From Wikipedia, the free encyclopedia
Maglev (derived from magnetic levitation) is a transport method that uses magnetic levitation to move vehicles without touching the ground. With maglev, a vehicle travels along a guideway using magnets to create both lift and propulsion, thereby reducing friction and allowing higher speeds.
The Shanghai Maglev Train, also known as the Transrapid, is the fastest commercial train currently in operation and has a top speed of 430km/h. The line was designed to connect Shanghai Pudong International Airport and the outskirts of central Pudong, Shanghai. It covers a distance of 30.5 kilometres in 8 minutes.[1]
Maglev trains move more smoothly and more quietly than wheeled mass transit systems. They are relatively unaffected by weather. The power needed for levitation is typically not a large percentage of its overall energy consumption;[2] most goes to overcome air resistance (drag), as with other high-speed transport. Maglev trains hold the speed record for rail transportation. Vacuum tube train systems might allow maglev trains to attain still higher speeds. No such tracks have been built commercially.[3]
Compared to conventional trains, differences in construction affect the economics of maglev trains. For high-speed wheeled trains, wear and tear from friction along with the "hammer effect" from wheels on rails accelerates equipment wear and prevents higher speeds.[4] Conversely, maglev systems have been much more expensive to construct, offsetting lower maintenance costs.
Despite decades of research and development, only two commercial maglev transport systems are in operation, with two others under construction.[note 1] In April 2004, Shanghai's Transrapid system began commercial operations. In March 2005, Japan began operation of its relatively low-speed HSST "Linimo" line in time for the 2005 World Expo. In its first three months, the Linimo line carried over 10 million passengers. South Korea and the People's Republic of China are both building low-speed maglev lines of their own designs, one in Beijing and the other at Seoul's Incheon Airport. Many maglev projects are controversial, and the technological potential, adoption prospects and economics of maglev systems are hotly debated.[citation needed] The Shanghai system was labeled a white elephant by opponents.[5]
History
First patent
High-speed transportation patents were granted to various inventors throughout the world.[6] Early United States patents for a linear motor propelled train were awarded to German inventor Alfred Zehden. The inventor was awarded U.S. Patent 782,312 (14 February 1905) and U.S. Patent RE12,700 (21 August 1907).[note 2] In 1907, another early electromagnetic transportation system was developed by F. S. Smith.[7] A series of German patents for magnetic levitation trains propelled by linear motors were awarded to Hermann Kemper between 1937 and 1941.[note 3] An early maglev train was described in U.S. Patent 3,158,765, "Magnetic system of transportation", by G. R. Polgreen (25 August 1959). The first use of "maglev" in a United States patent was in "Magnetic levitation guidance system"[8] by Canadian Patents and Development Limited.Development
In the late 1940s, the British electrical engineer Eric Laithwaite, a professor at Imperial College London, developed the first full-size working model of the linear induction motor. He became professor of heavy electrical engineering at Imperial College in 1964, where he continued his successful development of the linear motor.[9] Since linear motors do not require physical contact between the vehicle and guideway, they became a common fixture on advanced transportation systems in the 1960s and 70s. Laithwaite joined one such project, the tracked hovercraft, although the project was cancelled in 1973.[10]The linear motor was naturally suited to use with maglev systems as well. In the early 1970s, Laithwaite discovered a new arrangement of magnets, the magnetic river, that allowed a single linear motor to produce both lift and forward thrust, allowing a maglev system to be built with a single set of magnets. Working at the British Rail Research Division in Derby, along with teams at several civil engineering firms, the "transverse-flux" system was developed into a working system.
The first commercial maglev people mover was simply called "MAGLEV" and officially opened in 1984 near Birmingham, England. It operated on an elevated 600-metre (2,000 ft) section of monorail track between Birmingham International Airport and Birmingham International railway station, running at speeds up to 42 km/h (26 mph). The system was closed in 1995 due to reliability problems.[11]
New York, United States, 1913
Emile Bachelet, of Mount Vernon, N. Y., demonstrated a prototype of a magnetic levitating railway car.[12]New York, United States, 1968
In 1968, while delayed in traffic on the Throgs Neck Bridge, James Powell, a researcher at Brookhaven National Laboratory (BNL), thought of using magnetically levitated transportation.[13] Powell and BNL colleague Gordon Danby worked out a MagLev concept using static magnets mounted on a moving vehicle to induce electrodynamic lifting and stabilizing forces in specially shaped loops on a guideway.[14][15]Hamburg, Germany, 1979
Transrapid 05 was the first maglev train with longstator propulsion licenced for passenger transportation. In 1979, a 908 m track was opened in Hamburg for the first International Transportation Exhibition (IVA 79). Interest was sufficient that operations were extended three months after the exhibition finished, having carried more than 50,000 passengers. It was reassembled in Kassel in 1980.Birmingham, United Kingdom, 1984–95
The world's first commercial automated maglev system was a low-speed maglev shuttle that ran from the airport terminal of Birmingham International Airport to the nearby Birmingham International railway station between 1984 and 1995.[16] Track length was 600 metres (2,000 ft), and trains "flew" at an altitude of 15 millimetres (0.59 in), levitated by electromagnets, and propelled with linear induction motors.[17] It operated for nearly eleven years, but obsolescence problems with the electronic systems made it unreliable as years passed. One of the original cars is now on display at Railworld in Peterborough, together with the RTV31 hover train vehicle. Another is on display at the National Railway Museum in York.
Several favourable conditions existed when the link was built:
- The British Rail Research vehicle was 3 tonnes and extension to the 8 tonne vehicle was easy.
- Electrical power was available.
- The airport and rail buildings were suitable for terminal platforms.
- Only one crossing over a public road was required and no steep gradients were involved.
- Land was owned by the railway or airport.
- Local industries and councils were supportive.
- Some government finance was provided and because of sharing work, the cost per organization was low.
