Search This Blog

Sunday, May 24, 2015

Geology of the Grand Canyon area


From Wikipedia, the free encyclopedia

Wide canyon with exposed red- and tan-colored rock
The Grand Canyon from Navajo Point. The Colorado River is to the right and the North Rim is visible at left in the distance. The view shows nearly every sedimentary layer described in this article.

The geology of the Grand Canyon area includes one of the most complete and studied sequences of rock on Earth. The nearly 40 major sedimentary rock layers exposed in the Grand Canyon and in the Grand Canyon National Park area range in age from about 200 million to nearly 2 billion years old. Most were deposited in warm, shallow seas and near ancient, long-gone sea shores in western North America. Both marine and terrestrial sediments are represented, including fossilized sand dunes from an extinct desert. There are at least 14 known unconformities in the geologic record found in the Grand Canyon area.

Uplift of the region started about 75 million years ago during the Laramide orogeny; a mountain-building event that is largely responsible for creating the Rocky Mountains to the east. In total, the Colorado Plateau was uplifted an estimated 2 miles (3.2 km). The adjacent Basin and Range province to the west started to form about 18 million years ago as the result of crustal stretching. A drainage system that flowed through what is today the eastern Grand Canyon emptied into the now lower Basin and Range province. Opening of the Gulf of California around 6 million years ago enabled a large river to cut its way northeast from the gulf. The new river captured the older drainage to form the ancestral Colorado River, which in turn started to form the Grand Canyon.

Wetter climates brought upon by ice ages starting 2 million years ago greatly increased excavation of the Grand Canyon, which was nearly as deep as it is now by 1.2 million years ago. Volcanic activity deposited lava over the area 1.8 million to 500,000 years ago. At least 13 lava dams blocked the Colorado River, forming lakes that were up to 2,000 feet (610 m) deep. The end of the last ice age and subsequent human activity has greatly reduced the ability of the Colorado River to excavate the canyon. Dams in particular have upset patterns of sediment transport and deposition. Controlled floods from Glen Canyon Dam upstream have been conducted to see if they have a restorative effect. Earthquakes and mass wasting erosive events still affect the region.
An exhibit with different rock layers cut out from a canyon wall
Figure 1. A geologic cross section of the Grand Canyon. Black numbers correspond to subsection numbers in section 1 and white numbers are referred to in the text

Deposition of sediments

A stout pillar of motored irregular-shaped stone with insets of stacked more brick-shaped rock forming a column slanting to the right. A plaque on the pillar reads: "Grand Canyon Strata, Courtesy of Grand Canyon National Park".
Stones from each of the strata in an exhibit in Heritage Square in Flagstaff

Vishnu Basement Rocks

Gray and reddish rock face with rough surface adjacent to a river.
The Vishnu Basement Rocks was deposited as volcanic rocks and sediments but were later metamorphosed and intruded by igneous rock.

At about 2.5 and 1.8 billion years ago in Precambrian time, sand, mud, silt, and ash were laid down in a marine basin adjacent to an orogenic belt.[1] From 1.8 to 1.6 billion years ago at least two island arcs collided with the proto-North American continent.[2] This process of plate tectonics compressed and grafted the marine sediments in the basin onto the mainland and uplifted them out of the sea. Later, these rocks were buried 12 miles (19 km) under the surface and pressure-cooked into metamorphic rock.[3] The resulting Granite Gorge Metamorphic Suite, which is part of the Vishnu Basement Rocks, consists of the metasedimentary Vishnu Schist and the metavolcanic Brahma and Rama Schists that were formed 1.75 billion to 1.73 billion years ago.[4] This is the resistant rock now exposed at the bottom of the canyon in the Inner Gorge.

As the volcanic islands collided with the mainland around 1.7 billion years ago, blobs of magma rose from the subduction zone and intruded the Granite Gorge Metamorphic Suite.[5] These plutons slowly cooled to form the Zoroaster Granite; part of which would later be metamorphosed into gneiss. This rock unit can be seen as light-colored bands in the darker garnet-studded Vishnu Schist (see 1b in figure 1). The intrusion of the granite occurred in three phases: two during the initial Vishnu metamorphism period, and a third around 1.4 billion years ago.[6] The third phase was accompanied by large-scale faulting, particularly along north—south faults, leading to a partial rifting of the continent.[3] The collision expanded the continent from the WyomingColorado border into Mexico and almost doubled the crust's thickness in the Grand Canyon region.[5] Part of this thickening created the 5-to-6-mile (8 to 10 km) high ancestral Mazatzal Mountains.[7]

Subsequent erosion lasting 300 million years stripped much of the exposed sediments and the mountains away.[8] This reduced the very high mountains to small hills a few tens to hundreds of feet (tens of meters) high.[2] Geologist John Wesley Powell called this major gap in the geologic record, which is also seen in other parts of the world, the Great Unconformity.[8] Other sediments may have been added but, if they ever existed, were completely removed by erosion. Such gaps in the geologic record are called unconformities by geologists. The Great Unconformity is one of the best examples of an exposed nonconformity, which is a type of unconformity that has bedded rock units above igneous or metamorphic rocks.[9]

Grand Canyon Supergroup

In late Precambrian time, extension from a large tectonic plate or smaller plates moving away from Laurentia thinned its continental crust, forming large rift basins that would ultimately fail to split the continent.[5] Eventually, this sunken region of Laurentia was flooded with a shallow seaway that extended from at least present-day Lake Superior to Glacier National Park in Montana to the Grand Canyon and the Uinta Mountains.[2] The resulting Grand Canyon Supergroup of sedimentary units is composed of nine varied geologic formations that were laid down from 1.2 billion and 740 million years ago in this sea.[10] Good exposures of the supergroup can be seen in eastern Grand Canyon in the Inner Gorge and from Desert View, Lipan Point and Moran point.[11][note 1]
Layered dark brown rock in stairstep pattern in ledges above a river in a canyon with exposed reddish and tan rock
The Cardenas Basalt was laid on top of the rest of the Grand Canyon Supergroup

