Search This Blog

Friday, December 12, 2025

Climate change

From Wikipedia, the free encyclopedia

Present-day climate change includes both global warming—the ongoing increase in global average temperature—and its wider effects on Earth's climate system. Climate change in a broader sense also includes previous long-term changes to Earth's climate. The modern-day rise in global temperatures is driven by human activities, especially fossil fuel (coal, oil and natural gas) burning since the Industrial Revolution. Fossil fuel use, deforestation, and some agricultural and industrial practices release greenhouse gases. These gases absorb some of the heat that the Earth radiates after it warms from sunlight, warming the lower atmosphere. Carbon dioxide, the primary gas driving global warming, has increased in concentration by about 50% since the pre-industrial era to levels not seen for millions of years.

Climate change has an increasingly large impact on the environment. Deserts are expanding, while heat waves and wildfires are becoming more common. Amplified warming in the Arctic has contributed to thawing permafrost, retreat of glaciers and sea ice decline. Higher temperatures are also causing more intense storms, droughts, and other weather extremes. Rapid environmental change in mountains, coral reefs, and the Arctic is forcing many species to relocate or become extinct. Even if efforts to minimize future warming are successful, some effects will continue for centuries. These include ocean heating, ocean acidification and sea level rise.

Climate change threatens people with increased flooding, extreme heat, increased food and water scarcity, more disease, and economic lossHuman migration and conflict can also be a result. The World Health Organization calls climate change one of the biggest threats to global health in the 21st century. Societies and ecosystems will experience more severe risks without action to limit warmingAdapting to climate change through efforts like flood control measures or drought-resistant crops partially reduces climate change risks, although some limits to adaptation have already been reached. Poorer communities are responsible for a small share of global emissions, yet have the least ability to adapt and are most vulnerable to climate change.

Bobcat Fire in Monrovia, CA, September 10, 2020
Bleached colony of Acropora coral
A dry lakebed in California, which is experiencing its worst megadrought in 1,200 years.[19]
Examples of some effects of climate change: Wildfire intensified by heat and drought, bleaching of corals occurring more often due to marine heatwaves, and worsening droughts compromising water supplies.

Many climate change impacts have been observed in the first decades of the 21st century, with 2024 the warmest on record at +1.60 °C (2.88 °F) since regular tracking began in 1850. Additional warming will increase these impacts and can trigger tipping points, such as melting all of the Greenland ice sheet. Under the 2015 Paris Agreement, nations collectively agreed to keep warming "well under 2 °C". However, with pledges made under the Agreement, global warming would still reach about 2.8 °C (5.0 °F) by the end of the century.

There is widespread support for climate action worldwide, and most countries aim to stop emitting carbon dioxideFossil fuels can be phased out by stopping subsidising them, conserving energy and switching to energy sources that do not produce significant carbon pollution. These energy sources include wind, solar, hydro, and nuclear power. Cleanly generated electricity can replace fossil fuels for powering transportation, heating buildings, and running industrial processes. Carbon can also be removed from the atmosphere, for instance by increasing forest cover and farming with methods that store carbon in soil.

Terminology

Before the 1980s, it was unclear whether the warming effect of increased greenhouse gases was stronger than the cooling effect of airborne particulates in air pollution. Scientists used the term inadvertent climate modification to refer to human impacts on the climate at this time. In the 1980s, the terms global warming and climate change became more common, often being used interchangeably. Scientifically, global warming refers only to increased global average surface temperature, while climate change describes both global warming and its effects on Earth's climate system, such as precipitation changes.

Climate change can also be used more broadly to include changes to the climate that have happened throughout Earth's history. Global warming—used as early as 1975—became the more popular term after NASA climate scientist James Hansen used it in his 1988 testimony in the U.S. Senate. Since the 2000s, usage of climate change has increased. Various scientists, politicians and media may use the terms climate crisis or climate emergency to talk about climate change, and may use the term global heating instead of global warming.

Global temperature rise

Temperatures prior to present-day global warming

Global surface temperature reconstruction over the past 2000 years using proxy data from tree rings, corals, and ice cores in blue. Directly observed data is in red.

Over the last few million years the climate cycled through ice ages. One of the hotter periods was the Last Interglacial, around 125,000 years ago, where temperatures were between 0.5 °C and 1.5 °C warmer than before the start of global warming. This period saw sea levels 5 to 10 metres higher than today. The most recent glacial maximum 20,000 years ago was some 5–7 °C colder. This period has sea levels that were over 125 metres (410 ft) lower than today.

Temperatures stabilized in the current interglacial period beginning 11,700 years ago. This period also saw the start of agriculture. Historical patterns of warming and cooling, like the Medieval Warm Period and the Little Ice Age, did not occur at the same time across different regions. Temperatures may have reached as high as those of the late 20th century in a limited set of regions. Climate information for that period comes from climate proxies, such as trees and ice cores.

Warming since the Industrial Revolution

In recent decades, new high temperature records have substantially outpaced new low temperature records on a growing portion of Earth's surface.
There has been an increase in ocean heat content during recent decades as the oceans absorb over 90% of the heat from global warming.

Around 1850 thermometer records began to provide global coverage. Between the 18th century and 1970 there was little net warming, as the warming impact of greenhouse gas emissions was offset by cooling from sulfur dioxide emissions. Sulfur dioxide causes acid rain, but it also produces sulfate aerosols in the atmosphere, which reflect sunlight and cause global dimming. After 1970, the increasing accumulation of greenhouse gases and controls on sulfur pollution led to a marked increase in temperature.

Ongoing changes in climate have had no precedent for several thousand years. Multiple datasets all show worldwide increases in surface temperature, at a rate of around 0.2 °C per decade. The 2014–2023 decade warmed to an average 1.19 °C [1.06–1.30 °C] compared to the pre-industrial baseline (1850–1900). Not every single year was warmer than the last: internal climate variability processes can make any year 0.2 °C warmer or colder than the average. From 1998 to 2013, negative phases of two such processes, Pacific Decadal Oscillation (PDO) and Atlantic Multidecadal Oscillation (AMO) caused a short slower period of warming called the "global warming hiatus". After the "hiatus", the opposite occurred, with 2024 well above the recent average at more than +1.5 °C. This is why the temperature change is defined in terms of a 20-year average, which reduces the noise of hot and cold years and decadal climate patterns, and detects the long-term signal.

A wide range of other observations reinforce the evidence of warming. The upper atmosphere is cooling, because greenhouse gases are trapping heat near the Earth's surface, and so less heat is radiating into space. Warming reduces average snow cover and forces the retreat of glaciers. At the same time, warming also causes greater evaporation from the oceans, leading to more atmospheric humidity, more and heavier precipitation. Plants are flowering earlier in spring, and thousands of animal species have been permanently moving to cooler areas.

Differences by region

Different regions of the world warm at different rates. The pattern is independent of where greenhouse gases are emitted, because the gases persist long enough to diffuse across the planet. Since the pre-industrial period, the average surface temperature over land regions has increased almost twice as fast as the global average surface temperature. This is because oceans lose more heat by evaporation and oceans can store a lot of heat. The thermal energy in the global climate system has grown with only brief pauses since at least 1970, and over 90% of this extra energy has been stored in the ocean. The rest has heated the atmosphere, melted ice, and warmed the continents.

The Northern Hemisphere and the North Pole have warmed much faster than the South Pole and Southern Hemisphere. The Northern Hemisphere not only has much more land, but also more seasonal snow cover and sea ice. As these surfaces flip from reflecting a lot of light to being dark after the ice has melted, they start absorbing more heat. Local black carbon deposits on snow and ice also contribute to Arctic warming. Arctic surface temperatures are increasing between three and four times faster than in the rest of the world. Melting of ice sheets near the poles weakens both the Atlantic and the Antarctic limb of thermohaline circulation, which further changes the distribution of heat and precipitation around the globe.

Future global temperatures

CMIP6 multi-model projections of global surface temperature changes for the year 2090 relative to the 1850–1900 average. The current trajectory for warming by the end of the century is roughly halfway between these two extremes.

The World Meteorological Organization estimates there is almost a 50% chance of the five-year average global temperature exceeding +1.5 °C between 2024 and 2028. The IPCC expects the 20-year average to exceed +1.5 °C in the early 2030s.

The IPCC Sixth Assessment Report (2021) included projections that by 2100 global warming is very likely to reach 1.0–1.8 °C under a scenario with very low emissions of greenhouse gases, 2.1–3.5 °C under an intermediate emissions scenario, or 3.3–5.7 °C under a very high emissions scenario. The warming will continue past 2100 in the intermediate and high emission scenarios, with future projections of global surface temperatures by year 2300 being similar to millions of years ago.

The remaining carbon budget for staying beneath certain temperature increases is determined by modelling the carbon cycle and climate sensitivity to greenhouse gases. According to UNEP, global warming can be kept below 2.0 °C with a 50% chance if emissions after 2023 do not exceed 900 gigatonnes of CO2. This carbon budget corresponds to around 16 years of current emissions.

Causes of recent global temperature rise

Physical drivers of global warming that has happened so far. Future global warming potential for long lived drivers like carbon dioxide emissions is not represented. Whiskers on each bar show the possible error range.

The climate system experiences various cycles on its own which can last for years, decades or even centuries. For example, El Niño events cause short-term spikes in surface temperature while La Niña events cause short term cooling. Their relative frequency can affect global temperature trends on a decadal timescale. Other changes are caused by an imbalance of energy from external forcings. Examples of these include changes in the concentrations of greenhouse gases, solar luminosity, volcanic eruptions, and variations in the Earth's orbit around the Sun.

To determine the human contribution to climate change, unique "fingerprints" for all potential causes are developed and compared with both observed patterns and known internal climate variability. For example, solar forcing—whose fingerprint involves warming the entire atmosphere—is ruled out because only the lower atmosphere has warmed. Atmospheric aerosols produce a smaller, cooling effect. Other drivers, such as changes in albedo, are less impactful.

Greenhouse gases

CO2 concentrations over the last 800,000 years as measured from ice cores (blue/green) and directly (black)

Greenhouse gases are transparent to sunlight, and thus allow it to pass through the atmosphere to heat the Earth's surface. The Earth radiates it as heat, and greenhouse gases absorb a portion of it. This absorption slows the rate at which heat escapes into space, trapping heat near the Earth's surface and warming it over time.

While water vapour (≈50%) and clouds (≈25%) are the biggest contributors to the greenhouse effect, they primarily change as a function of temperature and are therefore mostly considered to be feedbacks that change climate sensitivity. On the other hand, concentrations of gases such as CO2 (≈20%), tropospheric ozoneCFCs and nitrous oxide are added or removed independently from temperature, and are therefore considered to be external forcings that change global temperatures.

Before the Industrial Revolution, naturally occurring amounts of greenhouse gases caused the air near the surface to be about 33 °C warmer than it would have been in their absence. Human activity since the Industrial Revolution, mainly extracting and burning fossil fuels (coal, oil, and natural gas), has increased the amount of greenhouse gases in the atmosphere. In 2022, the concentrations of CO2 and methane had increased by about 50% and 164%, respectively, since 1750. These CO2 levels are higher than they have been at any time during the last 14 million years. Concentrations of methane are far higher than they were over the last 800,000 years.

The Global Carbon Project shows how additions to CO2 since 1880 have been caused by different sources ramping up one after another.

Global human-caused greenhouse gas emissions in 2019 were equivalent to 59 billion tonnes of CO2. Of these emissions, 75% was CO2, 18% was methane, 4% was nitrous oxide, and 2% was fluorinated gases. CO2 emissions primarily come from burning fossil fuels to provide energy for transport, manufacturing, heating, and electricity. Additional CO2 emissions come from deforestation and industrial processes, which include the CO2 released by the chemical reactions for making cement, steel, aluminium, and fertilizer. Methane emissions come from livestock, manure, rice cultivation, landfills, wastewater, and coal mining, as well as oil and gas extraction. Nitrous oxide emissions largely come from the microbial decomposition of fertilizer.