Emsland, Germany, 1984–2012
Japan, 1985–
JNR ML500 at a test track in Miyazaki, Japan, on 21 December 1979 travelled at 517 km/h (321 mph), authorized by Guinness World Records.
Japan operates two independently developed maglev trains. One is HSST by Japan Airlines and the other, which is more well-known, is SCMaglev by the Central Japan Railway Company.
The development of the latter started in 1969. Miyazaki test track regularly hit 517 km/h (321 mph) by 1979. After an accident that destroyed the train, a new design was selected. In Okazaki, Japan (1987), the SCMaglev took a test ride at the Okazaki exhibition. Tests through the 1980s continued in Miyazaki before transferring to a far larger test track, 20 km (12 mi) long, in Yamanashi in 1997.
Development of HSST started in 1974, based on technologies introduced from Germany. In Tsukuba, Japan (1985), the HSST-03 (Linimo) became popular in spite of its 300 km/h (190 mph) at the Tsukuba World Exposition. In Saitama, Japan (1988), the HSST-04-1 was revealed at the Saitama exhibition performed in Kumagaya. Its fastest recorded speed was 300 km/h (190 mph).[22]
Vancouver, Canada, and Hamburg, Germany, 1986–88
In Vancouver, Canada, the SCMaglev was exhibited at Expo 86. Guests could ride the train along a short section of track at the fairgrounds. In Hamburg, Germany, the TR-07 was exhibited at the international traffic exhibition (IVA88) in 1988.Berlin, Germany, 1989–91
In West Berlin, the M-Bahn was built in the late 1980s. It was a driverless maglev system with a 1.6 km (0.99 mi) track connecting three stations. Testing with passenger traffic started in August 1989, and regular operation started in July 1991. Although the line largely followed a new elevated alignment, it terminated at Gleisdreieck U-Bahn station, where it took over an unused platform for a line that formerly ran to East Berlin. After the fall of the Berlin Wall, plans were set in motion to reconnect this line (today's U2). Deconstruction of the M-Bahn line began only two months after regular service began. It was called the Pundai project and was completed in February 1992.Technology
In the public imagination, "maglev" often evokes the concept of an elevated monorail track with a linear motor. Maglev systems may be monorail or dual rail[23] and not all monorail trains are maglevs. Some railway transport systems incorporate linear motors but use electromagnetism only for propulsion, without levitating the vehicle. Such trains have wheels and are not maglevs.[note 4] Maglev tracks, monorail or not, can also be constructed at grade (i.e. not elevated). Conversely, non-maglev tracks, monorail or not, can be elevated too. Some maglev trains do incorporate wheels and function like linear motor-propelled wheeled vehicles at slower speeds but "take off" and levitate at higher speeds.[note 5]Overview
- Electromagnetic suspension (EMS), electronically controlled electromagnets in the train attract it to a magnetically conductive (usually steel) track.
- Electrodynamic suspension (EDS) uses superconducting electromagnets or strong permanent magnets that create a magnetic field which induces currents in nearby metallic conductors when there is relative movement which pushes and pulls the train towards the designed levitation position on the guide way.
Electromagnetic suspension
Electromagnetic suspension (EMS) is used to levitate the Transrapid on the track, so that the train can be faster than wheeled mass transit systems[24][25]
In electromagnetic suspension (EMS) systems, the train levitates above a steel rail while electromagnets, attached to the train, are oriented toward the rail from below. The system is typically arranged on a series of C-shaped arms, with the upper portion of the arm attached to the vehicle, and the lower inside edge containing the magnets. The rail is situated inside the C, between the upper and lower edges.
Magnetic attraction varies inversely with the cube of distance, so minor changes in distance between the magnets and the rail produce greatly varying forces. These changes in force are dynamically unstable – a slight divergence from the optimum position tends to grow rather, requiring sophisticated feedback systems to maintain a constant distance from the track, (approximately 15 millimetres (0.59 in)).[26][27]
The major advantage to suspended maglev systems is that they work at all speeds, unlike electrodynamic systems which only work at a minimum speed of about 30 km/h (19 mph). This eliminates the need for a separate low-speed suspension system, and can simplify track layout. On the downside, the dynamic instability demands fine track tolerances, which can offset this advantage. Eric Laithwaite was concerned that in order to meet the required tolerances, the gap between magnets and rail would have to be increased to the point where the magnets would be unreasonably large.[28] In practice, this problem was addressed through improved feedback systems, which support the required tolerances.
Electrodynamic suspension
In electrodynamic suspension (EDS), both the guideway and the train exert a magnetic field, and the train is levitated by the repulsive and attractive force between these magnetic fields.[29] In some configurations, the train can be levitated only by repulsive force. In the early stages of maglev development at the Miyazaki test track, a purely repulsive system was used instead of the later repulsive and attractive EDS system.[30] The magnetic field is produced either by superconducting magnets (as in JR–Maglev) or by an array of permanent magnets (as in Inductrack). The repulsive and attractive force in the track is created by an induced magnetic field in wires or other conducting strips in the track. A major advantage of EDS maglev systems is that they are dynamically stable – changes in distance between the track and the magnets creates strong forces to return the system to its original position.[28] In addition, the attractive force varies in the opposite manner, providing the same adjustment effects. No active feedback control is needed.
However, at slow speeds, the current induced in these coils and the resultant magnetic flux is not large enough to levitate the train. For this reason, the train must have wheels or some other form of landing gear to support the train until it reaches take-off speed. Since a train may stop at any location, due to equipment problems for instance, the entire track must be able to support both low- and high-speed operation.
