footwear, insoles, ankle-foot orthosis, and other medical devices to prevent and relieve friction-induced blisters, calluses and foot ulceration.
- Powdered PTFE is used in pyrotechnic compositions as an oxidizer with powdered metals such as aluminium and magnesium. Upon ignition, these mixtures form carbonaceous soot and the corresponding metal fluoride, and release large amounts of heat. They are used in infrared decoy flares and as igniters for solid-fuel rocket propellants.[27]
- In optical radiometry, sheets of PTFE are used as measuring heads in spectroradiometers and broadband radiometers (e.g., illuminance meters and UV radiometers) due to PTFE's capability to diffuse a transmitting light nearly perfectly. Moreover, optical properties of PTFE stay constant over a wide range of wavelengths, from UV down to near infrared. In this region, the relation of its regular transmittance to diffuse transmittance is negligibly small, so light transmitted through a diffuser (PTFE sheet) radiates like Lambert's cosine law. Thus PTFE enables cosinusoidal angular response for a detector measuring the power of optical radiation at a surface, e.g. in solar irradiance measurements.
- Certain types of hardened, armor-piercing bullets are coated with PTFE to reduce wear on firearms's rifling that harder projectiles would cause. PTFE itself does not give a projectile an armor-piercing property.[28]
- Its high corrosion resistance makes PTFE useful in laboratory environments, where it is used for lining containers, as a coating for magnetic stirrers, and as tubing for highly corrosive chemicals such as hydrofluoric acid, which will dissolve glass containers. It is used in containers for storing fluoroantimonic acid, a superacid.[citation needed]
- PTFE tubes are used in gas-gas heat exchangers in gas cleaning of waste incinerators. Unit power capacity is typically several megawatts.
- PTFE is also widely used as a thread seal tape in plumbing applications, largely replacing paste thread dope.
- PTFE membrane filters are among the most efficient industrial air filters. PTFE-coated filters are often used in dust collection systems to collect particulate matter from air streams in applications involving high temperatures and high particulate loads such as coal-fired power plants, cement production and steel foundries.
- PTFE grafts can be used to bypass stenotic arteries in peripheral vascular disease if a suitable autologous vein graft is not available.
Safety
The
pyrolysis of PTFE is detectable at 200 °C (392 °F), and it evolves several
fluorocarbon gases and a
sublimate. An animal study conducted in 1955 concluded that it is unlikely that these products would be generated in amounts significant to health at temperatures below 250 °C (482 °F).
[29] More recently, however, a study documented birds having been killed by these decomposition products at 202 °C (396 °F), with unconfirmed reports of bird deaths as a result of non-stick cookware heated to as little as 163 °C (325 °F).
[30]
While PTFE is stable and nontoxic at lower temperatures, it begins to deteriorate after the temperature of cookware reaches about 260 °C (500 °F), and decomposes above 350 °C (662 °F).
[citation needed] These degradation by-products can be lethal to
birds, and can cause
flu-like symptoms in humans.
[citation needed] In May, 2003, the environmental research and advocacy organization
Environmental Working Group filed a 14-page brief with the
U.S. Consumer Product Safety Commission petitioning for a rule requiring that cookware and heated appliances bearing non-stick coatings carry a label warning of hazards to people and to birds.
Meat is usually fried between 204 and 232 °C (399 and 450 °F), and most oils start to smoke before a temperature of 260 °C (500 °F) is reached, but there are at least two cooking oils (refined
safflower oil and
avocado oil) that have a higher
smoke point than 260 °C (500 °F). Empty cookware can also exceed this temperature when heated.
PFOA
Perfluorooctanoic acid (PFOA, or C8) is used as a
surfactant in the
emulsion polymerization of PTFE. Overall, PTFE cookware is considered an insignificant exposure pathway to PFOA.
[31][32]
Similar polymers
Teflon is also used as the trade name for a polymer with similar properties, perfluoroalkoxy polymer resin (PFA).
The Teflon trade name is also used for other polymers with similar compositions:
These retain the useful PTFE properties of low friction and nonreactivity, but are more easily formable. For example, FEP is softer than PTFE and melts at 533 K (260 °C; 500 °F); it is also highly transparent and resistant to sunlight.
[33]
_on_Tribulus_terrestris_W_IMG_1020.jpg)