The oldest section of the supergroup is the Unkar Group. It accumulated in a variety of fluvial, deltaic, tidal, nearshore marine, and offshore marine environments. The first formation to be laid down in the Unkar Group was the Bass Formation. Fluvial gravels initially accumulated in shallow river valleys. They later lithified into a basal conglomerate that is known as the Hotauta Member of the Bass Formation.[12] The Bass Formation was deposited in a shallow sea near the coast as a mix of limestone, sandstone, and shale. Diagenesis later altered the bulk of the limestone into dolomite. It is 120 to 340 feet (37 to 100 m) thick and grayish in color.[9] Averaging 1250 million years old, this is the oldest layer exposed in the Grand Canyon that contains fossils—stromatolites.[11] Hakatai Shale is made of thin beds of marginal-marine-derived mudstones, sandstones, and shale that, together, are 445 to 985 feet (136 to 300 m) thick.[13] This formation indicates a short-lived regression (retreat) of the seashore in the area that left mud flats.[9] Today it is very bright orange-red and gives the Red Canyon its name. Shinumo Quartzite is a resistant marine sedimentary quartzite that was eroded to form monadnocks that later became islands in Cambrian time. Those islands withstood wave action long enough to become re-buried by other sediments in the Cambrian Period.[9] Dox Formation is over 3,000 feet (910 m) thick and is made of sandstone with some interbedded shale beds and mudstone that were deposited in fluvial and tidal environments.[14] Ripple marks and other features indicate it was close to the shore. Outcrops of this red to orange formation can be seen in the eastern parts of the canyon. Fossils of stromatolites and algae are found in this layer. At 1070 ± 70 million years old, the Cardenas Basalt is the youngest formation in the Unkar Group.[15] It is made of layers of dark brown basaltic rocks that flowed as lava up to 1,000 feet (300 m) thick.[9]

Nankoweap Formation is around 1050 million years old and is not part of a group.[16] This rock unit is made of coarse-grained sandstone, and was deposited in a shallow sea on top of the eroded surface of the Cardenas Basalt.[9] The Nankoweap is only exposed in the eastern part of the canyon. A gap in the geologic record, an unconformity, follows the Nankoweap.
A ledge made of pebbly rock with lichen on it.
Sixtymile Formation is the last rock unit in the Chuar Group


All formations in the Chuar Group were deposited in coastal and shallow sea environments about 1000 to 700 million years ago.[17] The Galeros Formation is a mainly greenish formation composed of interbedded sandstone, limestone, and shale. Fossilized stromatolites are found in the Galeros.[18] The Kwagunt Formation consists of black shale and red to purple mudstone with some limestone.[19] Isolated pockets of reddish sandstone are also found around Carbon Butte. Stromatolites are found in this layer.[20] The Sixtymile Formation is made of tan-colored sandstone with some small sections of shale.

About 800 million years ago the supergroup was tilted 15° and block faulted in the Grand Canyon Orogeny.[21][22] Some of the block units moved down and others moved up while fault movement created north—south-trending fault-block mountain ranges.[9] About 100 million years of erosion took place that washed most of the Chuar Group away along with part of the Unkar Group (exposing the Shinumo Quartzite as previously explained). The mountain ranges were reduced to hills, and in some places, the whole 12,000 feet (3,700 m) of the supergroup were removed entirely, exposing the basement rocks below.[5] Any rocks that were deposited on top of the Grand Canyon Supergroup in the Precambrian were completely removed. This created a major unconformity that represents 460 million years of lost geologic history in the area.[23]

Tonto Group

During the Paleozoic era, the western part of what would become North America was near the equator and on a passive margin.[23] The Cambrian Explosion of life took place over about 15 million years in this part of the world.[24] Climate was warm and invertebrates, such as the trilobites, were abundant.[25] An ocean started to return to the Grand Canyon area from the west about 550 million years ago.[9] As its shoreline moved east, the ocean began to concurrently deposit the three formations of the Tonto Group.
Wide canyon with steep tan colored walls. A river inside a valley is below a broad gently sloping surface.
Tonto Group is most easily seen as the broad Tonto Platform just above the Colorado River

Tapeats Sandstone averages 525 million years old and is made of medium- to coarse-grained sand and conglomerate that was deposited on an ancient shore (see 3a in figure 1).[10] Ripple marks are common in the upper members of this dark brown thin-bedded layer. Fossils and imprint trails of trilobites and brachiopods have also been found in the Tapeats. Today it is a cliff-former that is 100 to 325 feet (30 to 100 m) thick.[26] Bright Angel Shale averages 515 million years old and is made of mudstone-derived shale that is interbedded with small sections of sandstone and shaly limestone with a few thin beds of dolomite.[10] It was mostly deposited as mud just offshore and contains brachiopod, trilobite, and worm fossils (see 3b in figure 1). The color of this formation is mostly various shades of green with some brownish-tan to gray parts. It is a slope-former and is 270 to 450 feet (82 to 137 m) thick.[27] Glauconite is responsible for the green coloration of the Bright Angel.[28] Muav Limestone averages 505 million years old and is made of gray, thin-bedded limestone that was deposited farther offshore from calcium carbonate precipitates (see 3c in figure 1).[10] It is fossil poor yet trilobites and brachiopods have been found in it. The western part of the canyon has a much thicker sequence of Muav than the eastern part.[29] The Muav is a cliff-former, 136 to 827 feet (41 to 252 m) thick.[30]

These three formations were laid down over a period of 30 million years from early-to-middle Cambrian time.[31] Trilobites followed by brachiopods are the most commonly reported fossils in this group but well-preserved fossils are relatively rare.[30] We know that the shoreline was transgressing (advancing onto land) because finer grade material was deposited on top of coarser-grained sediment.[31] Today, the Tonto Group makes up the Tonto Platform seen above and following the Colorado River; the Tapeats Sandstone and Muav Limestone form the platform's cliffs and the Bright Angel Shale forms its slopes.[31] Unlike the Proterozoic units below it, the Tonto Group's beds basically lie in their original horizontal position. The Bright Angel Shale in the group forms an aquiclude (barrier to groundwater seeping down), and thus collects and directs water through the overlying Muav Limestone to feed springs in the Inner Gorge.

