Search This Blog

Thursday, January 18, 2024

Electoral fraud

From Wikipedia, the free encyclopedia
 
Electoral fraud, sometimes referred to as election manipulation, voter fraud, or vote rigging, involves illegal interference with the process of an election, either by increasing the vote share of a favored candidate, depressing the vote share of rival candidates, or both. It differs from but often goes hand-in-hand with voter suppression. What exactly constitutes electoral fraud varies from country to country, though the goal is often election subversion.

Electoral legislation outlaws many kinds of election fraud, but other practices violate general laws, such as those banning assault, harassment or libel. Although technically the term "electoral fraud" covers only those acts which are illegal, the term is sometimes used to describe acts which are legal, but considered morally unacceptable, outside the spirit of an election or in violation of the principles of democracy. Show elections, featuring only one candidate, are sometimes classified as electoral fraud, although they may comply with the law and are presented more as referendums/plebiscites.

In national elections, successful electoral fraud on a sufficient scale can have the effect of a coup d'état, protest or corruption of democracy. In a narrow election, a small amount of fraud may suffice to change the result. Even if the outcome is not affected, the revelation of fraud can reduce voters' confidence in democracy.

Law

In the US someone may be fined and/or imprisoned for not more than five years. In France, someone guilty may be fined and/or imprisoned for not more than one year, or two years if the person is an official (like a mayor for example).

Electorate manipulation

Electoral fraud can occur in advance of voting if the composition of the electorate is altered. The legality of this type of manipulation varies across jurisdictions. Deliberate manipulation of election outcomes is widely considered a violation of the principles of democracy.

Artificial migration or party membership

In many cases, it is possible for authorities to artificially control the composition of an electorate in order to produce a foregone result. One way of doing this is to move a large number of voters into the electorate prior to an election, for example by temporarily assigning them land or lodging them in flophouses. Many countries prevent this with rules stipulating that a voter must have lived in an electoral district for a minimum period (for example, six months) in order to be eligible to vote there. However, such laws can also be used for demographic manipulation as they tend to disenfranchise those with no fixed address, such as the homeless, travelers, Roma, students (studying full-time away from home), and some casual workers.

Another strategy is to permanently move people into an electoral district, usually through public housing. If people eligible for public housing are likely to vote for a particular party, then they can either be concentrated into one area, thus making their votes count for less, or moved into marginal seats, where they may tip the balance towards their preferred party. One example of this was the 1986–1990 Homes for votes scandal in the City of Westminster in England under Shirley Porter.

Immigration law may also be used to manipulate electoral demography. For instance, Malaysia gave citizenship to immigrants from the neighboring Philippines and Indonesia, together with suffrage, in order for a political party to "dominate" the state of Sabah; this controversial process was known as Project IC.

A method of manipulating primary contests and other elections of party leaders are related to this. People who support one party may temporarily join another party (or vote in a crossover way, when permitted) in order to elect a weak candidate for that party's leadership. The goal ultimately is to defeat the weak candidate in the general election by the leader of the party that the voter truly supports. There were claims that this method was being utilised in the UK Labour Party leadership election in 2015, where Conservative-leaning Toby Young encouraged Conservatives to join Labour and vote for Jeremy Corbyn in order to "consign Labour to electoral oblivion". Shortly after, #ToriesForCorbyn trended on Twitter.

Disenfranchisement

The composition of an electorate may also be altered by disenfranchising some classes of people, rendering them unable to vote. In some cases, states have passed provisions that raised general barriers to voter registration, such as poll taxes, literacy and comprehension tests, and record-keeping requirements, which in practice were applied against minority populations to discriminatory effect. From the turn of the century into the late 1960s, most African Americans in the southern states of the former Confederacy were disenfranchised by such measures. Corrupt election officials may misuse voting regulations such as a literacy test or requirement for proof of identity or address in such a way as to make it difficult or impossible for their targets to cast a vote. If such practices discriminate against a religious or ethnic group, they may so distort the political process that the political order becomes grossly unrepresentative, as in the post-Reconstruction or Jim Crow era until the Voting Rights Act of 1965. Felons have been disenfranchised in many states as a strategy to prevent African Americans from voting.

Groups may also be disenfranchised by rules which make it impractical or impossible for them to cast a vote. For example, requiring people to vote within their electorate may disenfranchise serving military personnel, prison inmates, students, hospital patients or anyone else who cannot return to their homes. Polling can be set for inconvenient days, such as midweek or on holy days of religious groups: for example on the Sabbath or other holy days of a religious group whose teachings determine that voting is prohibited on such a day. Communities may also be effectively disenfranchised if polling places are situated in areas perceived by voters as unsafe, or are not provided within reasonable proximity (rural communities are especially vulnerable to this).

In some cases, voters may be invalidly disenfranchised, which is true electoral fraud. For example, a legitimate voter may be "accidentally" removed from the electoral roll, making it difficult or impossible for the person to vote.

In the Canadian federal election of 1917, during the Great War, the Canadian government, led by the Union Party, passed the Military Voters Act and the Wartime Elections Act. The Military Voters Act permitted any active military personnel to vote by party only and allowed that party to decide in which electoral district to place that vote. It also enfranchised those women who were directly related or married to an active soldier. These groups were believed to be disproportionately in favor of the Union government, as that party was campaigning in favor of conscription. The Wartime Elections Act, conversely, disenfranchised particular ethnic groups assumed to be disproportionately in favour of the opposition Liberal Party.

Division of opposition support

Stanford University professor Beatriz Magaloni described a model governing the behaviour of autocratic regimes. She proposed that ruling parties can maintain political control under a democratic system without actively manipulating votes or coercing the electorate. Under the right conditions, the democratic system is maneuvered into an equilibrium in which divided opposition parties act as unwitting accomplices to single-party rule. This permits the ruling regime to abstain from illegal electoral fraud.

Preferential voting systems such as score voting, instant-runoff voting, and single transferable vote are designed to prevent systemic electoral manipulation and political duopoly.

Intimidation

Voter intimidation involves putting undue pressure on a voter or group of voters so that they will vote a particular way, or not at all. Absentee and other remote voting can be more open to some forms of intimidation as the voter does not have the protection and privacy of the polling location. Intimidation can take a range of forms including verbal, physical, or coercion. This was so common that in 1887, a Kansas Supreme Court in New Perspectives on Election Fraud in The Gilded Age said "[...] physical retaliation constituted only a slight disturbance and would not vitiate an election."