While methane only lasts in the atmosphere for an average of 12 years, CO2 lasts much longer. The Earth's surface absorbs CO2 as part of the carbon cycle. While plants on land and in the ocean absorb most excess emissions of CO2 every year, that CO2 is returned to the atmosphere when biological matter is digested, burns, or decays. Land-surface carbon sink processes, such as carbon fixation in the soil and photosynthesis, remove about 29% of annual global CO2 emissions. The ocean has absorbed 20 to 30% of emitted CO2 over the last two decades. CO2 is only removed from the atmosphere for the long term when it is stored in the Earth's crust, which is a process that can take millions of years to complete.

Land surface changes

The rate of global tree cover loss has approximately doubled since 2001, to an annual loss approaching an area the size of Italy.

Around 30% of Earth's land area is largely unusable for humans (glaciers, deserts, etc.), 26% is forests, 10% is shrubland and 34% is agricultural landDeforestation is the main land use change contributor to global warming, as the destroyed trees release CO2, and are not replaced by new trees, removing that carbon sink. Between 2001 and 2018, 27% of deforestation was from permanent clearing to enable agricultural expansion for crops and livestock. Another 24% has been lost to temporary clearing under the shifting cultivation agricultural systems. 26% was due to logging for wood and derived products, and wildfires have accounted for the remaining 23%. Some forests have not been fully cleared, but were already degraded by these impacts. Restoring these forests also recovers their potential as a carbon sink.

Local vegetation cover impacts how much of the sunlight gets reflected back into space (albedo), and how much heat is lost by evaporation. For instance, the change from a dark forest to grassland makes the surface lighter, causing it to reflect more sunlight. Deforestation can also modify the release of chemical compounds that influence clouds, and by changing wind patterns. In tropic and temperate areas the net effect is to produce significant warming, and forest restoration can make local temperatures cooler. At latitudes closer to the poles, there is a cooling effect as forest is replaced by snow-covered (and more reflective) plains. Globally, these increases in surface albedo have been the dominant direct influence on temperature from land use change. Thus, land use change to date is estimated to have a slight cooling effect.

Other factors

Aerosols and clouds

Air pollution, in the form of aerosols, affects the climate on a large scale. Aerosols scatter and absorb solar radiation. From 1961 to 1990, a gradual reduction in the amount of sunlight reaching the Earth's surface was observed. This phenomenon is popularly known as global dimming, and is primarily attributed to sulfate aerosols produced by the combustion of fossil fuels with heavy sulfur concentrations like coal and bunker fuel. Smaller contributions come from black carbon (from combustion of fossil fuels and biomass), and from dust. Globally, aerosols have been declining since 1990 due to pollution controls, meaning that they no longer mask greenhouse gas warming as much.

Aerosols also have indirect effects on the Earth's energy budget. Sulfate aerosols act as cloud condensation nuclei and lead to clouds that have more and smaller cloud droplets. These clouds reflect solar radiation more efficiently than clouds with fewer and larger droplets. They also reduce the growth of raindrops, which makes clouds more reflective to incoming sunlight. Indirect effects of aerosols are the largest uncertainty in radiative forcing.

While aerosols typically limit global warming by reflecting sunlight, black carbon in soot that falls on snow or ice can contribute to global warming. Not only does this increase the absorption of sunlight, it also increases melting and sea-level rise. Limiting new black carbon deposits in the Arctic could reduce global warming by 0.2 °C by 2050. The effect of decreasing sulfur content of fuel oil for ships since 2020 is estimated to cause an additional 0.05 °C increase in global mean temperature by 2050.

Solar and volcanic activity

The Fourth National Climate Assessment ("NCA4", USGCRP, 2017) includes charts illustrating that neither solar nor volcanic activity can explain the observed warming.

As the Sun is the Earth's primary energy source, changes in incoming sunlight directly affect the climate systemSolar irradiance has been measured directly by satellites, and indirect measurements are available from the early 1600s onwards. Since 1880, there has been no upward trend in the amount of the Sun's energy reaching the Earth, in contrast to the warming of the lower atmosphere (the troposphere). The upper atmosphere (the stratosphere) would also be warming if the Sun was sending more energy to Earth, but instead, it has been cooling. This is consistent with greenhouse gases preventing heat from leaving the Earth's atmosphere.

Explosive volcanic eruptions can release gases, dust and ash that partially block sunlight and reduce temperatures, or they can send water vapour into the atmosphere, which adds to greenhouse gases and increases temperatures. These impacts on temperature only last for several years, because both water vapour and volcanic material have low persistence in the atmosphere. volcanic CO2 emissions are more persistent, but they are equivalent to less than 1% of current human-caused CO2 emissions. Volcanic activity still represents the single largest natural impact (forcing) on temperature in the industrial era. Yet, like the other natural forcings, it has had negligible impacts on global temperature trends since the Industrial Revolution.

Climate change feedbacks

Sea ice reflects 50% to 70% of incoming sunlight, while the ocean, being darker, reflects only 6%. As an area of sea ice melts and exposes more ocean, more heat is absorbed by the ocean, raising temperatures that melt still more ice. This is a positive feedback process.

The climate system's response to an initial forcing is shaped by feedbacks, which either amplify or dampen the change. Self-reinforcing or positive feedbacks increase the response, while balancing or negative feedbacks reduce it. The main reinforcing feedbacks are the water-vapour feedback, the ice–albedo feedback, and the net cloud feedback. The primary balancing mechanism is radiative cooling, as Earth's surface gives off more heat to space in response to rising temperature. In addition to temperature feedbacks, there are feedbacks in the carbon cycle, such as the fertilizing effect of CO2 on plant growth. Feedbacks are expected to trend in a positive direction as greenhouse gas emissions continue, raising climate sensitivity.

These feedback processes alter the pace of global warming. For instance, warmer air can hold more moisture in the form of water vapour, which is itself a potent greenhouse gas. Warmer air can also make clouds higher and thinner, and therefore more insulating, increasing climate warming. The reduction of snow cover and sea ice in the Arctic is another major feedback, this reduces the reflectivity of the Earth's surface in the region and accelerates Arctic warming. This additional warming also contributes to permafrost thawing, which releases methane and CO2 into the atmosphere.

Around half of human-caused CO2 emissions have been absorbed by land plants and by the oceans. This fraction is not static and if future CO2 emissions decrease, the Earth will be able to absorb up to around 70%. If they increase substantially, it'll still absorb more carbon than now, but the overall fraction will decrease to below 40%. This is because climate change increases droughts and heat waves that eventually inhibit plant growth on land, and soils will release more carbon from dead plants when they are warmer. The rate at which oceans absorb atmospheric carbon will be lowered as they become more acidic and experience changes in thermohaline circulation and phytoplankton distribution. Uncertainty over feedbacks, particularly cloud cover, is the major reason why different climate models project different magnitudes of warming for a given amount of emissions.

Modelling

Energy flows between space, the atmosphere, and Earth's surface. Most sunlight passes through the atmosphere to heat the Earth's surface, then greenhouse gases absorb most of the heat the Earth radiates in response. Adding to greenhouse gases increases this insulating effect, causing an energy imbalance that heats the planet up.

A climate model is a representation of the physical, chemical and biological processes that affect the climate system. Models include natural processes like changes in the Earth's orbit, historical changes in the Sun's activity, and volcanic forcing. Models are used to estimate the degree of warming future emissions will cause when accounting for the strength of climate feedbacks. Models also predict the circulation of the oceans, the annual cycle of the seasons, and the flows of carbon between the land surface and the atmosphere.

The physical realism of models is tested by examining their ability to simulate current or past climates. Past models have underestimated the rate of Arctic shrinkage and underestimated the rate of precipitation increase. Sea level rise since 1990 was underestimated in older models, but more recent models agree well with observations. The 2017 United States-published National Climate Assessment notes that "climate models may still be underestimating or missing relevant feedback processes". Additionally, climate models may be unable to adequately predict short-term regional climatic shifts.

A subset of climate models add societal factors to a physical climate model. These models simulate how population, economic growth, and energy use affect—and interact with—the physical climate. With this information, these models can produce scenarios of future greenhouse gas emissions. This is then used as input for physical climate models and carbon cycle models to predict how atmospheric concentrations of greenhouse gases might change. Depending on the socioeconomic scenario and the mitigation scenario, models produce atmospheric CO2 concentrations that range widely between 380 and 1400 ppm.

Impacts

In virtually all countries and territories around the world, scientists in the field of extreme event attribution have concluded that human-caused global warming has increased the number of days of extreme heat events over long-term norms.

Environmental effects

The environmental effects of climate change are broad and far-reaching, affecting oceans, ice, and weather. Changes may occur gradually or rapidly. Evidence for these effects comes from studying climate change in the past, from modelling, and from modern observations. Since the 1950s, droughts and heat waves have appeared simultaneously with increasing frequency. Extremely wet or dry events within the monsoon period have increased in India and East Asia. Monsoonal precipitation over the Northern Hemisphere has increased since 1980. The rainfall rate and intensity of hurricanes and typhoons is likely increasing, and the geographic range likely expanding poleward in response to climate warming. The frequency of tropical cyclones has not increased as a result of climate change.

Historical sea level reconstruction and projections up to 2100 published in 2017 by the U.S. Global Change Research Program

Global sea level is rising as a consequence of thermal expansion and the melting of glaciers and ice sheets. Sea level rise has increased over time, reaching 4.8 cm per decade between 2014 and 2023. Over the 21st century, the IPCC projects 32–62 cm of sea level rise under a low emission scenario, 44–76 cm under an intermediate one and 65–101 cm under a very high emission scenario. Marine ice sheet instability processes in Antarctica may add substantially to these values, including the possibility of a 2-meter sea level rise by 2100 under high emissions.

Climate change has led to decades of shrinking and thinning of the Arctic sea ice. While ice-free summers are expected to be rare at 1.5 °C degrees of warming, they are set to occur once every three to ten years at a warming level of 2 °C. Higher atmospheric CO2 concentrations cause more CO2 to dissolve in the oceans, which is making them more acidic. Because oxygen is less soluble in warmer water, its concentrations in the ocean are decreasing, and dead zones are expanding.

Tipping points and long-term impacts

Different levels of global warming may cause different parts of Earth's climate system to reach tipping points that cause transitions to different states.

Greater degrees of global warming increase the risk of passing through 'tipping points'—thresholds beyond which certain major impacts can no longer be avoided even if temperatures return to their previous state. For instance, the Greenland ice sheet is already melting, but if global warming reaches levels between 1.7 °C and 2.3 °C, its melting will continue until it fully disappears. If the warming is later reduced to 1.5 °C or less, it will still lose a lot more ice than if the warming was never allowed to reach the threshold in the first place. While the ice sheets would melt over millennia, other tipping points would occur faster and give societies less time to respond. The collapse of major ocean currents like the Atlantic meridional overturning circulation (AMOC), and irreversible damage to key ecosystems like the Amazon rainforest and coral reefs can unfold in a matter of decades. The collapse of the AMOC would be a severe climate catastrophe, resulting in a cooling of the Northern Hemisphere.

The long-term effects of climate change on oceans include further ice melt, ocean warming, sea level rise, ocean acidification and ocean deoxygenation. The timescale of long-term impacts are centuries to millennia due to CO2's long atmospheric lifetime. The result is an estimated total sea level rise of 2.3 metres per degree Celsius (4.2 ft/°F) after 2000 years. Oceanic CO2 uptake is slow enough that ocean acidification will also continue for hundreds to thousands of years. Deep oceans (below 2,000 metres (6,600 ft)) are also already committed to losing over 10% of their dissolved oxygen by the warming which occurred to date. Further, the West Antarctic ice sheet appears committed to practically irreversible melting, which would increase the sea levels by at least 3.3 m (10 ft 10 in) over approximately 2000 years.