Another downside is that the EDS system naturally creates a field in the track in front and to the rear of the lift magnets, which acts against the magnets and creates magnetic drag. This is generally only a concern at low speeds (This is one of the reasons why JR abandoned a purely repulsive system and adopted the sidewall levitation system.)[30] At higher speeds other modes of drag dominate.[28]
The drag force can be used to the electrodynamic system's advantage, however, as it creates a varying force in the rails that can be used as a reactionary system to drive the train, without the need for a separate reaction plate, as in most linear motor systems. Laithwaite led development of such "traverse-flux" systems at his Imperial College laboratory.[28] Alternatively, propulsion coils on the guideway are used to exert a force on the magnets in the train and make the train move forward. The propulsion coils that exert a force on the train are effectively a linear motor: an alternating current through the coils generates a continuously varying magnetic field that moves forward along the track. The frequency of the alternating current is synchronized to match the speed of the train. The offset between the field exerted by magnets on the train and the applied field creates a force moving the train forward.
Tracks
The term "maglev" refers not only to the vehicles, but to the railway system as well, specifically designed for magnetic levitation and propulsion. All operational implementations of maglev technology make minimal use of wheeled train technology and are not compatible with conventional rail tracks. Because they cannot share existing infrastructure, maglev systems must be designed as standalone systems. The SPM maglev system is inter-operable with steel rail tracks and would permit maglev vehicles and conventional trains to operate on the same tracks. MAN in Germany also designed a maglev system that worked with conventional rails, but it was never fully developed.[28]Evaluation
Each implementation of the magnetic levitation principle for train-type travel involves advantages and disadvantages.| Technology | Pros | Cons | ||
| EMS[31][32] (Electromagnetic suspension) | Magnetic fields inside and outside the vehicle are less than EDS; proven, commercially available technology; high speeds (500 km/h (310 mph)); no wheels or secondary propulsion system needed. | The separation between the vehicle and the guideway must be constantly monitored and corrected due to the unstable nature of electromagnetic attraction; to the system's inherent instability and the required constant corrections by outside systems may induce vibration. | ||
| EDS[33][34] (Electrodynamic suspension) |
Onboard magnets and large margin between rail and train enable highest recorded speeds (581 km/h (361 mph)) and heavy load capacity; demonstrated successful operations using high-temperature superconductors in its onboard magnets, cooled with inexpensive liquid nitrogen. | Strong magnetic fields on the train would make the train unsafe for passengers with pacemakers or magnetic data storage media such as hard drives and credit cards, necessitating the use of magnetic shielding; limitations on guideway inductivity limit maximum speed; vehicle must be wheeled for travel at low speeds. | ||
| Inductrack System[35][36] (Permanent Magnet Passive Suspension) | Failsafe Suspension—no power required to activate magnets; Magnetic field is localized below the car; can generate enough force at low speeds (around 5 km/h (3.1 mph)) for levitation; given power failure cars stop safely; Halbach arrays of permanent magnets may prove more cost-effective than electromagnets. | Requires either wheels or track segments that move for when the vehicle is stopped. Under development (as of 2008); No commercial version or full scale prototype. | ||
Neither Inductrack nor the Superconducting EDS are able to levitate vehicles at a standstill, although Inductrack provides levitation at much lower speed; wheels are required for these systems. EMS systems are wheel-free.
The German Transrapid, Japanese HSST (Linimo), and Korean Rotem EMS maglevs levitate at a standstill, with electricity extracted from guideway using power rails for the latter two, and wirelessly for Transrapid. If guideway power is lost on the move, the Transrapid is still able to generate levitation down to 10 km/h (6.2 mph) speed,[citation needed] using the power from onboard batteries. This is not the case with the HSST and Rotem systems.
Propulsion
EMS systems such as HSST/Linimo can provide both levitation and propulsion using an onboard linear motor. But EDS systems and some EMS systems such as Transrapid levitate but not not propel. Such systems need some other technology for propulsion. A linear motor (propulsion coils) mounted in the track is one solution. Over long distances coil costs could be prohibitive.Stability
Earnshaw's theorem shows that no combination of static magnets can be in a stable equilibrium.[37] Therefore a dynamic (time varying) magnetic field is required to achieve stabilization. EMS systems rely on active electronic stabilization that constantly measures the bearing distance and adjusts the electromagnet current accordingly. EDS systems rely on changing magnetic fields to create currents, which can give passive stability.Because maglev vehicles essentially fly, stabilisation of pitch, roll and yaw is required. In addition to rotation, surge (forward and backward motions), sway (sideways motion) or heave (up and down motions) can be problematic.
Superconducting magnets on a train above a track made out of a permanent magnet lock the train into its lateral position. It can move linearly along the track, but not off the track. This is due to the Meissner effect and flux pinning.
Guidance
Some systems use Null Current systems (also sometimes called Null Flux systems).[29][38] These use a coil that is wound so that it enters two opposing, alternating fields, so that the average flux in the loop is zero. When the vehicle is in the straight ahead position, no current flows, but any moves off-line create flux that generates a field that naturally pushes/pulls it back into line.Evacuated tubes
Some systems (notably the Swissmetro system) propose the use of vactrains—maglev train technology used in evacuated (airless) tubes, which removes air drag. This has the potential to increase speed and efficiency greatly, as most of the energy for conventional maglev trains is lost to aerodynamic drag.[39]One potential risk for passengers of trains operating in evacuated tubes is that they could be exposed to the risk of cabin depressurization unless tunnel safety monitoring systems can repressurize the tube in the event of a train malfunction or accident though since trains are likely to operated at or near the Earth's surface, emergency restoration of ambient pressure should be straightforward. The RAND Corporation has depicted a vacuum tube train that could, in theory, cross the Atlantic or the USA in ~21 minutes.[40]
Energy use
Energy for maglev trains is used to accelerate the train. Energy may be regained when the train slows down via regenerative braking". It also levitates and stabilises the train's movement. Most of the energy is needed to overcome "air drag". Some energy is used for air conditioning, heating, lighting and other miscellany.At low speeds the percentage of power (energy per time) used for levitation can be significant consuming up to 15% more power than a subway or light rail service.[41] For short distances the energy used for acceleration might be considerable.