Temple Butte, Redwall, and Surprise Canyon

The next two periods of geologic history, the Ordovician and the Silurian, are missing from the Grand Canyon sequence.[25] Geologists do not know if sediments were deposited in these periods and were later removed by erosion or if they were never deposited in the first place.[31] Either way, this break in the geologic history of the area spans about 65 million years. A type of unconformity called a disconformity was formed.[32] Disconformities show erosional features such as valleys, hills and cliffs that are later covered by younger sediments.
Annotated photo of different colored rock units on a cliff.
Temple Butte Limestone was deposited on the eroded surface of the Muav Limestone. It in turn was buried by Redwall Limestone

Geologists do know that deep channels were carved on the top of the Muav Limestone during this time.[31][32] Streams were the likely cause, but marine scour may be to blame. Either way, these depressions were filled with freshwater limestone about 385 million years ago in the Middle Devonian in a formation that geologists call the Temple Butte Limestone (see 4a in figure 1).[10] Marble Canyon in the eastern part of the park displays these filled purplish-colored channels well.[31] Temple Butte Limestone is a cliff-former in the western part of the park where it is gray to cream-colored dolomite. Fossils of animals with backbones are found in this formation; bony plates from freshwater fish in the eastern part and numerous marine fish fossils in the western part. Temple Butte is 100 to 450 feet (30 to 137 m) thick; thinner near Grand Canyon Village and thicker in western Grand Canyon.[33] An unconformity representing 40 to 50 million years of lost geologic history marks the top of this formation.[34]

The next formation in the Grand Canyon geologic column is the cliff-forming Redwall Limestone, which is 400 to 800 feet (120 to 240 m) thick (see 4b in figure 1).[35] Redwall is composed of thick-bedded, dark brown to bluish gray limestone and dolomite with white chert nodules mixed in.[31] It was laid down in a retreating shallow tropical sea near the equator during 40 million years of the early-to-middle Mississippian.[36] Many fossilized crinoids, brachiopods, bryozoans, horn corals, nautiloids, and sponges, along with other marine organisms such as large and complex trilobites have been found in the Redwall.[31] In late Mississippian time, the Grand Canyon region was slowly uplifted and the Redwall was partly eroded away. A Karst topography consisting of caves, sinkholes, and subterranean river channels resulted but were later filled with more limestone.[8] The exposed surface of Redwall gets its characteristic color from rainwater dripping from the iron-rich redbeds of the Supai and Hermit shale that lie above.[31]

Surprise Canyon Formation is a sedimentary layer of purplish-red shale that was laid down in discontinuous beds of sand and lime above the Redwall (see 4c in figure 1). It was created in very late Mississippian and possibly in very earliest Pennsylvanian time as the land subsided and tidal estuaries filled river valleys with sediment.[31] This formation only exists in isolated lenses that are 50 to 400 feet (15 to 122 m) thick.[37] Surprise Canyon was unknown to science until 1973 and can be reached only by helicopter.[36] Fossil logs, other plant material and marine shells are found in this formation.[31] An unconformity marks the top of the Surprise Canyon Formation and in most places this unconformity has entirely removed the Surprise Canyon and exposed the underlying Redwall.

Supai Group

Tan- to cream-colored layer cliff face above water
Supai Group with a stranded log from a pre-Glen Canyon Dam flood

An unconformity of 15 to 20 million years separates the Supai Group from the previously deposited Redwall Formation.[36] Supai Group was deposited in late Mississippian, through the Pennsylvanian and into the early Permian time, some 320 million to 270 million years ago.[38] Both marine and non-marine deposits of mud, silt, sand and calcareous sediments were laid down on a broad coastal plain similar to the Texas Gulf Coast of today.[38] Around this time, the Ancestral Rocky Mountains rose in Colorado and New Mexico and streams brought eroded sediment from them to the Grand Canyon area.[39]

Supai Group formations in the western part of the canyon contain limestone, indicative of a warm, shallow sea, while the eastern part was probably a muddy river delta. This formation consists of red siltstones and shale capped by tan-colored sandstone beds that together reach a thickness of 600 to 700 ft (around 200 m).[31] Shale in the early Permian formations in this group were oxidized to a bright red color. Fossils of amphibian footprints, reptiles, and plentiful plant material are found in the eastern part and increasing numbers of marine fossils are found in the western part.[40]

Formations of the Supai Group are from oldest to youngest (an unconformity is present at the top of each): Watahomigi (see 5a in figure 1) is a slope-forming gray limestone with some red chert bands, sandstone, and purple siltstone that is 100 to 300 feet (30 to 90 m) thick.[41] Manakacha (see 5b in figure 1) is a cliff- and slope-forming pale red sandstone and red shale that averages 300 feet (90 m) thick in Grand Canyon.[42] Wescogame (see 5c in figure 1) is a ledge- and slope-forming pale red sandstone and siltstone that is 100 to 200 feet (30 to 60 m) thick.[43] Esplanade (see 5d in figure 1) is a ledge- and cliff-forming pale red sandstone and siltstone that is 200 to 800 feet (60 to 200 m) thick.[44] An unconformity marks the top of the Supai Group.

Hermit, Coconino, Toroweap, and Kaibab

Like the Supai Group below it, the Permian-aged Hermit Formation was probably deposited on a broad coastal plain (see 6a in figure 1).[38] The alternating thin-bedded iron oxide, mud and silt were deposited via freshwater streams in a semiarid environment around 280 million years ago.[10] Fossils of winged insects, cone-bearing plants, and ferns are found in this formation as well as tracks of vertebrate animals.[32] It is a soft, deep red shale and mudstone slope-former that is approximately 100 to 900 feet (30 to 274 m) thick.[45] Slope development will periodically undermine the formations above and car- to house-sized blocks of that rock will cascade down onto the Tonto Platform. An unconformity marks the top of this formation .
Indentations of roundish footprints with claw or toe marks in tan-colored rock
Lizard-like animals left their footprints in Coconino Sandstone

Coconino Sandstone formed about 275 million years ago as the area dried out and sand dunes made of quartz sand invaded a growing desert (see 6b in figure 1).[10] Some Coconino fills deep mudcracks in the underlying Hermit Shale[38] and the desert that created the Coconino lasted for 5 to 10 million years.[46] Today, the Coconino is a 57 to 600 feet (17 to 183 m) thick golden white to cream-colored cliff-former near the canyon's rim.[47] Eolian (wind-created) cross bedding patterns of the frosted, well-sorted and rounded sand can be seen in its fossilized sand dunes.[32][48] Also fossilized are tracks from lizard-like creatures and what look like tracks from millipedes and scorpions.[49] An unconformity marks the top of this formation.
Dark mass in bluish gray rock with shells in it.
Fossils, such as this brachiopod and fragments of crinoids, are common in the Toroweap and Kaibab formations

Next in the geologic column is the 200-foot (60 m)-thick Toroweap Formation (see 6c in figure 1).[40] It consists of red and yellow sandstone and shaly gray limestone interbedded with gypsum.[40] The formation was deposited in a warm, shallow sea as the shoreline transgressed (invaded) and regressed (retreated) over the land.[40] The average age of the rock is about 273 million years.[10] In modern times it is a ledge- and slope-former that contains fossils of brachiopods, corals, and mollusks along with other animals and various terrestrial plants.[40] The Toroweap is divided into the following three members:[50] Seligman is a slope-forming yellowish to reddish sandstone and siltstone. Brady Canyon is a cliff-forming gray limestone with some chert. Wood Ranch is a slope-forming pale red and gray siltstone and dolomitic sandstone. An unconformity marks the top of this formation.