Nature and wildlife

Recent warming has driven many terrestrial and freshwater species poleward and towards higher altitudes. For instance, the range of hundreds of North American birds has shifted northward at an average rate of 1.5 km/year over the past 55 years. Higher atmospheric CO2 levels and an extended growing season have resulted in global greening. However, heatwaves and drought have reduced ecosystem productivity in some regions. The future balance of these opposing effects is unclear. A related phenomenon driven by climate change is woody plant encroachment, affecting up to 500 million hectares globally. Climate change has contributed to the expansion of drier climate zones, such as the expansion of deserts in the subtropics. The size and speed of global warming is making abrupt changes in ecosystems more likely. Overall, it is expected that climate change will result in the extinction of many species.

The oceans have heated more slowly than the land, but plants and animals in the ocean have migrated towards the colder poles faster than species on land. Just as on land, heat waves in the ocean occur more frequently due to climate change, harming a wide range of organisms such as corals, kelp, and seabirds. Ocean acidification makes it harder for marine calcifying organisms such as mussels, barnacles and corals to produce shells and skeletons; and heatwaves have bleached coral reefsHarmful algal blooms enhanced by climate change and eutrophication lower oxygen levels, disrupt food webs and cause great loss of marine life. Coastal ecosystems are under particular stress. Almost half of global wetlands have disappeared due to climate change and other human impacts. Plants have come under increased stress from damage by insects.

Climate change impacts on the environment

Humans

Extreme weather will be progressively more common as the Earth warms.

The effects of climate change are impacting humans everywhere in the world. Impacts can be observed on all continents and ocean regions, with low-latitude, less developed areas facing the greatest risk. Continued warming has potentially "severe, pervasive and irreversible impacts" for people and ecosystems. The risks are unevenly distributed, but are generally greater for disadvantaged people in developing and developed countries.

Health and food

The World Health Organization calls climate change one of the biggest threats to global health in the 21st century. Scientists have warned about the irreversible harms it poses. Extreme weather events affect public health, and food and water securityTemperature extremes lead to increased illness and death. Climate change increases the intensity and frequency of extreme weather events. It can affect transmission of infectious diseases, such as dengue fever and malaria. According to the World Economic Forum, 14.5 million more deaths are expected due to climate change by 2050. 30% of the global population currently live in areas where extreme heat and humidity are already associated with excess deaths. By 2100, 50% to 75% of the global population would live in such areas.

While total crop yields have been increasing in the past 50 years due to agricultural improvements, climate change has already decreased the rate of yield growthFisheries have been negatively affected in multiple regions. While agricultural productivity has been positively affected in some high latitude areas, mid- and low-latitude areas have been negatively affected. According to the World Economic Forum, an increase in drought in certain regions could cause 3.2 million deaths from malnutrition by 2050 and stunting in children. With 2 °C warming, global livestock headcounts could decline by 7–10% by 2050, as less animal feed will be available. If the emissions continue to increase for the rest of century, then over 9 million climate-related deaths would occur annually by 2100.

Livelihoods and inequality

Economic damages due to climate change may be severe and there is a chance of disastrous consequences. Severe impacts are expected in South-East Asia and sub-Saharan Africa, where most of the local inhabitants are dependent upon natural and agricultural resources. Heat stress can prevent outdoor labourers from working. If warming reaches 4 °C then labour capacity in those regions could be reduced by 30 to 50%. The World Bank estimates that between 2016 and 2030, climate change could drive over 120 million people into extreme poverty without adaptation.

Inequalities based on wealth and social status have worsened due to climate change. Major difficulties in mitigating, adapting to, and recovering from climate shocks are faced by marginalized people who have less control over resources. Indigenous people, who are subsistent on their land and ecosystems, will face endangerment to their wellness and lifestyles due to climate change. An expert elicitation concluded that the role of climate change in armed conflict has been small compared to factors such as socio-economic inequality and state capabilities.

While women are not inherently more at risk from climate change and shocks, limits on women's resources and discriminatory gender norms constrain their adaptive capacity and resilience. For example, women's work burdens, including hours worked in agriculture, tend to decline less than men's during climate shocks such as heat stress.

Climate migration

Low-lying islands and coastal communities are threatened by sea level rise, which makes urban flooding more common. Sometimes, land is permanently lost to the sea. This could lead to statelessness for people in island nations, such as the Maldives and Tuvalu. In some regions, the rise in temperature and humidity may be too severe for humans to adapt to. With worst-case climate change, models project that areas almost one-third of humanity live in might become Sahara-like uninhabitable and extremely hot climates.

These factors can drive climate or environmental migration, within and between countries. More people are expected to be displaced because of sea level rise, extreme weather and conflict from increased competition over natural resources. Climate change may also increase vulnerability, leading to "trapped populations" who are not able to move due to a lack of resources.

Climate change impacts on people

Reducing and recapturing emissions

Global greenhouse gas emission scenarios, based on policies and pledges as of November 2021

Climate change can be mitigated by reducing the rate at which greenhouse gases are emitted into the atmosphere, and by increasing the rate at which carbon dioxide is removed from the atmosphere. To limit global warming to less than 2 °C global greenhouse gas emissions need to be net-zero by 2070. This requires far-reaching, systemic changes on an unprecedented scale in energy, land, cities, transport, buildings, and industry.

The United Nations Environment Programme estimates that countries need to triple their pledges under the Paris Agreement within the next decade to limit global warming to 2 °C. With pledges made under the Paris Agreement as of 2024, there would be a 66% chance that global warming is kept under 2.8 °C by the end of the century (range: 1.9–3.7 °C, depending on exact implementation and technological progress). When only considering current policies, this raises to 3.1 °C. Globally, limiting warming to 2 °C may result in higher economic benefits than economic costs.

Although there is no single pathway to limit global warming to 2 °C, most scenarios and strategies see a major increase in the use of renewable energy in combination with increased energy efficiency measures to generate the needed greenhouse gas reductions. To reduce pressures on ecosystems and enhance their carbon sequestration capabilities, changes would also be necessary in agriculture and forestry, such as preventing deforestation and restoring natural ecosystems by reforestation.

Other approaches to mitigating climate change have a higher level of risk. Scenarios that limit global warming to 1.5 °C typically project the large-scale use of carbon dioxide removal methods over the 21st century. There are concerns, though, about over-reliance on these technologies, and environmental impacts.

Solar radiation modification (SRM) is a proposal for reducing global warming by reflecting some sunlight away from Earth and back into space. Because it does not reduce greenhouse gas concentrations, it would not address ocean acidification and is not considered mitigation. SRM should be considered only as a supplement to mitigation, not a replacement for it, due to risks such as rapid warming if it were abruptly stopped and not restarted. The most-studied approach is stratospheric aerosol injection. SRM could reduce global warming and some of its impacts, though imperfectly. It poses environmental risks, such as changes to rainfall patterns, as well as political challenges, such as who would decide whether to use it.

Clean energy

Coal, oil, and natural gas remain the primary global energy sources even as renewables have begun rapidly increasing.
Wind and solar power, Germany

Renewable energy is key to limiting climate change. For decades, fossil fuels have accounted for roughly 80% of the world's energy use. The remaining share has been split between nuclear power and renewables (including hydropower, bioenergy, wind and solar power and geothermal energy). Fossil fuel use is expected to peak in absolute terms prior to 2030 and then to decline, with coal use experiencing the sharpest reductions. Renewables represented 86% of all new electricity generation installed in 2023. Other forms of clean energy, such as nuclear and hydropower, currently have a larger share of the energy supply. However, their future growth forecasts appear limited in comparison.

While solar panels and onshore wind are now among the cheapest forms of adding new power generation capacity in many locations, green energy policies are needed to achieve a rapid transition from fossil fuels to renewables. To achieve carbon neutrality by 2050, renewable energy would become the dominant form of electricity generation, rising to 85% or more by 2050 in some scenarios. Investment in coal would be eliminated and coal use nearly phased out by 2050.

Electricity generated from renewable sources would also need to become the main energy source for heating and transport. Transport can switch away from internal combustion engine vehicles and towards electric vehicles, public transit, and active transport (cycling and walking). For shipping and flying, low-carbon fuels would reduce emissions. Heating could be increasingly decarbonized with technologies like heat pumps.

There are obstacles to the continued rapid growth of clean energy, including renewables. Wind and solar produce energy intermittently and with seasonal variability. Traditionally, hydro dams with reservoirs and fossil fuel power plants have been used when variable energy production is low. Going forward, battery storage can be expanded, energy demand and supply can be matched, and long-distance transmission can smooth variability of renewable outputs. Bioenergy is often not carbon-neutral and may have negative consequences for food security. The growth of nuclear power is constrained by controversy around radioactive waste, nuclear weapon proliferation, and accidents. Hydropower growth is limited by the fact that the best sites have been developed, and new projects are confronting increased social and environmental concerns.

Low-carbon energy improves human health by minimizing climate change as well as reducing air pollution deaths, which were estimated at 7 million annually in 2016. Meeting the Paris Agreement goals that limit warming to a 2 °C increase could save about a million of those lives per year by 2050, whereas limiting global warming to 1.5 °C could save millions and simultaneously increase energy security and reduce poverty. Improving air quality also has economic benefits which may be larger than mitigation costs.

Energy conservation

Reducing energy demand is another major aspect of reducing emissions. If less energy is needed, there is more flexibility for clean energy development. It also makes it easier to manage the electricity grid, and minimizes carbon-intensive infrastructure development. Major increases in energy efficiency investment will be required to achieve climate goals, comparable to the level of investment in renewable energy. Several COVID-19 related changes in energy use patterns, energy efficiency investments, and funding have made forecasts for this decade more difficult and uncertain.

Strategies to reduce energy demand vary by sector. In the transport sector, passengers and freight can switch to more efficient travel modes, such as buses and trains, or use electric vehicles. Industrial strategies to reduce energy demand include improving heating systems and motors, designing less energy-intensive products, and increasing product lifetimes. In the building sector the focus is on better design of new buildings, and higher levels of energy efficiency in retrofitting. The use of technologies like heat pumps can also increase building energy efficiency.

Agriculture and industry

Taking into account direct and indirect emissions, industry is the sector with the highest share of global emissions. Data as of 2019 from the IPCC.

Agriculture and forestry face a triple challenge of limiting greenhouse gas emissions, preventing the further conversion of forests to agricultural land, and meeting increases in world food demand. A set of actions could reduce agriculture and forestry-based emissions by two-thirds from 2010 levels. These include reducing growth in demand for food and other agricultural products, increasing land productivity, protecting and restoring forests, and reducing greenhouse gas emissions from agricultural production.

On the demand side, a key component of reducing emissions is shifting people towards plant-based diets. Eliminating the production of livestock for meat and dairy would eliminate about 3/4ths of all emissions from agriculture and other land use. Livestock also occupy 37% of ice-free land area on Earth and consume feed from the 12% of land area used for crops, driving deforestation and land degradation.

Steel and cement production are responsible for about 13% of industrial CO2 emissions. In these industries, carbon-intensive materials such as coke and lime play an integral role in the production, so that reducing CO2 emissions requires research into alternative chemistries. Where energy production or CO2-intensive heavy industries continue to produce waste CO2, technology can sometimes be used to capture and store most of the gas instead of releasing it to the atmosphere. This technology, carbon capture and storage (CCS), could have a critical but limited role in reducing emissions. It is relatively expensive and has been deployed only to an extent that removes around 0.1% of annual greenhouse gas emissions.

Carbon dioxide removal

Most CO2 emissions have been absorbed by carbon sinks, including plant growth, soil uptake, and ocean uptake (2020 Global Carbon Budget).