The power used to overcome air drag increases with the cube of the velocity and hence dominates at high speed. The energy needed per mile increases by the square of the velocity and the time decreases linearly.) For example, two and half times as much power is needed to travel at 400 km/h than 300 km/h.[42]
Comparison with conventional trains
Maglev transport is non-contact and electric powered. It relies less or not at all on the wheels, bearings and axles common to wheeled rail systems.[43]- Speed: Maglev allows higher top speeds than conventional rail, but experimental wheel-based high-speed trains have demonstrated similar speeds.
- Maintenance: Maglev trains currently in operation have demonstrated the need for minimal guideway maintenance. Vehicle maintenance is also minimal (based on hours of operation, rather than on speed or distance traveled). Traditional rail is subject to mechanical wear and tear that increases exponentially with speed, also increasing maintenance.[43]
- Weather: Maglev trains are little affected by snow, ice, severe cold, rain or high winds. However, they have not operated in the wide range of conditions that traditional friction-based rail systems have operated.[citation needed] Maglev vehicles accelerate and decelerate faster than mechanical systems regardless of the slickness of the guideway or the slope of the grade because they are non-contact systems.[43]
- Track: Maglev trains are not compatible with conventional track, and therefore require custom infrastructure for their entire route. By contrast conventional high-speed trains such as the TGV are able to run, albeit at reduced speeds, on existing rail infrastructure, thus reducing expenditure where new infrastructure would be particularly expensive (such as the final approaches to city terminals), or on extensions where traffic does not justify new infrastructure. John Harding, former chief maglev scientist at the Federal Railroad Administration claimed that separate maglev infrastructure more than pays for itself with higher levels of all-weather operational availability and nominal maintenance costs. These claims have yet to be proven in an intense operational setting and does not consider the increased maglev construction costs.
- Efficiency: Conventional rail is probably more efficient at lower speeds. But due to the lack of physical contact between the track and the vehicle, maglev trains experience no rolling resistance, leaving only air resistance and electromagnetic drag, potentially improving power efficiency.[44] Some systems however such as the Central Japan Railway Company SCMaglev use rubber tires at low speeds, reducing efficiency gains.
- Weight: The electromagnets in many EMS and EDS designs require between 1 and 2 kilowatts per ton.[45] The use of superconductor magnets can reduce the electromagnets' energy consumption. A 50-ton Transrapid maglev vehicle can lift an additional 20 tons, for a total of 70 tons, which consumes 70-140 kW.[citation needed] Most energy use for the TRI is for propulsion and overcoming air resistance at speeds over 100 mph.[citation needed]
- Weight loading: High speed rail requires more support and construction for its concentrated wheel loading. Maglev cars are lighter and distribute weight more evenly.[46]
- Noise: Because the major source of noise of a maglev train comes from displaced air rather than from wheels touching rails, maglev trains produce less noise than a conventional train at equivalent speeds. However, the psychoacoustic profile of the maglev may reduce this benefit: a study concluded that maglev noise should be rated like road traffic, while conventional trains experience a 5–10 dB "bonus", as they are found less annoying at the same loudness level.[47][48][49]
- Braking: Braking and overhead wire wear have caused problems for the Fastech 360 rail Shinkansen. Maglev would eliminate these issues.
- Magnet reliability: At higher temperatures magnets may fail. New alloys and manufacturing techniques have addressed this issue.
- Control systems: No signalling systems are needed for high-speed rail, because such systems are computer controlled. Human operators cannot react fast enough to manage high-speed trains. High speed systems require dedicated rights of way and are usually elevated. Two maglev system microwave towers are in constant contact with trains. There is no need for train whistles or horns, either.
- Terrain: Maglevs are able to ascend higher grades, offering more routing flexibility and reduced tunneling.[46]
Comparison with aircraft
Differences between airplane and maglev travel:- Efficiency: For maglev systems the lift-to-drag ratio can exceed that of aircraft (for example Inductrack can approach 200:1 at high speed, far higher than any aircraft). This can make maglev more efficient per kilometer. However, at high cruising speeds, aerodynamic drag is much larger than lift-induced drag. Jets take advantage of low air density at high altitudes to significantly reduce air drag. Hence despite their lift-to-drag ratio disadvantage, they can travel more efficiently at high speeds than maglev trains that operate at sea level.[citation needed]
- Routing: While aircraft can theoretically take any route between points, commercial air routes are rigidly defined. Maglevs offer competitive journey times over distances of 800 kilometres (500 miles) or less. Additionally, maglevs can easily serve intermediate destinations.
- Availability: Maglevs are little affected by weather.[citation needed]
- Safety: Maglevs offer a significant safety margin since maglevs do not crash into other maglevs or leave their guideways.[50][51][52] Combustible aircraft fuel is a significant danger during takeoff and landing.
- Travel time: Maglevs do not face the extended security protocols faced by air travelers nor is time consumed for taxiing, or for queuing for take-off and landing.[citation needed]
Economics
The Shanghai maglev demonstration line cost US$1.2 billion to build.[53] This total includes capital costs such as right-of-way clearing, extensive pile driving, on-site guideway manufacturing, in-situ pier construction at 25 metre intervals, a maintenance facility and vehicle yard, several switches, two stations, operations and control systems, power feed system, cables and inverters, and operational training. Ridership is not a primary focus of this demonstration line, since the Longyang Road station is on the eastern outskirts of Shanghai. Once the line is extended to South Shanghai Train station and Hongqiao Airport station, ridership was expected to cover operation and maintenance costs and generate significant net revenue.[according to whom?]The South Shanghai extension was expected to cost approximately US$18 million per kilometre. In 2006 the German government invested $125 million in guideway cost reduction development that produced an all-concrete modular design that is faster to build and is 30% less costly. Other new construction techniques were also developed that put maglev at or below price parity with new high-speed rail construction.[54]
The United States Federal Railroad Administration, in a 2005 report to Congress, estimated cost per mile of between $50m and $100m.[55] The Maryland Transit Administration (MTA) Environmental Impact Statement estimated a pricetag at US$4.9 billion for construction, and $53 million a year for operations of its project.[56]
The proposed Chuo Shinkansen maglev in Japan was estimated to cost approximately US$82 billion to build, with a route requiring long tunnels. A Tokaido maglev route replacing the current Shinkansen would cost some 1/10 the cost, as no new tunnel would be needed, but noise pollution issues made this infeasible.[citation needed][neutrality is disputed]
The only low-speed maglev (100 km/h or 62 mph) currently operational, the Japanese Linimo HSST, cost approximately US$100 million/km to build.[57] Besides offering improved operation and maintenance costs over other transit systems, these low-speed maglevs provide ultra-high levels of operational reliability and introduce little noise[verification needed]and generate zero air pollution into dense urban settings.