One of the highest, and therefore youngest, formations seen in the Grand Canyon area is the Kaibab Limestone (see 6d in figure 1). It erodes into ledgy cliffs that are 300 to 400 feet (90 to 100 m) thick[51] and was laid down in latest early Permian time, about 270 million years ago.[10] Kaibab was deposited in the deeper parts of the same advancing warm, shallow sea where the underlying Toroweap was formed. The formation is typically made of sandy limestone sitting on top of a layer of sandstone, but in some places sandstone and shale are near or at the top.[29] This is the cream to grayish-white rock that park visitors stand on while viewing the canyon from both rims.
It is also the surface rock covering much of the Kaibab Plateau just north of the canyon and the Coconino Plateau immediately south. Shark teeth have been found in this formation as well as abundant fossils of marine invertebrates such as brachiopods, corals, mollusks, sea lilies, and worms. An unconformity marks the top of this formation.

Mesozoic deposition

A large mound of rock and dirt with reddish and grayish soil and mostly covered with vegetation.
Reddish Moenkopi outcrop below volcanic rubble on Red Butte

Uplift marked the start of the Mesozoic and streams started to incise the newly dry land. Streams flowing through broad low valleys in Triassic time deposited sediment eroded from nearby uplands, creating the once 1,000-foot (300 m)-thick Moenkopi Formation.[52] The formation is made from sandstone and shale with gypsum layers in between.[53] Moenkopi outcrops are found along the Colorado River in Marble Canyon, on Cedar Mountain (a mesa near the southeastern park border), and in Red Butte (located south of Grand Canyon Village).[52] Remnants of the Shinarump Conglomerate, itself a member of the Chinle Formation, are above the Moenkopi Formation near the top of Red Butte but below a much younger lava flow.[52]

Formations totaling over 4,000 to 5,000 feet (1,200 to 1,500 m) in thickness were deposited in the region in the Mesozoic and Cenozoic but were almost entirely removed from the Grand Canyon sequence by subsequent erosion.[54] The geology of the Zion and Kolob canyons area and the geology of the Bryce Canyon area records some of these formations. All these rock units together form a super sequence of rock known as the Grand Staircase.

Cenozoic regional uplift and erosion of the canyon

Uplift and nearby extension

Relief map of the roughly oval shape of the Colorado Plateau surrounding the point where the U.S. States of Utah, Colorado, New Mexico and Arizona meet.
Uplift of the Colorado Plateaus forced rivers to cut down faster.

The Laramide orogeny affected all of western North America by helping to build the American cordillera. The Kaibab Uplift, Monument Upwarp, the Uinta Mountains, San Rafael Swell, and the Rocky Mountains were uplifted, at least in part, by the Laramide orogeny.[55] This major mountain-building event started near the end of the Mesozoic, around 75 million years ago,[52] and continued into the Eocene period of the Cenozoic.[55] It was caused by subduction off the western coast of North America. Major faults that trend north–south and cross the canyon area were reactivated by this uplift.[49] Many of these faults are Precambrian in age and are still active today.[56] Streams draining the Rocky Mountains in early Miocene time terminated in landlocked basins in Utah, Arizona and Nevada but there is no evidence for a major river.[57]

Around 18 million years ago, tensional forces started to thin and drop the region to the west, creating the Basin and Range province.[57] Basins (grabens) dropped down and mountain ranges (horsts) rose up between old and new north–south–trending faults. However, for reasons poorly understood, the beds of the Colorado Plateaus remained mostly horizontal through both events even as they were uplifted about 2 miles (3.2 km) in two pulses.[58][note 2] The extreme western part of the canyon ends at one of the Basin and Range faults, the Grand Wash, which also marks the boundary between the two provinces.[40]

Uplift from the Laramide orogeny and the creation of the Basin and Range province worked together to steepen the gradient of streams flowing west on the Colorado Plateau. These streams cut deep, eastward-growing, channels into the western edge of the Colorado Plateau and deposited their sediment in the widening Basin and Range region.[57]

A 2012 study presents evidence that the western Grand Canyon could be as old as 70 million years.[59]

Colorado River: origin and development

Rifting started to create the Gulf of California far to the south 6 to 10 million years ago.[57] Around the same time, the western edge of the Colorado Plateau may have sagged slightly.[57] Both events changed the direction of many streams toward the sagging region and the increased gradient caused them to downcut much faster. From 5.5 million to 5 million years ago, headward erosion to the north and east consolidated these streams into one major river and associated tributary channels.[60] This river, the ancestral Lower Colorado River, started to fill the northern arm of the gulf, which extended nearly to the site of Hoover Dam, with estuary deposits.[57]
A grayish-colored river with some green vegetation on its banks but small compared to the high reddish and tan walls of the canyon it is in.
The Colorado River had cut down to nearly the current depth of the Grand Canyon by 1.2 million years ago.

At the same time, streams flowed from highlands in central Arizona north and across what is today the western Grand Canyon, possibly feeding a larger river.[61] The mechanism by which the ancestral Lower Colorado River captured this drainage and the drainage from much of the rest of the Colorado Plateau is not known. Possible explanations include headward erosion or a broken natural dam of a lake or river.[61] Whatever the cause, the Lower Colorado probably captured the landlocked Upper Colorado somewhere west of the Kaibab Uplift.[60] The much larger drainage area and yet steeper stream gradient helped to further accelerate downcutting.

Ice ages during the Pleistocene brought a cooler and wetter pluvial climate to the region starting 2 to 3 million years ago.[62] The added precipitation increased runoff and the erosive ability of streams (especially from spring melt water and flash floods in summer).[note 3] With a greatly increased flow volume the Colorado cut faster than ever before and started to quickly excavate the Grand Canyon 2 million years before present, almost reaching the modern depth by 1.2 million years ago.[63]

The resulting Grand Canyon of the Colorado River trends roughly east to west for 278 miles (447 km) between Lake Powell and Lake Mead.[64] In that distance, the Colorado River drops 2,000 feet (610 m) and has excavated an estimated 1,000 cubic miles (4,200 km3) of sediment to form the canyon.[65] This part of the river bisects the 9,000-foot (2,700 m)-high Kaibab Uplift[66] and passes seven plateaus (the Kaibab, Kanab, and Shivwits plateaus bound the northern part of the canyon and the Coconino bounds the southern part).[64] Each of these plateaus are bounded by north to south trending faults and monoclines created or reactivated during the Laramide orogeny. Streams flowing into the Colorado River have since exploited these faults to excavate their own tributary canyons, such as Bright Angel Canyon.[note 4]

Volcanic activity in the western canyon

Dark-colored mass of rock draped over the side of a canyon
Vulcan's Throne volcano above Lava Falls. Lava flows, such as this heavily eroded remnant, once dammed the Colorado River.