Natural carbon sinks can be enhanced to sequester significantly larger amounts of CO2 beyond naturally occurring levels. Reforestation and afforestation (planting forests where there were none before) are among the most mature sequestration techniques, although the latter raises food security concerns. Farmers can promote sequestration of carbon in soils through practices such as use of winter cover crops, reducing the intensity and frequency of tillage, and using compost and manure as soil amendments. Forest and landscape restoration yields many benefits for the climate, including greenhouse gas emissions sequestration and reduction. Restoration/recreation of coastal wetlands, prairie plots and seagrass meadows increases the uptake of carbon into organic matter. When carbon is sequestered in soils and in organic matter such as trees, there is a risk of the carbon being re-released into the atmosphere later through changes in land use, fire, or other changes in ecosystems.

The use of bioenergy in conjunction with carbon capture and storage (BECCS) can result in net negative emissions as CO2 is drawn from the atmosphere. It remains highly uncertain whether carbon dioxide removal techniques will be able to play a large role in limiting warming to 1.5 °C. Policy decisions that rely on carbon dioxide removal increase the risk of global warming rising beyond international goals.

Adaptation

Adaptation is "the process of adjustment to current or expected changes in climate and its effects". Without additional mitigation, adaptation cannot avert the risk of "severe, widespread and irreversible" impacts. More severe climate change requires more transformative adaptation, which can be prohibitively expensive. The capacity and potential for humans to adapt is unevenly distributed across different regions and populations, and developing countries generally have less. The first two decades of the 21st century saw an increase in adaptive capacity in most low- and middle-income countries with improved access to basic sanitation and electricity, but progress is slow. Many countries have implemented adaptation policies. However, there is a considerable gap between necessary and available finance.

Adaptation to sea level rise consists of avoiding at-risk areas, learning to live with increased flooding, and building flood controls. If that fails, managed retreat may be needed. There are economic barriers for tackling dangerous heat impact. Avoiding strenuous work or having air conditioning is not possible for everybody. In agriculture, adaptation options include a switch to more sustainable diets, diversification, erosion control, and genetic improvements for increased tolerance to a changing climate. Insurance allows for risk-sharing, but is often difficult to get for people on lower incomes. Education, migration and early warning systems can reduce climate vulnerability. Planting mangroves or encouraging other coastal vegetation can buffer storms.

Ecosystems adapt to climate change, a process that can be supported by human intervention. By increasing connectivity between ecosystems, species can migrate to more favourable climate conditions. Species can also be introduced to areas acquiring a favourable climate. Protection and restoration of natural and semi-natural areas helps build resilience, making it easier for ecosystems to adapt. Many of the actions that promote adaptation in ecosystems, also help humans adapt via ecosystem-based adaptation. For instance, restoration of natural fire regimes makes catastrophic fires less likely, and reduces human exposure. Giving rivers more space allows for more water storage in the natural system, reducing flood risk. Restored forest acts as a carbon sink, but planting trees in unsuitable regions can exacerbate climate impacts.

There are synergies but also trade-offs between adaptation and mitigation. An example for synergy is increased food productivity, which has large benefits for both adaptation and mitigation. An example of a trade-off is that increased use of air conditioning allows people to better cope with heat, but increases energy demand. Another trade-off example is that more compact urban development may reduce emissions from transport and construction, but may also increase the urban heat island effect, exposing people to heat-related health risks.

Examples of adaptation methods

Policies and politics

The Climate Change Performance Index ranks countries by greenhouse gas emissions (40% of score), renewable energy (20%), energy use (20%), and climate policy (20%).
  High
  Medium
  Low
  Very low
  No data

Countries that are most vulnerable to climate change have typically been responsible for a small share of global emissions. This raises questions about justice and fairness. Limiting global warming makes it much easier to achieve the UN's Sustainable Development Goals, such as eradicating poverty and reducing inequalities. The connection is recognized in Sustainable Development Goal 13 which is to "take urgent action to combat climate change and its impacts". The goals on food, clean water and ecosystem protection have synergies with climate mitigation.

The geopolitics of climate change is complex. It has often been framed as a free-rider problem, in which all countries benefit from mitigation done by other countries, but individual countries would lose from switching to a low-carbon economy themselves. Sometimes mitigation also has localized benefits though. For instance, the benefits of a coal phase-out to public health and local environments exceed the costs in almost all regions. Furthermore, net importers of fossil fuels win economically from switching to clean energy, causing net exporters to face stranded assets: fossil fuels they cannot sell.

Policy options

A wide range of policies, regulations, and laws are being used to reduce emissions. As of 2019, carbon pricing covers about 20% of global greenhouse gas emissions. Carbon can be priced with carbon taxes and emissions trading systems. Direct global fossil fuel subsidies reached $319 billion in 2017, and $5.2 trillion when indirect costs such as air pollution are priced in. Ending these can cause a 28% reduction in global carbon emissions and a 46% reduction in air pollution deaths. Money saved on fossil subsidies could be used to support the transition to clean energy instead. More direct methods to reduce greenhouse gases include vehicle efficiency standards, renewable fuel standards, and air pollution regulations on heavy industry. Several countries require utilities to increase the share of renewables in power production. A global carbon market coalition proposed at COP30 (2025) was estimated to increase emissions reduction seven-fold over current policies, while delivering $200 billion per year for clean-energy and social programs.

Climate justice

Policy designed through the lens of climate justice tries to address human rights issues and social inequality. According to proponents of climate justice, the costs of climate adaptation should be paid by those most responsible for climate change, while the beneficiaries of payments should be those suffering impacts. One way this can be addressed in practice is to have wealthy nations pay poorer countries to adapt.[372]

Oxfam found that in 2023 the wealthiest 10% of people were responsible for 50% of global emissions, while the bottom 50% were responsible for just 8%. Production of emissions is another way to look at responsibility: under that approach, the top 21 fossil fuel companies would owe cumulative climate reparations of $5.4 trillion over the period 2025–2050. To achieve a just transition, people working in the fossil fuel sector would also need other jobs, and their communities would need investments.

International climate agreements

Since 2000, rising CO2 emissions in China and the rest of world have surpassed the output of the United States and Europe.
Per person, the United States generates CO2 at a far faster rate than other primary regions.

Nearly all countries in the world are parties to the 1994 United Nations Framework Convention on Climate Change (UNFCCC). The goal of the UNFCCC is to prevent dangerous human interference with the climate system. As stated in the convention, this requires that greenhouse gas concentrations are stabilized in the atmosphere at a level where ecosystems can adapt naturally to climate change, food production is not threatened, and economic development can be sustained. The UNFCCC does not itself restrict emissions but rather provides a framework for protocols that do. Global emissions have risen since the UNFCCC was signed. Its yearly conferences are the stage of global negotiations.

The 1997 Kyoto Protocol extended the UNFCCC and included legally binding commitments for most developed countries to limit their emissions. During the negotiations, the G77 (representing developing countries) pushed for a mandate requiring developed countries to "[take] the lead" in reducing their emissions, since developed countries contributed most to the accumulation of greenhouse gases in the atmosphere. Per-capita emissions were also still relatively low in developing countries and developing countries would need to emit more to meet their development needs.

The 2009 Copenhagen Accord has been widely portrayed as disappointing because of its low goals, and was rejected by poorer nations including the G77. Associated parties aimed to limit the global temperature rise to below 2 °C. The accord set the goal of sending $100 billion per year to developing countries for mitigation and adaptation by 2020, and proposed the founding of the Green Climate Fund. As of 2020, only 83.3 billion were delivered. Only in 2023 the target is expected to be achieved.

In 2015 all UN countries negotiated the Paris Agreement, which aims to keep global warming well below 2.0 °C and contains an aspirational goal of keeping warming under 1.5 °C. The agreement replaced the Kyoto Protocol. Unlike Kyoto, no binding emission targets were set in the Paris Agreement. Instead, a set of procedures was made binding. Countries have to regularly set ever more ambitious goals and reevaluate these goals every five years. The Paris Agreement restated that developing countries must be financially supported. As of March 2025, 194 states and the European Union have acceded to or ratified the agreement.

The 1987 Montreal Protocol, an international agreement to phase out production of ozone-depleting gases, has had benefits for climate change mitigation. Several ozone-depleting gases like chlorofluorocarbons are powerful greenhouse gases, so banning their production and usage may have avoided a temperature rise of 0.5 °C–1.0 °C, as well as additional warming by preventing damage to vegetation from ultraviolet radiation. It is estimated that the agreement has been more effective at curbing greenhouse gas emissions than the Kyoto Protocol specifically designed to do so. The most recent amendment to the Montreal Protocol, the 2016 Kigali Amendment, committed to reducing the emissions of hydrofluorocarbons, which served as a replacement for banned ozone-depleting gases and are also potent greenhouse gases. Should countries comply with the amendment, a warming of 0.3 °C–0.5 °C is estimated to be avoided.

National responses

Annual CO2 emissions by region. This measures fossil fuel and industry emissions. Land use change is not included.

In 2019, the United Kingdom parliament became the first national government to declare a climate emergency. Other countries and jurisdictions followed suit. That same year, the European Parliament declared a "climate and environmental emergency". The European Commission presented its European Green Deal with the goal of making the EU carbon-neutral by 2050. In 2021, the European Commission released its "Fit for 55" legislation package, which contains guidelines for the car industry; all new cars on the European market must be zero-emission vehicles from 2035.

Major countries in Asia have made similar pledges: South Korea and Japan have committed to become carbon-neutral by 2050, and China by 2060. While India has strong incentives for renewables, it also plans a significant expansion of coal in the country. Vietnam is among very few coal-dependent, fast-developing countries that pledged to phase out unabated coal power by the 2040s or as soon as possible thereafter.

As of 2021, based on information from 48 national climate plans, which represent 40% of the parties to the Paris Agreement, estimated total greenhouse gas emissions will be 0.5% lower compared to 2010 levels, below the 45% or 25% reduction goals to limit global warming to 1.5 °C or 2 °C, respectively.

Society and culture

Denial and misinformation

Data has been cherry picked from short periods to falsely assert that global temperatures are not rising. Blue trendlines show short periods that mask longer-term warming trends (red trendlines). Blue rectangle with blue dots shows the so-called global warming hiatus.

Public debate about climate change has been strongly affected by climate change denial and misinformation, which first emerged in the United States and has since spread to other countries, particularly Canada and Australia. It originated from fossil fuel companies, industry groups, conservative think tanks, and contrarian scientists. Like the tobacco industry, the main strategy of these groups has been to manufacture doubt about climate-change related scientific data and results. People who hold unwarranted doubt about climate change are sometimes called climate change "skeptics", although "contrarians" or "deniers" are more appropriate terms.

There are different variants of climate denial: some deny that warming takes place at all, some acknowledge warming but attribute it to natural influences, and some minimize the negative impacts of climate change. Manufacturing uncertainty about the science later developed into a manufactured controversy: creating the belief that there is significant uncertainty about climate change within the scientific community to delay policy changes. Strategies to promote these ideas include criticism of scientific institutions, and questioning the motives of individual scientists. An echo chamber of climate-denying blogs and media has further fomented misunderstanding of climate change.

Public awareness and opinion

The public substantially underestimates the degree of scientific consensus that humans are causing climate change (2022 data). Studies from 2019 to 2021 found scientific consensus to range from 98.7 to 100%.

Climate change came to international public attention in the late 1980s. Due to media coverage in the early 1990s, people often confused climate change with other environmental issues like ozone depletion. In popular culture, the climate fiction movie The Day After Tomorrow (2004) and the Al Gore documentary An Inconvenient Truth (2006) focused on climate change.