As more maglev systems are deployed, experts expected construction costs to drop by employing new construction methods and from economies of scale.[58]
Records
The highest recorded maglev speed is 581 km/h (361 mph), achieved in Japan by JR Central's MLX01 superconducting maglev in 2003,[59][60] 6 km/h (3.7 mph) faster than the conventional TGV wheel-rail speed record. However, the operational and performance differences between these two very different technologies is far greater. The TGV record was achieved accelerating down a 72.4 km (45.0 mi) slight decline, requiring 13 minutes. It then took another 77.25 km (48.00 mi) for the TGV to stop, requiring a total distance of 149.65 km (92.99 mi) for the test.[61] The MLX01 record, however, was achieved on the 18.4 km (11.4 mi) Yamanashi test track – 1/8 the distance.[62] No maglev or wheel-rail commercial operation has actually been attempted at speeds over 500 km/h.History of maglev speed records
| Year | Country | Train | Speed | Notes |
|---|---|---|---|---|
| 1971 |  West Germany |
Prinzipfahrzeug | 90 km/h (56 mph) | |
| 1971 | West Germany |
TR-02 (TSST) | 164 km/h (102 mph) | |
| 1972 |  Japan |
ML100 | 60 km/h (37 mph) | Manned |
| 1973 | West Germany |
TR04 | 250 km/h (160 mph) | Manned |
| 1974 | West Germany |
EET-01 | 230 km/h (140 mph) | Unmanned |
| 1975 | West Germany |
Komet | 401 km/h (249 mph) | by steam rocket propulsion, unmanned |
| 1978 | Japan |
HSST-01 | 308 km/h (191 mph) | by supporting rockets propulsion, made in Nissan, unmanned |
| 1978 | Japan |
HSST-02 | 110 km/h (68 mph) | Manned |
| 1979-12-12 | Japan |
ML-500R | 504 km/h (313 mph) | (unmanned) It succeeds in operation over 500 km/h for the first time in the world. |
| 1979-12-21 | Japan |
ML-500R | 517 km/h (321 mph) | (unmanned) |
| 1987 | West Germany |
TR-06 | 406 km/h (252 mph) | (manned) |
| 1987 | Japan |
MLU001 | 401 km/h (249 mph) | (manned) |
| 1988 | West Germany |
TR-06 | 413 km/h (257 mph) | (manned) |
| 1989 | West Germany |
TR-07 | 436 km/h (271 mph) | (manned) |
| 1993 | Germany |
TR-07 | 450 km/h (280 mph) | (manned) |
| 1994 | Japan |
MLU002N | 431 km/h (268 mph) | (unmanned) |
| 1997 | Japan |
MLX01 | 531 km/h (330 mph) | (manned) |
| 1997 | Japan |
MLX01 | 550 km/h (340 mph) | (unmanned) |
| 1999 | Japan |
MLX01 | 552 km/h (343 mph) | (manned/five-car formation). Guinness authorization. |
| 2003 |  China |
Transrapid SMT (built in Germany) | 501 km/h (311 mph) | (manned/three formation) |
| 2003 | China |
Transrapid SMT | 476 km/h (296 mph) | (unmanned) |
| 2003 | Japan |
MLX01 | 581 km/h (361 mph) | (manned/three formation). Guinness authorization.[63] |
Systems
Test tracks
San Diego, USA
General Atomics has a 120-metre test facility in San Diego, that is used to test Union Pacific's 8 km (5.0 mi) freight shuttle in Los Angeles. The technology is "passive" (or "permanent"), using permanent magnets in a halbach array for lift and requiring no electromagnets for either levitation or propulsion. General Atomics received US$90 million in research funding from the federal government. They are also considering their technology for high-speed passenger services.[64]SCMaglev, Japan
Japan has a demonstration line in Yamanashi prefecture where test train SCMaglev MLX01 reached 581 km/h (361 mph), slightly faster than any wheeled trains.[citation needed]These trains use superconducting magnets which allow for a larger gap, and repulsive/attractive-type electrodynamic suspension (EDS).[29][65] In comparison Transrapid uses conventional electromagnets and attractive-type electromagnetic suspension (EMS). [60][66]
On 15th November 2014, The Central Japan Railway Company ran eight days of testing for the experimental maglev Shinkansen train on its test track in Yamanashi Prefecture. One hundred passengers covered a 42.8 km (27-mile) route between the cities of Uenohara and Fuefuki, reaching speeds of up to 500 km/h (311 mph).[67]
FTA's UMTD program
In the US, the Federal Transit Administration (FTA) Urban Maglev Technology Demonstration program funded the design of several low-speed urban maglev demonstration projects. It assessed HSST for the Maryland Department of Transportation and maglev technology for the Colorado Department of Transportation. The FTA also funded work by General Atomics at California University of Pennsylvania to evaluate the MagneMotion M3 and of the Maglev2000 of Florida superconducting EDS system. Other US urban maglev demonstration projects of note are the LEVX in Washington State and the Massachusetts-based Magplane.Southwest Jiaotong University, China
On 31 December 2000, the first crewed high-temperature superconducting maglev was tested successfully at Southwest Jiaotong University, Chengdu, China. This system is based on the principle that bulk high-temperature superconductors can be levitated stably above or below a permanent magnet. The load was over 530 kg (1,170 lb) and the levitation gap over 20 mm (0.79 in). The system uses liquid nitrogen to cool the superconductor.[68][69]Operational systems
Shanghai Maglev
In January 2001, the Chinese signed an agreement with Transrapid to build an EMS high-speed maglev line to link Pudong International Airport with Longyang Road Metro station on the eastern edge of Shanghai. This Shanghai Maglev Train demonstration line, or Initial Operating Segment (IOS), has been in commercial operations since April 2004[70] and now operates 115 (up from 110 daily trips in 2010) daily trips that traverse the 30 km (19 mi) between the two stations in 7 minutes, achieving a top speed of 431 km/h (268 mph) and averaging 266 km/h (165 mph).[71] On a 12 November 2003 system commissioning test run, it achieved 501 km/h (311 mph), its designed top cruising speed. The Shanghai maglev is faster than Birmingham technology and comes with on-time – to the second – reliability greater than 99.97%.[72]
Plans to extend the line to Shanghai South Railway Station and Hongqiao Airport on the western edge of Shanghai are on hold. After the Shanghai–Hangzhou Passenger Railway became operational in late 2010, the maglev extension became somewhat redundant and may be canceled.