Volcanic activity started in Uinkaret volcanic field (in the western Grand Canyon) about 3 million years ago.[67] Over 150 flows of basaltic lava [68] dammed the Colorado River at least 13 times from 725,000 to 100,000 years ago.[69] The dams typically formed in weeks, were 12 to 86 miles (19 to 138 km) long, 150 to 2,000 feet (46 to 610 m) high (thicker upstream and thinner downstream) and had volumes of 0.03 to 1.2 cubic miles (0.13 to 5.00 km3).[70]

The longevity of the dams and their ability to hold Colorado River water in large lakes has been debated. In one hypothesis water from the Colorado River backed up behind the dams in large lakes that extended as far as Moab, Utah.[71] Dams were overtopped in short time; those that were 150 to 400 feet (46 to 122 m) high were overtopped by their lakes in 2 to 17 days.[72] At the same time, sediment filled the lakes behind the dams. Sediment would fill a lake behind a 150-foot (46 m)-high dam in 10.33 months, filled a lake behind an 1,150-foot (350 m)-high dam in 345 years, and filled the lake behind the tallest dam in 3000 years.[72] Cascades of water flowed over a dam while waterfalls migrated up-river along it. Most lava dams lasted for around 10,000 to 20,000 years.[73] However others have proposed that the lava dams were much more ephemeral and failed catastrophically before overtopping.[74] In this model dams would fail due to fluid flow through fractures in the dams and around dam abutments, through permeable river deposits and alluvium.

Since the demise of these dams the Colorado River has carved a maximum of about 160 feet (49 m) into the rocks of the Colorado Plateau [69]

Ongoing geology and human impact


Historic rockfall on the north rim.

The end of the Pleistocene ice ages and the start of the Holocene began to change the area's climate from a cool, wet pluvial one to dryer semi-arid conditions similar to that of today. With less water to cut, the erosive ability of the Colorado was greatly reduced. Mass wasting processes thus began to become relatively more important than they were before. Steeper cliffs and further widening the Grand Canyon and its tributary canyon system occurred. An average of two debris flows per year reach the Colorado River from tributary canyons to form or expand rapids.[75] This type of mass wasting is the main way the smaller and steeper side canyons transport sediment but it also plays a major role in excavating the larger canyons.[75]
An almost white dam stretches to red-colored rock on each side. An arching steel bridge crosses in front of the dam.
Glen Canyon Dam has greatly reduced the amount of sediment transported by the Colorado River through the Grand Canyon.

In 1963 Glen Canyon Dam and other dams farther upstream started to regulate the flow of the Colorado River through Grand Canyon. Pre-dam but still historic flows of the Colorado through Grand Canyon ranged from 700 to 100,000 cubic feet (20 to 2,832 m3) per second with at least one late 19th century flood of 300,000 cubic feet (8,500 m3) per second.[65] Discharge from Glen Canyon Dam exceeds 48,200 cubic feet (1,360 m3) per second only when there is danger of overtopping the dam or when the level of Lake Powell otherwise needs to be lowered.[76]
An interim conservation measure since 1991 has held maximum flows at 20,000 cubic feet (570 m3) per second even though the dam's power plant can handle 13,200 cubic feet (370 m3) per second more flow.[77]

Controlling river flow by use of dams has diminished the river's ability to scour rocks by substantially reducing the amount of sediment it carries.[77] Dams on the Colorado River have also changed the character of the river water. Once both muddy and warm, the river is now clear and averages a 46 °F (8 °C) temperature year-round.[77]
Experimental floods approaching the 48,200 cubic feet (1,360 m3) per second level mentioned above have been carried out in 1996 and 2004 to study the effects on sediment erosion and deposition.[78]

Grand Canyon lies on the southern end of the Intermountain West seismic belt.[79] At least 35 earthquakes larger than 3.0 on the Richter Scale occurred in the Grand Canyon region in the 20th century.[80] Of these, five registered over 5.0 on the Richter Scale and the largest was a 6.2 quake that occurred in January 1906.[80] Major roughly north—south trending faults that cross the canyon are (from west to east), the Grand Wash, Hurricane and Toroweap.[81] Major northeast-trending fracture systems of normal faults that intersect the canyon include the West Kaibab and Bright Angel while northwest-trending systems include the Grandview—Phantom.[82] Most earthquakes in the region occur in a narrow northwest-trending band between the Mesa Butte and West Kaibab fracture systems.[83] These events are probably the result of eastward-migrating crustal stretching that may eventually move past the Grand Canyon area.[83]

Trail of Time and Yavapai Geology Museum


Grand Canyon Trail of Time - Folded Vishnu schist basement rock.

The Trail of Time is an outdoor geology exhibit and nature trail on the South Rim of Grand Canyon National Park. Each meter walked on the trail represents one million years of Grand Canyon's geologic history. Bronze markers on the trail mark your location in time. The trail begins at the Verkamps Visitor Center at 2,000 million years ago, and ends at the Yavapai Geology Museum. Along the way are samples of the Canyon's rocks, as you would encounter them going from the river up to the rim, and displays explaining the geologic history of the Canyon. The trail opened in late 2010.[84]

The Yavapai Geology Museum include three-dimensional models, photographs, and exhibits which allow park visitors to see and understand the complicated geologic story of the area. The museum building, the historic Yavapai Observation Station (built 1928), located one mile (1.6 km) east of Market Plaza, features expansive canyon views. A bookstore offers a variety of materials about the area.[85]

Colorado Plateau


From Wikipedia, the free encyclopedia


A map of the Colorado Plateau.

The Four Corners Monument is where the states of Colorado, New Mexico, Arizona, and Utah meet. (The states are listed in clockwise order.)

The Colorado Plateau, also known as the Colorado Plateau Province, is a physiographic region of the Intermontane Plateaus, roughly centered on the Four Corners region of the southwestern United States. The province covers an area of 337,000 km2 (130,000 mi2) within western Colorado, northwestern New Mexico, southern and eastern Utah, and northern Arizona. About 90% of the area is drained by the Colorado River and its main tributaries: the Green, San Juan, and Little Colorado.[1][2]

The Colorado Plateau is largely made up of high desert, with scattered areas of forests. In the southwest corner of the Colorado Plateau lies the Grand Canyon of the Colorado River. Much of the Plateau's landscape is related, in both appearance and geologic history, to the Grand Canyon. The nickname "Red Rock Country" suggests the brightly colored rock left bare to the view by dryness and erosion. Domes, hoodoos, fins, reefs, goblins, river narrows, natural bridges, and slot canyons are only some of the additional features typical of the Plateau.