  • Violence or the threat of violence: In its simplest form, voters from a particular demographic or known to support a particular party or candidate are directly threatened by supporters of another party or candidate or by those hired by them. In other cases, supporters of a particular party make it known that if a particular village or neighborhood is found to have voted the 'wrong' way, reprisals will be made against that community. Another method is to make a general threat of violence, for example, a bomb threat which has the effect of closing a particular polling place, thus making it difficult for people in that area to vote. One notable example of outright violence was the 1984 Rajneeshee bioterror attack, where followers of Bhagwan Shree Rajneesh deliberately contaminated salad bars in The Dalles, Oregon, in an attempt to weaken political opposition during county elections. Historically, this tactic included Lynching in the United States to terrorize potential African American voters in some areas
  • Attacks on polling places: Polling places in an area known to support a particular party or candidate may be targeted for vandalism, destruction or threats, thus making it difficult or impossible for people in that area to vote
  • Legal threats: In this case, voters will be made to believe, accurately or otherwise, that they are not legally entitled to vote, or that they are legally obliged to vote a particular way. Voters who are not confident about their entitlement to vote may also be intimidated by real or implied authority figures who suggest that those who vote when they are not entitled to will be imprisoned, deported or otherwise punished.
    • For example, in 2004, in Wisconsin and elsewhere voters allegedly received flyers that said, "If you already voted in any election this year, you can't vote in the Presidential Election", implying that those who had voted in earlier primary elections were ineligible to vote. Also, "If anybody in your family has ever been found guilty of anything you can't vote in the Presidential Election." Finally, "If you violate any of these laws, you can get 10 years in prison and your children will be taken away from you."
    • Another method, allegedly used in Cook County, Illinois, in 2004, is to falsely tell particular people that they are not eligible to vote
    • In 1981 in New Jersey, the Republican National Committee created the Ballot Security Task Force to discourage voting among Latino and African-American citizens of New Jersey. The task force identified voters from an old registration list and challenged their credentials. It also paid off-duty police officers to patrol polling sites in Newark and Trenton, and posted signs saying that falsifying a ballot is a crime
  • Coercion: The demographic that controlled the voting ballot would try to persuade others to follow them. By singling out those who were against the majority, people would attempt to switch the voters' decision. Their argument could be that since the majority sides with a certain candidate, they should admit defeat and join the winning side. If this did not work, this led to the threatening of violence seen countless times during elections. Coercion, electoral intimidation was seen in the Navy. In 1885 William C. Whitney started an investigation that involved the men in the Navy. As said by Whitney "the vote of the yard was practically coerced and controlled by the foremen. This instance shows how even in the Navy there were still instances of people going to great lengths for the desired elective to win

Disinformation

People may distribute false or misleading information in order to affect the outcome of an election. For example, in the Chilean presidential election of 1970, the U.S. government's Central Intelligence Agency used "black propaganda"—materials purporting to be from various political parties—to sow discord between members of a coalition between socialists and communists.

Another use of disinformation is to give voters incorrect information about the time or place of polling, thus causing them to miss their chance to vote. As part of the 2011 Canadian federal election voter suppression scandal, Elections Canada traced fraudulent phone calls, telling voters that their polling stations had been moved, to a telecommunications company that worked with the Conservative Party.

Similarly in the United States, right-wing political operatives Jacob Wohl and Jack Burkman were indicted on several counts of bribery and election fraud in October 2020 regarding a voter disinformation scheme they undertook in the months prior to the November, 3 2020 general election. The pair hired a firm to make nearly 85,000 robocalls that targeted minority neighborhoods in Pennsylvania, Ohio, New York, Michigan, and Illinois. Like Democratic constituencies in general that year, minorities voted overwhelmingly by absentee ballot, many judging it a safer option during the COVID-19 pandemic than in-person voting. Baselessly, the call warned potential voters if they submitted their votes by mail that authorities could use their personal information against them, including threats of police arrest for outstanding warrants and forced debt collection by creditors.

On October 24, 2022 Wohl and Burkman pleaded guilty in Cuyahoga County, Ohio Common Pleas Court to one count each of felony telecommunications fraud. Commenting on the tactic of using disinformation to suppress voter turnout, Cuyahoga County Prosecutor Michael C. O’Malley said the two men had "infringed upon the right to vote", and that "by pleading guilty, they were held accountable for their un-American actions.”

Vote buying

Vote buying occurs when a political party or candidate seeks to buy the vote of a voter in an upcoming election. Vote buying can take various forms such as a monetary exchange, as well as an exchange for necessary goods or services. This practice is often used to incentivise or persuade voters to turn out to elections and vote in a particular way. Although this practice is illegal in many countries such as the United States, Argentina, Mexico, Kenya, Brazil and Nigeria, its prevalence remains worldwide.

Voting process and results

A list of threats to voting systems, or electoral fraud methods considered as sabotage are kept by the National Institute of Standards and Technology.

Misleading or confusing ballot papers

Ballot papers may be used to discourage votes for a particular party or candidate, using the design or other features which confuse voters into voting for a different candidate. For example, in the 2000 U.S. presidential election, Florida's butterfly ballot paper was criticized as poorly designed, leading some voters to vote for the wrong candidate. While the ballot itself was designed by a Democrat, it was the Democratic candidate, Al Gore, who was most harmed by voter errors because of this design. Poor or misleading design is usually not illegal and therefore not technically election fraud, but it can nevertheless subvert the principles of democracy.

Sweden has a system with separate ballots used for each party, to reduce confusion among candidates. However, ballots from small parties such as Piratpartiet, Junilistan and Feministiskt initiativ have been omitted or placed on a separate table in the election to the EU parliament in 2009. Ballots from Sweden Democrats have been mixed with ballots from the larger Swedish Social Democratic Party, which used a very similar font for the party name written on the top of the ballot.

Another method of confusing people into voting for a different candidate than intended is to run candidates or create political parties with similar names or symbols as an existing candidate or party. The goal is to mislead voters into voting for the false candidate or party to influence the results. Such tactics may be particularly effective when a large proportion of voters have limited literacy in the language used on the ballot. Again, such tactics are usually not illegal but often work against the principles of democracy.

Another type of possible electoral confusion is multiple variations of voting by different electoral systems. This may cause ballots to be counted as invalid if the wrong system is used. For instance, if a voter puts a first-past-the-post cross in a numbered single transferable vote ballot paper, it is invalidated. For example, in Scotland and other parts of the United Kingdom, up to three different voting systems and types of ballots may be used, based on the jurisdictional level of elections for candidates. Local elections are determined by single transferable votes; Scottish parliamentary elections by the additional member system; national elections and for the UK Parliament by first-past-the-post.

Ballot stuffing

Transparent ballot box used in Ukraine to prevent election officials from pre-stuffing the box with fake ballots
A specialised ballot box used to assist ballot stuffing, featured in Frank Leslie's Illustrated Newspaper in 1856

Ballot stuffing, or "ballot-box stuffing", is the illegal practice of one person submitting multiple ballots during a vote in which only one ballot per person is permitted.

In Major League Baseball's All Star Game

Major League Baseball's All-Star Game has had problems with ballot stuffing on occasion.

  • In 1957, Cincinnati Reds fans aided by a local newspaper arranged for seven of the eight elected starting fielders to be Reds players
  • In 1999, the online ballot was stuffed by computer programmer Chris Nandor in favor of Boston Red Sox shortstop Nomar Garciaparra. Nandor created a program that enabled him to vote multiple times for Garciaparra and his teammates before his ballots—which were submitted through a dial-up connection—were traced back to him
  • In 2015, MLB annulled 65 million (out of a total of 620 million) online ballots after it was reported that eight out of the starting nine positions for the American League would have been Kansas City Royals players

Misrecording of votes

Votes may be misrecorded at source, on a ballot paper or voting machine, or later in misrecording totals. The 2019 Malawian general election was nullified by the Constitutional Court in 2020 because many results were changed by use of correction fluid, as well as duplicate, unverified and unsigned results forms. California allows correction fluid and tape, so changes can be made after the ballot leaves the voter.