Significant regional, gender, age and political differences exist in both public concern for, and understanding of, climate change. More highly educated people, and in some countries, women and younger people, were more likely to see climate change as a serious threat. College biology textbooks from the 2010s featured less content on climate change compared to those from the preceding decade, with decreasing emphasis on solutions. Partisan gaps also exist in many countries, and countries with high CO2 emissions tend to be less concerned. Views on causes of climate change vary widely between countries. Media coverage linked to protests has had impacts on public sentiment as well as on which aspects of climate change are focused upon. Higher levels of worry are associated with stronger public support for policies that address climate change. Concern has increased over time, and in 2021 a majority of citizens in 30 countries expressed a high level of worry about climate change, or view it as a global emergency. A 2024 survey across 125 countries found that 89% of the global population demanded intensified political action, but systematically underestimated other peoples' willingness to act.

Climate movement

Climate protests demand that political leaders take action to prevent climate change. They can take the form of public demonstrations, fossil fuel divestment, lawsuits and other activities. Prominent demonstrations include the School Strike for Climate. In this initiative, young people across the globe have been protesting since 2018 by skipping school on Fridays, inspired by Swedish activist and then-teenager Greta Thunberg. Mass civil disobedience actions by groups like Extinction Rebellion have protested by disrupting roads and public transport.

Litigation is increasingly used as a tool to strengthen climate action from public institutions and companies. Activists also initiate lawsuits which target governments and demand that they take ambitious action or enforce existing laws on climate change. Lawsuits against fossil-fuel companies generally seek compensation for loss and damage. On 23 July 2025, the UN's International Court of Justice issued its advisory opinion, saying explicitly that states must act to stop climate change, and if they fail to accomplish that duty, other states can sue them. This obligation includes implementing their commitments in international agreements they are parties to, such as the 2015 Paris Climate Accord.

History

Early discoveries

Eunice Newton Foote showed carbon dioxide's heat-capturing effect in 1856, foreseeing its implications for the planet. (Carbon dioxide was called "carbonic acid gas".)

Scientists in the 19th century such as Alexander von Humboldt began to foresee the effects of climate change. In the 1820s, Joseph Fourier proposed the greenhouse effect to explain why Earth's temperature was higher than the Sun's energy alone could explain. Earth's atmosphere is transparent to sunlight, so sunlight reaches the surface where it is converted to heat. However, the atmosphere is not transparent to heat radiating from the surface, and captures some of that heat, which in turn warms the planet. In 1856 Eunice Newton Foote demonstrated that the warming effect of the Sun is greater for air with water vapour than for dry air, and that the effect is even greater with carbon dioxide (CO2). In "Circumstances Affecting the Heat of the Sun's Rays" she concluded that "[a]n atmosphere of that gas would give to our earth a high temperature".

This 1912 article succinctly describes the greenhouse effect, how burning coal creates carbon dioxide to cause global warming and climate change.

Starting in 1859, John Tyndall established that nitrogen and oxygen—together totalling 99% of dry air—are transparent to radiated heat. However, water vapour and gases such as methane and carbon dioxide absorb radiated heat and re-radiate that heat into the atmosphere. Tyndall proposed that changes in the concentrations of these gases may have caused climatic changes in the past, including ice ages.

Svante Arrhenius noted that water vapour in air continuously varied, but the CO2 concentration in air was influenced by long-term geological processes. Warming from increased CO2 levels would increase the amount of water vapour, amplifying warming in a positive feedback loop. In 1896, he published the first climate model of its kind, projecting that halving CO2 levels could have produced a drop in temperature initiating an ice age. Arrhenius calculated the temperature increase expected from doubling CO2 to be around 5–6 °C. Other scientists were initially sceptical and believed that the greenhouse effect was saturated so that adding more CO2 would make no difference, and that the climate would be self-regulating. Beginning in 1938, Guy Stewart Callendar published evidence that climate was warming and CO2 levels were rising, but his calculations met the same objections.

Development of a scientific consensus

Scientific consensus on causation: Academic studies of scientific agreement on human-caused global warming among climate experts (2010–2015) reflect that the level of consensus correlates with expertise in climate science. A 2019 study found scientific consensus to be at 100%, and a 2021 study concluded that consensus exceeded 99%. Another 2021 study found that 98.7% of climate experts indicated that the Earth is getting warmer mostly because of human activity.

In the 1950s, Gilbert Plass created a detailed computer model that included different atmospheric layers and the infrared spectrum. This model predicted that increasing CO2 levels would cause warming. Around the same time, Hans Suess found evidence that CO2 levels had been rising, and Roger Revelle showed that the oceans would not absorb the increase. The two scientists subsequently helped Charles Keeling to begin a record of continued increase—the "Keeling Curve"—which was part of continued scientific investigation through the 1960s into possible human causation of global warming. Studies such as the National Research Council's 1979 Charney Report supported the accuracy of climate models that forecast significant warming. Human causation of observed global warming and dangers of unmitigated warming were publicly presented in James Hansen's 1988 testimony before a US Senate committee. The Intergovernmental Panel on Climate Change (IPCC), set up in 1988 to provide formal advice to the world's governments, spurred interdisciplinary research. As part of the IPCC reports, scientists assess the scientific discussion that takes place in peer-reviewed journal articles.

There is a nearly unanimous scientific consensus that the climate is warming and that this is caused by human activities. No scientific body of national or international standing disagrees with this view. As of 2019, agreement in recent literature reached over 99%. The 2021 IPCC Assessment Report stated that it is "unequivocal" that climate change is caused by humans. Consensus has further developed that action should be taken to protect people against the impacts of climate change. National science academies have called on world leaders to cut global emissions.

Recent developments

Extreme event attribution (EEA), also known as attribution science, was developed in the early decades of the 21st century. EEA uses climate models to identify and quantify the role that human-caused climate change plays in the frequency, intensity, duration, and impacts of specific individual extreme weather events. Results of attribution studies allow scientists and journalists to make statements such as, "this weather event was made at least n times more likely by human-caused climate change" or "this heatwave was made m degrees hotter than it would have been in a world without global warming" or "this event was effectively impossible without climate change". Greater computing power in the 2000s and conceptual breakthroughs in the early to mid 2010s enabled attribution science to detect the effects of climate change on some events with high confidence. Scientists use attribution methods and climate simulations that have already been peer reviewed, allowing "rapid attribution studies" to be published within a "news cycle" time frame after weather events.

Waste management

From Wikipedia, the free encyclopedia
A specialized trash collection truck providing regular municipal trash collection in a neighborhood in Stockholm, Sweden
Waste pickers burning e-waste in Agbogbloshie, a site near Accra in Ghana that processes large volumes of international electronic waste. The pickers burn the plastics off of materials and collect the metals for recycling, However, this process exposes pickers and their local communities to toxic fumes.
Containers for consumer waste collection at the Gdańsk University of Technology
A recycling and waste-to-energy plant for waste that is not exported

Waste management or waste disposal includes the processes and actions required to manage waste from its inception to its final disposal. This includes the collection, transport, treatment, and disposal of waste, together with monitoring and regulation of the waste management process and waste-related laws, technologies, and economic mechanisms.

Waste can either be solid, liquid, or gases and each type has different methods of disposal and management. Waste management deals with all types of waste, including industrial, chemical, municipal, organic, biomedical, and radioactive wastes. In some cases, waste can pose a threat to human health. Health issues are associated with the entire process of waste management. Health issues can also arise indirectly or directly: directly through the handling of solid waste, and indirectly through the consumption of water, soil, and food. Waste is produced by human activity, for example, the extraction and processing of raw materials. Waste management is intended to reduce the adverse effects of waste on human health, the environment, planetary resources, and aesthetics.

The aim of waste management is to reduce the dangerous effects of such waste on the environment and human health. A big part of waste management deals with municipal solid waste, which is created by industrial, commercial, and household activity.

Waste management practices are not the same across countries (developed and developing nations); regions (urban and rural areas), and residential and industrial sectors can all take different approaches.

Proper management of waste is important for building sustainable and liveable cities, but it remains a challenge for many developing countries and cities. A report found that effective waste management is relatively expensive, usually comprising 20%–50% of municipal budgets. Operating this essential municipal service requires integrated systems that are efficient, sustainable, and socially supported. A large portion of waste management practices deal with municipal solid waste (MSW) which is the bulk of the waste that is created by household, industrial, and commercial activity. According to the Intergovernmental Panel on Climate Change (IPCC), municipal solid waste is expected to reach approximately 3.4 Gt by 2050; however, policies and lawmaking can reduce the amount of waste produced in different areas and cities of the world. Measures of waste management include measures for integrated techno-economic mechanisms of a circular economy, effective disposal facilities, export and import control and optimal sustainable design of products that are produced.

In the first systematic review of the scientific evidence around global waste, its management, and its impact on human health and life, authors concluded that about a fourth of all the municipal solid terrestrial waste is not collected and an additional fourth is mismanaged after collection, often being burned in open and uncontrolled fires – or close to one billion tons per year when combined. They also found that broad priority areas each lack a "high-quality research base", partly due to the absence of "substantial research funding", which motivated scientists often require. Electronic waste (ewaste) includes discarded computer monitors, motherboards, mobile phones and chargers, compact discs (CDs), headphones, television sets, air conditioners and refrigerators. According to the Global E-waste Monitor 2017, India generates ~ 2 million tonnes (Mte) of e-waste annually and ranks fifth among the e-waste producing countries, after the United States, the People's Republic of China, Japan and Germany.

Effective 'Waste Management' involves the practice of '7R' - 'R'efuse, 'R'educe', 'R'euse, 'R'epair, 'R'epurpose, 'R'ecycle and 'R'ecover. Amongst these '7R's, the first two ('Refuse' and 'Reduce') relate to the non-creation of waste - by refusing to buy non-essential products and by reducing consumption. The next two ('Reuse' and 'Repair') refer to increasing the usage of the existing product, with or without the substitution of certain parts of the product. 'Repurpose' and 'Recycle' involve maximum usage of the materials used in the product, and 'Recover' is the least preferred and least efficient waste management practice involving the recovery of embedded energy in the waste material. For example, burning the waste to produce heat (and electricity from heat).

Principles of waste management

Diagram of the waste hierarchy

Waste hierarchy

The waste hierarchy refers to the "3 Rs" Reduce, Reuse and Recycle, which classifies waste management strategies according to their desirability in terms of waste minimisation. The waste hierarchy is the bedrock of most waste minimization strategies. The aim of the waste hierarchy is to extract the maximum practical benefits from products and to generate the minimum amount of end waste; see: resource recovery. The waste hierarchy is represented as a pyramid because the basic premise is that policies should promote measures to prevent the generation of waste. The next step or preferred action is to seek alternative uses for the waste that has been generated, i.e., by re-use. The next is recycling which includes composting. Following this step is material recovery and waste-to-energy. The final action is disposal, in landfills or through incineration without energy recovery. This last step is the final resort for waste that has not been prevented, diverted, or recovered. The waste hierarchy represents the progression of a product or material through the sequential stages of the pyramid of waste management. The hierarchy represents the latter parts of the life-cycle for each product.

Life-cycle of a product

The life-cycle of a product, often referred to as the product lifecycle, encompasses several key stages that begin with the design phase and proceed through manufacture, distribution, and primary use. After these initial stages, the product moves through the waste hierarchy's stages of reduce, reuse, and recycle. Each phase in this lifecycle presents unique opportunities for policy intervention, allowing stakeholders to rethink the necessity of the product, redesign it to minimize its waste potential, and extend its useful life.

During the design phase, considerations can be made to ensure that products are created with fewer resources, are more durable, and are easier to repair or recycle. This stage is critical for embedding sustainability into the product from the outset. Designers can select materials that have lower environmental impacts and create products that require less energy and resources to produce.


Manufacturing offers another crucial point for reducing waste and conserving resources. Innovations in production processes can lead to more efficient use of materials and energy, while also minimizing the generation of by-products and emissions. Adopting cleaner production techniques and improving manufacturing efficiency can significantly reduce the environmental footprint of a product.