The Colorado Plateau has the greatest concentration of U.S. National Park Service (NPS) units in the country. Among its ten National Parks are Grand Canyon, Zion, Bryce Canyon, Capitol Reef, Canyonlands, Arches, Mesa Verde, and Petrified Forest. Among its 17 National Monuments are Dinosaur, Hovenweep, Wupatki, Sunset Crater Volcano, Grand Staircase-Escalante, Natural Bridges, Canyons of the Ancients, Chaco Culture National Historical Park and the Colorado National Monument.

Geography


The Four Corners region and the Colorado Plateau. Click image to see state lines.

The Book Cliffs of western Colorado.

The Green River runs north to south from Wyoming, briefly through Colorado, and converges with the Colorado River in southeastern Utah.

Sunset in Ojito Wilderness, near Albuquerque, NM

The province is bounded by the Rocky Mountains in Colorado, and by the Uinta Mountains and Wasatch Mountains branches of the Rockies in northern and central Utah. It is also bounded by the Rio Grande Rift, Mogollon Rim and the Basin and Range Province. Isolated ranges of the Southern Rocky Mountains such as the San Juan Mountains in Colorado and the La Sal Mountains in Utah intermix into the central and southern parts of the Colorado Plateau. It is composed of seven sections:[3]
As the name implies, the High Plateaus Section is, on average, the highest section. North-south trending normal faults that include the Hurricane, Sevier, Grand Wash, and Paunsaugunt separate the section's component plateaus.[5] This fault pattern is caused by the tensional forces pulling apart the adjacent Basin and Range province to the west, making this section transitional.

Occupying the southeast corner of the Colorado Plateau is the Datil Section. Thick sequences of mid-Tertiary to late-Cenozoic-aged lava covers this section.

Development of the province has in large part been influenced by structural features in its oldest rocks. Part of the Wasatch Line and its various faults form the western edge of the province. Faults that run parallel to the Wasatch Fault that lies along the Wasatch Range form the boundaries between the plateaus in the High Plateaus Section.[6] The Uinta Basin, Uncompahgre Uplift, and the Paradox Basin were also created by movement along structural weaknesses in the region's oldest rock.

In Utah, the province includes several higher fault-separated plateaus:
Some sources also include the Tushar Mountain Plateau as part of the Colorado Plateau, but others do not. The mostly flat-lying sedimentary rock units that make up these plateaus are found in component plateaus that are between 1500 m (5000 ft) to over 3350 m (11,000 ft) above sea level. A supersequence of these rocks is exposed in the various cliffs and canyons (including the Grand Canyon) that make up the Grand Staircase. Increasingly younger east-west trending escarpments of the Grand Staircase extend north of the Grand Canyon and are named for their color:
Within these rocks are abundant mineral resources that include uranium, coal, petroleum, and natural gas. Study of the area's unusually clear geologic history (which is laid bare due to the arid and semiarid conditions) has greatly advanced that science.

A rain shadow from the Sierra Nevada far to the west and the many ranges of the Basin and Range means that the Colorado Plateau receives 15 to 40 cm (6 to 16 in.) of annual precipitation.[8] Higher areas receive more precipitation and are covered in forests of pine, fir, and spruce.

Though it can be said that the Plateau roughly centers on the Four Corners, Black Mesa in northern Arizona is much closer to the east-west, north-south midpoint of the Plateau Province. Lying southeast of Glen Canyon and southwest of Monument Valley at the north end of the Hopi Reservation, this remote coal-laden highland has about half of the Colorado Plateau's acreage north of it, half south of it, half west of it, and half east of it.

History

The Ancestral Puebloan People lived in the region from around 2000 to 700 years ago.[9]

A party from Santa Fe led by Fathers Dominguez and Escalante, unsuccessfully seeking an overland route to California, made a five-month out-and-back trip through much of the Plateau in 1776-1777.[10]

Despite having lost one arm in the American Civil War, U.S. Army Major and geologist John Wesley Powell explored the area in 1869 and 1872. Using fragile boats and small groups of men the Powell Geographic Expedition charted this largely unknown region of the United States for the federal government.

Construction of the Hoover Dam in the 1930s and the Glen Canyon Dam in the 1960s changed the character of the Colorado River. Dramatically reduced sediment load changed its color from reddish brown (Colorado is Spanish for "colored") to mostly clear. The apparent green color is from algae on the riverbed's rocks, not from any significant amount of suspended material. The lack of sediment has also starved sand bars and beaches but an experimental 12 day long controlled flood from Glen Canyon Dam in 1996 showed substantial restoration. Similar floods are planned for every 5 to 10 years.[11]

Geology


The Redwall Limestone cliffs of the Colorado Plateau tower above the northern Mojave Desert.

The Permian through Jurassic stratigraphy of the Colorado Plateau area of southeastern Utah that makes up much of the famous prominent rock formations in protected areas such as Capitol Reef National Park and Canyonlands National Park. From top to bottom: Rounded tan domes of the Navajo Sandstone, layered red Kayenta Formation, cliff-forming, vertically jointed, red Wingate Sandstone, slope-forming, purplish Chinle Formation, layered, lighter-red Moenkopi Formation, and white, layered Cutler Formation sandstone. Picture from Glen Canyon National Recreation Area, Utah.

Erosion-resistant sandstones of Mesozoic age result in bands of continuous cliffs, central Colorado Plateau.

MODIS satellite image of Grand Canyon, Lake Powell (black, left of center) and the Colorado Plateau. White areas are snow-capped.

One of the most geologically intriguing features of the Colorado Plateau is its remarkable stability. Relatively little rock deformation such as faulting and folding has affected this high, thick crustal block within the last 600 million years or so. In contrast, provinces that have suffered severe deformation surround the plateau. Mountain building thrust up the Rocky Mountains to the north and east and tremendous, earth-stretching tension created the Basin and Range province to the west and south. Sub ranges of the Southern Rocky Mountains are scattered throughout the Colorado Plateau.