Where votes are recorded through electronic or mechanical means, the voting machinery may be altered so that a vote intended for one candidate is recorded for another, or electronic results are duplicated or lost, and there is rarely evidence whether the cause was fraud or error.

Many elections feature multiple opportunities for unscrupulous officials or 'helpers' to record an elector's vote differently from their intentions. Voters who require assistance to cast their votes are particularly vulnerable to having their votes stolen in this way. For example, a blind or illiterate person may be told that they have voted for one party when in fact they have been led to vote for another.

Misuse of proxy votes

Proxy voting is particularly vulnerable to election fraud, due to the amount of trust placed in the person who casts the vote. In several countries, there have been allegations of retirement home residents being asked to fill out 'absentee voter' forms. When the forms are signed and gathered, they are secretly rewritten as applications for proxy votes, naming party activists or their friends and relatives as the proxies. These people, unknown to the voter, cast the vote for the party of their choice. In the United Kingdom, this is known as 'granny farming.'

Destruction or invalidation of ballots

One of the simplest methods of electoral fraud is to destroy ballots for an opposing candidate or party. During the Bourbon Restoration in late 19th century Spain, the organized “loss” of voting slips (es:pucherazo) was used to maintain the agreed alternation between the Liberals and the Conservatives (similar to the English Whigs and Tories. who prior to the Reform Act 1832 maintained Rotten and pocket boroughs. This system of local political domination, especially rooted in rural areas and small cities, was known as caciquismo.

While mass destruction of ballots can be difficult to execute without drawing attention, in a very close election, it may be possible to destroy a very small number of ballot papers without detection, thereby changing the overall result. Blatant destruction of ballot papers can render an election invalid and force it to be re-run. If a party can improve its vote on the re-run election, it can benefit from such destruction as long as it is not linked to it.

Another method is to make it appear that the voter has spoiled his or her ballot, thus rendering it invalid. Typically this would be done by adding another mark to the paper, making it appear that the voter has voted for more candidates than entitled, for instance. It would be difficult to do this to a large number of paper ballots without detection in some locales, but altogether too simple in others, especially jurisdictions where legitimate ballot spoiling by voter would serve a clear and reasonable aim. Examples may include emulating protest votes in jurisdictions that have recently had and since abolished a "none of the above" or "against all" voting option, civil disobedience where voting is mandatory, and attempts at discrediting or invalidating an election. An unusually large share of invalidated ballots may be attributed to loyal supporters of candidates that lost in primaries or previous rounds, did not run or did not qualify to do so, or some manner of protest movement or organized boycott.

In 2016, during the EU membership referendum, Leave-supporting voters in the UK alleged without evidence that the pencils supplied by voting stations would allow the referendum to be rigged in favour of Remain by MI5 erasing their votes from the ballot. This has been described as the "use pens" conspiracy theory.

Tampering with electronic voting systems

General tampering

All voting systems face threats of some form of electoral fraud. The types of threats that affect voting machines vary. Research at Argonne National Laboratories revealed that a single individual with physical access to a machine, such as a Diebold Accuvote TS, can install inexpensive, readily available electronic components to manipulate its functions.

Other approaches include:

  • Tampering with the software of a voting machine to add malicious code that alters vote totals or favors a candidate in any way.
    • Multiple groups have demonstrated this possibility
    • Private companies manufacture these machines. Many companies will not allow public access or review of the machines' source code, claiming fear of exposing trade secrets
  • Tampering with the hardware of the voting machine to alter vote totals or favor any candidate.
    • Some of these machines require a smart card to activate the machine and vote. However, a fraudulent smart card could attempt to gain access to voting multiple times or be pre-loaded with negative votes to favor one candidate over another, as has been demonstrated
  • Abusing the administrative access to the machine by election officials might also allow individuals to vote multiple times
  • Election results that are sent directly over the internet from the polling place centre to the vote-counting authority can be vulnerable to a man-in-the-middle attack, where they are diverted to an intermediate website where the man in the middle flips the votes in favour of a certain candidate and then immediately forwards them on to the vote-counting authority. All votes sent over the internet violate the chain of custody and hence should be avoided by driving or flying memory cards in locked metal containers to the vote-counters. For purposes of getting quick preliminary total results on election night, encrypted votes can be sent over the internet, but final official results should be tabulated the next day only after the actual memory cards arrive in secure metal containers and are counted

South Africa

In 1994, the election which brought majority rule and put Nelson Mandela in office, South Africa's election compilation system was hacked, so they re-tabulated by hand.

Ukraine

In 2014, Ukraine's central election system was hacked. Officials found and removed a virus and said the totals were correct.

United States

During the 2020 presidential election, incumbent President Donald Trump made numerous allegations of electoral fraud by Democratic candidate Joe Biden. The Trump campaign filed numerous legal challenges to the results, making unsubstantiated allegations accusing Democrats of manipulating the votes in favor of Biden. The campaign lost 64 of 65 lawsuits. Election security experts, officials, analysts, and Trump's own Attorney General William Barr have found no evidence of widespread voter fraud.

Voter impersonation

United Kingdom

Concerns about voter impersonation have led the UK government to propose the Electoral Integrity Bill. Academic research shows very little evidence of impersonation, however.

United States

Some commentators, such as former Federal Election Commission member Hans von Spakovsky, have claimed that voter impersonation fraud, in which one person votes by impersonating another, eligible voter, is widespread, but documentation has been scarce and prosecutions rare. Numerous others, such as Professor Larry Sabato, and a variety of studies have shown this to be "relatively rare" in the US. Since 2013, when the US Supreme Court ruled that a provision of the Voting Rights Act was no longer enforceable, several states have passed voter ID laws, ostensibly to counter the alleged fraud. But many experts counter that voter ID laws are not very effective against some forms of impersonation. These ID laws have been challenged by minority groups that claimed to be disadvantaged by the changes. By August 2016, four federal court rulings overturned laws or parts of such laws because they placed undue burdens on minority populations, including African Americans and Native Americans. In each case: Texas, North Carolina, Wisconsin, and North Dakota, and may adversely affect minority voters. The states were required to accept alternatives for the November 2016 elections. These cases are expected to reach the US Supreme Court for hearings. In April 2020, a 20-year voter fraud study by MIT University found the level of fraud "exceedingly rare" since it occurs only in "0.00006 percent" of instances nationally, and, in one state, "0.000004 percent—about five times less likely than getting hit by lightning in the United States.

Allegations of widespread voter fraud in the 2016 United States presidential election by busing out-of-state voters to New Hampshire were found to be false. Suspicions of hacking of electronic voting machines in Wisconsin, Michigan, and Pennsylvania were determined to be unfounded.

The North Carolina Board of Elections reported in 2017 on questions of voter fraud and the state's proposed voter ID law. The report showed that out of 4,769,640 votes cast in the November 2016 election in North Carolina, only one illegal vote would potentially have been blocked by the voter ID law. The investigation found fewer than 500 incidences of invalid ballots cast, the vast majority of which were cast by individuals on probation for felony who were likely not aware that this status disqualified them from voting, and the total number of invalid votes was far too small to have affected the outcome of any race in North Carolina in the 2016 election.