Linimo (Tobu Kyuryo Line, Japan)
The commercial automated "Urban Maglev" system commenced operation in March 2005 in Aichi, Japan. The Tobu-kyuryo Line, otherwise known as the Linimo line, covers 9 km (5.6 mi). It has a minimum operating radius of 75 m (246 ft) and a maximum gradient of 6%. The linear-motor magnetically levitated train has a top speed of 100 km/h (62 mph). More than 10 million passengers used this "urban maglev" line in its first three months of operation. At 100 km/h (62 mph), it is sufficiently fast for frequent stops, has little or no noise impact on surrounding communities, can navigate short radius rights of way, and operates during inclement weather. The trains were designed by the Chubu HSST Development Corporation, which also operates a test track in Nagoya.[73]
Daejeon, South Korea
South Korea unveiled its first commercial maglev in May 2014. It was developed and built domestically. The country was the third to develop a maglev system (after Germany and Japan). It connects Incheon International Airport with Yongyu, cutting journey time.[74][75]
The first maglev test trials using electromagnetic suspension opened to public was HML-03, made by Hyundai Heavy Industries for the Daejeon Expo in 1993, after five years of research and manufacturing two prototypes, HML-01 and HML-02.[76][77][78] Government research on urban maglev using electromagnetic suspension began in 1994.[78] The first operating urban maglev was UTM-02 in Daejeon beginning on 21 April 2008 after 14 years of development and one prototype; UTM-01. The train runs on a 1 km (0.62 mi) track between Expo Park and National Science Museum.[79][80] Meanwhile UTM-02 conducted the world's first ever maglev simulation.[81][82] However UTM-02 is still the second prototype of a final model. The final UTM model of Rotem's urban maglev, UTM-03, was scheduled to debut at the end of 2014 in Incheon's Yeongjong island where Incheon International Airport is located.[83]
Under construction
AMT test track – Powder Springs, Georgia
A second prototype system in Powder Springs, Georgia, USA, was built by American Maglev Technology, Inc. The test track is 2,000' long with a 550' curve. Vehicles are operated up to 37 mph, below the proposed operational maximum of 60 mph. A June 2013 review of the technology called for an extensive testing program to be carried out to ensure the system complies with various regulatory requirements including the American Society of Civil Engineers (ASCE) People Mover Standard. The review noted that the test track is too short to assess the vehicles' dynamics at the maximum proposed speeds.[84]Beijing S1 line
The Beijing municipal government is building China's first low-speed maglev line, the Line S1, BCR, using technology developed by Defense Technology University. It is a 10.2 km (6.3 mi) long S1-West commuter rail line, which, together with seven other conventional lines, began construction on 28 February 2011. The top speed will be 105 km/h (65 mph). This project was scheduled to be completed in 2015.[85]Changsha Maglev
The Hunan provincial government launched the construction of a maglev line between Changsha Huanghua International Airport and Changsha South Railway Station. Construction started in May 2014, to be completed by the end of 2015.[86][87]Incheon Airport maglev
Directly above Incheon International Airport Station is the upcoming Incheon Airport Maglev. When the first of three planned phases opens it will be 6.1 kilometres (3.8 mi) long, with six stations and a 110 km/h (68 mph) operating speed. OPerations began in July 2014.[88]Tokyo – Nagoya – Osaka
Construction of Chuo Shinkansen began in 2014. It was expected to begin operations by 2027.[89] The plan for the Chuo Shinkansen bullet train system was finalized based on the Law for Construction of Countrywide Shinkansen. The Linear Chuo Shinkansen Project aimed to operate the Superconductive Magnetically Levitated Train to connect Tokyo and Osaka by way of Nagoya, the capital city of Aichi, in approximately one hour at a speed of 500 km/h (310 mph).[90] The full track between Tokyo and Osaka was to be completed in 2045.[91][92]
SkyTran - Tel Aviv (Israel)
Skytran announced it would build an elevated network of sky cars in Tel Aviv, Israel. The technology was developed by NASA with the support of Israel Aerospace Industries.[93] The system was meant to be suspended from an elevated track. The vehicles would travel at 70km/h (43mph) although the commercial rollout was expected to offer much faster vehicles. A trial of the system was to be built with a test track on the campus of Israel Aerospace Industries. Once successful, a full commercial version of SkyTran was expected to be rolled out first in Tel Aviv.[94] The trial was scheduled to be up and running by the end of 2015.[95][96] The company stated that speeds of up to 240km/h (150mph) are achievable.[97]Proposed systems
Many maglev systems have been proposed in North America, Asia and Europe.[98] Many are in the early planning stages or were explicitly rejected.Australia
- Sydney-Illawarra
- Melbourne
The proposed Melbourne maglev connecting the city of Geelong through Metropolitan Melbourne's outer suburban growth corridors, Tullamarine and Avalon domestic in and international terminals in under 20 mins and on to Frankston, Victoria, in under 30 minutes
In late 2008, a proposal was put forward to the Government of Victoria to build a privately funded and operated maglev line to service the Greater Melbourne metropolitan area in response to the Eddington Transport Report that did not investigate above-ground transport options.[100][101] The maglev would service a population of over 4 million[citation needed] and the proposal was costed at A$8 billion.