Distribution involves the logistics of getting the product from the manufacturer to the consumer. Optimizing this stage can involve reducing packaging, choosing more sustainable transportation methods, and improving supply chain efficiencies to lower the overall environmental impact. Efficient logistics planning can also help in reducing fuel consumption and greenhouse gas emissions associated with the transport of goods.

The primary use phase of a product's lifecycle is where consumers interact with the product. Policies and practices that encourage responsible use, regular maintenance, and the proper functioning of products can extend their lifespan, thus reducing the need for frequent replacements and decreasing overall waste.

Once the product reaches the end of its primary use, it enters the waste hierarchy's stages. The first stage, reduction, involves efforts to decrease the volume and toxicity of waste generated. This can be achieved by encouraging consumers to buy less, use products more efficiently, and choose items with minimal packaging.

The reuse stage encourages finding alternative uses for products, whether through donation, resale, or repurposing. Reuse extends the life of products and delays their entry into the waste stream.

Recycling, the final preferred stage, involves processing materials to create new products, thus closing the loop in the material lifecycle. Effective recycling programs can significantly reduce the need for virgin materials and the environmental impacts associated with extracting and processing those materials.


Product life-cycle analysis (LCA) is a comprehensive method for evaluating the environmental impacts associated with all stages of a product's life. By systematically assessing these impacts, LCA helps identify opportunities to improve environmental performance and resource efficiency. Through optimizing product designs, manufacturing processes, and end-of-life management, LCA aims to maximize the use of the world's limited resources and minimize the unnecessary generation of waste.

In summary, the product lifecycle framework underscores the importance of a holistic approach to product design, use, and disposal. By considering each stage of the lifecycle and implementing policies and practices that promote sustainability, it is possible to significantly reduce the environmental impact of products and contribute to a more sustainable future.

Resource efficiency

Resource efficiency reflects the understanding that global economic growth and development can not be sustained at current production and consumption patterns. Globally, humanity extracts more resources to produce goods than the planet can replenish. Resource efficiency is the reduction of the environmental impact from the production and consumption of these goods, from final raw material extraction to the last use and disposal.

Polluter-pays principle

The polluter-pays principle mandates that the polluting parties pay for the impact on the environment. With respect to waste management, this generally refers to the requirement for a waste generator to pay for appropriate disposal of the unrecoverable materials.

History

Throughout most of history, the amount of waste generated by humans was insignificant due to low levels of population density and exploitation of natural resources. Common waste produced during pre-modern times was mainly ashes and human biodegradable waste, and these were released back into the ground locally, with minimum environmental impact. Tools made out of wood or metal were generally reused or passed down through the generations.

However, some civilizations have been more profligate in their waste output than others. In particular, the Maya of Central America had a fixed monthly ritual, in which the people of the village would gather together and burn their rubbish in large dumps.

In the Ashanti Empire by the 19th century, there existed a Public Works Department that was responsible for sanitation in Kumasi and its suburbs. They kept the streets clean daily and commanded civilians to keep their compounds clean and weeded.

United Kingdom

Edwin Chadwick's 1842 report The Sanitary Condition of the Labouring Population was influential in securing the passage of the first legislation aimed at waste clearance and disposal.

Following the onset of the Industrial Revolution, industrialisation, and the sustained urban growth of large population centres in England, the buildup of waste in the cities caused a rapid deterioration in levels of sanitation and the general quality of urban life. The streets became choked with filth due to the lack of waste clearance regulations. Calls for the establishment of municipal authority with waste removal powers occurred as early as 1751, when Corbyn Morris in London proposed that "... as the preservation of the health of the people is of great importance, it is proposed that the cleaning of this city, should be put under one uniform public management, and all the filth be...conveyed by the Thames to proper distance in the country".

However, it was not until the mid-19th century, spurred by increasingly devastating cholera outbreaks and the emergence of a public health debate that the first legislation on the issue emerged. Highly influential in this new focus was the report The Sanitary Condition of the Labouring Population in 1842 of the social reformer, Edwin Chadwick, in which he argued for the importance of adequate waste removal and management facilities to improve the health and wellbeing of the city's population.

In the UK, the Nuisance Removal and Disease Prevention Act of 1846 began what was to be a steadily evolving process of the provision of regulated waste management in London. The Metropolitan Board of Works was the first citywide authority that centralized sanitation regulation for the rapidly expanding city, and the Public Health Act 1875 made it compulsory for every household to deposit their weekly waste in "moveable receptacles" for disposal—the first concept for a dustbin.

Manlove, Alliott & Co. Ltd. 1894 destructor furnace. The use of incinerators for waste disposal became popular in the late 19th century.

The dramatic increase in waste for disposal led to the creation of the first incineration plants, or, as they were then called, "destructors". In 1874, the first incinerator was built in Nottingham by Manlove, Alliott & Co. Ltd. to the design of Alfred Fryer. However, these were met with opposition on account of the large amounts of ash they produced and which wafted over the neighbouring areas.

Similar municipal systems of waste disposal sprung up at the turn of the 20th century in other large cities of Europe and North America.

Early garbage removal trucks were simply open-bodied dump trucks pulled by a team of horses. They became motorized in the early part of the 20th century and the first closed-body trucks to eliminate odours with a dumping lever mechanism were introduced in the 1920s in Britain. These were soon equipped with 'hopper mechanisms' where the scooper was loaded at floor level and then hoisted mechanically to deposit the waste in the truck. The Garwood Load Packer was the first truck in 1938, to incorporate a hydraulic compactor.

United States

Waste management in the United States dates back to colonial times, with New Amsterdam (now New York City) making it illegal to throw waste into the street as early as 1654. In the mid 1700s, Benjamin Franklin started the first waste collection and street-cleaning service in the History of Philadelphia. He wrote and distributed papers explaining the benefits of clean streets, convincing residents to pay a small fee for regular cleaning. His efforts led to the paving and cleaning of Philadelphia's streets, making them more accessible and reducing dust and debris. His advocacy contributed to the passage of a 1762 law regulating street maintenance.

Historian Martin Melosi outlines the history of American urban sanitation through three distinct phases, each defined by evolving concerns about water supply, sewerage, and waste disposal:

  • The Age of Miasmas (Colonial Era–1880): As cities rapidly expanded, particularly after 1830, sanitation became a pressing issue. Influenced by English beliefs, American officials mistakenly blamed epidemic diseases on "miasmas"—unpleasant odors from accumulated filth. They focused on improving water supply and building mile after mile of sewers through residential neighborhoods to handle wastewater removal. No miasma supposedly meant no disease. Throughout the 1800s, cities typically relied on animals for organic waste disposal—even New York City used piggeries, with thousands of pigs roaming freely through the streets consuming city refuse.
  • The Bacteriological Revolution (1880–1945): Melosi finds that scientific breakthroughs in Europe revealed that germs, not miasmas, caused epidemics. This led to more effective disease prevention strategies and the development of comprehensive sanitation systems based on pure water supplies. Cities also began experimenting with solid waste disposal methods, particularly to manage the mountains of human and horse waste. However, they were late to deal with smoke pollution and they ignored industrial chemicals. In 1895, New York City became the first American city with public-sector garbage management. By the late 1880s the city government in Chicago hired 225 st teams, which gathered over 2,000 cubic yards of refuse daily. In Manhattan in New York City, individual scavengers carted away over 600 tons of garbage every day, and in the summer, over 1000 tons a day. The era of terrible epidemics such as cholera practically ended. (The worldwide "Spanish flu" epidemic of 1919 was a major killer that was not caused by urban waste.)
  • The New Ecology (Since 1945): Continued urban expansion, Melosi argues, has strained sanitation infrastructure, requiring costly cleanup and repairs. Since the 1960s, growing environmental awareness has broadened concerns beyond biological pollutants to include industrial and chemical contaminants. In 1962 Rachel Carson reached a huge popular audience with Silent Spring that warned that pesticides especially DDT were greatly damaging the environment--spring was eerily quiet because DDT was killing the songbirds. Public opinion forced wave after wave of government interventions from the national level, such as the Environmental Protection Agency.

Waste handling and transport

Moulded plastic, wheeled waste bin in Berkshire, England

Waste collection methods vary widely among different countries and regions. Domestic waste collection services are often provided by local government authorities, or by private companies for industrial and commercial waste. Some areas, especially those in less developed countries, do not have formal waste-collection systems.

Waste handling and transport

Curbside collection is the most common method of disposal in most European countries, Canada, New Zealand, the United States, and many other parts of the developed world in which waste is collected at regular intervals by specialised trucks. This is often associated with curb-side waste segregation. In rural areas, waste may need to be taken to a transfer station. Waste collected is then transported to an appropriate disposal facility. In some areas, vacuum collection is used in which waste is transported from the home or commercial premises by vacuum along small bore tubes. Systems are in use in Europe and North America.

In some jurisdictions, unsegregated waste is collected at the curb-side or from waste transfer stations and then sorted into recyclables and unusable waste. Such systems are capable of sorting large volumes of solid waste, salvaging recyclables, and turning the rest into bio-gas and soil conditioners. In San Francisco, the local government established its Mandatory Recycling and Composting Ordinance in support of its goal of "Zero waste by 2020", requiring everyone in the city to keep recyclables and compostables out of the landfill. The three streams are collected with the curbside "Fantastic 3" bin system – blue for recyclables, green for compostables, and black for landfill-bound materials – provided to residents and businesses and serviced by San Francisco's sole refuse hauler, Recology. The city's "Pay-As-You-Throw" system charges customers by the volume of landfill-bound materials, which provides a financial incentive to separate recyclables and compostables from other discards. The city's Department of the Environment's Zero Waste Program has led the city to achieve 80% diversion, the highest diversion rate in North America. Other businesses such as Waste Industries use a variety of colors to distinguish between trash and recycling cans. In addition, in some areas of the world the disposal of municipal solid waste can cause environmental strain due to official not having benchmarks that help measure the environmental sustainability of certain practices.

Waste segregation

Recycling point at the Gdańsk University of Technology

This is the separation of wet waste and dry waste. The purpose is to recycle dry waste easily and to use wet waste as compost. When segregating waste, the amount of waste that gets landfilled reduces considerably, resulting in lower levels of air and water pollution. Importantly, waste segregation should be based on the type of waste and the most appropriate treatment and disposal. This also makes it easier to apply different processes to the waste, like composting, recycling, and incineration. It is important to practice waste management and segregation as a community. One way to practice waste management is to ensure there is awareness. The process of waste segregation should be explained to the community.

Segregated waste is also often cheaper to dispose of because it does not require as much manual sorting as mixed waste. There are a number of important reasons why waste segregation is important such as legal obligations, cost savings, and protection of human health and the environment. Institutions should make it as easy as possible for their staff to correctly segregate their waste. This can include labelling, making sure there are enough accessible bins, and clearly indicating why segregation is so important. Labeling is especially important when dealing with nuclear waste due to how much harm to human health the excess products of the nuclear cycle can cause.

Hazards of waste management

There are multiple facets of waste management that all come with hazards, both for those around the disposal site and those who work within waste management. Exposure to waste of any kind can be detrimental to the health of the individual, primary conditions that worsen with exposure to waste are asthma and tuberculosis. The exposure to waste on an average individual is highly dependent on the conditions around them, those in less developed or lower income areas are more susceptible to the effects of waste product, especially through chemical waste. The range of hazards due to waste is extremely large and covers every type of waste, not only chemical. There are many different guidelines to follow for disposing different types of waste.

Diagram showing the multiple ways that incineration is hazardous to the population

The hazards of incineration are a large risk to many variable communities, including underdeveloped countries and countries or cities with little space for landfills or alternatives. Burning waste is an easily accessible option for many people around the globe, it has even been encouraged by the World Health Organization when there is no other option. Because burning waste is rarely paid attention to, its effects go unnoticed. The release of hazardous materials and CO2 when waste is burned is the largest hazard with incineration.