Artificial results

In particularly corrupt regimes, the voting process may be nothing more than a sham, to the point that officials simply announce whatever results they want, sometimes without even bothering to count the votes. While such practices tend to draw international condemnation, voters typically have little if any recourse, as there would seldom be any ways to remove the fraudulent winner from power, short of a revolution.

In Turkmenistan, incumbent President Gurbanguly Berdymukhamedov received 97.69% of votes in the 2017 election, with his sole opponent, who was seen as pro-government, in fact being appointed by Berdymukhamedov. In Georgia, Mikheil Saakashvili received 96.2% of votes in the election following the Rose Revolution while his ally Nino Burjanadze was an interim head of state.

Postal ballot fraud

Fraud with absentee or postal ballots has been found occasionally in the United Kingdom, and the United States and has been alleged in Malaysia. In both the United Kingdom and the United States, experts estimate there is more fraud with postal ballots than in-person voting, and that even so it has affected only a few local elections.

Types of fraud have included pressure on voters from family or others, since the ballot is not cast in secret;[ collection of ballots by dishonest collectors who mark votes or fail to deliver ballots;[ and insiders changing or destroying ballots after they arrive.

A significant measure to prevent some types of fraud has been to require the voter's signature on the outer envelope, which is compared to one or more signatures on file before taking the ballot out of the envelope and counting it. Not all places have standards for signature review, and there have been calls to update signatures more often to improve this review. While any level of strictness involves rejecting some valid votes and accepting some invalid votes, there have been concerns that signatures are improperly rejected from young and minority voters at higher rates than others, with no or limited ability of voters to appeal the rejection.

Some problems have inherently limited scope, such as family pressure, while others can affect several percent of the vote, such as dishonest collectors and signature verification.

In legislature

Vote fraud can also take place in legislatures. Some of the forms used in national elections can also be used in parliaments, particularly intimidation and vote-buying. Because of the much smaller number of voters, however, election fraud in legislatures is qualitatively different in many ways. Fewer people are needed to 'swing' the election, and therefore specific people can be targeted in ways impractical on a larger scale. For example, Adolf Hitler achieved his dictatorial powers due to the Enabling Act of 1933. He attempted to achieve the necessary two-thirds majority to pass the Act by arresting members of the opposition, though this turned out to be unnecessary to attain the needed majority. Later, the Reichstag was packed with Nazi party members who voted for the Act's renewal.

In many legislatures, voting is public, in contrast to the secret ballot used in most modern public elections. This may make their elections more vulnerable to some forms of fraud since a politician can be pressured by others who will know how the legislator voted. However, it may also protect against bribery and blackmail, since the public and media will be aware if a politician votes in an unexpected way. Since voters and parties are entitled to pressure politicians to vote a particular way, the line between legitimate and fraudulent pressure is not always clear.

As in public elections, proxy votes are particularly prone to fraud. In some systems, parties may vote on behalf of any member who is not present in parliament. This protects those members from missing out on voting if prevented from attending parliament, but it also allows their party to prevent them from voting against its wishes. In some legislatures, proxy voting is not allowed, but politicians may rig voting buttons or otherwise illegally cast "ghost votes" while absent.

Detection and prevention

The three main strategies for the prevention of electoral fraud in society are:

  1. Auditing the election process
  2. Deterrence through consistent and effective prosecution
  3. Cultivation of mores that discourage corruption

Some of the main fraud prevention tactics can be summarised as secrecy and openness. The secret ballot prevents many kinds of intimidation and vote selling, while transparency at all other levels of the electoral process prevents and allows detection of most interference.

Election audits

Election auditing refers to any review conducted after polls close for the purpose of determining whether the votes were counted accurately (a results audit) or whether proper procedures were followed (a process audit), or both.

Audits vary and can include checking that the number of voters signed in at the polls matches the number of ballots, seals on ballot boxes and storage rooms are intact, computer counts (if used) match hand counts, and counts are accurately totaled.

Election recounts are a specific type of audit, with elements of both results and process audits.

Prosecution

In the United States the goal of prosecutions is not to stop fraud or keep fraudulent winners out of office; it is to deter and punish years later. The Justice Department has published Federal Prosecution of Election Offenses in eight editions from 1976 to 2017, under Presidents Ford, Carter, Reagan, Clinton, Bush and Trump. It says, "Department does not have authority to directly intercede in the election process itself. ... overt criminal investigative measures should not ordinarily be taken ... until the election in question has been concluded, its results certified, and all recounts and election contests concluded." Sentencing guidelines provide a range of 0–21 months in prison for a first offender; offense levels range from 8 to 14. Investigation, prosecution and appeals can take over 10 years.

In the Philippines, former President Gloria Macapagal Arroyo was arrested in 2011 following the filing of criminal charges against her for electoral sabotage, in connection with the 2007 Philippine general election. She was accused of conspiring with election officials to ensure the victory of her party's senatorial slate in the province of Maguindanao, through the tampering of election returns.

Secret ballot

The secret ballot, in which only the voter knows how they have voted, is believed by many to be a crucial part of ensuring free and fair elections through preventing voter intimidation or retribution. Others argue that the secret ballot enables election fraud (because it makes it harder to verify that votes have been counted correctly) and that it discourages voter participation. Although the secret ballot was sometimes practiced in ancient Greece and was a part of the Constitution of the Year III of 1795, it only became common in the nineteenth century. Secret balloting appears to have been first implemented in the former British colony—now an Australian state—of Tasmania on 7 February 1856. By the turn of the century, the practice had spread to most Western democracies.

In the United States, the popularity of the Australian ballot grew as reformers in the late 19th century sought to reduce the problems of election fraud. Groups such as the Greenbackers, Nationalist, and more fought for those who yearned to vote, but were exiled for their safety. George Walthew, Greenback, helped initiate one of the first secret ballots in America in Michigan in 1885. Even George Walthew had a predecessor in John Seitz, Greenback, who campaigned a bill to "preserve the purity of elections" in 1879 after the discovery of Ohio's electoral fraud in congressional elections.

The efforts of many helped accomplish this and led to the spread of other secret ballots all across the country. As mentioned on February 18, 1890, in the Galveston News "The Australian ballot has come to stay. It protects the independence of the voter and largely puts a stop to vote to buy." Before this, it was common for candidates to intimidate or bribe voters, as they would always know who had voted which way.

Transparency

Most methods of preventing electoral fraud involve making the election process completely transparent to all voters, from nomination of candidates through casting of the votes and tabulation. A key feature in ensuring the integrity of any part of the electoral process is a strict chain of custody.

To prevent fraud in central tabulation, there has to be a public list of the results from every single polling place. This is the only way for voters to prove that the results they witnessed in their election office are correctly incorporated into the totals.

End-to-end auditable voting systems provide voters with a receipt to allow them to verify their vote was cast correctly, and an audit mechanism to verify that the results were tabulated correctly and all votes were cast by valid voters. However, the ballot receipt does not permit voters to prove to others how they voted, since this would open the door towards forced voting and blackmail. End-to-end systems include Punchscan and Scantegrity, the latter being an add-on to optical scan systems instead of a replacement.