However despite road congestion and Australia's highest roadspace per capita,[citation needed] the government dismissed the proposal in favour of road expansion including an A$8.5 billion road tunnel, $6 billion extension of the Eastlink to the Western Ring Road and a $700 million Frankston Bypass.
Italy
A first proposal was formalized on April 2008, in Brescia, by journalist Andrew Spannaus who recommended a high speed connection between Malpensa airport to the cities of Milan, Bergamo and Brescia.[102]On March 2011 Nicola Oliva proposed a maglev connection between Pisa airport and the cities of Prato and Florence (Santa Maria Novella train station and Florence Airport).[103][104] The travelling time would be reduced from the typical hour and a quarter to around twenty minutes.[105] The second part of the line would be a connection to Livorno, to integrate maritime, aerial and terrestrial transport systems.[106][107]
United Kingdom
London – Glasgow: A line[108] was proposed in the United Kingdom from London to Glasgow with several route options through the Midlands, Northwest and Northeast of England. It was reported to be under favourable consideration by the government.[109] The approach was rejected in the Government White Paper Delivering a Sustainable Railway published on 24 July 2007.[110] Another high-speed link was planned between Glasgow and Edinburgh but the technology remained unsettled.[111][112][113]United States
Union Pacific freight conveyor: Plans are under way by American rail road operator Union Pacific to build a 7.9 km (4.9 mi) container shuttle between the ports of Los Angeles and Long Beach, with UP's intermodal container transfer facility. The system would be based on "passive" technology, especially well suited to freight transfer as no power is needed on board. The vehicle is a chassis that glides to its destination. The system is being designed by General Atomics.[64]California-Nevada Interstate Maglev: High-speed maglev lines between major cities of southern California and Las Vegas are under study via the California-Nevada Interstate Maglev Project.[114] This plan was originally proposed as part of an I-5 or I-15 expansion plan, but the federal government ruled that it must be separated from interstate public work projects.
After the decision, private groups from Nevada proposed a line running from Las Vegas to Los Angeles with stops in Primm, Nevada; Baker, California; and other points throughout San Bernardino County into Los Angeles. Politicians expressed concern that a high-speed rail line out of state would carry spending out of state along with travelers.
Baltimore – Washington D.C. Maglev: A 64 km (40 mi) project has been proposed linking Camden Yards in Baltimore and Baltimore-Washington International (BWI) Airport to Union Station in Washington, D.C.[115]
The Pennsylvania Project: The Pennsylvania High-Speed Maglev Project corridor extends from the Pittsburgh International Airport to Greensburg, with intermediate stops in Downtown Pittsburgh and Monroeville. This initial project was claimed to serve approximately 2.4 million people in the Pittsburgh metropolitan area. The Baltimore proposal competed with the Pittsburgh proposal for a US$90 million federal grant.[116]
San Diego-Imperial County airport: In 2006 San Diego commissioned a study for a maglev line to a proposed airport located in Imperial County. SANDAG claimed that the concept would be an "airports [sic] without terminals", allowing passengers to check in at a terminal in San Diego ("satellite terminals"), take the train to the airport and directly board the airplane. In addition, the train would have the potential to carry freight. Further studies were requested although no funding was agreed.[117]
Orlando International Airport to Orange County Convention Center: In December 2012 the Florida Department of Transportation gave conditional approval to a proposal by American Maglev to build a privately run 14.9-mile, 5-station line from Orlando International Airport to Orange County Convention Center. The Department requested a technical assessment and said there would be a request for proposals issued to reveal any competing plans. The route requires the use of a public right of way.[118] If the first phase succeeded American Maglev would propose two further phases (4.9 miles and 19.4 miles) to carry the line to Walt Disney World.[119]
Puerto Rico
San Juan – Caguas: A 16.7-mile (26.8 km) maglev project was proposed linking Tren Urbano's Cupey Station in San Juan with two proposed stations in the city of Caguas, south of San Juan. The maglev line would run along Highway PR-52, connecting both cities. According to American Maglev project cost would be approximately US$380 million.[120][121][122]Germany
On 25 September 2007, Bavaria announced a high-speed maglev-rail service from Munich to its airport. The Bavarian government signed contracts with Deutsche Bahn and Transrapid with Siemens and ThyssenKrupp for the €1.85 billion project.[123]On 27 March 2008, the German Transport minister announced the project had been cancelled due to rising costs associated with constructing the track. A new estimate put the project between €3.2–3.4 billion.[124]
Switzerland
SwissRapide: The SwissRapide AG together with the SwissRapide Consortium was planning and developing the first maglev monorail system for intercity traffic the country's between major cities. SwissRapide was to be financed by private investors. In the long-term, the SwissRapide Express was to connect the major cities north of the Alps between Geneva and St. Gallen, including Lucerne and Basel. The first projects were Bern – Zurich, Lausanne – Geneva as well as Zurich – Winterthur. The first line (Lausanne – Geneva or Zurich – Winterthur) could go into service as early as 2020.[125][126]Swissmetro: An earlier project, Swissmetro AG envisioned a partially evacuated underground maglev. As with SwissRapide, Swissmetro envisioned connecting the major cities in Switzerland with one another. In 2011, Swissmetro AG was dissolved and the IPRs from the organisation were passed onto the EPFL in Lausanne.[127]
China
Shanghai – HangzhouChina planned to extend the existing Shanghai Maglev Train,[128] initially by some 35 kilometres to Shanghai Hongqiao Airport and then 200 kilometres to the city of Hangzhou (Shanghai-Hangzhou Maglev Train). If built, this would be the first inter-city maglev rail line in commercial service.