Financial models

In most developed countries, domestic waste disposal is funded from a national or local tax which may be related to income, or property values. Commercial and industrial waste disposal is typically charged for as a commercial service, often as an integrated charge which includes disposal costs. This practice may encourage disposal contractors to opt for the cheapest disposal option such as landfill rather than the environmentally best solution such as re-use and recycling.

Financing solid waste management projects can be overwhelming for the city government, especially if the government see it as an important service they should render to the citizen. Donors and grants are a funding mechanism that is dependent on the interest of the donor organization. As much as it is a good way to develop a city's waste management infrastructure, attracting and utilizing grants is solely reliant on what the donor considers important. Therefore, it may be a challenge for a city government to dictate how the funds should be distributed among the various aspect of waste management.

An example of a country that enforces a waste tax is Italy. The tax is based on two rates: fixed and variable. The fixed rate is based on the size of the house while the variable is determined by the number of people living in the house.

The World Bank finances and advises on solid waste management projects using a diverse suite of products and services, including traditional loans, results-based financing, development policy financing, and technical advisory. World Bank-financed waste management projects usually address the entire lifecycle of waste right from the point of generation to collection and transportation, and finally treatment and disposal.

Disposal methods

Landfill

A landfill is a site for the disposal of waste materials. It is the oldest and most common form of waste disposal, although the systematic burial of waste with daily, intermediate, and final covers only began in the 1940s. In the past, waste was simply left in piles or thrown into pits (known in archeology as middens).

Landfills take up a lot of land and pose environmental risks. Some landfill sites are used for waste management purposes, such as temporary storage, consolidation, and transfer, or for various stages of processing waste material, such as sorting, treatment, or recycling. Unless they are stabilized, landfills may undergo severe shaking or soil liquefaction during an earthquake. Once full, the area over a landfill site may be reclaimed for other uses.

Both active and restored landfill sites can have significant environmental impacts which can persist for many years. These include the release of gases that contribute to climate change and the discharge of liquid leachates containing high concentrations of polluting materials.
A landfill compaction vehicle in action.

Incineration

Tarastejärvi Incineration Plant in Tampere, Finland
Spittelau incineration plant in Vienna

Incineration is a disposal method in which solid organic wastes are subjected to combustion so as to convert them into residue and gaseous products. This method is useful for the disposal of both municipal solid waste and solid residue from wastewater treatment. This process reduces the volume of solid waste by 80 to 95 percent. Incineration and other high-temperature waste treatment systems are sometimes described as "thermal treatment". Incinerators convert waste materials into heat, gas, steam, and ash.

Incineration is carried out both on a small scale by individuals and on a large scale by industry. It is used to dispose of solid, liquid, and gaseous waste. It is recognized as a practical method of disposing of certain hazardous waste materials (such as biological medical waste). Incineration is a controversial method of waste disposal, due to issues such as the emission of gaseous pollutants including substantial quantities of carbon dioxide.

Incineration is common in countries such as Japan where land is more scarce, as the facilities generally do not require as much area as landfills. Waste-to-energy (WtE) or energy-from-waste (EfW) are broad terms for facilities that burn waste in a furnace or boiler to generate heat, steam, or electricity. Combustion in an incinerator is not always perfect and there have been concerns about pollutants in gaseous emissions from incinerator stacks. Particular concern has focused on some very persistent organic compounds such as dioxins, furans, and PAHs, which may be created and which may have serious environmental consequences and some heavy metals such as mercury and lead which can be volatilised in the combustion process.

Recycling

Steel crushed and baled for recycling

Recycling is a resource recovery practice that refers to the collection and reuse of waste materials such as empty beverage containers. This process involves breaking down and reusing materials that would otherwise be gotten rid of as trash. There are numerous benefits of recycling, and with so many new technologies making even more materials recyclable, it is possible to clean up the Earth. Recycling not only benefits the environment but also positively affects the economy. The materials from which the items are made can be made into new products. Materials for recycling may be collected separately from general waste using dedicated bins and collection vehicles, a procedure called kerbside collection. In some communities, the owner of the waste is required to separate the materials into different bins (e.g. for paper, plastics, metals) prior to its collection. In other communities, all recyclable materials are placed in a single bin for collection, and the sorting is handled later at a central facility. The latter method is known as "single-stream recycling".

A recycling point in Lappajärvi, Finland

The most common consumer products recycled include aluminium such as beverage cans, copper such as wire, steel from food and aerosol cans, old steel furnishings or equipment, rubber tyres, polyethylene and PET bottles, glass bottles and jars, paperboard cartons, newspapers, magazines and light paper, and corrugated fiberboard boxes.

PVC, LDPE, PP, and PS (see resin identification code) are also recyclable. These items are usually composed of a single type of material, making them relatively easy to recycle into new products. The recycling of complex products (such as computers and electronic equipment) is more difficult, due to the additional dismantling and separation required.

The type of material accepted for recycling varies by city and country. Each city and country has different recycling programs in place that can handle the various types of recyclable materials. However, certain variation in acceptance is reflected in the resale value of the material once it is reprocessed. Some of the types of recycling include waste paper and cardboard, plastic recycling, metal recycling, electronic devices, wood recycling, glass recycling, cloth and textile and so many more. In July 2017, the Chinese government announced an import ban of 24 categories of recyclables and solid waste, including plastic, textiles and mixed paper, placing tremendous impact on developed countries globally, which exported directly or indirectly to China.

Re-use

Biological reprocessing

An active compost heap

Recoverable materials that are organic in nature, such as plant material, food scraps, and paper products, can be recovered through composting and digestion processes to decompose the organic matter. The resulting organic material is then recycled as mulch or compost for agricultural or landscaping purposes. In addition, waste gas from the process (such as methane) can be captured and used for generating electricity and heat (CHP/cogeneration) maximising efficiencies. There are different types of composting and digestion methods and technologies. They vary in complexity from simple home compost heaps to large-scale industrial digestion of mixed domestic waste. The different methods of biological decomposition are classified as aerobic or anaerobic methods. Some methods use the hybrids of these two methods. The anaerobic digestion of the organic fraction of solid waste is more environmentally effective than landfill, or incineration. The intention of biological processing in waste management is to control and accelerate the natural process of decomposition of organic matter. (See resource recovery).

Energy recovery

Energy recovery from waste is the conversion of non-recyclable waste materials into usable heat, electricity, or fuel through a variety of processes, including combustion, gasification, pyrolyzation, anaerobic digestion, and landfill gas recovery. This process is often called waste-to-energy. Energy recovery from waste is part of the non-hazardous waste management hierarchy. Using energy recovery to convert non-recyclable waste materials into electricity and heat, generates a renewable energy source and can reduce carbon emissions by offsetting the need for energy from fossil sources as well as reduce methane generation from landfills. Globally, waste-to-energy accounts for 16% of waste management.

The energy content of waste products can be harnessed directly by using them as a direct combustion fuel, or indirectly by processing them into another type of fuel. Thermal treatment ranges from using waste as a fuel source for cooking or heating and the use of the gas fuel (see above) to using it as a fuel for boilers. Pyrolysis and gasification are two related forms of thermal treatment where waste materials are heated to high temperatures with limited oxygen availability. The process usually occurs in a sealed vessel under high pressure. Pyrolysis of solid waste converts the material into solid, liquid, and gas products. The liquid and gas can be burnt to produce energy or refined into other chemical products (chemical refinery). The solid residue (char) can be further refined into products such as activated carbon. Gasification and advanced Plasma arc gasification are used to convert organic materials directly into a synthetic gas (syngas) composed of carbon monoxide and hydrogen. The gas is then burnt to produce electricity and steam. An alternative to pyrolysis is supercritical water decomposition at a high-temperature and pressure (hydrothermal monophasic oxidation).

Pyrolysis

Pyrolysis is often used to convert many types of domestic and industrial residues into a recovered fuel. Different types of waste input (such as plant waste, food waste, tyres) placed in the pyrolysis process potentially yield an alternative to fossil fuels. Pyrolysis is a process of thermo-chemical decomposition of organic materials by heat in the absence of stoichiometric quantities of oxygen; the decomposition produces various hydrocarbon gases. During pyrolysis, the molecules of an object vibrate at high frequencies to the extent that molecules start breaking down. The rate of pyrolysis increases with temperature. In industrial applications, temperatures are above 430 °C (800 °F).

Slow pyrolysis produces gases and solid charcoal. Pyrolysis holds promise for conversion of waste biomass into useful liquid fuel. Pyrolysis of waste wood and plastics can potentially produce fuel. The solids left from pyrolysis contain metals, glass, sand, and pyrolysis coke which does not convert to gas. Compared to the process of incineration, certain types of pyrolysis processes release less harmful by-products that contain alkali metals, sulphur, and chlorine. However, pyrolysis of some waste yields gases which impact the environment such as HCl and SO2.

Resource recovery

Resource recovery is the systematic diversion of waste, which was intended for disposal, for a specific next use. It is the processing of recyclables to extract or recover materials and resources, or convert to energy. These activities are performed at a resource recovery facility. Resource recovery is not only environmentally important, but it is also cost-effective. It decreases the amount of waste for disposal, saves space in landfills, and conserves natural resources.

Resource recovery, an alternative approach to traditional waste management, utilizes life cycle analysis (LCA) to evaluate and optimize waste handling strategies. Comprehensive studies focusing on mixed municipal solid waste (MSW) have identified a preferred pathway for maximizing resource efficiency and minimizing environmental impact, including effective waste administration and management, source separation of waste materials, efficient collection systems, reuse and recycling of non-organic fractions, and processing of organic material through anaerobic digestion.

As an example of how resource recycling can be beneficial, many items thrown away contain metals that can be recycled to create a profit, such as the components in circuit boards. Wood chippings in pallets and other packaging materials can be recycled into useful products for horticulture. The recycled chips can cover paths, walkways, or arena surfaces.

Application of rational and consistent waste management practices can yield a range of benefits including:

  1. Economic – Improving economic efficiency through the means of resource use, treatment, and disposal and creating markets for recycles can lead to efficient practices in the production and consumption of products and materials resulting in valuable materials being recovered for reuse and the potential for new jobs and new business opportunities.
  2. Social – By reducing adverse impacts on health through proper waste management practices, the resulting consequences are more appealing to civic communities. Better social advantages can lead to new sources of employment and potentially lift communities out of poverty, especially in some of the developing poorer countries and cities.
  3. Environmental – Reducing or eliminating adverse impacts on the environment through reducing, reusing, recycling, and minimizing resource extraction can result in improved air and water quality and help in the reduction of greenhouse gas emissions.
  4. Inter-generational Equity – Following effective waste management practices can provide subsequent generations a more robust economy, a fairer and more inclusive society and a cleaner environment.

Waste valorization

Waste valorization, beneficial reuse, value recovery or waste reclamation is the process of waste products or residues from an economic process being valorized (given economic value), by reuse or recycling in order to create economically useful materials. The term comes from practices in sustainable manufacturing and economics, industrial ecology and waste management. The term is usually applied in industrial processes where residue from creating or processing one good is used as a raw material or energy feedstock for another industrial process. Industrial wastes in particular are good candidates for valorization because they tend to be more consistent and predictable than other waste, such as household waste.

Increased regulation of residual materials and socioeconomic changes, such as the introduction of ideas about sustainable development and circular economy in the 1990s and 2000s increased focus on industrial practices to recover resources as value add materials.

Liquid waste-management

Liquid waste is an important category of waste management because it is so difficult to deal with. Unlike solid wastes, liquid wastes cannot be easily picked up and removed from an environment. Liquid wastes spread out, and easily pollute other sources of liquid if brought into contact. This type of waste also soaks into objects like soil and groundwater. This in turn carries over to pollute the plants, the animals in the ecosystem, as well as the humans within the area of the pollution.