In many cases, election observers are used to help prevent fraud and assure voters that the election is fair. International observers (bilateral and multilateral) may be invited to observe the elections (examples include election observation by the Organisation for Security and Cooperation in Europe (OSCE), European Union election observation missions, observation missions of the Commonwealth of Independent States (CIS), as well as international observation organised by NGOs, such as CIS-EMO, European Network of Election Monitoring Organizations (ENEMO), etc.). Some countries also invite foreign observers (i.e. bi-lateral observation, as opposed to multi-lateral observation by international observers).

In addition, national legislatures of countries often permit domestic observation. Domestic election observers can be either partisan (i.e. representing interests of one or a group of election contestants) or non-partisan (usually done by civil society groups). Legislations of different countries permit various forms and extents of international and domestic election observation.

Election observation is also prescribed by various international legal instruments. For example, paragraph 8 of the 1990 Copenhagen Document states that "The [OSCE] participating States consider that the presence of observers, both foreign and domestic, can enhance the electoral process for States in which elections are taking place. They, therefore, invite observers from any other CSCE participating States and any appropriate private institutions and organisations who may wish to do so to observe the course of their national election proceedings, to the extent permitted by law. They will also endeavour to facilitate similar access for election proceedings held below the national level. Such observers will undertake not to interfere in the electoral proceedings".

Critics note that observers cannot spot certain types of election fraud like targeted voter suppression or manipulated software of voting machines.

Statistical indicators and election forensics

Various forms of statistics can be indicators of election fraud—e.g., exit polls which diverge from the final results. Well-conducted exit polls serve as a deterrent to electoral fraud. However, exit polls are still notoriously imprecise. For instance, in the Czech Republic, some voters are afraid or ashamed to admit that they voted for the Communist Party (exit polls in 2002 gave the Communist party 2–3 percentage points less than the actual result). Variations in willingness to participate in an exit poll may result in an unrepresentative sample compared to the overall voting population.

When elections are marred by ballot-box stuffing (e.g., the Armenian presidential elections of 1996 and 1998), the affected polling stations will show abnormally high voter turnouts with results favouring a single candidate. By graphing the number of votes against turnout percentage (i.e., aggregating polling stations results within a given turnout range), the divergence from bell-curve distribution gives an indication of the extent of the fraud. Stuffing votes in favour of a single candidate affects votes vs. turnout distributions for that candidate and other candidates differently; this difference could be used to quantitatively assess the number of votes stuffed. Also, these distributions sometimes exhibit spikes at round-number turnout percentage values. High numbers of invalid ballots, overvoting or undervoting are other potential indicators. Risk-limiting audits are methods to assess the validity of an election result statistically without the effort of a full election recount.

Though election forensics can determine if election results are anomalous, the statistical results still need to be interpreted. Alan Hicken and Walter R. Mebane describe the results of election forensic analyses as not providing "definitive proof" of fraud. Election forensics can be combined with other fraud detection and prevention strategies, such as in-person monitoring.

Voting machine integrity

One method for verifying voting machine accuracy is Parallel Testing, the process of using an independent set of results compared to the original machine results. Parallel testing can be done prior to or during an election. During an election, one form of parallel testing is the VVPAT. Voter-verified paper audit trail (VVPAT) or verified paper record (VPR) is a method of providing feedback to voters using a ballotless voting system. A VVPAT is intended as an independent verification system for voting machines designed to allow voters to verify that their vote was cast correctly, to detect possible election fraud or malfunction, and to provide a means to audit the stored electronic results. This method is only effective if statistically significant numbers of voters verify that their intended vote matches both the electronic and paper votes.

On election day, a statistically significant number of voting machines can be randomly selected from polling locations and used for testing. This can be used to detect potential fraud or malfunction unless manipulated software would only start to cheat after a certain event like a voter pressing a special key combination (Or a machine might cheat only if someone does not perform the combination, which requires more insider access but fewer voters).

Another form of testing is Logic & Accuracy Testing (L&A), pre-election testing of voting machines using test votes to determine if they are functioning correctly.

Another method to ensure the integrity of electronic voting machines is independent software verification and certification. Once a software is certified, code signing can ensure the software certified is identical to that which is used on election day. Some argue certification would be more effective if voting machine software was publicly available or open source.

Certification and testing processes conducted publicly and with oversight from interested parties can promote transparency in the election process. The integrity of those conducting testing can be questioned.

Testing and certification can prevent voting machines from being a black box where voters cannot be sure that counting inside is done as intended.

One method that people have argued would help prevent these machines from being tampered with would be for the companies that produce the machines to share the source code, which displays and captures the ballots, with computer scientists. This would allow external sources to make sure that the machines are working correctly.

Notable United States legislation

Help America Vote Act

The Help America Vote Act (Pub. L.Tooltip Public Law (United States) 107–252 (text) (PDF)), or HAVA, is a United States federal law enacted on October 29, 2002. It was drafted (at least in part) in reaction to the controversy surrounding the 2000 U.S. presidential election. The goals of HAVA are: to replace punchcard and lever-based voting systems; create the Election Assistance Commission to assist in the administration of Federal elections; and establish minimum election administration standards.

Voting Rights Act of 1965

Federal legislation of the 20th century to protect voting rights, especially of ethnic and language minorities who had been disenfranchised for decades by states' constitutions and practices. Initially, it enforced the constitutional right of African Americans in the South to vote, where millions of people had been mostly disenfranchised since the turn of the 20th century and excluded from politics. The law has also protected other ethnicities, such as Hispanics, Asians, Native Americans, and language minorities in other states, who have been discriminated against at various times, especially in the process of voter registration and electoral practices.

Civil Rights Act of 1964

The Civil Rights Act of 1964 (Pub. L.Tooltip Public Law (United States) 88–352, 78 Stat. 241, enacted July 2, 1964) was a piece of legislation in the United States that outlawed major forms of discrimination against African Americans and other minorities.

Postal voting

From Wikipedia, the free encyclopedia
   No postal voting system in place
   Postal voting available only for some/all citizens abroad
   Postal voting available for some/all citizens abroad, and for citizens at home meeting certain conditions
   Postal voting available for all citizens on demand

Ballot and other documents for postal voting for the 2015 Luxembourg constitutional referendum

Postal voting is voting in an election where ballot papers are distributed to electors (and typically returned) by post, in contrast to electors voting in person at a polling station or electronically via an electronic voting system.

In an election, postal votes may be available on demand or limited to individuals meeting certain criteria, such as a proven inability to travel to a designated polling place. Most electors are required to apply for a postal vote, although some may receive one by default. In some elections postal voting is the only voting method allowed and is referred to as all-postal voting. With the exception of those elections, postal votes constitute a form of early voting and may be considered an absentee ballot.

Typically, postal votes must be mailed back before the scheduled election day. However, in some jurisdictions return methods may allow for dropping off the ballot in person via secure drop boxes or at voting centers. Postal votes may be processed by hand or scanned and counted electronically. The history of postal voting dates back to the 19th century, and modern-day procedures and availability vary by jurisdiction. Research, focused on the United States and using data from states where postal voting is widely available—California, Oregon and Washington—shows that the availability of postal voting tends to increase voter turnout.

Electoral laws typically stipulate a series of checks to protect against voter fraud and allow for the integrity and secrecy of the submitted ballot to be maintained. Known instances of fraud are very rare. Coordinated, large-scale fraud by postal voting is likely hard to pull off undetected because the large number of interested parties (such as officials, political operators, and journalists) as well as a large number of scholars and analysts who are capable of detecting statistical outliers in vote totals signifying large-scale fraud. Officials can confirm instances of fraud by checking signatures and conducting basic detective work.