The project was controversial and repeatedly delayed. In May 2007 the project was suspended by officials, reportedly due to public concerns about radiation from the system.[129] In January and February 2008 hundreds of residents demonstrated in downtown Shanghai that the line route came too close to their homes, citing concerns about sickness due to exposure to the strong magnetic field, noise, pollution and devaluation of property near to the lines.[130][131] Final approval to build the line was granted on 18 August 2008. Originally scheduled to be ready by Expo 2010,[132] plans called for completion by 2014. The Shanghai municipal government considered multiple options, including undergrounding the line to allay public fears. This same report stated that the final decision had to be approved by the National Development and Reform Commission.[133]
In 2007 the Shanghai municipal government was considering build a factory in Nanhui district to produce low-speed maglev trains for urban use.[134]
Shanghai - Beijing
A proposed line would have connected Shanghai to Beijing, over a distance of 800 miles, at an estimated cost of £15.5bn.[135] No projects had been revealed as of 2014.[136]
India
Mumbai – DelhiA project was presented to Indian railway minister (Mamta Banerjee) by an American company to connect Mumbai and Delhi. Then Prime Minister Manmohan Singh said that if the line project was successful the Indian government would build lines between other cities and also between Mumbai Central and Chhatrapati Shivaji International Airport.[137]
Mumbai – Nagpur
The State of Maharashtra approved a feasibility study for a maglev train between Mumbai and Nagpur, some 1,000 km (620 mi) apart.[138]
Chennai – Bangalore – Mysore
A detailed report was to be prepared and submitted by December 2012 for a line to connect Chennai to Mysore via Bangalore at a cost $26 million per kilometre, reaching speeds of 350 km/h.[139]
Malaysia
A Consortium led by UEM Group Bhd and ARA Group, proposed Maglev technology to link Malaysian cities to Singapore. The idea was first mooted by YTL Group. Its technology partner then was said to be Siemens. High costs sank the proposal. The concept of a high-speed rail link from Kuala Lumpur to Singapore resurfaced. It was cited as a proposed "high impact" project in the Economic Transformation Programme (ETP) that was unveiled in 2010. [140]Iran
In May 2009, Iran and a German company signed an agreement to use maglev to link Tehran and Mashhad. The agreement was signed at the Mashhad International Fair site between Iranian Ministry of Roads and Transportation and the German company. The 900 km (560 mi) line allegedly could reduce travel time between Tehran and Mashhad to about 2.5 hours.[141] Munich-based Schlegel Consulting Engineers said they had signed the contract with the Iranian ministry of transport and the governor of Mashad. "We have been mandated to lead a German consortium in this project," a spokesman said. "We are in a preparatory phase." The next step will be assemble a consortium, a process that is expected to take place "in the coming months," the spokesman said. The project could be worth between 10 billion and 12 billion euros,[citation needed] the Schlegel spokesman said.Transrapid developers Siemens and ThyssenKrupp both said they were unaware of the proposal. The Schlegel spokesman said Siemens and ThyssenKrupp were currently "not involved." in the consortium[142]
Taiwan
Low speed maglev (urban maglev) is proposed for YangMingShan MRT Line for Taipei, a circular line connecting Taipei City to Taipei County, & almost all other Taipei transport routes, but especially the access starved northern suburbs of Tien Mou and YangMingShan. From these suburbs to the city, transit times would be reduced by 70% or more compared to peak hours, and between Tien Mou and YangMingShan, from approx 20 minutes, to 3 minutes. Key to the line is YangMingShan Station, at ‘Taipei level’ in the mountain, 200M below YangMingShan (YangMing Mountain) Village, with 40 second high speed elevators to the Village.Linimo or a similar system would be preferred, as being the core of Taipeis’ public transport system, it should run 24 hours/day. Also, in certain areas it would run within metres of apartments, so the near silent operation, and minimal maintenance requirements of maglev would be major features.
An extension of the line could run to Chiang Kai Shek Airport, and possibly on down the island, passing through the major population centres which the High Speed Rail must avoid. The minimal vibration of maglev would also be suitable to provide access Hsinchu Science Park, where sensitive silicon foundries are located. In the other direction, connection to the Tansui Line and to High Speed ferries at Tansui would provide overnight travel to ShangHai and Nagasaki, and to Busan or Mokpo in South Korea, thus interconnecting the public transport systems of four countries, with great savings in fossil fuel consumption compared to flight.
YangMingShan MRT Line won the 'Engineering Excellence' Award, at the 2013 World Metro Summit in Shanghai. More at vimeo.com/11785326.
Hong Kong
The Express Rail Link, previously known as the Regional Express, which will connect Kowloon with the territory's border with China, explored different technologies and designs in its planning stage, between Maglev and conventional highspeed railway, and if the latter was chosen, between a dedicated new route and sharing the tracks with the existing West Rail. Finally conventional highspeed with dedicated new route was chosen. It is expected to be operational in 2017.Incidents
Two incidents involved fires. A Japanese test train in Miyazaki, MLU002, was completely consumed in a fire in 1991.[143]On 11 August 2006, a fire broke out on the commercial Shanghai Transrapid shortly after arriving at the Longyang terminal. People were evacuated without incident before the vehicle was moved about 1 kilometre to keep smoke from filling the station. NAMTI officials toured the SMT maintenance facility in November 2010 and learned that the cause of the fire was "thermal runaway" in a battery tray. As a result, SMT secured a new battery vendor, installed new temperature sensors and insulators and redesigned the trays.[citation needed]
On 22 September 2006, a Transrapid train collided with a maintenance vehicle on a test/publicity run in Lathen (Lower Saxony / north-western Germany).[144][145] Twenty-three people were killed and ten were injured; these were the first maglev crash fatalities. The accident was caused by human error. Charges were brought against three Transrapid employees after a year-long investigation.[146]
_2014.jpg)