The Precambrian and Paleozoic history of the Colorado Plateau is best revealed near its southern end where the Grand Canyon has exposed rocks with ages that span almost 2 billion years. The oldest rocks at river level are igneous and metamorphic and have been lumped together as "Vishnu Basement Rocks"; the oldest ages recorded by these rocks fall in the range 1950 to 1680 million years. An erosion surface on the "Vishnu Basement Rocks" is covered by sedimentary rocks and basalt flows, and these rocks formed in the interval from about 1250 to 750 million years ago: in turn, they were uplifted and split into a range of fault-block mountains.[12] Erosion greatly reduced this mountain range prior to the encroachment of a seaway along the passive western edge of the continent in the early Paleozoic. At the canyon rim is the Kaibab Formation, limestone deposited in the late Paleozoic (Permian) about 270 million years ago.

A 12,000 to 15,000 ft. (3700 to 4600 m) high extension of the Ancestral Rocky Mountains called the Uncompahgre Mountains were uplifted and the adjacent Paradox Basin subsided. Almost 4 mi. (6.4 km) of sediment from the mountains and evaporites from the sea were deposited (see geology of the Canyonlands area for detail).[13] Most of the formations were deposited in warm shallow seas and near-shore environments (such as beaches and swamps) as the seashore repeatedly advanced and retreated over the edge of a proto-North America (for detail, see geology of the Grand Canyon area). The province was probably on a continental margin throughout the late Precambrian and most of the Paleozoic era. Igneous rocks injected millions of years later form a marbled network through parts of the Colorado Plateau's darker metamorphic basement. By 600 million years ago North America had been leveled off to a remarkably smooth surface.

Throughout the Paleozoic Era, tropical seas periodically inundated the Colorado Plateau region. Thick layers of limestone, sandstone, siltstone, and shale were laid down in the shallow marine waters. During times when the seas retreated, stream deposits and dune sands were deposited or older layers were removed by erosion. Over 300 million years passed as layer upon layer of sediment accumulated.

It was not until the upheavals that coincided with the formation of the supercontinent Pangea began about 250 million years ago that deposits of marine sediment waned and terrestrial deposits dominate. In late Paleozoic and much of the Mesozoic era the region was affected by a series of orogenies (mountain-building events) that deformed western North America and caused a great deal of uplift. Eruptions from volcanic mountain ranges to the west buried vast regions beneath ashy debris. Short-lived rivers, lakes, and inland seas left sedimentary records of their passage. Streams, ponds and lakes created formations such as the Chinle, Moenave, and Kayenta in the Mesozoic era. Later a vast desert formed the Navajo and Temple Cap formations and dry near-shore environment formed the Carmel (see geology of the Zion and Kolob canyons area for details).

The area was again covered by a warm shallow sea when the Cretaceous Seaway opened in late Mesozoic time. The Dakota Sandstone and the Tropic Shale were deposited in the warm shallow waters of this advancing and retreating seaway. Several other formations were also created but were mostly eroded following two major periods of uplift.

The Laramide orogeny closed the seaway and uplifted a large belt of crust from Montana to Mexico, with the Colorado Plateau region being the largest block. Thrust faults in Colorado are thought to have formed from a slight clockwise movement of the region, which acted as a rigid crustal block. The Colorado Plateau Province was uplifted largely as a single block, possibly due to its relative thickness. This relative thickness may be why compressional forces from the orogeny were mostly transmitted through the province instead of deforming it.[6] Pre-existing weaknesses in Precambrian rocks were exploited and reactivated by the compression. It was along these ancient faults and other deeply buried structures that much of the province's relatively small and gently inclined flexures (such as anticlines, synclines, and monoclines) formed.[6] Some of the prominent isolated mountain ranges of the Plateau, such as Ute Mountain and the Carrizo Mountains, both near the Four Corners, are cored by igneous rocks that were emplaced about 70 million years ago.

Minor uplift events continued through the start of the Cenozoic era and were accompanied by some basaltic lava eruptions and mild deformation. The colorful Claron Formation that forms the delicate hoodoos of Bryce Amphitheater and Cedar Breaks was then laid down as sediments in cool streams and lakes (see geology of the Bryce Canyon area for details). The flat-lying Chuska Sandstone was deposited about 34 million years ago; the sandstone is predominantly of eolian origin and locally more than 500 meters thick. The Chuska Sandstone caps the Chuska mountains, and it lies unconformably on Mesozoic rocks deformed during the Laramide orogeny.

Younger igneous rocks form spectacular topographic features. The Henry Mountains, La Sal Range, and Abajo Mountains, ranges that dominate many views in southeastern Utah, are formed about igneous rocks that were intruded in the interval from 20 to 31 million years: some igneous intrusions in these mountains form laccoliths, a form of intrusion recognized by Grove Karl Gilbert during his studies of the Henry Mountains. Ship Rock (also called Shiprock), in northwestern New Mexico, and Church Rock and Agathla, near Monument Valley, are erosional remnants of potassium-rich igneous rocks and associated breccias of the Navajo Volcanic Field, produced about 25 million years ago. The Hopi Buttes in northeastern Arizona are held up by resistant sheets of sodic volcanic rocks, extruded about 7 million years ago. More recent igneous rocks are concentrated nearer the margins of the Colorado Plateau. The San Francisco Peaks near Flagstaff, south of the Grand Canyon, are volcanic landforms produced by igneous activity that began in that area about 6 million years ago and continued until 1064 C.E., when basalt erupted in Sunset Crater National Monument. Mount Taylor, near Grants, New Mexico, is a volcanic structure with a history similar to that of the San Francisco Peaks: a basalt flow closer to Grants was extruded only about 3000 years ago (see El Malpais National Monument). These young igneous rocks may record processes in the Earth's mantle that are eating away at deep margins of the relatively stable block of the Plateau.

Tectonic activity resumed in Mid Cenozoic time and started to unevenly uplift and slightly tilt the Colorado Plateau region and the region to the west some 20 million years ago (as much as 3 kilometers of uplift occurred). Streams had their gradient increased and they responded by downcutting faster. Headward erosion and mass wasting helped to erode cliffs back into their fault-bounded plateaus, widening the basins in-between. Some plateaus have been so severely reduced in size this way that they become mesas or even buttes. Monoclines form as a result of uplift bending the rock units. Eroded monoclines leave steeply tilted resistant rock called a hogback and the less steep version is a cuesta.

Cliffs of Navajo Sandstone in Zion National Park

Great tension developed in the crust, probably related to changing plate motions far to the west. As the crust stretched, the Basin and Range province broke up into a multitude of down-dropped valleys and elongate mountains. Major faults, such as the Hurricane Fault, developed that separate the two regions. The dry climate was in large part a rainshadow effect resulting from the rise of the Sierra Nevada further west. Yet for some reason not fully understood, the neighboring Colorado Plateau was able to preserve its structural integrity and remained a single tectonic block.