All-postal voting

All-postal voting is a form of postal voting in which all electors receive their ballot papers through the post, not just those who requested an absentee ballot. Depending on the country, electors may have to return their ballot papers by post or they may be allowed to deliver them by hand to specified drop-off locations. All-postal voting is used in several states in the United States and in Switzerland, and was used in 2016 in the Australian Marriage Law Postal Survey as well as in four regions of the United Kingdom in the 2004 European Parliament election.

There is some evidence that all-postal voting leads to higher turnout than in-person voting or mail-in voting that requires voters to first request a ballot (rather than receive it automatically).

By country

Australia

At the 2016 Australian federal election, there were 1.2 million postal votes cast, amounting to 8.5 percent of total votes.

Postal voting in Australia was introduced for federal elections in 1902, and first used at the 1903 election. It was abolished by the Fisher government in 1910, following claims that it was open to abuse and biased towards rural voters. The Cook government's bill to restore postal voting was one of the "triggers" for the double dissolution prior to the 1914 election. Postal voting was eventually restored by the Hughes government in 1918 and has not been challenged since, although the provisions and requirements have been amended on a number of occasions.

Prior to Federation in 1901, Western Australia introduced a form of postal voting in 1877 with strict eligibility criteria. South Australia introduced postal voting for seamen in 1890, and a further act in 1896 gave postal votes to any elector who would be more than 15 miles (24 km) from home on election day, as well as for any woman unable to travel "by reason of her health". Victoria passed a similar law in 1899, and the first federal postal voting legislation was also modelled on the 1896 South Australian act.

Procedure

Postal voting at a federal level is governed by the Commonwealth Electoral Act 1918 and administered by the Australian Electoral Commission (AEC). Postal votes are available to those who will be absent from their electoral division through travel, or who those are unable to attend a polling booth due to illness, infirmity, "approaching childbirth", caring responsibilities, reasonable fears for their safety, religious beliefs, imprisonment, status as a silent elector, or employment reasons.

Eligible voters may make a postal vote application (PVA) prior to each election, or apply for status as a "general postal voter" and receive a postal ballot automatically. Postal voters receive their ballot(s) and a prepaid envelope containing their name and address, as well as a predetermined security question from the PVA. Voters are required to sign the envelope and provide the correct answer to the security question. They are also required to have a witness sign and date the envelope. As of 2016, postal votes were able to be received and entered into the count up to 13 days after election day. Following the 2016 election, it was observed that the strict scrutiny process afforded to postal votes was a "significant contributor" to delays in declaring the results of close elections.

Austria

Austria enabled postal voting in 2007 by amending Article 26 of the Constitution of Austria. Electors request an electoral card that can be completed in person or in private and sent via post. In the 2017 election, roughly 780,000 postal ballots were cast representing 15% of all ballots. In 2019, this number has increased to 1,070,000.

Canada

The ability to vote when in-person voting is not possible was first introduced with the federal Military Voters Act in 1917, giving all Canadian soldiers and their spouses the right to vote. Public servants became eligible in 1970. The right was further extended to civilian support personnel on Canadian Forces bases in the 1977. In 1993, Bill C-114 extended the special ballot vote (Special Voting Rules) by mail to all Canadian citizens.

Use of special voting rules, including mail voting, has grown with each election. In the 42nd general election (2015), the number of voters increased by 117 percent over the previous election to roughly 619,000. This number grew to roughly 660,000 in the 43rd election (2019) representing 3.6 percent of electors.

Finland

Finland introduced vote by post in 2019 for eligible voters living permanently abroad and eligible voters staying abroad at the time of the elections.

France

Postal voting existed in France until 1975, when it was banned (except in very limited circumstances) due to fears of voter fraud. The highly publicized use of widespread postal voting in the 2020 United States presidential election has reignited debate in France about the use of postal voting, but no consensus or concrete plans exist for reintroducing it.

Germany

Postal voting is common in Germany, with 47% of the electorate voting by post in the 2021 general election. Absentee voting has existed in Germany since 1957, originally in order to ensure that all German citizens, especially the old, sick, and disabled, and citizens living abroad, have the opportunity to participate in elections. At first, postal voters had to state why they could not cast their vote in person on Election Day; but this requirement was dropped in 2008, allowing everyone to use postal voting. Like in many other countries, in more recent years voting by mail has become increasingly popular among younger and non-disabled citizens residing within the country; as such, various tools Archived 2021-03-10 at the Wayback Machine are being developed to help citizens, both domestic and abroad, more easily apply for postal voting.

Greece

Prime Minister Kyriakos Mitsotakis announced that postal voting will be used in the European Parliament Elections on June 9, 2024. He also said that the adoption of this option in European Parliament elections serves as a precursor to its implementation in national elections, which will be held in 2027

Hungary

Hungarian citizens living abroad who do not have an official address in Hungary are allowed to vote by mail. They are only allowed to vote for party lists, but not for local representatives. In the last parliamentary election in 2018, 267,233 votes (4.6% of all votes) were submitted via mail. 48% of all valid postal votes were submitted from Romania.

India

Postal voting in India is done only through the Electronically Transmitted Postal Ballot Papers (ETPB) system of Election Commission of India, where ballot papers are distributed to the registered eligible voters and they return the votes by post. When the counting of votes commences, these postal votes are counted first before the counting of votes from the electronic voting machines of all other voters. Only certain categories of people are eligible to register as postal voters. People working in the union armed forces and state police as well as their wives, and employees working for the Government of India who are officially posted abroad can register for the postal vote, these are also called service voters. Additionally, people in preventive detention, disabled and those above the age of 65 years old can use postal vote. Prisoners can not vote at all. Media persons too have been allowed to use the postal ballot to cast their vote. The Communist Party of India (Marxist) has alleged that postal ballots "will adversely effect the verifiability of a large number of voters, thus, transparency and integrity of the process", and expressed concerns with "instances of manipulation and malpractice" with postal ballots.

Indonesia

Postal voting documents sent to an Indonesian voter in the United Kingdom during the 2019 Indonesian general election

Eligible Indonesians living abroad are able to vote by mail in national elections by registering at the Indonesian overseas election commission in their country of residence. Beside presidential elections, they are also able to vote in DPR elections. All overseas Indonesian voters are included in the Jakarta 2nd constituency, which also contains Central and South Jakarta.

Italy

Electoral package sent to an Italian voter in South America during the 2013 Italian general election

Since 2001 Italian citizens living abroad have the right to vote by mail in all referendums and national elections being held in Italy (provided they had registered their residence abroad with their relevant consulate).

Malaysia

In Malaysia, opposition leader and former deputy prime minister Anwar Ibrahim alleged that postal votes have been used by the ruling Barisan Nasional coalition in securing seats in certain constituencies. He also said that in one particular constituency (Setiawangsa), he claimed that his Parti Keadilan Rakyat had actually won during the 2008 elections, before 14,000 postal votes came in awarding the incumbent BN parliamentarian the seat with a majority of 8,000 votes. In Malaysia, only teachers, military personnel, and policemen based away from their constituencies are eligible to submit postal votes.