Industrial wastewater

Wastewater from an industrial process can be converted at a treatment plant to solids and treated water for reuse.

Industrial wastewater treatment describes the processes used for treating wastewater that is produced by industries as an undesirable by-product. After treatment, the treated industrial wastewater (or effluent) may be reused or released to a sanitary sewer or to a surface water in the environment. Some industrial facilities generate wastewater that can be treated in sewage treatment plants. Most industrial processes, such as petroleum refineries, chemical and petrochemical plants have their own specialized facilities to treat their wastewaters so that the pollutant concentrations in the treated wastewater comply with the regulations regarding disposal of wastewaters into sewers or into rivers, lakes or oceans. This applies to industries that generate wastewater with high concentrations of organic matter (e.g. oil and grease), toxic pollutants (e.g. heavy metals, volatile organic compounds) or nutrients such as ammonia. Some industries install a pre-treatment system to remove some pollutants (e.g., toxic compounds), and then discharge the partially treated wastewater to the municipal sewer system.

Most industries produce some wastewater. Recent trends have been to minimize such production or to recycle treated wastewater within the production process. Some industries have been successful at redesigning their manufacturing processes to reduce or eliminate pollutants. Sources of industrial wastewater include battery manufacturing, chemical manufacturing, electric power plants, food industry, iron and steel industry, metal working, mines and quarries, nuclear industry, oil and gas extraction, petroleum refining and petrochemicals, pharmaceutical manufacturing, pulp and paper industry, smelters, textile mills, industrial oil contamination, water treatment and wood preserving. Treatment processes include brine treatment, solids removal (e.g. chemical precipitation, filtration), oils and grease removal, removal of biodegradable organics, removal of other organics, removal of acids and alkalis, and removal of toxic materials.

Sewage sludge treatment

Sludge treatment in anaerobic digesters at a sewage treatment plant in Cottbus, Germany

Sewage sludge treatment describes the processes used to manage and dispose of sewage sludge produced during sewage treatment. Sludge treatment is focused on reducing sludge weight and volume to reduce transportation and disposal costs, and on reducing potential health risks of disposal options. Water removal is the primary means of weight and volume reduction, while pathogen destruction is frequently accomplished through heating during thermophilic digestion, composting, or incineration. The choice of a sludge treatment method depends on the volume of sludge generated, and comparison of treatment costs required for available disposal options. Air-drying and composting may be attractive to rural communities, while limited land availability may make aerobic digestion and mechanical dewatering preferable for cities, and economies of scale may encourage energy recovery alternatives in metropolitan areas.

Sludge is mostly water with some amounts of solid material removed from liquid sewage. Primary sludge includes settleable solids removed during primary treatment in primary clarifiers. Secondary sludge is sludge separated in secondary clarifiers that are used in secondary treatment bioreactors or processes using inorganic oxidizing agents. In intensive sewage treatment processes, the sludge produced needs to be removed from the liquid line on a continuous basis because the volumes of the tanks in the liquid line have insufficient volume to store sludge. This is done in order to keep the treatment processes compact and in balance (production of sludge approximately equal to the removal of sludge). The sludge removed from the liquid line goes to the sludge treatment line. Aerobic processes (such as the activated sludge process) tend to produce more sludge compared with anaerobic processes. On the other hand, in extensive (natural) treatment processes, such as ponds and constructed wetlands, the produced sludge remains accumulated in the treatment units (liquid line) and is only removed after several years of operation.

Sludge treatment options depend on the amount of solids generated and other site-specific conditions. Composting is most often applied to small-scale plants with aerobic digestion for mid-sized operations, and anaerobic digestion for the larger-scale operations. The sludge is sometimes passed through a so-called pre-thickener which de-waters the sludge. Types of pre-thickeners include centrifugal sludge thickeners, rotary drum sludge thickeners and belt filter presses. Dewatered sludge may be incinerated or transported offsite for disposal in a landfill or use as an agricultural soil amendment.

Energy may be recovered from sludge through methane gas production during anaerobic digestion or through incineration of dried sludge, but energy yield is often insufficient to evaporate sludge water content or to power blowers, pumps, or centrifuges required for dewatering. Coarse primary solids and secondary sewage sludge may include toxic chemicals removed from liquid sewage by sorption onto solid particles in clarifier sludge. Reducing sludge volume may increase the concentration of some of these toxic chemicals in the sludge.

Avoidance and reduction methods

An important method of waste management is the prevention of waste material being created, also known as waste reduction. Waste minimization is reducing the quantity of hazardous wastes achieved through a thorough application of innovative or alternative procedures. Methods of avoidance include reuse of second-hand products, repairing broken items instead of buying new ones, designing products to be refillable or reusable (such as cotton instead of plastic shopping bags), encouraging consumers to avoid using disposable products (such as disposable cutlery), removing any food/liquid remains from cans and packaging, and designing products that use less material to achieve the same purpose (for example, lightweighting of beverage cans).

International waste trade

The global waste trade is the international trade of waste between countries for further treatment, disposal, or recycling. Toxic or hazardous wastes are often imported by developing countries from developed countries.

The World Bank Report What a Waste: A Global Review of Solid Waste Management, describes the amount of solid waste produced in a given country. Specifically, countries which produce more solid waste are more economically developed and more industrialized. The report explains that "Generally, the higher the economic development and rate of urbanization, the greater the amount of solid waste produced." Therefore, countries in the Global North, which are more economically developed and urbanized, produce more solid waste than Global South countries.

Current international trade flows of waste follow a pattern of waste being produced in the Global North and being exported to and disposed of in the Global South. Multiple factors affect which countries produce waste and at what magnitude, including geographic location, degree of industrialization, and level of integration into the global economy.

Numerous scholars and researchers have linked the sharp increase in waste trading and the negative impacts of waste trading to the prevalence of neoliberal economic policy. With the major economic transition towards neoliberal economic policy in the 1980s, the shift towards "free-market" policy has facilitated the sharp increase in the global waste trade.

Specifically, developing countries have been targeted by trade liberalization policies to import waste as a means of economic expansion. The guiding neoliberal economic policy argues that the way to be integrated into the global economy is to participate in trade liberalization and exchange in international trade markets. Their claim is that smaller countries, with less infrastructure, less wealth, and less manufacturing ability, should take in hazardous wastes as a way to increase profits and stimulate their economies.

Challenges in developing countries

Areas with developing economies often experience exhausted waste collection services and inadequately managed and uncontrolled dumpsites. The problems are worsening. Problems with governance complicate the situation. Waste management in these countries and cities is an ongoing challenge due to weak institutions, chronic under-resourcing, and rapid urbanization. All of these challenges, along with the lack of understanding of different factors that contribute to the hierarchy of waste management, affect the treatment of waste.

In developing countries, waste management activities are usually carried out by the poor, for their survival. It has been estimated that 2% of the population in Asia, Latin America, and Africa are dependent on waste for their livelihood. Family organized, or individual manual scavengers are often involved with waste management practices with very little supportive network and facilities with increased risk of health effects. Additionally, this practice prevents their children from further education. The participation level of most citizens in waste management is very low, residents in urban areas are not actively involved in the process of waste management.

Technologies

Traditionally, the waste management industry has been a late adopter of new technologies such as RFID (Radio Frequency Identification) tags, GPS and integrated software packages which enable better quality data to be collected without the use of estimation or manual data entry. This technology has been used widely by many organizations in some industrialized countries. Radiofrequency identification is a tagging system for automatic identification of recyclable components of municipal solid waste streams.

Smart waste management has been implemented in several cities, including San Francisco, Varde or Madrid. Waste containers are equipped with level sensors. When the container is almost full, the sensor warns the pickup truck, which can thus trace its route servicing the fullest containers and skipping the emptiest ones.

The "Global Waste Management Outlook 2024," supported by the Environment Fund - UNEP's core financial fund, and jointly published with the International Solid Waste Association (ISWA), provides a comprehensive update on the trajectory of global waste generation and the escalating costs of waste management since 2018. The report predicts municipal solid waste to rise from 2.3 billion tonnes in 2023 to 3.8 billion tonnes by 2050. The direct global cost of waste management was around USD 252 billion in 2020, which could soar to USD 640.3 billion annually by 2050 if current practices continue without reform. Incorporating life cycle assessments, the report contrasts scenarios from maintaining the status quo to fully adopting zero waste and circular economy principles. It indicates that effective waste prevention and management could cap annual costs at USD 270.2 billion by 2050, while a circular economy approach could transform the sector into a net positive, offering a potential annual gain of USD 108.5 billion. To prevent the direct outcomes, the report calls for immediate action across multiple sectors, including development banks, governments, municipalities, producers, retailers, and citizens, providing targeted strategies for waste reduction and improved management practices.

Waste management by region

China

Municipal solid waste generation shows spatiotemporal variation. In spatial distribution, the point sources in eastern coastal regions are quite different. Guangdong, Shanghai and Tianjin produced municipal solid waste (MSW) of 30.35, 7.85 and 2.95 Mt, respectively. In temporal distribution, during 2009–2018, Fujian province showed a 123% increase in MSW generation while Liaoning province showed only 7% increase, whereas Shanghai special zone had a decline of −11% after 2013. MSW composition characteristics are complicated. The major components such as kitchen waste, paper and rubber & plastics in different eastern coastal cities have fluctuation in the range of 52.8–65.3%, 3.5–11.9%, and 9.9–19.1%, respectively. In 2021, China's recycling rate was about 20 %.

Hungary

Hungary's first waste prevention program was their 2014-2020 national waste management plan. Their current program (2021-2027) is financed by European Union and international grants, domestic co-financing, product charges, and landfill taxes.

Morocco

Morocco has seen benefits from implementing a $300 million sanitary landfill system. While it might appear to be a costly investment, the country's government predicts that it has saved them another $440 million in damages, or consequences of failing to dispose of waste properly.

San Francisco

San Francisco started to make changes to their waste management policies in 2009 with the expectation to be zero waste by 2030. Council made changes such as making recycling and composting a mandatory practice for businesses and individuals, banning Styrofoam and plastic bags, putting charges on paper bags, and increasing garbage collection rates. Businesses are fiscally rewarded for correct disposal of recycling and composting and taxed for incorrect disposal. Besides these policies, the waste bins were manufactured in various sizes. The compost bin is the largest, the recycling bin is second, and the garbage bin is the smallest. This encourages individuals to sort their waste thoughtfully with respect to the sizes. These systems are working because they were able to divert 80% of waste from the landfill, which is the highest rate of any major U.S. city. Despite all these changes, Debbie Raphael, director of the San Francisco Department of the Environment, states that zero waste is still not achievable until all products are designed differently to be able to be recycled or compostable.

Turkey

Turkey generates about 30 million tons of solid municipal waste per year; the annual amount of waste generated per capita amounts to about 400 kilograms. According to Waste Atlas, Turkey's waste collection coverage rate is 77%, whereas its unsound waste disposal rate is 69%. While the country has a strong legal framework in terms of laying down common provisions for waste management, the implementation process has been considered slow since the beginning of 1990s.

United Kingdom

Waste management policy in England is the responsibility of the Department of the Environment, Food and Rural Affairs (DEFRA). In England, the "Waste Management Plan for England" presents a compilation of waste management policies. In the devolved regions such as Scotland, waste management policy is a responsibility of their own respective departments.

Zambia

In Zambia, ASAZA is a community-based organization whose principal purpose is to complement the efforts of the Government and cooperating partners to uplift the standard of living for disadvantaged communities. The project's main objective is to minimize the problem of indiscriminate littering which leads to land degradation and pollution of the environment. ASAZA is also at the same time helping alleviate the problems of unemployment and poverty through income generation and payment of participants, women, and unskilled youths.

Scientific journals

Related scientific journals in this area include:

Logical reasoning

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Logical_reasoning   Logical reasoni...