A second mystery was that while the lower layers of the Plateau appeared to be sinking, overall the Plateau was rising. The reason for this was discovered upon analyzing data from the USARRAY project. It was found that the asthenosphere had invaded the overlying lithosphere. The asthenosphere erodes the lower levels of the Plateau. At the same time, as it cools, it expands and lifts the upper layers of the Plateau.[14] Eventually, the great block of Colorado Plateau crust rose a kilometer higher than the Basin and Range. As the land rose, the streams responded by cutting ever deeper stream channels. The most well-known of these streams, the Colorado River, began to carve the Grand Canyon less than 6 million years ago in response to sagging caused by the opening of the Gulf of California to the southwest.

The Pleistocene epoch brought periodic ice ages and a cooler, wetter climate. This increased erosion at higher elevations with the introduction of alpine glaciers while mid-elevations were attacked by frost wedging and lower areas by more vigorous stream scouring. Pluvial lakes also formed during this time. Glaciers and pluvial lakes disappeared and the climate warmed and became drier with the start of Holocene epoch.

Energy generation


Coal mine in Carbon County, UT.

Electrical power generation is one of the major industries that takes place in the Colorado Plateau region. Most electrical generation comes from coal fired power plants.

Natural resources

Petroleum

The rocks of the Colorado Plateau are a source of oil and a major source of natural gas. Major petroleum deposits are present in the San Juan Basin of New Mexico and Colorado, the Uinta Basin of Utah, the Piceance Basin of Colorado, and the Paradox Basin of Utah, Colorado, and Arizona.

Uranium

The Colorado Plateau holds major uranium deposits, and there was a uranium boom in the 1950s. The Atlas Uranium Mill near Moab has left a problematic tailings pile for cleanup,which is soon to happen.

Coal

Major coal deposits are being mined in the Colorado Plateau in Utah, Arizona, Colorado, and New Mexico, though large coal mining projects, such as on the Kaiparowits Plateau, have been proposed and defeated politically. The ITT Power Project, eventually located in Lynndyl, Utah, near Delta, was originally suggested for Salt Wash near Capitol Reef National Park. After a firestorm of opposition, it was moved to a less beloved site. In Utah the largest deposits are in aptly named Carbon County. In Arizona the biggest operation is on Black Mesa, supplying coal to Navajo Power Plant.

Gilsonite and uintaite

Perhaps the only one of its kind, a gilsonite plant near Bonanza, southeast of Vernal, Utah, mines this unique, lustrous, brittle form of asphalt, for use in "varnishes, paints,...ink, waterproofing compounds, electrical insulation,...roofing materials."[15]

Scenic beauty

The scenic appeal of this unique landscape had become, well before the end of the twentieth century, its greatest financial natural resource. The amount of commercial benefit to the four states of the Colorado Plateau from tourism exceeded that of any other natural resource.[citation needed]

Protected lands


Erosional features within Glen Canyon National Recreation Area.

This relatively high semi-arid province produces many distinctive erosional features such as arches, arroyos, canyons, cliffs, fins, natural bridges, pinnacles, hoodoos, and monoliths that, in various places and extents, have been protected. Also protected are areas of historic or cultural significance, such as the pueblos of the Anasazi culture. There are nine U.S. National Parks, a National Historical Park, sixteen U.S. National Monuments and dozens of wilderness areas in the province along with millions of acres in U.S. National Forests, many state parks, and other protected lands. In fact, this region has the highest concentration of parklands in North America.[16] Lake Powell, in foreground, is not a natural lake but a reservoir impounded by Glen Canyon Dam.

National parks (from south to north to south clockwise):
National Monuments (alphabetical):
Wilderness areas:
Other notable protected areas include: Glen Canyon National Recreation Area, Dead Horse Point State Park, Goosenecks State Park, the San Rafael Swell, the Grand Gulch Primitive Area, Kodachrome Basin State Park, Goblin Valley State Park, Monument Valley, and Barringer Crater.

Sedona, Arizona and Oak Creek Canyon lie on the south-central border of the Plateau. Many but not all of the Sedona area's cliff formations are protected as wilderness. The area has the visual appeal of a national park, but with a small, rapidly growing town in the center.

Japan space scientists make wireless energy breakthrough

Original link:  http://phys.org/news/2015-03-japan-space-scientists-wireless-energy.html
Mar 12, 2015


Electricity gained from solar panels in space could one day be beamed to earth 

Electricity gained from solar panels in space could one day be beamed to earth

Japanese scientists have succeeded in transmitting energy wirelessly, in a key step that could one day make solar power generation in space a possibility, an official said Thursday.

Researchers used microwaves to deliver 1.8 kilowatts of power—enough to run an electric kettle—through the air with pinpoint accuracy to a receiver 55 metres (170 feet) away.

While the distance was not huge, the technology could pave the way for mankind to eventually tap the vast amount of available in space and use it here on Earth, a spokesman for The Japan Aerospace Exploration Agency (JAXA) said.

"This was the first time anyone has managed to send a high output of nearly two kilowatts of via microwaves to a small target, using a delicate directivity control device," he said.

JAXA has been working on devising Space Solar Power Systems for years, the spokesman said.

Solar power generation in space has many advantages over its Earth-based cousin, notably the permanent availability of energy, regardless of weather or time of day.

While man-made satellites, such as the International Space Station, have long since been able to use the solar energy that washes over them from the sun, getting that power down to Earth where people can use it has been the thing of science fiction.

But the Japanese research offers the possibility that humans will one day be able to farm an inexhaustible source of energy in space.

The idea, said the JAXA spokesman, would be for microwave-transmitting solar satellites—which would have sunlight-gathering panels and antennae—to be set up about 36,000 kilometres (22,300 miles) from the earth.

"But it could take decades before we see practical application of the technology—maybe in the 2040s or later," he said.

"There are a number of challenges to overcome, such as how to send huge structures into space, how to construct them and how to maintain them."

The idea of space-based emerged among US researchers in the 1960s and Japan's SSPS programme, chiefly financed by the industry ministry, started in 2009, he said.

Resource-poor Japan has to import huge amounts of fossil fuel. It has become substantially more dependent on these imports as its nuclear power industry shut down in the aftermath of the disaster at Fukushima in 2011.

Representation of a Lie group

From Wikipedia, the free encyclopedia https://en.wikipedia.org/wiki/Representation_of_a_Lie_group...