Mexico

Postal ballot paper for Mexico federal election 2012

In Mexico, since the 2006 federal elections, postal voting for people living abroad has been permitted. A request can be made to the National Electoral Institute which then sends the ballots outside the country.

Norway

Postal voting is accepted for voters who are staying abroad and are not close to a foreign station or other voting place. Voters can request ballots to be sent to them. Voters are also allowed to write their own ballots.

Philippines

Mail-in ballots are an option for Overseas Filipinos in select countries only. The general practise for local and overseas absentee voting in Philippine elections requires that ballots be cast in person at select polling places, such as a consulate office.

Singapore

Singaporean citizens living abroad may vote by post in presidential and parliamentary elections.

Spain

In Spain, for European, regional and municipal elections, voters who will be absent from their town on election day or are ill or disabled, may request a postal vote at a post office. The application must be submitted personally or through a representative in case of illness or disability certified by a medical certificate.

Switzerland

Swiss federal law allows postal voting in all federal elections and referendums, and all cantons also allow it for cantonal ballot issues. All voters receive their personal ballot by mail and may either cast it at a polling station or mail it back. As of 2019, approximately 90% of Swiss voters cast ballots using Remote Postal Voting.

United Kingdom

Absentee voting in the United Kingdom is allowed by proxy or post (known as postal voting on demand) for any elector. Postal voting does not require a reason, apart from in Northern Ireland, where postal voting is available only if it would be unreasonable to expect a voter to go to a polling station on polling day as a result of employment, disability or education restrictions. Postal voting is common in the United Kingdom, 8.4 million postal votes were issued, 18% of the UK electorate (18.2% England, 19.4% Scotland, 19.4% Wales and 1.9% N.Ireland) in the 2017 general election.

Proxy voting is allowed for people who will be away, working, or medically disabled, anyone eligible to vote in the election may be a proxy for close relatives and two unrelated people. The proxy voter for an elector can also be a postal voter, known as Postal Proxy voting. If a person becomes unable to vote in person within 6 days of an election, including up to 5pm on the polling day, they can apply for another person to vote on their behalf as an emergency proxy.

Postal voting in the UK has been (allegedly) subject to fraud, undue influence, theft and tampering, other forms of voting have also been subject to fraud. The number of cases reported to or by the Electoral Commission however is low. "[T]hese concerns need to be balanced by the fact that it is entirely legitimate for political parties to encourage electors to vote, be it in person or by post".

United States

No-excuse postal voting.
  All-mail voting
  No-excuse absentee voting
  Excuse-needed absentee voting

In the United States, postal voting (commonly referred to as mail-in voting, vote-by-mail or vote from home) is a process in which a ballot is mailed to the home of a registered voter, who fills it out and returns it via postal mail or by dropping it off in-person at a voting center or into a secure drop box. Deadlines are set under state law, with some states requiring ballots be received by election day and others allowing ballots to be received after election day so long as they are postmarked by election day. Vote-by-mail is available in both Republican and Democratic states, with research showing that the availability of postal voting increases voter turnout. Five states—Colorado, Hawaii, Oregon, Utah and Washington—hold elections almost entirely by mail.

It has been argued that postal voting has a greater risk of fraud than in-person voting, though there are few known instances of such fraud. Mail-in ballots pose other challenges, including signature verification, prompt delivery of ballots, and issues that have led to evidence suggesting younger voters, as well as voters from racial and ethnic minorities, are more likely to have their vote-by-mail ballots rejected.

In the 2016 general election, approximately 33 million postal ballots were cast, about a quarter of all ballots cast. Some jurisdictions used only vote-by-mail and others used absentee voting by mail.

In April 2020, during lockdowns for the COVID-19 pandemic, an NBC News/Wall Street Journal poll found that 58% of those polled would favor nationwide election reform to allow everyone to vote by mail. President Donald Trump has brought up doubts about the integrity of unsolicited mail-in voting in the 2020 election.

Following false claim of widespread voter fraud in the 2020 presidential election, Republican state lawmakers began an effort to roll back access to postal voting.

Voting machine

From Wikipedia, the free encyclopedia

Voting machines differ in usability, security, cost, speed, accuracy, and ability of the public to oversee elections. Machines may be more or less accessible to voters with different disabilities.

Tallies are simplest in parliamentary systems where just one choice is on the ballot, and these are often tallied manually. In other political systems where many choices are on the same ballot, tallies are often done by machines to give faster results.

Historical machines

In ancient Athens (5th and 4th centuries BCE) voting was done by different colored pebbles deposited in urns, and later by bronze markers created by the state and officially stamped. This procedure served for elected positions, jury procedures, and ostracisms. The first use of paper ballots was in Rome in 139 BCE, and their first use in the United States was in 1629 to select a pastor for the Salem Church.

Mechanical voting

Balls

The first major proposal for the use of voting machines came from the Chartists in the United Kingdom in 1838. Among the radical reforms called for in The People's Charter were universal suffrage and voting by secret ballot. This required major changes in the conduct of elections, and as responsible reformers, the Chartists not only demanded reforms but described how to accomplish them, publishing Schedule A, a description of how to run a polling place, and Schedule B, a description of a voting machine to be used in such a polling place.

The Chartist voting machine, attributed to Benjamin Jolly of 19 York Street in Bath, allowed each voter to cast one vote in a single race. This matched the requirements of a British parliamentary election. Each voter was to cast his vote by dropping a brass ball into the appropriate hole in the top of the machine by the candidate's name. Each voter could only vote once because each voter was given just one brass ball. The ball advanced a clockwork counter for the corresponding candidate as it passed through the machine, and then fell out the front where it could be given to the next voter.

Buttons

In 1875, Henry Spratt of Kent received a U.S. patent for a voting machine that presented the ballot as an array of push buttons, one per candidate. Spratt's machine was designed for a typical British election with a single plurality race on the ballot.

In 1881, Anthony Beranek of Chicago patented the first voting machine appropriate for use in a general election in the United States. Beranek's machine presented an array of push buttons to the voter, with one row per office on the ballot, and one column per party. Interlocks behind each row prevented voting for more than one candidate per race, and an interlock with the door of the voting booth reset the machine for the next voter as each voter left the booth.

Tokens

The psephograph was patented by Italian inventor Eugenio Boggiano in 1907. It worked by dropping a metal token into one of several labeled slots. The psephograph would automatically tally the total tokens deposited in each slot. The psephograph was first used in a theatre in Rome, where it was used to gauge audience reception to a play: "good", "bad", or "indifferent".

Analog computers

Lenna Winslow's 1910 voting machine was designed to offer all the questions on the ballot to men and only some to women because women often had partial suffrage, e.g. being allowed to vote on issues but not candidates. The machine had two doors, one marked "Gents" and the other marked "Ladies". The door used to enter the voting booth would activate a series of levers and switches to display the full ballot for men and the partial ballot for women.

Dials

By July 1936, IBM had mechanized voting and ballot tabulation for single transferable vote elections. Using a series of dials, the voter could record up to twenty ranked preferences to a punched card, one preference at a time. Write-in votes were permitted. The machine prevented a voter from spoiling their ballot by skipping rankings and by giving the same ranking to more than one candidate. A standard punched-card counting machine would tabulate ballots at a rate of 400 per minute.

Demo version of lever style voting machine on display at the National Museum of American History

Levers

Lever machines were commonly used in the United States until the 1990s. In 1889, Jacob H. Myers of Rochester, New York, received a patent for a voting machine that was based on Beranek's 1881 push button machine. This machine saw its first use in Lockport, New York, in 1892. In 1894, Sylvanus Davis added a straight-party lever and significantly simplified the interlocking mechanism used to enforce the vote-for-one rule in each race. By 1899, Alfred Gillespie introduced several refinements. It was Gillespie who replaced the heavy metal voting booth with a curtain that was linked to the cast-vote lever, and Gillespie introduced the lever by each candidate name that was turned to point to that name in order to cast a vote for that candidate. Inside the machine, Gillespie worked out how to make the machine programmable so that it could support races in which voters were allowed to vote for, for example, 3 out of 5 candidates.

On December 14, 1900, the U.S. Standard Voting Machine Company was formed, with Alfred Gillespie as one of its directors, to combine the companies that held the Myers, Davis, and Gillespie patents. By the 1920s, this company (under various names) had a monopoly on voting machines, until, in 1936, Samuel and Ransom Shoup obtained a patent for a competing voting machine. By 1934, about a sixth of all presidential ballots were being cast on mechanical voting machines, essentially all made by the same manufacturer.

Commonly, a voter enters the machine and pulls a lever to close the curtain, thus unlocking the voting levers. The voter then makes his or her selection from an array of small voting levers denoting the appropriate candidates or measures. The machine is configured to prevent overvotes by locking out other candidates when one candidate's lever is turned down. When the voter is finished, a lever is pulled which opens the curtain and increments the appropriate counters for each candidate and measure. At the close of the election, the results are hand copied by the precinct officer, although some machines could automatically print the totals. New York was the last state to stop using these machines, under court order, by the fall of 2009.

Punched card voting

The Votomatic vote recorder, a punched card voting machine originally developed in the mid-1960s.

Punched card systems employ a card (or cards) and a small clipboard-sized device for recording votes. Voters punch holes in the cards with a ballot marking device. Typical ballot marking devices carry a ballot label that identifies the candidates or issues associated with each punching position on the card, although in some cases, the names and issues are printed directly on the card. After voting, the voter may place the ballot in a ballot box, or the ballot may be fed into a computer vote tabulating device at the precinct.

The idea of voting by punching holes on paper or cards originated in the 1890s and inventors continued to explore this in the years that followed. By the late 1890s John McTammany's voting machine was used widely in several states. In this machine, votes were recorded by punching holes in a roll of paper comparable to those used in player pianos, and then tabulated after the polls closed using a pneumatic mechanism.

Punched-card voting was proposed occasionally in the mid-20th century, but the first major success for punched-card voting came in 1965, with Joseph P. Harris' development of the Votomatic punched-card system. This was based on IBM's Port-A-Punch technology. Harris licensed the Votomatic to IBM. William Rouverol built the prototype system.

The Votomatic system was very successful and widely distributed. By the 1996 Presidential election, some variation of the punched card system was used by 37.3% of registered voters in the United States.

Votomatic style systems and punched cards received considerable notoriety in 2000 when their uneven use in Florida was alleged to have affected the outcome of the U.S. presidential election. The Help America Vote Act of 2002 "effectively banned pre-scored punched card ballots." Votomatics were "last used in 2 counties in Idaho in the 2014 General Election".

Current voting machines

An electronic voting machine is a voting machine based on electronics.

Two main technologies exist: optical scanning and direct recording (DRE).

Optical scanning

In an optical scan voting system, or marksense, each voter's choices are marked on one or more pieces of paper, which then go through a scanner. The scanner creates an electronic image of each ballot, interprets it, creates a tally for each candidate, and usually stores the image for later review.

The voter may mark the paper directly, usually in a specific location for each candidate. Or the voter may select choices on an electronic screen, which then prints the chosen names, and a bar code or QR code summarizing all choices, on a sheet of paper to put in the scanner.

Hundreds of errors in optical scan systems have been found, from feeding ballots upside down, multiple ballots pulled through at once in central counts, paper jams, broken, blocked or overheated sensors which misinterpret some or many ballots, printing which does not align with the programming, programming errors, and loss of files. The cause of each programming error is rarely found, so it is not known how many were accidental or intentional.

Direct-recording electronic (DRE)

DRE with paper for voter to verify (VVPAT)

In a DRE voting machine system, a touch screen displays choices to the voter, who selects choices, and can change their mind as often as needed, before casting the vote. Staff initialize each voter once on the machine, to avoid repeat voting. Voting data are recorded in memory components, and can be copied out at the end of the election.

Some of these machines also print names of chosen candidates on paper for the voter to verify, though less than 40% verify. These names on paper are kept behind glass in the machine, and can be used for election audits and recounts if needed. The tally of the voting data is printed on the end of the paper tape. The paper tape is called a Voter-verified paper audit trail (VVPAT). The VVPATs can be tallied at 20–43 seconds of staff time per vote (not per ballot).

For machines without VVPAT, there is no record of individual votes to check. For machines with VVPAT, checking is more expensive than with paper ballots, because on the flimsy thermal paper in a long continuous roll, staff often lose their place, and the printout has each change by each voter, not just their final decisions.

Problems have included public web access to the software, before it is loaded into machines for each election, and programming errors which increment different candidates than voters select. The Federal Constitutional Court of Germany found that with existing machines could not be allowed because they could not be monitored by the public.

Successful hacks have been demonstrated under laboratory conditions.

Location of tallying

Optical scans can be done either at the place of voting,"precinct", or in another location. DRE machines always tally at the precinct.

Precinct-count voting system

A precinct-count voting system is a voting system that tallies ballots at the polling place. Precinct-count machines typically analyze ballots as they are cast. This approach allows for voters to be notified of voting errors such as overvotes and can prevent spoilt votes. After the voter has a chance to correct any errors, the precinct-count machine tallies that ballot. Vote totals are made public only after the close of polling. DREs and precinct scanners have electronic storage of the vote tallies and may transmit results to a central location over public telecommunication networks.

Central-count voting system

A medium-speed central-count ballot scanner, the DS450 made by Election Systems & Software can scan and sort about 4000 ballots per hour.

A central count voting system is a voting system that tallies ballots from multiple precincts at a central location. Central count systems are also commonly used to process absentee ballots.

Central counting can be done by hand, and in some jurisdictions, central counting is done using the same type of voting machine deployed at polling places, but since the introduction of the Votomatic punched-card voting system and the Norden Electronic Vote Tallying System in the 1960s, high speed ballot tabulators have been in widespread use, particularly in large metropolitan jurisdictions. Today, commodity high-speed scanners sometimes serve this purpose, but special-purpose ballot scanners are also available that incorporate sorting mechanisms to separate tallied ballots from those requiring human interpretation.

Voted ballots are typically placed into secure ballot boxes at the polling place. Stored ballots and/or Precinct Counts are transported or transmitted to a central counting location. The system produces a printed report of the vote count, and may produce a report stored on electronic media suitable for broadcasting, or release on the Internet.

Entropy (information theory)

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Entropy_(information_theory) In info...